! Started logfile: .//J1825+5753_X_dfm.log on Wed Nov 16 12:05:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1825+5753_X_uva.fits
! Reading UV FITS file: .//J1825+5753_X_uva.fits
! AN table 1: 67 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.876617 visibilities/baseline/integration-bin.
! Found source: J1825+5753
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 21144 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1825+5753_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000728Jy  sigma=32.931694
! Fit after  self-cal, rms=0.958628Jy  sigma=31.539600
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.759 mas, bmaj=1.487 mas, bpa=-6.269 degrees
! Estimated noise=0.251526 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0303334 Jy
! Component: 100  -  total flux cleaned = 0.0377115 Jy
! Total flux subtracted in 100 components = 0.0377115 Jy
! Clean residual min=-0.001474 max=0.002951 Jy/beam
! Clean residual mean=0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0377115 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0377115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025312Jy  sigma=0.768781
! Fit after  self-cal, rms=0.024543Jy  sigma=0.743839
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00344987 Jy
! Component: 100  -  total flux cleaned = 0.00525444 Jy
! Total flux subtracted in 100 components = 0.00525444 Jy
! Clean residual min=-0.001212 max=0.002229 Jy/beam
! Clean residual mean=0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0429659 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.0429659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023720Jy  sigma=0.713262
! Fit after  self-cal, rms=0.023717Jy  sigma=0.713045
! Inverting map 
! Added new window around map position (1.6, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207914 Jy
! Component: 100  -  total flux cleaned = 0.00328688 Jy
! Total flux subtracted in 100 components = 0.00328688 Jy
! Clean residual min=-0.001145 max=0.001727 Jy/beam
! Clean residual mean=-0.000000 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.0462528 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.0462528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023384Jy  sigma=0.700415
! Fit after  self-cal, rms=0.023358Jy  sigma=0.699527
! Inverting map 
! Added new window around map position (3.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016056 Jy
! Component: 100  -  total flux cleaned = 0.00266678 Jy
! Total flux subtracted in 100 components = 0.00266678 Jy
! Clean residual min=-0.001017 max=0.000988 Jy/beam
! Clean residual mean=-0.000001 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.0489196 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.0489196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023165Jy  sigma=0.692282
! Fit after  self-cal, rms=0.023154Jy  sigma=0.691946
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9719 mas, bmaj=1.843 mas, bpa=-7.667 degrees
! Estimated noise=0.15089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183119 Jy
! Component: 100  -  total flux cleaned = 0.00304959 Jy
! Component: 150  -  total flux cleaned = 0.00389931 Jy
! Component: 200  -  total flux cleaned = 0.00452367 Jy
! Total flux subtracted in 200 components = 0.00452367 Jy
! Clean residual min=-0.000641 max=0.000922 Jy/beam
! Clean residual mean=-0.000004 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0534432 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 52 components and 0.0534432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022982Jy  sigma=0.685741
! Fit after  self-cal, rms=0.022972Jy  sigma=0.685368
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9719 x 1.843 at -7.667 degrees (North through East)
! Clean map  min=-0.00060454  max=0.041111 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.08     KP        1.09     
!   LA        0.96     MK        1.04     NL        1.04     OV        0.98     
!   PT        0.94     SC        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.08     KP        1.05     
!   LA        0.97     MK        1.04     NL        1.05     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        1.04     
!   LA        0.93     MK        1.02     NL        1.08     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.01     KP        1.06     
!   LA        0.96     MK        0.99     NL        1.04     OV        0.99     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.93     HN        1.05     KP        1.01     
!   LA        0.96     MK        0.97     NL        1.04     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.89     HN        0.98     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        0.97     KP        1.05     
!   LA        0.96     MK        1.00     NL        1.03     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.90     HN        1.04     KP        1.06     
!   LA        0.97     MK        1.02     NL        1.07     OV        0.96     
!   PT        0.97     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.022972Jy  sigma=0.685368
! Fit after  self-cal, rms=0.022651Jy  sigma=0.680282
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9788 mas, bmaj=1.849 mas, bpa=-7.457 degrees
! Estimated noise=0.150156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.4, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560364 Jy
! Component: 100  -  total flux cleaned = 0.000684112 Jy
! Component: 150  -  total flux cleaned = 0.000756285 Jy
! Component: 200  -  total flux cleaned = 0.000807831 Jy
! Total flux subtracted in 200 components = 0.000807831 Jy
! Clean residual min=-0.000499 max=0.000483 Jy/beam
! Clean residual mean=-0.000003 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0542511 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.0542511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022631Jy  sigma=0.679553
! Fit after  self-cal, rms=0.022626Jy  sigma=0.679418
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022626Jy  sigma=0.679418
! Fit after  self-cal, rms=0.022634Jy  sigma=0.677692
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9773 mas, bmaj=1.849 mas, bpa=-7.652 degrees
! Estimated noise=0.150107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119611 Jy
! Component: 100  -  total flux cleaned = 0.00017867 Jy
! Component: 150  -  total flux cleaned = 0.000207625 Jy
! Component: 200  -  total flux cleaned = 0.000233193 Jy
! Total flux subtracted in 200 components = 0.000233193 Jy
! Clean residual min=-0.000437 max=0.000454 Jy/beam
! Clean residual mean=-0.000002 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0544842 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.0544842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022628Jy  sigma=0.677499
! Fit after  self-cal, rms=0.022629Jy  sigma=0.677467
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.03928e-05 Jy
! Component: 100  -  total flux cleaned = 3.37119e-05 Jy
! Component: 150  -  total flux cleaned = 4.97647e-05 Jy
! Component: 200  -  total flux cleaned = 6.49726e-05 Jy
! Total flux subtracted in 200 components = 6.49726e-05 Jy
! Clean residual min=-0.000434 max=0.000455 Jy/beam
! Clean residual mean=-0.000002 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0545492 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.0545492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022626Jy  sigma=0.677380
! Fit after  self-cal, rms=0.022626Jy  sigma=0.677374
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022626Jy  sigma=0.677374
! Fit after  self-cal, rms=0.022609Jy  sigma=0.676419
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.976 mas, bmaj=1.852 mas, bpa=-7.741 degrees
! Estimated noise=0.149933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.6296e-06 Jy
! Component: 100  -  total flux cleaned = -2.86826e-06 Jy
! Component: 150  -  total flux cleaned = 2.21747e-06 Jy
! Component: 200  -  total flux cleaned = 6.62099e-06 Jy
! Total flux subtracted in 200 components = 6.62099e-06 Jy
! Clean residual min=-0.000451 max=0.000465 Jy/beam
! Clean residual mean=-0.000001 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0545558 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 103 components and 0.0545558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022606Jy  sigma=0.676336
! Fit after  self-cal, rms=0.022607Jy  sigma=0.676318
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.8, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168091 Jy
! Component: 100  -  total flux cleaned = 0.000156149 Jy
! Component: 150  -  total flux cleaned = 0.000157111 Jy
! Component: 200  -  total flux cleaned = 0.000139484 Jy
! Total flux subtracted in 200 components = 0.000139484 Jy
! Clean residual min=-0.000465 max=0.000448 Jy/beam
! Clean residual mean=-0.000002 rms=0.000107 Jy/beam
! Combined flux in latest and established models = 0.0546953 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 118 components and 0.0546953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022598Jy  sigma=0.676025
! Fit after  self-cal, rms=0.022597Jy  sigma=0.676002
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022597Jy  sigma=0.676002
! Fit after  self-cal, rms=0.022583Jy  sigma=0.675887
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=2.777 mas, bpa=-9.557 degrees
! Estimated noise=0.186621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.2025e-05 Jy
! Component: 100  -  total flux cleaned = 1.4073e-05 Jy
! Component: 150  -  total flux cleaned = 3.45109e-05 Jy
! Component: 200  -  total flux cleaned = 4.76295e-05 Jy
! Total flux subtracted in 200 components = 4.76295e-05 Jy
! Clean residual min=-0.000450 max=0.000452 Jy/beam
! Clean residual mean=-0.000003 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0547429 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 126 components and 0.0547429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022581Jy  sigma=0.675844
! Fit after  self-cal, rms=0.022580Jy  sigma=0.675831
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.04042e-05 Jy
! Component: 100  -  total flux cleaned = 5.13712e-05 Jy
! Component: 150  -  total flux cleaned = 7.44041e-05 Jy
! Component: 200  -  total flux cleaned = 8.8177e-05 Jy
! Total flux subtracted in 200 components = 8.8177e-05 Jy
! Clean residual min=-0.000448 max=0.000452 Jy/beam
! Clean residual mean=-0.000003 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.0548311 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 132 components and 0.0548311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022580Jy  sigma=0.675824
! Fit after  self-cal, rms=0.022579Jy  sigma=0.675818
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9755 mas, bmaj=1.853 mas, bpa=-7.79 degrees
! Estimated noise=0.149849 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9755 x 1.853 at -7.79 degrees (North through East)
! Clean map  min=-0.00043232  max=0.04086 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7579 mas, bmaj=1.493 mas, bpa=-6.488 degrees
! Estimated noise=0.251618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0305602 Jy
! Component: 100  -  total flux cleaned = 0.0381807 Jy
! Component: 150  -  total flux cleaned = 0.0417232 Jy
! Component: 200  -  total flux cleaned = 0.0440565 Jy
! Total flux subtracted in 200 components = 0.0440565 Jy
! Clean residual min=-0.001001 max=0.001364 Jy/beam
! Clean residual mean=0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0440565 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0440565 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9755 mas, bmaj=1.853 mas, bpa=-7.79 degrees
! Estimated noise=0.149849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320083 Jy
! Component: 100  -  total flux cleaned = 0.0053132 Jy
! Component: 150  -  total flux cleaned = 0.0067622 Jy
! Component: 200  -  total flux cleaned = 0.00776766 Jy
! Total flux subtracted in 200 components = 0.00776766 Jy
! Clean residual min=-0.000557 max=0.000597 Jy/beam
! Clean residual mean=0.000000 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0518242 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 34 components and 0.0518242 Jy
! Inverting map 
! Added new window around map position (48.4, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000757099 Jy
! Component: 100  -  total flux cleaned = 0.00135342 Jy
! Component: 150  -  total flux cleaned = 0.00174397 Jy
! Component: 200  -  total flux cleaned = 0.00201086 Jy
! Total flux subtracted in 200 components = 0.00201086 Jy
! Clean residual min=-0.000488 max=0.000475 Jy/beam
! Clean residual mean=-0.000001 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.053835 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 64 components and 0.053835 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=2.777 mas, bpa=-9.557 degrees
! Estimated noise=0.186621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000525537 Jy
! Component: 100  -  total flux cleaned = 0.000733392 Jy
! Component: 150  -  total flux cleaned = 0.000820733 Jy
! Component: 200  -  total flux cleaned = 0.00088534 Jy
! Total flux subtracted in 200 components = 0.00088534 Jy
! Clean residual min=-0.000423 max=0.000483 Jy/beam
! Clean residual mean=-0.000003 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.0547204 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.57938e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104878 Jy
! Component: 150  -  total flux cleaned = 0.000130228 Jy
! Component: 200  -  total flux cleaned = 0.000153143 Jy
! Total flux subtracted in 200 components = 0.000153143 Jy
! Clean residual min=-0.000422 max=0.000478 Jy/beam
! Clean residual mean=-0.000003 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.0548735 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 127 components and 0.0548735 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9755 mas, bmaj=1.853 mas, bpa=-7.79 degrees
! Estimated noise=0.149849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.24135e-05 Jy
! Component: 100  -  total flux cleaned = 6.1245e-05 Jy
! Component: 150  -  total flux cleaned = 4.46654e-05 Jy
! Component: 200  -  total flux cleaned = 3.7068e-05 Jy
! Total flux subtracted in 200 components = 3.7068e-05 Jy
! Clean residual min=-0.000462 max=0.000461 Jy/beam
! Clean residual mean=-0.000002 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.0549106 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 140 components and 0.0549106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022577Jy  sigma=0.675765
! Fit after  self-cal, rms=0.022574Jy  sigma=0.675694
wmodel /J1825+5753_X_map.mod
! wmodel: Unable to open new model file: /J1825+5753_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1825+5753_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9755 x 1.853 at -7.79 degrees (North through East)
! Clean map  min=-0.00042675  max=0.040902 Jy/beam
! Writing clean map to FITS file: .//J1825+5753_X_map.fits
wmodel .//J1825+5753_X_map.mod
! Writing 140 model components to file: .//J1825+5753_X_map.mod
wobs   .//J1825+5753_X_uvs.fits
! Writing UV FITS file: .//J1825+5753_X_uvs.fits
wwins  .//J1825+5753_X_map.win
! wwins: Wrote 6 windows to .//J1825+5753_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0409015 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000104374 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.765554 0.765554 1.53111 3.06222 6.12443 12.2489 24.4977 48.9955 97.9909
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.04 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  391.873 
quit
! Quitting program
! Log file .//J1825+5753_X_dfm.log closed on Wed Nov 16 12:05:17 2016