! Started logfile: .//J1807-2506_X_dfm.log on Wed Nov 16 12:04:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1807-2506_X_uvm.fits
! Reading UV FITS file: .//J1807-2506_X_uvm.fits
! AN table 1: 138 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.840902 visibilities/baseline/integration-bin.
! Found source: J1807-2506
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 41776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1807-2506_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 146 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005100Jy  sigma=24.807601
! Fit after  self-cal, rms=0.884367Jy  sigma=21.688588
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7098 mas, bmaj=2.078 mas, bpa=-11.32 degrees
! Estimated noise=0.294876 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0750604 Jy
! Component: 100  -  total flux cleaned = 0.101348 Jy
! Total flux subtracted in 100 components = 0.101348 Jy
! Clean residual min=-0.004282 max=0.012858 Jy/beam
! Clean residual mean=-0.000021 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 0.101348 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.101348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048588Jy  sigma=1.146278
! Fit after  self-cal, rms=0.048570Jy  sigma=1.145819
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152034 Jy
! Component: 100  -  total flux cleaned = 0.0243221 Jy
! Total flux subtracted in 100 components = 0.0243221 Jy
! Clean residual min=-0.002964 max=0.005327 Jy/beam
! Clean residual mean=-0.000014 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.12567 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.12567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038721Jy  sigma=0.841985
! Fit after  self-cal, rms=0.038705Jy  sigma=0.841610
! Inverting map 
! Added new window around map position (-1, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00638621 Jy
! Component: 100  -  total flux cleaned = 0.010834 Jy
! Total flux subtracted in 100 components = 0.010834 Jy
! Clean residual min=-0.002376 max=0.003405 Jy/beam
! Clean residual mean=-0.000011 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.136504 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.136504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036212Jy  sigma=0.757555
! Fit after  self-cal, rms=0.036188Jy  sigma=0.757052
! Inverting map 
! Added new window around map position (-1.6, 3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00366997 Jy
! Component: 100  -  total flux cleaned = 0.00628912 Jy
! Total flux subtracted in 100 components = 0.00628912 Jy
! Clean residual min=-0.002058 max=0.003047 Jy/beam
! Clean residual mean=-0.000009 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.142793 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.142793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035375Jy  sigma=0.729462
! Fit after  self-cal, rms=0.035352Jy  sigma=0.728785
! Inverting map 
! Added new window around map position (-0.8, -5.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00288539 Jy
! Component: 100  -  total flux cleaned = 0.00489802 Jy
! Total flux subtracted in 100 components = 0.00489802 Jy
! Clean residual min=-0.001827 max=0.002532 Jy/beam
! Clean residual mean=-0.000007 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.147691 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 38 components and 0.147691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034912Jy  sigma=0.715438
! Fit after  self-cal, rms=0.034901Jy  sigma=0.715054
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=2.68 mas, bpa=-8.943 degrees
! Estimated noise=0.145609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00388177 Jy
! Component: 100  -  total flux cleaned = 0.00600137 Jy
! Component: 150  -  total flux cleaned = 0.00741198 Jy
! Component: 200  -  total flux cleaned = 0.00840142 Jy
! Total flux subtracted in 200 components = 0.00840142 Jy
! Clean residual min=-0.001858 max=0.002536 Jy/beam
! Clean residual mean=-0.000009 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.156093 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 61 components and 0.156093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034507Jy  sigma=0.701169
! Fit after  self-cal, rms=0.034503Jy  sigma=0.701025
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 2.68 at -8.943 degrees (North through East)
! Clean map  min=-0.0018227  max=0.11453 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.02     KP        1.04     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.00     KP        1.03     
!   LA        1.00     MK        1.01     NL        1.02     OV        0.97     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        1.00     KP        1.05     
!   LA        1.01     MK        1.01     NL        1.00     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     HN        1.00     KP        1.04     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.01     KP        1.03     
!   LA        1.00     MK        0.97     NL        0.99     OV        0.95     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        0.96     KP        1.02     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.96     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        0.99     KP        1.02     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.96     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        0.99     KP        1.01     
!   LA        0.98     MK        0.98     NL        1.00     OV        0.96     
!   PT        0.99     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.034503Jy  sigma=0.701025
! Fit after  self-cal, rms=0.033626Jy  sigma=0.684735
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=2.669 mas, bpa=-8.646 degrees
! Estimated noise=0.144228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000737704 Jy
! Component: 100  -  total flux cleaned = -0.000896451 Jy
! Component: 150  -  total flux cleaned = -0.00102166 Jy
! Component: 200  -  total flux cleaned = -0.00110587 Jy
! Total flux subtracted in 200 components = -0.00110587 Jy
! Clean residual min=-0.001332 max=0.001403 Jy/beam
! Clean residual mean=-0.000005 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.154987 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 77 components and 0.154987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033582Jy  sigma=0.683058
! Fit after  self-cal, rms=0.033579Jy  sigma=0.682943
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033579Jy  sigma=0.682943
! Fit after  self-cal, rms=0.032085Jy  sigma=0.640975
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=2.675 mas, bpa=-8.749 degrees
! Estimated noise=0.143952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100723 Jy
! Component: 100  -  total flux cleaned = -0.00126848 Jy
! Component: 150  -  total flux cleaned = -0.00139511 Jy
! Component: 200  -  total flux cleaned = -0.00148636 Jy
! Total flux subtracted in 200 components = -0.00148636 Jy
! Clean residual min=-0.001280 max=0.001104 Jy/beam
! Clean residual mean=0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.153501 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.153501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032044Jy  sigma=0.639756
! Fit after  self-cal, rms=0.032045Jy  sigma=0.639679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000174595 Jy
! Component: 100  -  total flux cleaned = -0.00023583 Jy
! Component: 150  -  total flux cleaned = -0.000263814 Jy
! Component: 200  -  total flux cleaned = -0.000302194 Jy
! Total flux subtracted in 200 components = -0.000302194 Jy
! Clean residual min=-0.001267 max=0.001075 Jy/beam
! Clean residual mean=0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.153198 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 104 components and 0.153198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032033Jy  sigma=0.639323
! Fit after  self-cal, rms=0.032032Jy  sigma=0.639313
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032032Jy  sigma=0.639313
! Fit after  self-cal, rms=0.031829Jy  sigma=0.631045
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=2.674 mas, bpa=-8.696 degrees
! Estimated noise=0.143266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000636475 Jy
! Component: 100  -  total flux cleaned = -0.000801111 Jy
! Component: 150  -  total flux cleaned = -0.000874602 Jy
! Component: 200  -  total flux cleaned = -0.000912216 Jy
! Total flux subtracted in 200 components = -0.000912216 Jy
! Clean residual min=-0.000764 max=0.001093 Jy/beam
! Clean residual mean=-0.000003 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.152286 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 113 components and 0.152286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031806Jy  sigma=0.630482
! Fit after  self-cal, rms=0.031812Jy  sigma=0.630452
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.2, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000953634 Jy
! Component: 100  -  total flux cleaned = 0.00140048 Jy
! Component: 150  -  total flux cleaned = 0.00152313 Jy
! Component: 200  -  total flux cleaned = 0.00157124 Jy
! Total flux subtracted in 200 components = 0.00157124 Jy
! Clean residual min=-0.000705 max=0.000773 Jy/beam
! Clean residual mean=-0.000001 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.153857 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 139 components and 0.153857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031786Jy  sigma=0.629407
! Fit after  self-cal, rms=0.031786Jy  sigma=0.629392
! Inverting map 
! Added new window around map position (-20.2, 29.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000727302 Jy
! Component: 100  -  total flux cleaned = 0.000943947 Jy
! Component: 150  -  total flux cleaned = 0.000968035 Jy
! Component: 200  -  total flux cleaned = 0.00096851 Jy
! Total flux subtracted in 200 components = 0.00096851 Jy
! Clean residual min=-0.000749 max=0.000674 Jy/beam
! Clean residual mean=0.000001 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.154826 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 157 components and 0.154826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031762Jy  sigma=0.628985
! Fit after  self-cal, rms=0.031760Jy  sigma=0.628930
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031760Jy  sigma=0.628930
! Fit after  self-cal, rms=0.031660Jy  sigma=0.628703
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.271 mas, bmaj=5.319 mas, bpa=-7.129 degrees
! Estimated noise=0.171028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014635 Jy
! Component: 100  -  total flux cleaned = -6.00977e-05 Jy
! Component: 150  -  total flux cleaned = -5.87338e-05 Jy
! Component: 200  -  total flux cleaned = -4.65425e-05 Jy
! Total flux subtracted in 200 components = -4.65425e-05 Jy
! Clean residual min=-0.000836 max=0.000861 Jy/beam
! Clean residual mean=0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.154779 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 176 components and 0.154779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031645Jy  sigma=0.628500
! Fit after  self-cal, rms=0.031645Jy  sigma=0.628465
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.55821e-05 Jy
! Component: 100  -  total flux cleaned = 4.84896e-05 Jy
! Component: 150  -  total flux cleaned = 5.83639e-05 Jy
! Component: 200  -  total flux cleaned = 6.77751e-05 Jy
! Total flux subtracted in 200 components = 6.77751e-05 Jy
! Clean residual min=-0.000791 max=0.000814 Jy/beam
! Clean residual mean=0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.154847 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 189 components and 0.154847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031640Jy  sigma=0.628429
! Fit after  self-cal, rms=0.031640Jy  sigma=0.628421
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=2.674 mas, bpa=-8.624 degrees
! Estimated noise=0.142652 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 2.674 at -8.624 degrees (North through East)
! Clean map  min=-0.00065536  max=0.11296 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7079 mas, bmaj=2.077 mas, bpa=-11.02 degrees
! Estimated noise=0.287742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0731902 Jy
! Component: 100  -  total flux cleaned = 0.0992567 Jy
! Component: 150  -  total flux cleaned = 0.114296 Jy
! Component: 200  -  total flux cleaned = 0.123648 Jy
! Total flux subtracted in 200 components = 0.123648 Jy
! Clean residual min=-0.002036 max=0.005192 Jy/beam
! Clean residual mean=-0.000011 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.123648 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.123648 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=2.674 mas, bpa=-8.624 degrees
! Estimated noise=0.142652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130693 Jy
! Component: 100  -  total flux cleaned = 0.0192689 Jy
! Component: 150  -  total flux cleaned = 0.0224976 Jy
! Component: 200  -  total flux cleaned = 0.0244239 Jy
! Total flux subtracted in 200 components = 0.0244239 Jy
! Clean residual min=-0.000811 max=0.001317 Jy/beam
! Clean residual mean=-0.000007 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.148072 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 41 components and 0.148072 Jy
! Inverting map 
! Added new window around map position (1.8, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144757 Jy
! Component: 100  -  total flux cleaned = 0.00256428 Jy
! Component: 150  -  total flux cleaned = 0.00347925 Jy
! Component: 200  -  total flux cleaned = 0.00424412 Jy
! Total flux subtracted in 200 components = 0.00424412 Jy
! Clean residual min=-0.000679 max=0.000862 Jy/beam
! Clean residual mean=-0.000002 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.152316 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 81 components and 0.152316 Jy
! Inverting map 
! Added new window around map position (-27.4, -37.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754663 Jy
! Component: 100  -  total flux cleaned = 0.00108263 Jy
! Component: 150  -  total flux cleaned = 0.00128931 Jy
! Component: 200  -  total flux cleaned = 0.00143995 Jy
! Total flux subtracted in 200 components = 0.00143995 Jy
! Clean residual min=-0.000672 max=0.000700 Jy/beam
! Clean residual mean=-0.000002 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.153756 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 108 components and 0.153755 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.271 mas, bmaj=5.319 mas, bpa=-7.129 degrees
! Estimated noise=0.171028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184002 Jy
! Component: 100  -  total flux cleaned = 0.000366689 Jy
! Component: 150  -  total flux cleaned = 0.000523881 Jy
! Component: 200  -  total flux cleaned = 0.000585474 Jy
! Total flux subtracted in 200 components = 0.000585474 Jy
! Clean residual min=-0.000709 max=0.000873 Jy/beam
! Clean residual mean=-0.000002 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.154341 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.87082e-05 Jy
! Component: 100  -  total flux cleaned = 5.56571e-05 Jy
! Component: 150  -  total flux cleaned = 8.10508e-05 Jy
! Component: 200  -  total flux cleaned = 8.15101e-05 Jy
! Total flux subtracted in 200 components = 8.15101e-05 Jy
! Clean residual min=-0.000709 max=0.000867 Jy/beam
! Clean residual mean=-0.000002 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.154422 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 146 components and 0.154422 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=2.674 mas, bpa=-8.624 degrees
! Estimated noise=0.142652 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000239174 Jy
! Component: 100  -  total flux cleaned = -0.000223813 Jy
! Component: 150  -  total flux cleaned = -0.000209685 Jy
! Component: 200  -  total flux cleaned = -0.000209507 Jy
! Total flux subtracted in 200 components = -0.000209507 Jy
! Clean residual min=-0.000628 max=0.000671 Jy/beam
! Clean residual mean=-0.000001 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.154213 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 167 components and 0.154213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031604Jy  sigma=0.627836
! Fit after  self-cal, rms=0.031600Jy  sigma=0.627730
wmodel /J1807-2506_X_map.mod
! wmodel: Unable to open new model file: /J1807-2506_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1807-2506_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 2.674 at -8.624 degrees (North through East)
! Clean map  min=-0.00057573  max=0.11265 Jy/beam
! Writing clean map to FITS file: .//J1807-2506_X_map.fits
wmodel .//J1807-2506_X_map.mod
! Writing 167 model components to file: .//J1807-2506_X_map.mod
wobs   .//J1807-2506_X_uvs.fits
! Writing UV FITS file: .//J1807-2506_X_uvs.fits
wwins  .//J1807-2506_X_map.win
! wwins: Wrote 8 windows to .//J1807-2506_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.112646 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000154896 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.412521 0.412521 0.825041 1.65008 3.30016 6.60033 13.2007 26.4013 52.8026
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.112 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  727.236 
quit
! Quitting program
! Log file .//J1807-2506_X_dfm.log closed on Wed Nov 16 12:04:54 2016