! Started logfile: .//J1800+7828_X_dfm.log on Wed Nov 16 12:04:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1800+7828_X_uva.fits
! Reading UV FITS file: .//J1800+7828_X_uva.fits
! AN table 1: 30 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.673333 visibilities/baseline/integration-bin.
! Found source: J1800+7828
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 7272 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1800+7828_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.032945Jy  sigma=55.996227
! Fit after  self-cal, rms=0.837627Jy  sigma=23.458262
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7182 mas, bmaj=3.009 mas, bpa=41.31 degrees
! Estimated noise=0.563677 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.32348 Jy
! Component: 100  -  total flux cleaned = 1.63553 Jy
! Total flux subtracted in 100 components = 1.63553 Jy
! Clean residual min=-0.061346 max=0.129092 Jy/beam
! Clean residual mean=-0.000513 rms=0.018335 Jy/beam
! Combined flux in latest and established models = 1.63553 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.63553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.327655Jy  sigma=9.164275
! Fit after  self-cal, rms=0.326470Jy  sigma=9.134964
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.151677 Jy
! Component: 100  -  total flux cleaned = 0.242342 Jy
! Total flux subtracted in 100 components = 0.242342 Jy
! Clean residual min=-0.047260 max=0.056576 Jy/beam
! Clean residual mean=-0.000346 rms=0.010719 Jy/beam
! Combined flux in latest and established models = 1.87787 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 1.87787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.195015Jy  sigma=5.325692
! Fit after  self-cal, rms=0.191947Jy  sigma=5.266291
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9164 mas, bmaj=3.302 mas, bpa=39.98 degrees
! Estimated noise=0.309979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110237 Jy
! Component: 100  -  total flux cleaned = 0.174705 Jy
! Component: 150  -  total flux cleaned = 0.216041 Jy
! Component: 200  -  total flux cleaned = 0.243111 Jy
! Total flux subtracted in 200 components = 0.243111 Jy
! Clean residual min=-0.038529 max=0.045341 Jy/beam
! Clean residual mean=-0.000241 rms=0.008936 Jy/beam
! Combined flux in latest and established models = 2.12098 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 33 components and 2.12098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.109177Jy  sigma=2.942108
! Fit after  self-cal, rms=0.107448Jy  sigma=2.901724
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9164 x 3.302 at 39.98 degrees (North through East)
! Clean map  min=-0.034182  max=1.7573 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.98     KP        1.08     
!   LA        0.95     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.99     KP        1.07     
!   LA        0.96     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.98     KP        1.07     
!   LA        0.95     MK        1.00     NL        1.04     OV        1.01     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.99     KP        1.07     
!   LA        0.95     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.00     KP        1.07     
!   LA        0.96     MK        1.00     NL        1.03     OV        1.00     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.99     KP        1.08     
!   LA        0.96     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.99     KP        1.08     
!   LA        0.96     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        0.99     KP        1.07     
!   LA        0.95     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.95     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.107448Jy  sigma=2.901724
! Fit after  self-cal, rms=0.054339Jy  sigma=1.365196
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9174 mas, bmaj=3.29 mas, bpa=40.07 degrees
! Estimated noise=0.309028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.4, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145229 Jy
! Component: 100  -  total flux cleaned = 0.0203338 Jy
! Component: 150  -  total flux cleaned = 0.0236224 Jy
! Component: 200  -  total flux cleaned = 0.0254485 Jy
! Total flux subtracted in 200 components = 0.0254485 Jy
! Clean residual min=-0.009995 max=0.008765 Jy/beam
! Clean residual mean=0.000002 rms=0.002070 Jy/beam
! Combined flux in latest and established models = 2.14643 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 59 components and 2.14643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046695Jy  sigma=1.112804
! Fit after  self-cal, rms=0.046304Jy  sigma=1.102307
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046304Jy  sigma=1.102307
! Fit after  self-cal, rms=0.045915Jy  sigma=1.089809
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9171 mas, bmaj=3.29 mas, bpa=40.08 degrees
! Estimated noise=0.308612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.33486e-05 Jy
! Component: 100  -  total flux cleaned = 0.00156162 Jy
! Component: 150  -  total flux cleaned = 0.00278045 Jy
! Component: 200  -  total flux cleaned = 0.00352215 Jy
! Total flux subtracted in 200 components = 0.00352215 Jy
! Clean residual min=-0.008095 max=0.006946 Jy/beam
! Clean residual mean=0.000001 rms=0.001653 Jy/beam
! Combined flux in latest and established models = 2.14995 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 81 components and 2.14995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044094Jy  sigma=1.033900
! Fit after  self-cal, rms=0.043916Jy  sigma=1.030437
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109649 Jy
! Component: 100  -  total flux cleaned = 0.00212879 Jy
! Component: 150  -  total flux cleaned = 0.00305454 Jy
! Component: 200  -  total flux cleaned = 0.00389228 Jy
! Total flux subtracted in 200 components = 0.00389228 Jy
! Clean residual min=-0.007483 max=0.006581 Jy/beam
! Clean residual mean=0.000006 rms=0.001534 Jy/beam
! Combined flux in latest and established models = 2.15384 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 100 components and 2.15384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043247Jy  sigma=1.010925
! Fit after  self-cal, rms=0.043153Jy  sigma=1.009557
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043153Jy  sigma=1.009557
! Fit after  self-cal, rms=0.042937Jy  sigma=1.001492
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9167 mas, bmaj=3.289 mas, bpa=40.09 degrees
! Estimated noise=0.30858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000710679 Jy
! Component: 100  -  total flux cleaned = -0.00015385 Jy
! Component: 150  -  total flux cleaned = 0.000410666 Jy
! Component: 200  -  total flux cleaned = 0.00107947 Jy
! Total flux subtracted in 200 components = 0.00107947 Jy
! Clean residual min=-0.006265 max=0.005918 Jy/beam
! Clean residual mean=0.000004 rms=0.001370 Jy/beam
! Combined flux in latest and established models = 2.15492 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 114 components and 2.15492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042325Jy  sigma=0.984724
! Fit after  self-cal, rms=0.042241Jy  sigma=0.983462
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000693996 Jy
! Component: 100  -  total flux cleaned = 0.00138986 Jy
! Component: 150  -  total flux cleaned = 0.00174833 Jy
! Component: 200  -  total flux cleaned = 0.00208873 Jy
! Total flux subtracted in 200 components = 0.00208873 Jy
! Clean residual min=-0.005979 max=0.005728 Jy/beam
! Clean residual mean=0.000006 rms=0.001327 Jy/beam
! Combined flux in latest and established models = 2.15701 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 2.15701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041977Jy  sigma=0.976270
! Fit after  self-cal, rms=0.041943Jy  sigma=0.975875
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041943Jy  sigma=0.975875
! Fit after  self-cal, rms=0.041857Jy  sigma=0.972290
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=4.628 mas, bpa=32.22 degrees
! Estimated noise=0.376103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000481006 Jy
! Component: 100  -  total flux cleaned = 0.00134192 Jy
! Component: 150  -  total flux cleaned = 0.0015883 Jy
! Component: 200  -  total flux cleaned = 0.00169949 Jy
! Total flux subtracted in 200 components = 0.00169949 Jy
! Clean residual min=-0.006667 max=0.006200 Jy/beam
! Clean residual mean=0.000016 rms=0.001882 Jy/beam
! Combined flux in latest and established models = 2.15871 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 142 components and 2.15871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041829Jy  sigma=0.970618
! Fit after  self-cal, rms=0.041813Jy  sigma=0.970084
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472329 Jy
! Component: 100  -  total flux cleaned = 0.000577586 Jy
! Component: 150  -  total flux cleaned = 0.000670172 Jy
! Component: 200  -  total flux cleaned = 0.000670446 Jy
! Total flux subtracted in 200 components = 0.000670446 Jy
! Clean residual min=-0.006668 max=0.005961 Jy/beam
! Clean residual mean=0.000018 rms=0.001862 Jy/beam
! Combined flux in latest and established models = 2.15938 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 148 components and 2.15938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041791Jy  sigma=0.969745
! Fit after  self-cal, rms=0.041783Jy  sigma=0.969472
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=3.289 mas, bpa=40.1 degrees
! Estimated noise=0.308639 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9165 x 3.289 at 40.1 degrees (North through East)
! Clean map  min=-0.0068893  max=1.7452 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041783Jy  sigma=0.969472
! Fit after  self-cal, rms=0.032169Jy  sigma=0.777722
! Inverting map and beam 
! Estimated beam: bmin=0.9166 mas, bmaj=3.289 mas, bpa=40.1 degrees
! Estimated noise=0.308742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000324364 Jy
! Component: 100  -  total flux cleaned = -0.000159512 Jy
! Component: 150  -  total flux cleaned = -7.99855e-05 Jy
! Component: 200  -  total flux cleaned = 0.000183294 Jy
! Total flux subtracted in 200 components = 0.000183294 Jy
! Clean residual min=-0.004575 max=0.004911 Jy/beam
! Clean residual mean=0.000006 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 2.15957 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 161 components and 2.15956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031735Jy  sigma=0.767432
! Fit after  self-cal, rms=0.031702Jy  sigma=0.767065
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136914 Jy
! Component: 100  -  total flux cleaned = 0.000257084 Jy
! Component: 150  -  total flux cleaned = 0.000311868 Jy
! Component: 200  -  total flux cleaned = 0.000366168 Jy
! Total flux subtracted in 200 components = 0.000366168 Jy
! Clean residual min=-0.004459 max=0.004898 Jy/beam
! Clean residual mean=0.000007 rms=0.001176 Jy/beam
! Combined flux in latest and established models = 2.15993 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 169 components and 2.15993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031485Jy  sigma=0.762044
! Fit after  self-cal, rms=0.031472Jy  sigma=0.761884
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031472Jy  sigma=0.761884
! Fit after  self-cal, rms=0.031433Jy  sigma=0.760048
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7192 mas, bmaj=3 mas, bpa=41.39 degrees
! Estimated noise=0.561943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.31905 Jy
! Component: 100  -  total flux cleaned = 1.63543 Jy
! Component: 150  -  total flux cleaned = 1.78623 Jy
! Component: 200  -  total flux cleaned = 1.87777 Jy
! Total flux subtracted in 200 components = 1.87777 Jy
! Clean residual min=-0.026700 max=0.049701 Jy/beam
! Clean residual mean=-0.000218 rms=0.007640 Jy/beam
! Combined flux in latest and established models = 1.87777 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.87777 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9163 mas, bmaj=3.289 mas, bpa=40.1 degrees
! Estimated noise=0.308705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0955013 Jy
! Component: 100  -  total flux cleaned = 0.14528 Jy
! Component: 150  -  total flux cleaned = 0.175999 Jy
! Component: 200  -  total flux cleaned = 0.198448 Jy
! Total flux subtracted in 200 components = 0.198448 Jy
! Clean residual min=-0.008865 max=0.021349 Jy/beam
! Clean residual mean=-0.000098 rms=0.003459 Jy/beam
! Combined flux in latest and established models = 2.07622 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 40 components and 2.07622 Jy
! Inverting map 
! Added new window around map position (-3, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198842 Jy
! Component: 100  -  total flux cleaned = 0.0332964 Jy
! Component: 150  -  total flux cleaned = 0.0437375 Jy
! Component: 200  -  total flux cleaned = 0.0519278 Jy
! Total flux subtracted in 200 components = 0.0519278 Jy
! Clean residual min=-0.005554 max=0.006440 Jy/beam
! Clean residual mean=-0.000033 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 2.12815 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 69 components and 2.12815 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.087 mas, bmaj=4.628 mas, bpa=32.24 degrees
! Estimated noise=0.376191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103263 Jy
! Component: 100  -  total flux cleaned = 0.0169709 Jy
! Component: 150  -  total flux cleaned = 0.0214392 Jy
! Component: 200  -  total flux cleaned = 0.0245902 Jy
! Total flux subtracted in 200 components = 0.0245902 Jy
! Clean residual min=-0.006532 max=0.005604 Jy/beam
! Clean residual mean=-0.000001 rms=0.001817 Jy/beam
! Combined flux in latest and established models = 2.15274 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134397 Jy
! Component: 100  -  total flux cleaned = 0.0022986 Jy
! Component: 150  -  total flux cleaned = 0.00296049 Jy
! Component: 200  -  total flux cleaned = 0.00353433 Jy
! Total flux subtracted in 200 components = 0.00353433 Jy
! Clean residual min=-0.005684 max=0.005462 Jy/beam
! Clean residual mean=0.000011 rms=0.001722 Jy/beam
! Combined flux in latest and established models = 2.15627 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 137 components and 2.15627 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9163 mas, bmaj=3.289 mas, bpa=40.1 degrees
! Estimated noise=0.308705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000536237 Jy
! Component: 100  -  total flux cleaned = 5.69483e-06 Jy
! Component: 150  -  total flux cleaned = 0.000195917 Jy
! Component: 200  -  total flux cleaned = 0.000368193 Jy
! Total flux subtracted in 200 components = 0.000368193 Jy
! Clean residual min=-0.004129 max=0.004137 Jy/beam
! Clean residual mean=0.000006 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 2.15664 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 163 components and 2.15664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030764Jy  sigma=0.743508
! Fit after  self-cal, rms=0.030480Jy  sigma=0.736730
wmodel /J1800+7828_X_map.mod
! wmodel: Unable to open new model file: /J1800+7828_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1800+7828_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9163 x 3.289 at 40.1 degrees (North through East)
! Clean map  min=-0.0039877  max=1.7517 Jy/beam
! Writing clean map to FITS file: .//J1800+7828_X_map.fits
wmodel .//J1800+7828_X_map.mod
! Writing 163 model components to file: .//J1800+7828_X_map.mod
wobs   .//J1800+7828_X_uvs.fits
! Writing UV FITS file: .//J1800+7828_X_uvs.fits
wwins  .//J1800+7828_X_map.win
! wwins: Wrote 3 windows to .//J1800+7828_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.75172 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00105308 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.18035 0.18035 0.3607 0.7214 1.4428 2.8856 5.7712 11.5424 23.0848 46.1696 92.3392
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0031 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.751 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1663.43 
quit
! Quitting program
! Log file .//J1800+7828_X_dfm.log closed on Wed Nov 16 12:04:34 2016