! Started logfile: .//J1745+1720_X_dfm.log on Wed Nov 16 12:03:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1745+1720_X_uvm.fits
! Reading UV FITS file: .//J1745+1720_X_uvm.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.70037 visibilities/baseline/integration-bin.
! Found source: J1745+1720
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 15128 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1745+1720_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 145 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.117395Jy  sigma=37.420913
! Fit after  self-cal, rms=0.490896Jy  sigma=16.882926
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7562 mas, bmaj=2.06 mas, bpa=-2.593 degrees
! Estimated noise=0.301372 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.399964 Jy
! Component: 100  -  total flux cleaned = 0.487182 Jy
! Total flux subtracted in 100 components = 0.487182 Jy
! Clean residual min=-0.019161 max=0.040021 Jy/beam
! Clean residual mean=0.000008 rms=0.004874 Jy/beam
! Combined flux in latest and established models = 0.487182 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.487182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080252Jy  sigma=2.558306
! Fit after  self-cal, rms=0.080251Jy  sigma=2.558251
! Inverting map 
! Added new window around map position (0.8, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0308519 Jy
! Component: 100  -  total flux cleaned = 0.030243 Jy
! Total flux subtracted in 100 components = 0.030243 Jy
! Clean residual min=-0.014034 max=0.022980 Jy/beam
! Clean residual mean=0.000005 rms=0.003463 Jy/beam
! Combined flux in latest and established models = 0.517425 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.517425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067436Jy  sigma=2.162777
! Fit after  self-cal, rms=0.066121Jy  sigma=2.116552
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.881 mas, bmaj=2.263 mas, bpa=-2.574 degrees
! Estimated noise=0.172982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169828 Jy
! Component: 100  -  total flux cleaned = 0.0219259 Jy
! Component: 150  -  total flux cleaned = 0.0231108 Jy
! Component: 200  -  total flux cleaned = 0.0241191 Jy
! Total flux subtracted in 200 components = 0.0241191 Jy
! Clean residual min=-0.008551 max=0.011856 Jy/beam
! Clean residual mean=0.000002 rms=0.002143 Jy/beam
! Combined flux in latest and established models = 0.541544 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.541544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060667Jy  sigma=1.944929
! Fit after  self-cal, rms=0.060314Jy  sigma=1.934858
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.881 x 2.263 at -2.574 degrees (North through East)
! Clean map  min=-0.0083072  max=0.49636 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.94     KP        1.06     
!   LA        1.00     MK        0.94     NL        1.02     OV        1.00     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.94     KP        1.05     
!   LA        1.01     MK        0.94     NL        1.02     OV        1.00     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.92     KP        1.05     
!   LA        1.00     MK        0.96     NL        1.00     OV        1.00     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.94     KP        1.04     
!   LA        1.00     MK        0.98     NL        1.01     OV        1.00     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.94     KP        1.03     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        0.93     KP        1.03     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.96     KP        1.03     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        0.96     KP        1.04     
!   LA        1.00     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.060314Jy  sigma=1.934858
! Fit after  self-cal, rms=0.053035Jy  sigma=1.749153
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8665 mas, bmaj=2.274 mas, bpa=-2.798 degrees
! Estimated noise=0.173216 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00653617 Jy
! Component: 100  -  total flux cleaned = 0.00783018 Jy
! Component: 150  -  total flux cleaned = 0.00907553 Jy
! Component: 200  -  total flux cleaned = 0.00994048 Jy
! Total flux subtracted in 200 components = 0.00994048 Jy
! Clean residual min=-0.004436 max=0.003817 Jy/beam
! Clean residual mean=-0.000000 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.551485 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 45 components and 0.551485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051970Jy  sigma=1.712834
! Fit after  self-cal, rms=0.051952Jy  sigma=1.712131
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051952Jy  sigma=1.712131
! Fit after  self-cal, rms=0.022885Jy  sigma=0.751499
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8658 mas, bmaj=2.273 mas, bpa=-2.797 degrees
! Estimated noise=0.172805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000388837 Jy
! Component: 100  -  total flux cleaned = 0.000418955 Jy
! Component: 150  -  total flux cleaned = 0.000969419 Jy
! Component: 200  -  total flux cleaned = 0.00140288 Jy
! Total flux subtracted in 200 components = 0.00140288 Jy
! Clean residual min=-0.003788 max=0.003366 Jy/beam
! Clean residual mean=-0.000000 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.552888 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 57 components and 0.552888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022275Jy  sigma=0.729921
! Fit after  self-cal, rms=0.022261Jy  sigma=0.728937
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000219816 Jy
! Component: 100  -  total flux cleaned = 0.00060515 Jy
! Component: 150  -  total flux cleaned = 0.000904869 Jy
! Component: 200  -  total flux cleaned = 0.00118591 Jy
! Total flux subtracted in 200 components = 0.00118591 Jy
! Clean residual min=-0.003504 max=0.003031 Jy/beam
! Clean residual mean=-0.000000 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.554073 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 66 components and 0.554074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021944Jy  sigma=0.717912
! Fit after  self-cal, rms=0.021941Jy  sigma=0.717503
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021941Jy  sigma=0.717503
! Fit after  self-cal, rms=0.021854Jy  sigma=0.715293
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8648 mas, bmaj=2.273 mas, bpa=-2.806 degrees
! Estimated noise=0.17264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00104269 Jy
! Component: 100  -  total flux cleaned = -0.000479766 Jy
! Component: 150  -  total flux cleaned = 7.53477e-05 Jy
! Component: 200  -  total flux cleaned = 0.000442267 Jy
! Total flux subtracted in 200 components = 0.000442267 Jy
! Clean residual min=-0.003094 max=0.002851 Jy/beam
! Clean residual mean=-0.000000 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.554516 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 73 components and 0.554516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021592Jy  sigma=0.706083
! Fit after  self-cal, rms=0.021585Jy  sigma=0.705516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.79583e-05 Jy
! Component: 100  -  total flux cleaned = 0.000389659 Jy
! Component: 150  -  total flux cleaned = 0.000510949 Jy
! Component: 200  -  total flux cleaned = 0.000665747 Jy
! Total flux subtracted in 200 components = 0.000665747 Jy
! Clean residual min=-0.002892 max=0.002603 Jy/beam
! Clean residual mean=-0.000000 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.555181 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 81 components and 0.555182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021436Jy  sigma=0.700461
! Fit after  self-cal, rms=0.021435Jy  sigma=0.700238
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021435Jy  sigma=0.700238
! Fit after  self-cal, rms=0.021377Jy  sigma=0.698987
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.008 mas, bmaj=3.05 mas, bpa=-3.18 degrees
! Estimated noise=0.227643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000826835 Jy
! Component: 100  -  total flux cleaned = 0.00122238 Jy
! Component: 150  -  total flux cleaned = 0.00169837 Jy
! Component: 200  -  total flux cleaned = 0.00203261 Jy
! Total flux subtracted in 200 components = 0.00203261 Jy
! Clean residual min=-0.003122 max=0.003140 Jy/beam
! Clean residual mean=-0.000000 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.557214 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.557214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021354Jy  sigma=0.698106
! Fit after  self-cal, rms=0.021352Jy  sigma=0.697849
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000430127 Jy
! Component: 100  -  total flux cleaned = 0.000576607 Jy
! Component: 150  -  total flux cleaned = 0.000680387 Jy
! Component: 200  -  total flux cleaned = 0.000842699 Jy
! Total flux subtracted in 200 components = 0.000842699 Jy
! Clean residual min=-0.002879 max=0.002884 Jy/beam
! Clean residual mean=-0.000000 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.558057 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 107 components and 0.558057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021343Jy  sigma=0.697547
! Fit after  self-cal, rms=0.021342Jy  sigma=0.697416
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8642 mas, bmaj=2.273 mas, bpa=-2.813 degrees
! Estimated noise=0.172506 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8642 x 2.273 at -2.813 degrees (North through East)
! Clean map  min=-0.0028432  max=0.49472 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7438 mas, bmaj=2.053 mas, bpa=-2.688 degrees
! Estimated noise=0.297996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.394724 Jy
! Component: 100  -  total flux cleaned = 0.481866 Jy
! Component: 150  -  total flux cleaned = 0.510401 Jy
! Component: 200  -  total flux cleaned = 0.524177 Jy
! Total flux subtracted in 200 components = 0.524177 Jy
! Clean residual min=-0.007481 max=0.008442 Jy/beam
! Clean residual mean=0.000001 rms=0.001449 Jy/beam
! Combined flux in latest and established models = 0.524177 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.524177 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8642 mas, bmaj=2.273 mas, bpa=-2.813 degrees
! Estimated noise=0.172506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00963142 Jy
! Component: 100  -  total flux cleaned = 0.0137552 Jy
! Component: 150  -  total flux cleaned = 0.017057 Jy
! Component: 200  -  total flux cleaned = 0.0195649 Jy
! Total flux subtracted in 200 components = 0.0195649 Jy
! Clean residual min=-0.004381 max=0.004066 Jy/beam
! Clean residual mean=0.000000 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.543742 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 30 components and 0.543742 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.008 mas, bmaj=3.05 mas, bpa=-3.18 degrees
! Estimated noise=0.227643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00556106 Jy
! Component: 100  -  total flux cleaned = 0.00831621 Jy
! Component: 150  -  total flux cleaned = 0.0096985 Jy
! Component: 200  -  total flux cleaned = 0.0106008 Jy
! Total flux subtracted in 200 components = 0.0106008 Jy
! Clean residual min=-0.003885 max=0.003898 Jy/beam
! Clean residual mean=0.000000 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 0.554343 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000795912 Jy
! Component: 100  -  total flux cleaned = 0.00127694 Jy
! Component: 150  -  total flux cleaned = 0.00178157 Jy
! Component: 200  -  total flux cleaned = 0.00217192 Jy
! Total flux subtracted in 200 components = 0.00217192 Jy
! Clean residual min=-0.003219 max=0.003323 Jy/beam
! Clean residual mean=0.000000 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.556515 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 77 components and 0.556515 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8642 mas, bmaj=2.273 mas, bpa=-2.813 degrees
! Estimated noise=0.172506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00045471 Jy
! Component: 100  -  total flux cleaned = -0.000235707 Jy
! Component: 150  -  total flux cleaned = -0.000222972 Jy
! Component: 200  -  total flux cleaned = -0.000143236 Jy
! Total flux subtracted in 200 components = -0.000143236 Jy
! Clean residual min=-0.002813 max=0.002594 Jy/beam
! Clean residual mean=0.000000 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.556372 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.556371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021767Jy  sigma=0.712485
! Fit after  self-cal, rms=0.021741Jy  sigma=0.711232
wmodel /J1745+1720_X_map.mod
! wmodel: Unable to open new model file: /J1745+1720_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1745+1720_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8642 x 2.273 at -2.813 degrees (North through East)
! Clean map  min=-0.003437  max=0.49331 Jy/beam
! Writing clean map to FITS file: .//J1745+1720_X_map.fits
wmodel .//J1745+1720_X_map.mod
! Writing 97 model components to file: .//J1745+1720_X_map.mod
wobs   .//J1745+1720_X_uvs.fits
! Writing UV FITS file: .//J1745+1720_X_uvs.fits
wwins  .//J1745+1720_X_map.win
! wwins: Wrote 5 windows to .//J1745+1720_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.493306 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000588392 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.357826 0.357826 0.715652 1.4313 2.86261 5.72522 11.4504 22.9009 45.8017 91.6035
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.493 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  838.396 
quit
! Quitting program
! Log file .//J1745+1720_X_dfm.log closed on Wed Nov 16 12:03:58 2016