! Started logfile: .//J1737+0621_X_dfm.log on Wed Nov 16 12:03:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1737+0621_X_uva.fits
! Reading UV FITS file: .//J1737+0621_X_uva.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.92381 visibilities/baseline/integration-bin.
! Found source: J1737+0621
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 6984 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1737+0621_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036723Jy  sigma=33.506669
! Fit after  self-cal, rms=0.718246Jy  sigma=23.154386
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7549 mas, bmaj=1.983 mas, bpa=-2.524 degrees
! Estimated noise=0.389012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207781 Jy
! Component: 100  -  total flux cleaned = 0.27637 Jy
! Total flux subtracted in 100 components = 0.27637 Jy
! Clean residual min=-0.016165 max=0.032288 Jy/beam
! Clean residual mean=0.000011 rms=0.005033 Jy/beam
! Combined flux in latest and established models = 0.27637 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.27637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086179Jy  sigma=2.699563
! Fit after  self-cal, rms=0.086089Jy  sigma=2.695514
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0361455 Jy
! Component: 100  -  total flux cleaned = 0.0555729 Jy
! Total flux subtracted in 100 components = 0.0555729 Jy
! Clean residual min=-0.011245 max=0.024235 Jy/beam
! Clean residual mean=0.000005 rms=0.003520 Jy/beam
! Combined flux in latest and established models = 0.331942 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.331942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064912Jy  sigma=1.976676
! Fit after  self-cal, rms=0.064919Jy  sigma=1.975113
! Inverting map 
! Added new window around map position (3.2, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210799 Jy
! Component: 100  -  total flux cleaned = 0.0334711 Jy
! Total flux subtracted in 100 components = 0.0334711 Jy
! Clean residual min=-0.008302 max=0.019935 Jy/beam
! Clean residual mean=0.000002 rms=0.002760 Jy/beam
! Combined flux in latest and established models = 0.365414 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.365414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054131Jy  sigma=1.623731
! Fit after  self-cal, rms=0.053663Jy  sigma=1.615726
! Inverting map 
! Added new window around map position (4.8, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178747 Jy
! Component: 100  -  total flux cleaned = 0.0283152 Jy
! Total flux subtracted in 100 components = 0.0283152 Jy
! Clean residual min=-0.007240 max=0.011042 Jy/beam
! Clean residual mean=0.000002 rms=0.002059 Jy/beam
! Combined flux in latest and established models = 0.393729 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.393729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043915Jy  sigma=1.298934
! Fit after  self-cal, rms=0.042964Jy  sigma=1.280359
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.892 mas, bmaj=2.237 mas, bpa=-1.375 degrees
! Estimated noise=0.265427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147883 Jy
! Component: 100  -  total flux cleaned = 0.0253738 Jy
! Component: 150  -  total flux cleaned = 0.0338243 Jy
! Component: 200  -  total flux cleaned = 0.0408504 Jy
! Total flux subtracted in 200 components = 0.0408504 Jy
! Clean residual min=-0.006909 max=0.010423 Jy/beam
! Clean residual mean=-0.000009 rms=0.002245 Jy/beam
! Combined flux in latest and established models = 0.434579 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 85 components and 0.434579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034445Jy  sigma=1.034758
! Fit after  self-cal, rms=0.033710Jy  sigma=1.015911
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.892 x 2.237 at -1.375 degrees (North through East)
! Clean map  min=-0.0058069  max=0.28584 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.05     KP        1.02     
!   LA        0.94     MK        0.97     NL        1.04     OV        0.99     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.03     KP        1.02     
!   LA        0.94     MK        0.98     NL        1.06     OV        0.99     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.05     KP        1.01     
!   LA        0.94     MK        0.97     NL        1.05     OV        0.99     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.04     KP        1.01     
!   LA        0.94     MK        0.98     NL        1.06     OV        1.00     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.02     KP        1.01     
!   LA        0.96     MK        0.99     NL        1.05     OV        1.01     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.04     KP        1.02     
!   LA        0.95     MK        1.01     NL        1.04     OV        1.00     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.06     KP        1.03     
!   LA        0.95     MK        1.02     NL        1.05     OV        1.03     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.05     KP        1.04     
!   LA        0.96     MK        0.99     NL        1.06     OV        1.00     
!   PT        0.94     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.033710Jy  sigma=1.015911
! Fit after  self-cal, rms=0.026221Jy  sigma=0.817131
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8954 mas, bmaj=2.256 mas, bpa=-1.273 degrees
! Estimated noise=0.261751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00724743 Jy
! Component: 100  -  total flux cleaned = 0.00952278 Jy
! Component: 150  -  total flux cleaned = 0.0105293 Jy
! Component: 200  -  total flux cleaned = 0.0110643 Jy
! Total flux subtracted in 200 components = 0.0110643 Jy
! Clean residual min=-0.002429 max=0.005594 Jy/beam
! Clean residual mean=-0.000002 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.445643 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 111 components and 0.445643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024043Jy  sigma=0.748018
! Fit after  self-cal, rms=0.023628Jy  sigma=0.736951
! Inverting map 
! Added new window around map position (6.2, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00447626 Jy
! Component: 100  -  total flux cleaned = 0.00676916 Jy
! Component: 150  -  total flux cleaned = 0.00828309 Jy
! Component: 200  -  total flux cleaned = 0.00888528 Jy
! Total flux subtracted in 200 components = 0.00888528 Jy
! Clean residual min=-0.001972 max=0.002291 Jy/beam
! Clean residual mean=-0.000001 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.454529 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 138 components and 0.454529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022657Jy  sigma=0.706475
! Fit after  self-cal, rms=0.022628Jy  sigma=0.705809
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022628Jy  sigma=0.705809
! Fit after  self-cal, rms=0.022530Jy  sigma=0.701688
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8965 mas, bmaj=2.258 mas, bpa=-1.254 degrees
! Estimated noise=0.262082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113404 Jy
! Component: 100  -  total flux cleaned = 0.001085 Jy
! Component: 150  -  total flux cleaned = 0.0011243 Jy
! Component: 200  -  total flux cleaned = 0.00108745 Jy
! Total flux subtracted in 200 components = 0.00108745 Jy
! Clean residual min=-0.001709 max=0.002009 Jy/beam
! Clean residual mean=-0.000002 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.455616 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 147 components and 0.455616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022326Jy  sigma=0.695665
! Fit after  self-cal, rms=0.022303Jy  sigma=0.695050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.8, 16.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119917 Jy
! Component: 100  -  total flux cleaned = 0.00160448 Jy
! Component: 150  -  total flux cleaned = 0.00176168 Jy
! Component: 200  -  total flux cleaned = 0.00181757 Jy
! Total flux subtracted in 200 components = 0.00181757 Jy
! Clean residual min=-0.001562 max=0.001762 Jy/beam
! Clean residual mean=-0.000002 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.457433 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 158 components and 0.457434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022132Jy  sigma=0.689906
! Fit after  self-cal, rms=0.022122Jy  sigma=0.689672
! Inverting map 
! Added new window around map position (25.2, 23.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146433 Jy
! Component: 100  -  total flux cleaned = 0.00209983 Jy
! Component: 150  -  total flux cleaned = 0.00230003 Jy
! Component: 200  -  total flux cleaned = 0.00247704 Jy
! Total flux subtracted in 200 components = 0.00247704 Jy
! Clean residual min=-0.001368 max=0.001399 Jy/beam
! Clean residual mean=-0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.459911 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 178 components and 0.459911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022006Jy  sigma=0.685570
! Fit after  self-cal, rms=0.022002Jy  sigma=0.685413
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022002Jy  sigma=0.685413
! Fit after  self-cal, rms=0.021989Jy  sigma=0.684667
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8967 mas, bmaj=2.259 mas, bpa=-1.27 degrees
! Estimated noise=0.262264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00020832 Jy
! Component: 100  -  total flux cleaned = 0.000232842 Jy
! Component: 150  -  total flux cleaned = 0.000300577 Jy
! Component: 200  -  total flux cleaned = 0.00038345 Jy
! Total flux subtracted in 200 components = 0.00038345 Jy
! Clean residual min=-0.001321 max=0.001357 Jy/beam
! Clean residual mean=-0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.460294 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 192 components and 0.460294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021940Jy  sigma=0.683138
! Fit after  self-cal, rms=0.021939Jy  sigma=0.683100
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.13182e-05 Jy
! Component: 100  -  total flux cleaned = 7.94233e-05 Jy
! Component: 150  -  total flux cleaned = 0.000151967 Jy
! Component: 200  -  total flux cleaned = 0.000186548 Jy
! Total flux subtracted in 200 components = 0.000186548 Jy
! Clean residual min=-0.001291 max=0.001337 Jy/beam
! Clean residual mean=-0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.460481 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 198 components and 0.460481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021911Jy  sigma=0.682203
! Fit after  self-cal, rms=0.021911Jy  sigma=0.682181
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021911Jy  sigma=0.682181
! Fit after  self-cal, rms=0.021916Jy  sigma=0.682066
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.073 mas, bmaj=3.328 mas, bpa=-2.445 degrees
! Estimated noise=0.336307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000896563 Jy
! Component: 100  -  total flux cleaned = 0.00131167 Jy
! Component: 150  -  total flux cleaned = 0.0014891 Jy
! Component: 200  -  total flux cleaned = 0.00160897 Jy
! Total flux subtracted in 200 components = 0.00160897 Jy
! Clean residual min=-0.001873 max=0.001297 Jy/beam
! Clean residual mean=-0.000003 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.46209 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 213 components and 0.46209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021909Jy  sigma=0.681742
! Fit after  self-cal, rms=0.021905Jy  sigma=0.681631
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.28752e-05 Jy
! Component: 100  -  total flux cleaned = 0.000157338 Jy
! Component: 150  -  total flux cleaned = 0.000276331 Jy
! Component: 200  -  total flux cleaned = 0.000402184 Jy
! Total flux subtracted in 200 components = 0.000402184 Jy
! Clean residual min=-0.001802 max=0.001244 Jy/beam
! Clean residual mean=-0.000003 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.462492 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 230 components and 0.462492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021903Jy  sigma=0.681540
! Fit after  self-cal, rms=0.021899Jy  sigma=0.681411
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=2.259 mas, bpa=-1.274 degrees
! Estimated noise=0.2624 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8969 x 2.259 at -1.274 degrees (North through East)
! Clean map  min=-0.001268  max=0.28159 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7586 mas, bmaj=1.995 mas, bpa=-2.405 degrees
! Estimated noise=0.38589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.205759 Jy
! Component: 100  -  total flux cleaned = 0.272889 Jy
! Component: 150  -  total flux cleaned = 0.310732 Jy
! Component: 200  -  total flux cleaned = 0.337277 Jy
! Total flux subtracted in 200 components = 0.337277 Jy
! Clean residual min=-0.008767 max=0.015366 Jy/beam
! Clean residual mean=0.000005 rms=0.002948 Jy/beam
! Combined flux in latest and established models = 0.337277 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.337277 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=2.259 mas, bpa=-1.274 degrees
! Estimated noise=0.2624 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286568 Jy
! Component: 100  -  total flux cleaned = 0.0488818 Jy
! Component: 150  -  total flux cleaned = 0.0634878 Jy
! Component: 200  -  total flux cleaned = 0.0742038 Jy
! Total flux subtracted in 200 components = 0.0742038 Jy
! Clean residual min=-0.004080 max=0.006876 Jy/beam
! Clean residual mean=-0.000004 rms=0.001622 Jy/beam
! Combined flux in latest and established models = 0.411481 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 50 components and 0.411481 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.073 mas, bmaj=3.328 mas, bpa=-2.445 degrees
! Estimated noise=0.336307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144861 Jy
! Component: 100  -  total flux cleaned = 0.0235819 Jy
! Component: 150  -  total flux cleaned = 0.0298258 Jy
! Component: 200  -  total flux cleaned = 0.0342497 Jy
! Total flux subtracted in 200 components = 0.0342497 Jy
! Clean residual min=-0.002649 max=0.003479 Jy/beam
! Clean residual mean=-0.000005 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.44573 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325264 Jy
! Component: 100  -  total flux cleaned = 0.00573582 Jy
! Component: 150  -  total flux cleaned = 0.00769748 Jy
! Component: 200  -  total flux cleaned = 0.00933151 Jy
! Total flux subtracted in 200 components = 0.00933151 Jy
! Clean residual min=-0.001749 max=0.001794 Jy/beam
! Clean residual mean=-0.000003 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.455062 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 123 components and 0.455062 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=2.259 mas, bpa=-1.274 degrees
! Estimated noise=0.2624 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188107 Jy
! Component: 100  -  total flux cleaned = 0.00240603 Jy
! Component: 150  -  total flux cleaned = 0.0028447 Jy
! Component: 200  -  total flux cleaned = 0.0032289 Jy
! Total flux subtracted in 200 components = 0.0032289 Jy
! Clean residual min=-0.001702 max=0.001905 Jy/beam
! Clean residual mean=-0.000001 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.458291 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 141 components and 0.458291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022340Jy  sigma=0.694830
! Fit after  self-cal, rms=0.022286Jy  sigma=0.693153
wmodel /J1737+0621_X_map.mod
! wmodel: Unable to open new model file: /J1737+0621_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1737+0621_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8969 x 2.259 at -1.274 degrees (North through East)
! Clean map  min=-0.0013499  max=0.28208 Jy/beam
! Writing clean map to FITS file: .//J1737+0621_X_map.fits
wmodel .//J1737+0621_X_map.mod
! Writing 141 model components to file: .//J1737+0621_X_map.mod
wobs   .//J1737+0621_X_uvs.fits
! Writing UV FITS file: .//J1737+0621_X_uvs.fits
wwins  .//J1737+0621_X_map.win
! wwins: Wrote 6 windows to .//J1737+0621_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.282083 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000397535 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.422786 0.422786 0.845571 1.69114 3.38229 6.76457 13.5291 27.0583 54.1166
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.282 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  709.579 
quit
! Quitting program
! Log file .//J1737+0621_X_dfm.log closed on Wed Nov 16 12:03:39 2016