! Started logfile: .//J1730-0515_X_dfm.log on Wed Nov 16 12:03:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1730-0515_X_uvm.fits
! Reading UV FITS file: .//J1730-0515_X_uvm.fits
! AN table 1: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.831276 visibilities/baseline/integration-bin.
! Found source: J1730-0515
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 16160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1730-0515_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000738Jy  sigma=31.935409
! Fit after  self-cal, rms=0.957262Jy  sigma=30.450891
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7476 mas, bmaj=1.926 mas, bpa=-6.525 degrees
! Estimated noise=0.36578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0289078 Jy
! Component: 100  -  total flux cleaned = 0.0422543 Jy
! Total flux subtracted in 100 components = 0.0422543 Jy
! Clean residual min=-0.005694 max=0.009197 Jy/beam
! Clean residual mean=-0.000014 rms=0.001575 Jy/beam
! Combined flux in latest and established models = 0.0422543 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0422543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041504Jy  sigma=1.246479
! Fit after  self-cal, rms=0.040714Jy  sigma=1.225480
! Inverting map 
! Added new window around map position (1.4, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00998928 Jy
! Component: 100  -  total flux cleaned = 0.0157962 Jy
! Total flux subtracted in 100 components = 0.0157962 Jy
! Clean residual min=-0.005089 max=0.008167 Jy/beam
! Clean residual mean=-0.000012 rms=0.001383 Jy/beam
! Combined flux in latest and established models = 0.0580505 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 26 components and 0.0580505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036769Jy  sigma=1.070912
! Fit after  self-cal, rms=0.036095Jy  sigma=1.050635
! Inverting map 
! Added new window around map position (-7.2, 7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100375 Jy
! Component: 100  -  total flux cleaned = 0.0154605 Jy
! Total flux subtracted in 100 components = 0.0154605 Jy
! Clean residual min=-0.004869 max=0.006950 Jy/beam
! Clean residual mean=-0.000008 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.073511 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.073511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032671Jy  sigma=0.918993
! Fit after  self-cal, rms=0.031663Jy  sigma=0.888152
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00734548 Jy
! Component: 100  -  total flux cleaned = 0.0119384 Jy
! Total flux subtracted in 100 components = 0.0119384 Jy
! Clean residual min=-0.004287 max=0.005046 Jy/beam
! Clean residual mean=-0.000005 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.0854494 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 0.0854494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029389Jy  sigma=0.799326
! Fit after  self-cal, rms=0.029070Jy  sigma=0.788568
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9961 mas, bmaj=2.463 mas, bpa=-7.081 degrees
! Estimated noise=0.178255 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00642359 Jy
! Component: 100  -  total flux cleaned = 0.0105613 Jy
! Component: 150  -  total flux cleaned = 0.013273 Jy
! Component: 200  -  total flux cleaned = 0.0141986 Jy
! Total flux subtracted in 200 components = 0.0141986 Jy
! Clean residual min=-0.002590 max=0.004123 Jy/beam
! Clean residual mean=-0.000008 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.0996481 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 67 components and 0.0996481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027394Jy  sigma=0.722734
! Fit after  self-cal, rms=0.027204Jy  sigma=0.715755
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9961 x 2.463 at -7.081 degrees (North through East)
! Clean map  min=-0.0025565  max=0.03565 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.14     KP        0.96     
!   LA        0.96     MK        0.90     NL        1.04     OV        0.96     
!   PT        0.94     SC        1.12     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        1.11     KP        0.99     
!   LA        0.96     MK        0.88     NL        1.03     OV        0.98     
!   PT        0.91     SC        1.10     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.10     KP        0.97     
!   LA        0.94     MK        0.93     NL        1.05     OV        0.97     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.16     KP        0.97     
!   LA        0.94     MK        0.89     NL        1.05     OV        0.99     
!   PT        0.93     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.98     HN        1.18     KP        0.99     
!   LA        0.98     MK        0.89     NL        1.01     OV        1.02     
!   PT        0.95     SC        1.09     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.00     HN        1.08     KP        0.97     
!   LA        0.95     MK        0.89     NL        1.05     OV        1.00     
!   PT        0.96     SC        1.10     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        1.08     KP        0.97     
!   LA        0.98     MK        0.93     NL        1.03     OV        1.00     
!   PT        0.96     SC        1.09     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        1.16     KP        0.99     
!   LA        0.96     MK        0.95     NL        1.06     OV        1.03     
!   PT        0.95     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.027204Jy  sigma=0.715755
! Fit after  self-cal, rms=0.028134Jy  sigma=0.704211
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9995 mas, bmaj=2.513 mas, bpa=-8.374 degrees
! Estimated noise=0.178182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381901 Jy
! Component: 100  -  total flux cleaned = 0.000831123 Jy
! Component: 150  -  total flux cleaned = 0.00117433 Jy
! Component: 200  -  total flux cleaned = 0.00149266 Jy
! Total flux subtracted in 200 components = 0.00149266 Jy
! Clean residual min=-0.001851 max=0.002374 Jy/beam
! Clean residual mean=-0.000003 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.101141 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 73 components and 0.101141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027722Jy  sigma=0.691900
! Fit after  self-cal, rms=0.027653Jy  sigma=0.688203
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027653Jy  sigma=0.688203
! Fit after  self-cal, rms=0.026936Jy  sigma=0.662355
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=2.513 mas, bpa=-8.178 degrees
! Estimated noise=0.177682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025331 Jy
! Component: 100  -  total flux cleaned = 0.000586532 Jy
! Component: 150  -  total flux cleaned = 0.000814837 Jy
! Component: 200  -  total flux cleaned = 0.000816937 Jy
! Total flux subtracted in 200 components = 0.000816937 Jy
! Clean residual min=-0.001555 max=0.002035 Jy/beam
! Clean residual mean=-0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.101958 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.101958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026719Jy  sigma=0.656092
! Fit after  self-cal, rms=0.026679Jy  sigma=0.654643
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.2, 24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101157 Jy
! Component: 100  -  total flux cleaned = 0.00144445 Jy
! Component: 150  -  total flux cleaned = 0.00169014 Jy
! Component: 200  -  total flux cleaned = 0.00169008 Jy
! Total flux subtracted in 200 components = 0.00169008 Jy
! Clean residual min=-0.001257 max=0.001519 Jy/beam
! Clean residual mean=-0.000002 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.103648 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.103648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026486Jy  sigma=0.648725
! Fit after  self-cal, rms=0.026473Jy  sigma=0.648282
! Inverting map 
! Added new window around map position (0.2, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000830624 Jy
! Component: 100  -  total flux cleaned = 0.000991702 Jy
! Component: 150  -  total flux cleaned = 0.000959555 Jy
! Component: 200  -  total flux cleaned = 0.000871096 Jy
! Total flux subtracted in 200 components = 0.000871096 Jy
! Clean residual min=-0.000980 max=0.001399 Jy/beam
! Clean residual mean=-0.000002 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.104519 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 100 components and 0.104519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026341Jy  sigma=0.644525
! Fit after  self-cal, rms=0.026336Jy  sigma=0.644348
! Inverting map 
! Added new window around map position (-2.8, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000989136 Jy
! Component: 100  -  total flux cleaned = 0.001026 Jy
! Component: 150  -  total flux cleaned = 0.00105854 Jy
! Component: 200  -  total flux cleaned = 0.00105891 Jy
! Total flux subtracted in 200 components = 0.00105891 Jy
! Clean residual min=-0.000953 max=0.001160 Jy/beam
! Clean residual mean=-0.000001 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.105578 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.105578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026230Jy  sigma=0.640709
! Fit after  self-cal, rms=0.026228Jy  sigma=0.640657
! Inverting map 
! Added new window around map position (6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000455249 Jy
! Component: 100  -  total flux cleaned = 0.000427751 Jy
! Component: 150  -  total flux cleaned = 0.000427493 Jy
! Component: 200  -  total flux cleaned = 0.000379278 Jy
! Total flux subtracted in 200 components = 0.000379278 Jy
! Clean residual min=-0.000824 max=0.000838 Jy/beam
! Clean residual mean=-0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.105957 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 130 components and 0.105957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026155Jy  sigma=0.638167
! Fit after  self-cal, rms=0.026152Jy  sigma=0.638106
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026152Jy  sigma=0.638106
! Fit after  self-cal, rms=0.025799Jy  sigma=0.637606
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=2.508 mas, bpa=-8.021 degrees
! Estimated noise=0.176751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164639 Jy
! Component: 100  -  total flux cleaned = 0.000208284 Jy
! Component: 150  -  total flux cleaned = 0.000208767 Jy
! Component: 200  -  total flux cleaned = 0.000171537 Jy
! Total flux subtracted in 200 components = 0.000171537 Jy
! Clean residual min=-0.000617 max=0.000704 Jy/beam
! Clean residual mean=-0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.106129 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 144 components and 0.106129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025764Jy  sigma=0.636466
! Fit after  self-cal, rms=0.025760Jy  sigma=0.636439
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.32741e-07 Jy
! Component: 100  -  total flux cleaned = -1.95305e-07 Jy
! Component: 150  -  total flux cleaned = 1.5716e-05 Jy
! Component: 200  -  total flux cleaned = 3.07158e-05 Jy
! Total flux subtracted in 200 components = 3.07158e-05 Jy
! Clean residual min=-0.000585 max=0.000656 Jy/beam
! Clean residual mean=-0.000001 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.106159 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 157 components and 0.106159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025738Jy  sigma=0.635791
! Fit after  self-cal, rms=0.025737Jy  sigma=0.635777
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025737Jy  sigma=0.635777
! Fit after  self-cal, rms=0.025597Jy  sigma=0.635725
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=3.911 mas, bpa=-9.31 degrees
! Estimated noise=0.212282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166801 Jy
! Component: 100  -  total flux cleaned = 0.000233558 Jy
! Component: 150  -  total flux cleaned = 0.000292134 Jy
! Component: 200  -  total flux cleaned = 0.000323784 Jy
! Total flux subtracted in 200 components = 0.000323784 Jy
! Clean residual min=-0.000584 max=0.000648 Jy/beam
! Clean residual mean=-0.000002 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.106483 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 177 components and 0.106483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025592Jy  sigma=0.635479
! Fit after  self-cal, rms=0.025590Jy  sigma=0.635464
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.49663e-06 Jy
! Component: 100  -  total flux cleaned = 3.45761e-05 Jy
! Component: 150  -  total flux cleaned = 6.19303e-05 Jy
! Component: 200  -  total flux cleaned = 5.29909e-05 Jy
! Total flux subtracted in 200 components = 5.29909e-05 Jy
! Clean residual min=-0.000545 max=0.000607 Jy/beam
! Clean residual mean=-0.000002 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.106536 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 185 components and 0.106536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025586Jy  sigma=0.635345
! Fit after  self-cal, rms=0.025585Jy  sigma=0.635332
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=2.505 mas, bpa=-7.952 degrees
! Estimated noise=0.176357 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.003 x 2.505 at -7.952 degrees (North through East)
! Clean map  min=-0.0010434  max=0.034331 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7453 mas, bmaj=1.948 mas, bpa=-7.369 degrees
! Estimated noise=0.364714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0312921 Jy
! Component: 100  -  total flux cleaned = 0.0495717 Jy
! Component: 150  -  total flux cleaned = 0.0610535 Jy
! Component: 200  -  total flux cleaned = 0.0689998 Jy
! Total flux subtracted in 200 components = 0.0689998 Jy
! Clean residual min=-0.003044 max=0.005000 Jy/beam
! Clean residual mean=-0.000006 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.0689998 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0689998 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=2.505 mas, bpa=-7.952 degrees
! Estimated noise=0.176357 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00995217 Jy
! Component: 100  -  total flux cleaned = 0.0163295 Jy
! Component: 150  -  total flux cleaned = 0.0209389 Jy
! Component: 200  -  total flux cleaned = 0.024357 Jy
! Total flux subtracted in 200 components = 0.024357 Jy
! Clean residual min=-0.001499 max=0.002521 Jy/beam
! Clean residual mean=-0.000006 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.0933568 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 61 components and 0.0933568 Jy
! Inverting map 
! Added new window around map position (-1, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002741 Jy
! Component: 100  -  total flux cleaned = 0.00473052 Jy
! Component: 150  -  total flux cleaned = 0.00628199 Jy
! Component: 200  -  total flux cleaned = 0.00744915 Jy
! Total flux subtracted in 200 components = 0.00744915 Jy
! Clean residual min=-0.000930 max=0.001127 Jy/beam
! Clean residual mean=-0.000003 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.100806 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 92 components and 0.100806 Jy
! Inverting map 
! Added new window around map position (0.8, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000984238 Jy
! Component: 100  -  total flux cleaned = 0.00156748 Jy
! Component: 150  -  total flux cleaned = 0.00194703 Jy
! Component: 200  -  total flux cleaned = 0.00220443 Jy
! Total flux subtracted in 200 components = 0.00220443 Jy
! Clean residual min=-0.000758 max=0.000850 Jy/beam
! Clean residual mean=-0.000002 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.10301 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 117 components and 0.10301 Jy
! Inverting map 
! Added new window around map position (-8.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000791211 Jy
! Component: 100  -  total flux cleaned = 0.00111325 Jy
! Component: 150  -  total flux cleaned = 0.00126968 Jy
! Component: 200  -  total flux cleaned = 0.00143262 Jy
! Total flux subtracted in 200 components = 0.00143262 Jy
! Clean residual min=-0.000631 max=0.000592 Jy/beam
! Clean residual mean=-0.000001 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.104443 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 138 components and 0.104443 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=3.911 mas, bpa=-9.31 degrees
! Estimated noise=0.212282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000458164 Jy
! Component: 100  -  total flux cleaned = 0.000632221 Jy
! Component: 150  -  total flux cleaned = 0.000780958 Jy
! Component: 200  -  total flux cleaned = 0.000934393 Jy
! Total flux subtracted in 200 components = 0.000934393 Jy
! Clean residual min=-0.000595 max=0.000468 Jy/beam
! Clean residual mean=-0.000002 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.105377 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147558 Jy
! Component: 100  -  total flux cleaned = 0.00024071 Jy
! Component: 150  -  total flux cleaned = 0.00031722 Jy
! Component: 200  -  total flux cleaned = 0.000406324 Jy
! Total flux subtracted in 200 components = 0.000406324 Jy
! Clean residual min=-0.000503 max=0.000416 Jy/beam
! Clean residual mean=-0.000002 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.105784 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 179 components and 0.105784 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=2.505 mas, bpa=-7.952 degrees
! Estimated noise=0.176357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.8115e-05 Jy
! Component: 100  -  total flux cleaned = 1.10697e-05 Jy
! Component: 150  -  total flux cleaned = 2.35361e-05 Jy
! Component: 200  -  total flux cleaned = 7.13484e-05 Jy
! Total flux subtracted in 200 components = 7.13484e-05 Jy
! Clean residual min=-0.000457 max=0.000457 Jy/beam
! Clean residual mean=-0.000001 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.105855 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 199 components and 0.105855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025541Jy  sigma=0.633782
! Fit after  self-cal, rms=0.025534Jy  sigma=0.633611
wmodel /J1730-0515_X_map.mod
! wmodel: Unable to open new model file: /J1730-0515_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1730-0515_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.003 x 2.505 at -7.952 degrees (North through East)
! Clean map  min=-0.00079381  max=0.03357 Jy/beam
! Writing clean map to FITS file: .//J1730-0515_X_map.fits
wmodel .//J1730-0515_X_map.mod
! Writing 199 model components to file: .//J1730-0515_X_map.mod
wobs   .//J1730-0515_X_uvs.fits
! Writing UV FITS file: .//J1730-0515_X_uvs.fits
wwins  .//J1730-0515_X_map.win
! wwins: Wrote 10 windows to .//J1730-0515_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0335696 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000109772 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.980998 0.980998 1.962 3.92399 7.84798 15.696 31.3919 62.7838
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.033 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  305.811 
quit
! Quitting program
! Log file .//J1730-0515_X_dfm.log closed on Wed Nov 16 12:03:20 2016