! Started logfile: .//J1722-0503_X_dfm.log on Wed Nov 16 12:02:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1722-0503_X_uva.fits
! Reading UV FITS file: .//J1722-0503_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.868558 visibilities/baseline/integration-bin.
! Found source: J1722-0503
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 14696 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1722-0503_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014998Jy  sigma=31.155557
! Fit after  self-cal, rms=0.838399Jy  sigma=25.617834
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7857 mas, bmaj=1.988 mas, bpa=-3.112 degrees
! Estimated noise=0.310511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112918 Jy
! Component: 100  -  total flux cleaned = 0.15159 Jy
! Total flux subtracted in 100 components = 0.15159 Jy
! Clean residual min=-0.005276 max=0.017280 Jy/beam
! Clean residual mean=0.000017 rms=0.001862 Jy/beam
! Combined flux in latest and established models = 0.15159 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.15159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049690Jy  sigma=1.473405
! Fit after  self-cal, rms=0.049558Jy  sigma=1.469569
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196521 Jy
! Component: 100  -  total flux cleaned = 0.0299596 Jy
! Total flux subtracted in 100 components = 0.0299596 Jy
! Clean residual min=-0.004435 max=0.010699 Jy/beam
! Clean residual mean=0.000015 rms=0.001107 Jy/beam
! Combined flux in latest and established models = 0.18155 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.18155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036831Jy  sigma=1.030909
! Fit after  self-cal, rms=0.036785Jy  sigma=1.029436
! Inverting map 
! Added new window around map position (1.4, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100608 Jy
! Component: 100  -  total flux cleaned = 0.0155268 Jy
! Total flux subtracted in 100 components = 0.0155268 Jy
! Clean residual min=-0.003618 max=0.006056 Jy/beam
! Clean residual mean=0.000013 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.197077 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.197077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032720Jy  sigma=0.883647
! Fit after  self-cal, rms=0.032362Jy  sigma=0.872942
! Inverting map 
! Added new window around map position (2.8, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00535242 Jy
! Component: 100  -  total flux cleaned = 0.00897347 Jy
! Total flux subtracted in 100 components = 0.00897347 Jy
! Clean residual min=-0.003145 max=0.004270 Jy/beam
! Clean residual mean=0.000012 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.20605 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 0.20605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030984Jy  sigma=0.821533
! Fit after  self-cal, rms=0.030867Jy  sigma=0.817779
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.046 mas, bmaj=2.444 mas, bpa=-1.739 degrees
! Estimated noise=0.195867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00488916 Jy
! Component: 100  -  total flux cleaned = 0.00808042 Jy
! Component: 150  -  total flux cleaned = 0.0102753 Jy
! Component: 200  -  total flux cleaned = 0.0118311 Jy
! Total flux subtracted in 200 components = 0.0118311 Jy
! Clean residual min=-0.003391 max=0.004290 Jy/beam
! Clean residual mean=0.000018 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.217881 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 69 components and 0.217881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029960Jy  sigma=0.786907
! Fit after  self-cal, rms=0.029895Jy  sigma=0.784697
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.046 x 2.444 at -1.739 degrees (North through East)
! Clean map  min=-0.0033236  max=0.15551 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        1.02     KP        1.07     
!   LA        0.93     MK        1.00     NL        1.05     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        1.03     KP        1.06     
!   LA        0.95     MK        1.00     NL        1.06     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.02     KP        1.05     
!   LA        0.95     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.02     KP        1.05     
!   LA        0.96     MK        0.96     NL        1.06     OV        1.00     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.01     KP        1.05     
!   LA        0.96     MK        0.97     NL        1.05     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        1.02     KP        1.05     
!   LA        0.96     MK        0.99     NL        1.05     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.02     KP        1.06     
!   LA        0.96     MK        0.97     NL        1.04     OV        1.00     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        1.02     KP        1.07     
!   LA        0.96     MK        0.96     NL        1.05     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.029895Jy  sigma=0.784697
! Fit after  self-cal, rms=0.028084Jy  sigma=0.717325
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=2.447 mas, bpa=-1.708 degrees
! Estimated noise=0.195439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7.2, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201921 Jy
! Component: 100  -  total flux cleaned = 0.00259947 Jy
! Component: 150  -  total flux cleaned = 0.00293426 Jy
! Component: 200  -  total flux cleaned = 0.00310724 Jy
! Total flux subtracted in 200 components = 0.00310724 Jy
! Clean residual min=-0.001393 max=0.001268 Jy/beam
! Clean residual mean=0.000005 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.220989 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.220989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027895Jy  sigma=0.710018
! Fit after  self-cal, rms=0.027887Jy  sigma=0.709812
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027887Jy  sigma=0.709812
! Fit after  self-cal, rms=0.027778Jy  sigma=0.705002
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=2.449 mas, bpa=-1.669 degrees
! Estimated noise=0.195148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000245074 Jy
! Component: 100  -  total flux cleaned = -0.000246806 Jy
! Component: 150  -  total flux cleaned = -0.000194916 Jy
! Component: 200  -  total flux cleaned = -0.000171534 Jy
! Total flux subtracted in 200 components = -0.000171534 Jy
! Clean residual min=-0.001121 max=0.001032 Jy/beam
! Clean residual mean=0.000002 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.220817 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 105 components and 0.220817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027724Jy  sigma=0.702935
! Fit after  self-cal, rms=0.027721Jy  sigma=0.702862
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.96314e-06 Jy
! Component: 100  -  total flux cleaned = -6.34953e-06 Jy
! Component: 150  -  total flux cleaned = -6.87243e-06 Jy
! Component: 200  -  total flux cleaned = 2.42318e-05 Jy
! Total flux subtracted in 200 components = 2.42318e-05 Jy
! Clean residual min=-0.001026 max=0.001021 Jy/beam
! Clean residual mean=0.000002 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.220841 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 115 components and 0.220841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027700Jy  sigma=0.702065
! Fit after  self-cal, rms=0.027699Jy  sigma=0.702045
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027699Jy  sigma=0.702045
! Fit after  self-cal, rms=0.027692Jy  sigma=0.701764
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=2.448 mas, bpa=-1.642 degrees
! Estimated noise=0.194978 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361262 Jy
! Component: 100  -  total flux cleaned = -0.000347524 Jy
! Component: 150  -  total flux cleaned = -0.000332974 Jy
! Component: 200  -  total flux cleaned = -0.000319225 Jy
! Total flux subtracted in 200 components = -0.000319225 Jy
! Clean residual min=-0.000940 max=0.001009 Jy/beam
! Clean residual mean=0.000002 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.220522 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 124 components and 0.220522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027675Jy  sigma=0.701092
! Fit after  self-cal, rms=0.027674Jy  sigma=0.701071
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.6, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104753 Jy
! Component: 100  -  total flux cleaned = 0.00167785 Jy
! Component: 150  -  total flux cleaned = 0.00186082 Jy
! Component: 200  -  total flux cleaned = 0.00203179 Jy
! Total flux subtracted in 200 components = 0.00203179 Jy
! Clean residual min=-0.000838 max=0.000796 Jy/beam
! Clean residual mean=0.000001 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.222554 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 149 components and 0.222554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027622Jy  sigma=0.699494
! Fit after  self-cal, rms=0.027618Jy  sigma=0.699382
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027618Jy  sigma=0.699382
! Fit after  self-cal, rms=0.027585Jy  sigma=0.699244
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=3.894 mas, bpa=3.549 degrees
! Estimated noise=0.230859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000587747 Jy
! Component: 100  -  total flux cleaned = 0.000792472 Jy
! Component: 150  -  total flux cleaned = 0.00094215 Jy
! Component: 200  -  total flux cleaned = 0.000999773 Jy
! Total flux subtracted in 200 components = 0.000999773 Jy
! Clean residual min=-0.000906 max=0.000856 Jy/beam
! Clean residual mean=0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.223554 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 178 components and 0.223554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027567Jy  sigma=0.698809
! Fit after  self-cal, rms=0.027566Jy  sigma=0.698768
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211969 Jy
! Component: 100  -  total flux cleaned = 0.000276534 Jy
! Component: 150  -  total flux cleaned = 0.000323122 Jy
! Component: 200  -  total flux cleaned = 0.000375723 Jy
! Total flux subtracted in 200 components = 0.000375723 Jy
! Clean residual min=-0.000859 max=0.000799 Jy/beam
! Clean residual mean=0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.223929 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 189 components and 0.223929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027560Jy  sigma=0.698640
! Fit after  self-cal, rms=0.027559Jy  sigma=0.698628
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=2.448 mas, bpa=-1.634 degrees
! Estimated noise=0.194739 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 2.448 at -1.634 degrees (North through East)
! Clean map  min=-0.00072575  max=0.15507 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7812 mas, bmaj=1.995 mas, bpa=-2.94 degrees
! Estimated noise=0.308607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112567 Jy
! Component: 100  -  total flux cleaned = 0.151899 Jy
! Component: 150  -  total flux cleaned = 0.172111 Jy
! Component: 200  -  total flux cleaned = 0.184406 Jy
! Total flux subtracted in 200 components = 0.184406 Jy
! Clean residual min=-0.002722 max=0.006555 Jy/beam
! Clean residual mean=0.000007 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.184406 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.184406 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=2.448 mas, bpa=-1.634 degrees
! Estimated noise=0.194739 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119572 Jy
! Component: 100  -  total flux cleaned = 0.018723 Jy
! Component: 150  -  total flux cleaned = 0.0228818 Jy
! Component: 200  -  total flux cleaned = 0.0256319 Jy
! Total flux subtracted in 200 components = 0.0256319 Jy
! Clean residual min=-0.001383 max=0.001965 Jy/beam
! Clean residual mean=0.000005 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.210038 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 57 components and 0.210038 Jy
! Inverting map 
! Added new window around map position (-1, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219557 Jy
! Component: 100  -  total flux cleaned = 0.00391886 Jy
! Component: 150  -  total flux cleaned = 0.00531929 Jy
! Component: 200  -  total flux cleaned = 0.00647706 Jy
! Total flux subtracted in 200 components = 0.00647706 Jy
! Clean residual min=-0.000996 max=0.001030 Jy/beam
! Clean residual mean=0.000003 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.216515 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 96 components and 0.216516 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=3.894 mas, bpa=3.549 degrees
! Estimated noise=0.230859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157059 Jy
! Component: 100  -  total flux cleaned = 0.00275572 Jy
! Component: 150  -  total flux cleaned = 0.0037246 Jy
! Component: 200  -  total flux cleaned = 0.00452763 Jy
! Total flux subtracted in 200 components = 0.00452763 Jy
! Clean residual min=-0.000954 max=0.001015 Jy/beam
! Clean residual mean=0.000002 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.221043 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067148 Jy
! Component: 100  -  total flux cleaned = 0.00123497 Jy
! Component: 150  -  total flux cleaned = 0.00167511 Jy
! Component: 200  -  total flux cleaned = 0.00199231 Jy
! Total flux subtracted in 200 components = 0.00199231 Jy
! Clean residual min=-0.000874 max=0.000872 Jy/beam
! Clean residual mean=0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.223035 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 171 components and 0.223035 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=2.448 mas, bpa=-1.634 degrees
! Estimated noise=0.194739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225986 Jy
! Component: 100  -  total flux cleaned = 0.000416921 Jy
! Component: 150  -  total flux cleaned = 0.000540985 Jy
! Component: 200  -  total flux cleaned = 0.000668208 Jy
! Total flux subtracted in 200 components = 0.000668208 Jy
! Clean residual min=-0.000808 max=0.000751 Jy/beam
! Clean residual mean=0.000000 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.223704 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 192 components and 0.223704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027567Jy  sigma=0.698246
! Fit after  self-cal, rms=0.027562Jy  sigma=0.698086
wmodel /J1722-0503_X_map.mod
! wmodel: Unable to open new model file: /J1722-0503_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1722-0503_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 2.448 at -1.634 degrees (North through East)
! Clean map  min=-0.00078553  max=0.15524 Jy/beam
! Writing clean map to FITS file: .//J1722-0503_X_map.fits
wmodel .//J1722-0503_X_map.mod
! Writing 192 model components to file: .//J1722-0503_X_map.mod
wobs   .//J1722-0503_X_uvs.fits
! Writing UV FITS file: .//J1722-0503_X_uvs.fits
wwins  .//J1722-0503_X_map.win
! wwins: Wrote 6 windows to .//J1722-0503_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.155245 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000181502 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.350739 0.350739 0.701478 1.40296 2.80591 5.61183 11.2237 22.4473 44.8946 89.7892
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.155 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  855.336 
quit
! Quitting program
! Log file .//J1722-0503_X_dfm.log closed on Wed Nov 16 12:02:59 2016