! Started logfile: .//J1720-0832_X_dfm.log on Wed Nov 16 12:02:52 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1720-0832_X_uvm.fits
! Reading UV FITS file: .//J1720-0832_X_uvm.fits
! AN table 1: 69 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.614493 visibilities/baseline/integration-bin.
! Found source: J1720-0832
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 15264 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1720-0832_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005066Jy  sigma=30.501878
! Fit after  self-cal, rms=0.923428Jy  sigma=27.943826
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7168 mas, bmaj=1.951 mas, bpa=-9.289 degrees
! Estimated noise=0.33086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0534301 Jy
! Component: 100  -  total flux cleaned = 0.0704186 Jy
! Total flux subtracted in 100 components = 0.0704186 Jy
! Clean residual min=-0.005871 max=0.016445 Jy/beam
! Clean residual mean=-0.000004 rms=0.001460 Jy/beam
! Combined flux in latest and established models = 0.0704186 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0704186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038203Jy  sigma=1.093409
! Fit after  self-cal, rms=0.037832Jy  sigma=1.084412
! Inverting map 
! Added new window around map position (-1, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155039 Jy
! Component: 100  -  total flux cleaned = 0.0235448 Jy
! Total flux subtracted in 100 components = 0.0235448 Jy
! Clean residual min=-0.003649 max=0.007611 Jy/beam
! Clean residual mean=-0.000002 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.0939634 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 13 components and 0.0939634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029471Jy  sigma=0.806629
! Fit after  self-cal, rms=0.028571Jy  sigma=0.780038
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645972 Jy
! Component: 100  -  total flux cleaned = 0.00876373 Jy
! Total flux subtracted in 100 components = 0.00876373 Jy
! Clean residual min=-0.002913 max=0.003166 Jy/beam
! Clean residual mean=-0.000002 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.102727 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 14 components and 0.102727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026909Jy  sigma=0.726654
! Fit after  self-cal, rms=0.026718Jy  sigma=0.721052
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207296 Jy
! Component: 100  -  total flux cleaned = 0.00175251 Jy
! Total flux subtracted in 100 components = 0.00175251 Jy
! Clean residual min=-0.002322 max=0.001856 Jy/beam
! Clean residual mean=-0.000002 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.10448 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 0.10448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026441Jy  sigma=0.712951
! Fit after  self-cal, rms=0.026398Jy  sigma=0.711756
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9143 mas, bmaj=2.319 mas, bpa=-6.832 degrees
! Estimated noise=0.193348 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025361 Jy
! Component: 100  -  total flux cleaned = 0.0039854 Jy
! Component: 150  -  total flux cleaned = 0.00504542 Jy
! Component: 200  -  total flux cleaned = 0.00561483 Jy
! Total flux subtracted in 200 components = 0.00561483 Jy
! Clean residual min=-0.001764 max=0.001695 Jy/beam
! Clean residual mean=-0.000002 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.110094 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.110094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026125Jy  sigma=0.702627
! Fit after  self-cal, rms=0.026102Jy  sigma=0.701976
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9143 x 2.319 at -6.832 degrees (North through East)
! Clean map  min=-0.0016553  max=0.07176 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        0.97     KP        1.06     
!   LA        0.96     MK        0.96     NL        1.03     OV        0.97     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.92     HN        0.96     KP        1.02     
!   LA        0.96     MK        0.99     NL        1.04     OV        0.99     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.93     HN        1.01     KP        1.04     
!   LA        0.96     MK        0.97     NL        1.01     OV        1.02     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        0.97     KP        1.03     
!   LA        0.97     MK        0.99     NL        1.04     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        0.99     KP        1.04     
!   LA        0.98     MK        1.02     NL        1.05     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        0.99     KP        1.06     
!   LA        0.99     MK        1.00     NL        1.07     OV        1.02     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        1.00     KP        1.06     
!   LA        0.98     MK        0.99     NL        1.04     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        1.01     KP        1.06     
!   LA        1.04     MK        0.96     NL        1.04     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.026102Jy  sigma=0.701976
! Fit after  self-cal, rms=0.025551Jy  sigma=0.687941
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9319 mas, bmaj=2.338 mas, bpa=-6.701 degrees
! Estimated noise=0.193867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.71338e-05 Jy
! Component: 100  -  total flux cleaned = -0.000160177 Jy
! Component: 150  -  total flux cleaned = -0.000213993 Jy
! Component: 200  -  total flux cleaned = -0.000260876 Jy
! Total flux subtracted in 200 components = -0.000260876 Jy
! Clean residual min=-0.000858 max=0.000694 Jy/beam
! Clean residual mean=-0.000000 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.109834 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 56 components and 0.109834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025523Jy  sigma=0.686982
! Fit after  self-cal, rms=0.025515Jy  sigma=0.686874
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025515Jy  sigma=0.686874
! Fit after  self-cal, rms=0.025491Jy  sigma=0.683392
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.931 mas, bmaj=2.336 mas, bpa=-6.652 degrees
! Estimated noise=0.193866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.20184e-05 Jy
! Component: 100  -  total flux cleaned = -0.000163001 Jy
! Component: 150  -  total flux cleaned = -0.000223627 Jy
! Component: 200  -  total flux cleaned = -0.000267787 Jy
! Total flux subtracted in 200 components = -0.000267787 Jy
! Clean residual min=-0.000859 max=0.000691 Jy/beam
! Clean residual mean=-0.000000 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.109566 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 67 components and 0.109566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025479Jy  sigma=0.682952
! Fit after  self-cal, rms=0.025479Jy  sigma=0.682919
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.90846e-05 Jy
! Component: 100  -  total flux cleaned = -0.000100237 Jy
! Component: 150  -  total flux cleaned = -0.000118332 Jy
! Component: 200  -  total flux cleaned = -0.000127036 Jy
! Total flux subtracted in 200 components = -0.000127036 Jy
! Clean residual min=-0.000847 max=0.000659 Jy/beam
! Clean residual mean=-0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.109439 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.109439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025472Jy  sigma=0.682701
! Fit after  self-cal, rms=0.025472Jy  sigma=0.682687
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025472Jy  sigma=0.682687
! Fit after  self-cal, rms=0.025457Jy  sigma=0.682640
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9304 mas, bmaj=2.335 mas, bpa=-6.617 degrees
! Estimated noise=0.193806 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.17968e-05 Jy
! Component: 100  -  total flux cleaned = -0.000181548 Jy
! Component: 150  -  total flux cleaned = -0.000220841 Jy
! Component: 200  -  total flux cleaned = -0.000235317 Jy
! Total flux subtracted in 200 components = -0.000235317 Jy
! Clean residual min=-0.000821 max=0.000643 Jy/beam
! Clean residual mean=-0.000000 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.109203 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.109203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025451Jy  sigma=0.682456
! Fit after  self-cal, rms=0.025451Jy  sigma=0.682445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.86109e-05 Jy
! Component: 100  -  total flux cleaned = -6.27085e-05 Jy
! Component: 150  -  total flux cleaned = -8.16112e-05 Jy
! Component: 200  -  total flux cleaned = -8.15737e-05 Jy
! Total flux subtracted in 200 components = -8.15737e-05 Jy
! Clean residual min=-0.000817 max=0.000625 Jy/beam
! Clean residual mean=-0.000000 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.109122 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.109122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025448Jy  sigma=0.682346
! Fit after  self-cal, rms=0.025448Jy  sigma=0.682339
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025448Jy  sigma=0.682339
! Fit after  self-cal, rms=0.025440Jy  sigma=0.682315
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=3.863 mas, bpa=-7.353 degrees
! Estimated noise=0.244184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000151708 Jy
! Component: 100  -  total flux cleaned = -0.00016182 Jy
! Component: 150  -  total flux cleaned = -0.000170143 Jy
! Component: 200  -  total flux cleaned = -0.000166714 Jy
! Total flux subtracted in 200 components = -0.000166714 Jy
! Clean residual min=-0.000947 max=0.000709 Jy/beam
! Clean residual mean=-0.000001 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.108955 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 0.108955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025439Jy  sigma=0.682299
! Fit after  self-cal, rms=0.025439Jy  sigma=0.682295
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.85109e-05 Jy
! Component: 100  -  total flux cleaned = -3.58635e-05 Jy
! Component: 150  -  total flux cleaned = -3.58297e-05 Jy
! Component: 200  -  total flux cleaned = -3.59104e-05 Jy
! Total flux subtracted in 200 components = -3.59104e-05 Jy
! Clean residual min=-0.000939 max=0.000711 Jy/beam
! Clean residual mean=-0.000001 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.108919 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 96 components and 0.108919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025439Jy  sigma=0.682296
! Fit after  self-cal, rms=0.025439Jy  sigma=0.682293
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9299 mas, bmaj=2.334 mas, bpa=-6.59 degrees
! Estimated noise=0.193769 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9299 x 2.334 at -6.59 degrees (North through East)
! Clean map  min=-0.00074183  max=0.071403 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.713 mas, bmaj=1.954 mas, bpa=-9.264 degrees
! Estimated noise=0.335776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0544259 Jy
! Component: 100  -  total flux cleaned = 0.0768936 Jy
! Component: 150  -  total flux cleaned = 0.08937 Jy
! Component: 200  -  total flux cleaned = 0.0966132 Jy
! Total flux subtracted in 200 components = 0.0966132 Jy
! Clean residual min=-0.001990 max=0.003617 Jy/beam
! Clean residual mean=-0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0966132 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0966132 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9299 mas, bmaj=2.334 mas, bpa=-6.59 degrees
! Estimated noise=0.193769 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00563579 Jy
! Component: 100  -  total flux cleaned = 0.00837612 Jy
! Component: 150  -  total flux cleaned = 0.00994959 Jy
! Component: 200  -  total flux cleaned = 0.0109203 Jy
! Total flux subtracted in 200 components = 0.0109203 Jy
! Clean residual min=-0.000828 max=0.000694 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.107533 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.107533 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=3.863 mas, bpa=-7.353 degrees
! Estimated noise=0.244184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000872851 Jy
! Component: 100  -  total flux cleaned = 0.00128007 Jy
! Component: 150  -  total flux cleaned = 0.00135673 Jy
! Component: 200  -  total flux cleaned = 0.00135648 Jy
! Total flux subtracted in 200 components = 0.00135648 Jy
! Clean residual min=-0.000969 max=0.000738 Jy/beam
! Clean residual mean=-0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.10889 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.48552e-06 Jy
! Component: 100  -  total flux cleaned = 2.66374e-05 Jy
! Component: 150  -  total flux cleaned = 3.42594e-05 Jy
! Component: 200  -  total flux cleaned = 4.15753e-05 Jy
! Total flux subtracted in 200 components = 4.15753e-05 Jy
! Clean residual min=-0.000957 max=0.000722 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.108932 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 65 components and 0.108932 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9299 mas, bmaj=2.334 mas, bpa=-6.59 degrees
! Estimated noise=0.193769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.36295e-05 Jy
! Component: 100  -  total flux cleaned = -2.37792e-05 Jy
! Component: 150  -  total flux cleaned = -3.33467e-05 Jy
! Component: 200  -  total flux cleaned = -3.3148e-05 Jy
! Total flux subtracted in 200 components = -3.3148e-05 Jy
! Clean residual min=-0.000774 max=0.000629 Jy/beam
! Clean residual mean=-0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.108898 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.108898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025445Jy  sigma=0.682454
! Fit after  self-cal, rms=0.025442Jy  sigma=0.682380
wmodel /J1720-0832_X_map.mod
! wmodel: Unable to open new model file: /J1720-0832_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1720-0832_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9299 x 2.334 at -6.59 degrees (North through East)
! Clean map  min=-0.00074194  max=0.071352 Jy/beam
! Writing clean map to FITS file: .//J1720-0832_X_map.fits
wmodel .//J1720-0832_X_map.mod
! Writing 78 model components to file: .//J1720-0832_X_map.mod
wobs   .//J1720-0832_X_uvs.fits
! Writing UV FITS file: .//J1720-0832_X_uvs.fits
wwins  .//J1720-0832_X_map.win
! wwins: Wrote 3 windows to .//J1720-0832_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0713519 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000161314 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.678248 0.678248 1.3565 2.71299 5.42598 10.852 21.7039 43.4078 86.8157
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  442.316 
quit
! Quitting program
! Log file .//J1720-0832_X_dfm.log closed on Wed Nov 16 12:02:54 2016