! Started logfile: .//J1707+0148_X_dfm.log on Wed Nov 16 12:02:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1707+0148_X_uvm.fits
! Reading UV FITS file: .//J1707+0148_X_uvm.fits
! AN table 1: 69 integrations on 45 of 45 possible baselines.
! AN table 2: 22 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.829099 visibilities/baseline/integration-bin.
! Found source: J1707+0148
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 25848 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1707+0148_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 27 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.306850Jy  sigma=39.831427
! Fit after  self-cal, rms=0.205987Jy  sigma=6.654221
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8235 mas, bmaj=1.979 mas, bpa=-0.4667 degrees
! Estimated noise=0.225702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.632849 Jy
! Component: 100  -  total flux cleaned = 0.772319 Jy
! Total flux subtracted in 100 components = 0.772319 Jy
! Clean residual min=-0.022051 max=0.045168 Jy/beam
! Clean residual mean=-0.000046 rms=0.006033 Jy/beam
! Combined flux in latest and established models = 0.772319 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.772319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.131172Jy  sigma=3.345782
! Fit after  self-cal, rms=0.131169Jy  sigma=3.345621
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0469049 Jy
! Component: 100  -  total flux cleaned = 0.061854 Jy
! Total flux subtracted in 100 components = 0.061854 Jy
! Clean residual min=-0.018552 max=0.023237 Jy/beam
! Clean residual mean=-0.000027 rms=0.004127 Jy/beam
! Combined flux in latest and established models = 0.834173 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.834173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.109551Jy  sigma=2.860438
! Fit after  self-cal, rms=0.109471Jy  sigma=2.857645
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9581 mas, bmaj=2.222 mas, bpa=-1.1 degrees
! Estimated noise=0.147734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00835634 Jy
! Component: 100  -  total flux cleaned = 0.00949262 Jy
! Component: 150  -  total flux cleaned = 0.00979075 Jy
! Component: 200  -  total flux cleaned = 0.0102984 Jy
! Total flux subtracted in 200 components = 0.0102984 Jy
! Clean residual min=-0.015964 max=0.019261 Jy/beam
! Clean residual mean=-0.000035 rms=0.003964 Jy/beam
! Combined flux in latest and established models = 0.844471 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.844471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.106049Jy  sigma=2.803204
! Fit after  self-cal, rms=0.106002Jy  sigma=2.801833
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9581 x 2.222 at -1.1 degrees (North through East)
! Clean map  min=-0.01547  max=0.81776 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.96     KP        1.08     
!   LA        0.98     MK        0.97     NL        1.03     OV        1.00     
!   PT        1.00     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     HN        0.95     KP        1.08     
!   LA        0.99     MK        0.98     NL        1.03     OV        1.00     
!   PT        1.00     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.94     KP        1.08     
!   LA        0.99     MK        0.98     NL        1.02     OV        1.00     
!   PT        1.00     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.95     KP        1.07     
!   LA        0.99     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.00     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        0.95     KP        1.07     
!   LA        0.99     MK        1.01     NL        1.03     OV        1.00     
!   PT        1.00     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.96     HN        0.95     KP        1.07     
!   LA        0.99     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        0.97     KP        1.07     
!   LA        0.98     MK        1.04     NL        1.03     OV        1.00     
!   PT        1.00     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.96     HN        0.97     KP        1.07     
!   LA        0.99     MK        1.04     NL        1.03     OV        0.99     
!   PT        1.00     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.106002Jy  sigma=2.801833
! Fit after  self-cal, rms=0.097652Jy  sigma=2.406058
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9521 mas, bmaj=2.225 mas, bpa=-1.102 degrees
! Estimated noise=0.150103 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014235 Jy
! Component: 100  -  total flux cleaned = 0.02015 Jy
! Component: 150  -  total flux cleaned = 0.0209868 Jy
! Component: 200  -  total flux cleaned = 0.0209819 Jy
! Total flux subtracted in 200 components = 0.0209819 Jy
! Clean residual min=-0.004940 max=0.007115 Jy/beam
! Clean residual mean=-0.000011 rms=0.001374 Jy/beam
! Combined flux in latest and established models = 0.865453 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.865453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.094054Jy  sigma=2.369492
! Fit after  self-cal, rms=0.094023Jy  sigma=2.368532
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.094023Jy  sigma=2.368532
! Fit after  self-cal, rms=0.066600Jy  sigma=1.259492
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9498 mas, bmaj=2.223 mas, bpa=-1.175 degrees
! Estimated noise=0.151865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00946346 Jy
! Component: 100  -  total flux cleaned = 0.0133268 Jy
! Component: 150  -  total flux cleaned = 0.01408 Jy
! Component: 200  -  total flux cleaned = 0.0140093 Jy
! Total flux subtracted in 200 components = 0.0140093 Jy
! Clean residual min=-0.004613 max=0.006388 Jy/beam
! Clean residual mean=-0.000007 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.879462 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.879462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064183Jy  sigma=1.225677
! Fit after  self-cal, rms=0.064175Jy  sigma=1.225093
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00638289 Jy
! Component: 100  -  total flux cleaned = 0.00725156 Jy
! Component: 150  -  total flux cleaned = 0.00725054 Jy
! Component: 200  -  total flux cleaned = 0.00708352 Jy
! Total flux subtracted in 200 components = 0.00708352 Jy
! Clean residual min=-0.004210 max=0.004534 Jy/beam
! Clean residual mean=-0.000005 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.886546 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 0.886546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063201Jy  sigma=1.198747
! Fit after  self-cal, rms=0.063174Jy  sigma=1.197570
! Inverting map 
! Added new window around map position (1.8, -19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00383469 Jy
! Component: 100  -  total flux cleaned = 0.00537756 Jy
! Component: 150  -  total flux cleaned = 0.00574664 Jy
! Component: 200  -  total flux cleaned = 0.00574397 Jy
! Total flux subtracted in 200 components = 0.00574397 Jy
! Clean residual min=-0.003650 max=0.004131 Jy/beam
! Clean residual mean=-0.000003 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.89229 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 0.89229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.062657Jy  sigma=1.188767
! Fit after  self-cal, rms=0.062639Jy  sigma=1.188125
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.062639Jy  sigma=1.188125
! Fit after  self-cal, rms=0.055391Jy  sigma=1.019336
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9487 mas, bmaj=2.222 mas, bpa=-1.209 degrees
! Estimated noise=0.153023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055475 Jy
! Component: 100  -  total flux cleaned = 0.0082153 Jy
! Component: 150  -  total flux cleaned = 0.0100797 Jy
! Component: 200  -  total flux cleaned = 0.0107858 Jy
! Total flux subtracted in 200 components = 0.0107858 Jy
! Clean residual min=-0.003480 max=0.003842 Jy/beam
! Clean residual mean=-0.000003 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.903076 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 77 components and 0.903076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054216Jy  sigma=1.005234
! Fit after  self-cal, rms=0.054209Jy  sigma=1.004837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12, 31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223131 Jy
! Component: 100  -  total flux cleaned = 0.00227783 Jy
! Component: 150  -  total flux cleaned = 0.00272651 Jy
! Component: 200  -  total flux cleaned = 0.00297131 Jy
! Total flux subtracted in 200 components = 0.00297131 Jy
! Clean residual min=-0.003158 max=0.003578 Jy/beam
! Clean residual mean=-0.000002 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.906047 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 99 components and 0.906047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053786Jy  sigma=0.998441
! Fit after  self-cal, rms=0.053770Jy  sigma=0.997768
! Inverting map 
! Added new window around map position (21.6, -27.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027092 Jy
! Component: 100  -  total flux cleaned = 0.00282039 Jy
! Component: 150  -  total flux cleaned = 0.00292154 Jy
! Component: 200  -  total flux cleaned = 0.00292128 Jy
! Total flux subtracted in 200 components = 0.00292128 Jy
! Clean residual min=-0.002672 max=0.002835 Jy/beam
! Clean residual mean=-0.000001 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.908968 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 126 components and 0.908968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053448Jy  sigma=0.992910
! Fit after  self-cal, rms=0.053431Jy  sigma=0.992207
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053431Jy  sigma=0.992207
! Fit after  self-cal, rms=0.049920Jy  sigma=0.925481
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.007 mas, bmaj=3.36 mas, bpa=-7.455 degrees
! Estimated noise=0.19826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00483499 Jy
! Component: 100  -  total flux cleaned = 0.00735342 Jy
! Component: 150  -  total flux cleaned = 0.00866846 Jy
! Component: 200  -  total flux cleaned = 0.00904059 Jy
! Total flux subtracted in 200 components = 0.00904059 Jy
! Clean residual min=-0.003597 max=0.003620 Jy/beam
! Clean residual mean=-0.000001 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.918009 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.918009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049161Jy  sigma=0.918355
! Fit after  self-cal, rms=0.049147Jy  sigma=0.917706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108466 Jy
! Component: 100  -  total flux cleaned = 0.00124947 Jy
! Component: 150  -  total flux cleaned = 0.00132252 Jy
! Component: 200  -  total flux cleaned = 0.00142115 Jy
! Total flux subtracted in 200 components = 0.00142115 Jy
! Clean residual min=-0.003431 max=0.003476 Jy/beam
! Clean residual mean=-0.000000 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.91943 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 163 components and 0.91943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049031Jy  sigma=0.917213
! Fit after  self-cal, rms=0.049029Jy  sigma=0.917109
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.948 mas, bmaj=2.221 mas, bpa=-1.242 degrees
! Estimated noise=0.153845 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.948 x 2.221 at -1.242 degrees (North through East)
! Clean map  min=-0.0030562  max=0.84717 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049029Jy  sigma=0.917109
! Fit after  self-cal, rms=0.047702Jy  sigma=0.873455
! Inverting map and beam 
! Estimated beam: bmin=0.9473 mas, bmaj=2.219 mas, bpa=-1.261 degrees
! Estimated noise=0.154401 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328389 Jy
! Component: 100  -  total flux cleaned = 0.00511612 Jy
! Component: 150  -  total flux cleaned = 0.00564035 Jy
! Component: 200  -  total flux cleaned = 0.00584195 Jy
! Total flux subtracted in 200 components = 0.00584195 Jy
! Clean residual min=-0.002668 max=0.003539 Jy/beam
! Clean residual mean=-0.000001 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.925272 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 182 components and 0.925272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047134Jy  sigma=0.867416
! Fit after  self-cal, rms=0.047127Jy  sigma=0.867136
! Inverting map 
! Added new window around map position (8.6, 49.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027978 Jy
! Component: 100  -  total flux cleaned = 0.00318424 Jy
! Component: 150  -  total flux cleaned = 0.00328083 Jy
! Component: 200  -  total flux cleaned = 0.00332356 Jy
! Total flux subtracted in 200 components = 0.00332356 Jy
! Clean residual min=-0.002548 max=0.002584 Jy/beam
! Clean residual mean=0.000001 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.928596 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 202 components and 0.928596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046769Jy  sigma=0.861704
! Fit after  self-cal, rms=0.046757Jy  sigma=0.861093
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046757Jy  sigma=0.861093
! Fit after  self-cal, rms=0.046459Jy  sigma=0.850612
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8145 mas, bmaj=1.982 mas, bpa=-0.7749 degrees
! Estimated noise=0.235424 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.659908 Jy
! Component: 100  -  total flux cleaned = 0.807838 Jy
! Component: 150  -  total flux cleaned = 0.860514 Jy
! Component: 200  -  total flux cleaned = 0.885514 Jy
! Total flux subtracted in 200 components = 0.885514 Jy
! Clean residual min=-0.010440 max=0.011618 Jy/beam
! Clean residual mean=-0.000014 rms=0.002156 Jy/beam
! Combined flux in latest and established models = 0.885514 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.885514 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.947 mas, bmaj=2.219 mas, bpa=-1.283 degrees
! Estimated noise=0.154976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164047 Jy
! Component: 100  -  total flux cleaned = 0.0235993 Jy
! Component: 150  -  total flux cleaned = 0.0284243 Jy
! Component: 200  -  total flux cleaned = 0.0326924 Jy
! Total flux subtracted in 200 components = 0.0326924 Jy
! Clean residual min=-0.005244 max=0.005968 Jy/beam
! Clean residual mean=-0.000004 rms=0.001305 Jy/beam
! Combined flux in latest and established models = 0.918206 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.918206 Jy
! Inverting map 
! Added new window around map position (20.6, 18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00397138 Jy
! Component: 100  -  total flux cleaned = 0.00667208 Jy
! Component: 150  -  total flux cleaned = 0.00902529 Jy
! Component: 200  -  total flux cleaned = 0.0109529 Jy
! Total flux subtracted in 200 components = 0.0109529 Jy
! Clean residual min=-0.003957 max=0.003889 Jy/beam
! Clean residual mean=-0.000001 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 0.929159 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 59 components and 0.929159 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.004 mas, bmaj=3.358 mas, bpa=-7.482 degrees
! Estimated noise=0.200072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390158 Jy
! Component: 100  -  total flux cleaned = 0.00510234 Jy
! Component: 150  -  total flux cleaned = 0.00572174 Jy
! Component: 200  -  total flux cleaned = 0.00613522 Jy
! Total flux subtracted in 200 components = 0.00613522 Jy
! Clean residual min=-0.003217 max=0.003623 Jy/beam
! Clean residual mean=0.000003 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.935294 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126686 Jy
! Component: 100  -  total flux cleaned = 0.000184768 Jy
! Component: 150  -  total flux cleaned = 0.000294068 Jy
! Component: 200  -  total flux cleaned = 0.000345292 Jy
! Total flux subtracted in 200 components = 0.000345292 Jy
! Clean residual min=-0.003180 max=0.003487 Jy/beam
! Clean residual mean=0.000004 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.935639 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 93 components and 0.935639 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.947 mas, bmaj=2.219 mas, bpa=-1.283 degrees
! Estimated noise=0.154976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108672 Jy
! Component: 100  -  total flux cleaned = 0.00020234 Jy
! Component: 150  -  total flux cleaned = 2.84699e-05 Jy
! Component: 200  -  total flux cleaned = -5.13516e-05 Jy
! Total flux subtracted in 200 components = -5.13516e-05 Jy
! Clean residual min=-0.003350 max=0.003036 Jy/beam
! Clean residual mean=0.000001 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.935588 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 115 components and 0.935588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046374Jy  sigma=0.861799
! Fit after  self-cal, rms=0.046357Jy  sigma=0.860717
wmodel /J1707+0148_X_map.mod
! wmodel: Unable to open new model file: /J1707+0148_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1707+0148_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.947 x 2.219 at -1.283 degrees (North through East)
! Clean map  min=-0.0032776  max=0.84924 Jy/beam
! Writing clean map to FITS file: .//J1707+0148_X_map.fits
wmodel .//J1707+0148_X_map.mod
! Writing 115 model components to file: .//J1707+0148_X_map.mod
wobs   .//J1707+0148_X_uvs.fits
! Writing UV FITS file: .//J1707+0148_X_uvs.fits
wwins  .//J1707+0148_X_map.win
! wwins: Wrote 7 windows to .//J1707+0148_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.849236 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000767081 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.270978 0.270978 0.541956 1.08391 2.16782 4.33565 8.6713 17.3426 34.6852 69.3704
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.849 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1107.1 
quit
! Quitting program
! Log file .//J1707+0148_X_dfm.log closed on Wed Nov 16 12:02:44 2016