! Started logfile: .//J1658+0741_X_dfm.log on Wed Nov 16 12:02:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1658+0741_X_uva.fits
! Reading UV FITS file: .//J1658+0741_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.775926 visibilities/baseline/integration-bin.
! Found source: J1658+0741
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 10056 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1658+0741_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.130489Jy  sigma=37.706751
! Fit after  self-cal, rms=0.443643Jy  sigma=14.710306
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7525 mas, bmaj=2.134 mas, bpa=-5.464 degrees
! Estimated noise=0.377977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.425132 Jy
! Component: 100  -  total flux cleaned = 0.542247 Jy
! Total flux subtracted in 100 components = 0.542247 Jy
! Clean residual min=-0.027086 max=0.048999 Jy/beam
! Clean residual mean=-0.000003 rms=0.006977 Jy/beam
! Combined flux in latest and established models = 0.542247 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.542247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.115094Jy  sigma=3.830147
! Fit after  self-cal, rms=0.114825Jy  sigma=3.823294
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0528847 Jy
! Component: 100  -  total flux cleaned = 0.0791887 Jy
! Total flux subtracted in 100 components = 0.0791887 Jy
! Clean residual min=-0.023691 max=0.037491 Jy/beam
! Clean residual mean=-0.000000 rms=0.004801 Jy/beam
! Combined flux in latest and established models = 0.621436 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.621436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.079820Jy  sigma=2.652640
! Fit after  self-cal, rms=0.079606Jy  sigma=2.645926
! Inverting map 
! Added new window around map position (-1.6, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0305702 Jy
! Component: 100  -  total flux cleaned = 0.0440968 Jy
! Total flux subtracted in 100 components = 0.0440968 Jy
! Clean residual min=-0.021962 max=0.023193 Jy/beam
! Clean residual mean=-0.000001 rms=0.003728 Jy/beam
! Combined flux in latest and established models = 0.665533 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.665533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064954Jy  sigma=2.123872
! Fit after  self-cal, rms=0.063511Jy  sigma=2.086122
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.98 mas, bmaj=2.293 mas, bpa=-0.5814 degrees
! Estimated noise=0.214233 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176677 Jy
! Component: 100  -  total flux cleaned = 0.0291226 Jy
! Component: 150  -  total flux cleaned = 0.0374568 Jy
! Component: 200  -  total flux cleaned = 0.0436151 Jy
! Total flux subtracted in 200 components = 0.0436151 Jy
! Clean residual min=-0.019406 max=0.028535 Jy/beam
! Clean residual mean=0.000010 rms=0.004746 Jy/beam
! Combined flux in latest and established models = 0.709148 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 44 components and 0.709148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057502Jy  sigma=1.875461
! Fit after  self-cal, rms=0.057128Jy  sigma=1.865609
! Inverting map 
! Added new window around map position (-5.4, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237007 Jy
! Component: 100  -  total flux cleaned = 0.0326646 Jy
! Component: 150  -  total flux cleaned = 0.0385566 Jy
! Component: 200  -  total flux cleaned = 0.0435348 Jy
! Total flux subtracted in 200 components = 0.0435348 Jy
! Clean residual min=-0.015026 max=0.015442 Jy/beam
! Clean residual mean=0.000004 rms=0.003495 Jy/beam
! Combined flux in latest and established models = 0.752682 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 72 components and 0.752682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045965Jy  sigma=1.471468
! Fit after  self-cal, rms=0.045358Jy  sigma=1.449780
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.98 x 2.293 at -0.5814 degrees (North through East)
! Clean map  min=-0.014703  max=0.5559 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.04     KP        1.05     
!   LA        0.95     MK        0.99     NL        1.08     OV        1.02     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        1.03     KP        1.04     
!   LA        0.95     MK        0.99     NL        1.07     OV        1.02     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.03     KP        1.04     
!   LA        0.96     MK        1.00     NL        1.08     OV        1.02     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.03     KP        1.03     
!   LA        0.95     MK        0.99     NL        1.08     OV        1.02     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.03     KP        1.03     
!   LA        0.95     MK        0.98     NL        1.07     OV        1.01     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.02     KP        1.03     
!   LA        0.95     MK        0.98     NL        1.07     OV        1.01     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.02     KP        1.04     
!   LA        0.95     MK        0.99     NL        1.07     OV        1.01     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.01     KP        1.03     
!   LA        0.94     MK        0.98     NL        1.07     OV        1.02     
!   PT        0.95     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.045358Jy  sigma=1.449780
! Fit after  self-cal, rms=0.029603Jy  sigma=0.903193
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9778 mas, bmaj=2.304 mas, bpa=-0.4801 degrees
! Estimated noise=0.213826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00583936 Jy
! Component: 100  -  total flux cleaned = 0.0065606 Jy
! Component: 150  -  total flux cleaned = 0.00717257 Jy
! Component: 200  -  total flux cleaned = 0.00771366 Jy
! Total flux subtracted in 200 components = 0.00771366 Jy
! Clean residual min=-0.005051 max=0.005013 Jy/beam
! Clean residual mean=0.000004 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.760396 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.760396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027114Jy  sigma=0.812520
! Fit after  self-cal, rms=0.027025Jy  sigma=0.808741
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027025Jy  sigma=0.808741
! Fit after  self-cal, rms=0.026779Jy  sigma=0.800778
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9784 mas, bmaj=2.305 mas, bpa=-0.4834 degrees
! Estimated noise=0.213755 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023706 Jy
! Component: 100  -  total flux cleaned = 0.00307508 Jy
! Component: 150  -  total flux cleaned = 0.00348275 Jy
! Component: 200  -  total flux cleaned = 0.00393451 Jy
! Total flux subtracted in 200 components = 0.00393451 Jy
! Clean residual min=-0.003859 max=0.003894 Jy/beam
! Clean residual mean=0.000003 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.764331 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 106 components and 0.764331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025849Jy  sigma=0.766250
! Fit after  self-cal, rms=0.025824Jy  sigma=0.765161
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000809848 Jy
! Component: 100  -  total flux cleaned = 0.000881677 Jy
! Component: 150  -  total flux cleaned = 0.000948382 Jy
! Component: 200  -  total flux cleaned = 0.00101117 Jy
! Total flux subtracted in 200 components = 0.00101117 Jy
! Clean residual min=-0.003679 max=0.003623 Jy/beam
! Clean residual mean=0.000003 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.765342 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 115 components and 0.765342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025466Jy  sigma=0.752466
! Fit after  self-cal, rms=0.025455Jy  sigma=0.751877
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025455Jy  sigma=0.751877
! Fit after  self-cal, rms=0.025329Jy  sigma=0.746604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9788 mas, bmaj=2.307 mas, bpa=-0.4915 degrees
! Estimated noise=0.213766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101128 Jy
! Component: 100  -  total flux cleaned = 0.00149425 Jy
! Component: 150  -  total flux cleaned = 0.00179186 Jy
! Component: 200  -  total flux cleaned = 0.00189937 Jy
! Total flux subtracted in 200 components = 0.00189937 Jy
! Clean residual min=-0.002876 max=0.003404 Jy/beam
! Clean residual mean=0.000003 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.767241 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 122 components and 0.767241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025022Jy  sigma=0.734598
! Fit after  self-cal, rms=0.025010Jy  sigma=0.734195
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, 44.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282874 Jy
! Component: 100  -  total flux cleaned = 0.00394099 Jy
! Component: 150  -  total flux cleaned = 0.00469552 Jy
! Component: 200  -  total flux cleaned = 0.00524746 Jy
! Total flux subtracted in 200 components = 0.00524746 Jy
! Clean residual min=-0.002674 max=0.002712 Jy/beam
! Clean residual mean=0.000003 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.772488 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 142 components and 0.772489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024628Jy  sigma=0.720897
! Fit after  self-cal, rms=0.024623Jy  sigma=0.720710
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024623Jy  sigma=0.720710
! Fit after  self-cal, rms=0.024591Jy  sigma=0.718948
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.143 mas, bmaj=3.323 mas, bpa=2.502 degrees
! Estimated noise=0.259512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204763 Jy
! Component: 100  -  total flux cleaned = 0.00332692 Jy
! Component: 150  -  total flux cleaned = 0.00390904 Jy
! Component: 200  -  total flux cleaned = 0.00433403 Jy
! Total flux subtracted in 200 components = 0.00433403 Jy
! Clean residual min=-0.002918 max=0.003436 Jy/beam
! Clean residual mean=0.000005 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.776823 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 150 components and 0.776823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024497Jy  sigma=0.714941
! Fit after  self-cal, rms=0.024491Jy  sigma=0.714606
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000364703 Jy
! Component: 100  -  total flux cleaned = 0.000683381 Jy
! Component: 150  -  total flux cleaned = 0.000904964 Jy
! Component: 200  -  total flux cleaned = 0.00107693 Jy
! Total flux subtracted in 200 components = 0.00107693 Jy
! Clean residual min=-0.002807 max=0.003280 Jy/beam
! Clean residual mean=0.000005 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.7779 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 162 components and 0.7779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024459Jy  sigma=0.713278
! Fit after  self-cal, rms=0.024456Jy  sigma=0.713153
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9792 mas, bmaj=2.308 mas, bpa=-0.4934 degrees
! Estimated noise=0.213749 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9792 x 2.308 at -0.4934 degrees (North through East)
! Clean map  min=-0.0020406  max=0.55429 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024456Jy  sigma=0.713153
! Fit after  self-cal, rms=0.023052Jy  sigma=0.666385
! Inverting map and beam 
! Estimated beam: bmin=0.9797 mas, bmaj=2.309 mas, bpa=-0.4706 degrees
! Estimated noise=0.213739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156815 Jy
! Component: 100  -  total flux cleaned = 0.000196716 Jy
! Component: 150  -  total flux cleaned = 0.000198541 Jy
! Component: 200  -  total flux cleaned = 0.000269535 Jy
! Total flux subtracted in 200 components = 0.000269535 Jy
! Clean residual min=-0.002052 max=0.002308 Jy/beam
! Clean residual mean=0.000002 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.778169 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 174 components and 0.778169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022916Jy  sigma=0.661665
! Fit after  self-cal, rms=0.022911Jy  sigma=0.661504
! Inverting map 
! Added new window around map position (-9.2, 10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199197 Jy
! Component: 100  -  total flux cleaned = 0.00255484 Jy
! Component: 150  -  total flux cleaned = 0.00290044 Jy
! Component: 200  -  total flux cleaned = 0.00321222 Jy
! Total flux subtracted in 200 components = 0.00321222 Jy
! Clean residual min=-0.001819 max=0.002155 Jy/beam
! Clean residual mean=0.000002 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.781382 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 195 components and 0.781382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022697Jy  sigma=0.653583
! Fit after  self-cal, rms=0.022688Jy  sigma=0.653406
! Inverting map 
! Added new window around map position (0.4, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215578 Jy
! Component: 100  -  total flux cleaned = 0.00304119 Jy
! Component: 150  -  total flux cleaned = 0.00378421 Jy
! Component: 200  -  total flux cleaned = 0.00448268 Jy
! Total flux subtracted in 200 components = 0.00448268 Jy
! Clean residual min=-0.001630 max=0.001649 Jy/beam
! Clean residual mean=0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.785864 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 224 components and 0.785864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022469Jy  sigma=0.643144
! Fit after  self-cal, rms=0.022463Jy  sigma=0.643022
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022463Jy  sigma=0.643022
! Fit after  self-cal, rms=0.022425Jy  sigma=0.642309
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7514 mas, bmaj=2.139 mas, bpa=-5.283 degrees
! Estimated noise=0.377587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.424844 Jy
! Component: 100  -  total flux cleaned = 0.544017 Jy
! Component: 150  -  total flux cleaned = 0.602598 Jy
! Component: 200  -  total flux cleaned = 0.637354 Jy
! Total flux subtracted in 200 components = 0.637354 Jy
! Clean residual min=-0.011431 max=0.018681 Jy/beam
! Clean residual mean=0.000002 rms=0.003158 Jy/beam
! Combined flux in latest and established models = 0.637354 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.637354 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9798 mas, bmaj=2.309 mas, bpa=-0.4707 degrees
! Estimated noise=0.213647 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0319063 Jy
! Component: 100  -  total flux cleaned = 0.0534579 Jy
! Component: 150  -  total flux cleaned = 0.0689828 Jy
! Component: 200  -  total flux cleaned = 0.080503 Jy
! Total flux subtracted in 200 components = 0.080503 Jy
! Clean residual min=-0.004931 max=0.007320 Jy/beam
! Clean residual mean=0.000008 rms=0.001993 Jy/beam
! Combined flux in latest and established models = 0.717857 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 46 components and 0.717857 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.143 mas, bmaj=3.324 mas, bpa=2.512 degrees
! Estimated noise=0.25923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145876 Jy
! Component: 100  -  total flux cleaned = 0.024658 Jy
! Component: 150  -  total flux cleaned = 0.0320857 Jy
! Component: 200  -  total flux cleaned = 0.0376844 Jy
! Total flux subtracted in 200 components = 0.0376844 Jy
! Clean residual min=-0.003969 max=0.003979 Jy/beam
! Clean residual mean=0.000008 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.755541 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042806 Jy
! Component: 100  -  total flux cleaned = 0.00760205 Jy
! Component: 150  -  total flux cleaned = 0.0102916 Jy
! Component: 200  -  total flux cleaned = 0.0125865 Jy
! Total flux subtracted in 200 components = 0.0125865 Jy
! Clean residual min=-0.002774 max=0.002137 Jy/beam
! Clean residual mean=0.000006 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.768128 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 146 components and 0.768128 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9798 mas, bmaj=2.309 mas, bpa=-0.4707 degrees
! Estimated noise=0.213647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203325 Jy
! Component: 100  -  total flux cleaned = 0.00345022 Jy
! Component: 150  -  total flux cleaned = 0.00462829 Jy
! Component: 200  -  total flux cleaned = 0.00584689 Jy
! Total flux subtracted in 200 components = 0.00584689 Jy
! Clean residual min=-0.002271 max=0.002165 Jy/beam
! Clean residual mean=0.000002 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.773975 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 171 components and 0.773975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023180Jy  sigma=0.668206
! Fit after  self-cal, rms=0.023052Jy  sigma=0.664110
wmodel /J1658+0741_X_map.mod
! wmodel: Unable to open new model file: /J1658+0741_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1658+0741_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9798 x 2.309 at -0.4707 degrees (North through East)
! Clean map  min=-0.0019776  max=0.55743 Jy/beam
! Writing clean map to FITS file: .//J1658+0741_X_map.fits
wmodel .//J1658+0741_X_map.mod
! Writing 171 model components to file: .//J1658+0741_X_map.mod
wobs   .//J1658+0741_X_uvs.fits
! Writing UV FITS file: .//J1658+0741_X_uvs.fits
wwins  .//J1658+0741_X_map.win
! wwins: Wrote 6 windows to .//J1658+0741_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.557427 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000523875 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.281943 0.281943 0.563885 1.12777 2.25554 4.51108 9.02216 18.0443 36.0886 72.1773
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.557 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1064.05 
quit
! Quitting program
! Log file .//J1658+0741_X_dfm.log closed on Wed Nov 16 12:02:29 2016