! Started logfile: .//J1631+4348_X_dfm.log on Wed Nov 16 12:02:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1631+4348_X_uvm.fits
! Reading UV FITS file: .//J1631+4348_X_uvm.fits
! AN table 1: 96 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.760648 visibilities/baseline/integration-bin.
! Found source: J1631+4348
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 26288 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1631+4348_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 138 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007198Jy  sigma=32.577147
! Fit after  self-cal, rms=0.875921Jy  sigma=28.391425
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7776 mas, bmaj=1.458 mas, bpa=-13.97 degrees
! Estimated noise=0.26416 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0929014 Jy
! Component: 100  -  total flux cleaned = 0.115318 Jy
! Total flux subtracted in 100 components = 0.115318 Jy
! Clean residual min=-0.003389 max=0.008962 Jy/beam
! Clean residual mean=-0.000007 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.115318 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.115318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034140Jy  sigma=0.908427
! Fit after  self-cal, rms=0.034120Jy  sigma=0.907157
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00947925 Jy
! Component: 100  -  total flux cleaned = 0.014071 Jy
! Total flux subtracted in 100 components = 0.014071 Jy
! Clean residual min=-0.002138 max=0.003610 Jy/beam
! Clean residual mean=-0.000005 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.129389 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.129389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030547Jy  sigma=0.773887
! Fit after  self-cal, rms=0.030521Jy  sigma=0.772609
! Inverting map 
! Added new window around map position (0.6, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360742 Jy
! Component: 100  -  total flux cleaned = 0.00582779 Jy
! Total flux subtracted in 100 components = 0.00582779 Jy
! Clean residual min=-0.002092 max=0.002721 Jy/beam
! Clean residual mean=-0.000004 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.135217 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.135217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029814Jy  sigma=0.746095
! Fit after  self-cal, rms=0.029782Jy  sigma=0.744741
! Inverting map 
! Added new window around map position (2, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246066 Jy
! Component: 100  -  total flux cleaned = 0.00367317 Jy
! Total flux subtracted in 100 components = 0.00367317 Jy
! Clean residual min=-0.001945 max=0.002227 Jy/beam
! Clean residual mean=-0.000004 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.13889 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.13889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029493Jy  sigma=0.733935
! Fit after  self-cal, rms=0.029473Jy  sigma=0.732975
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=1.867 mas, bpa=-10.94 degrees
! Estimated noise=0.138247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217902 Jy
! Component: 100  -  total flux cleaned = 0.00352251 Jy
! Component: 150  -  total flux cleaned = 0.0039873 Jy
! Component: 200  -  total flux cleaned = 0.00408036 Jy
! Total flux subtracted in 200 components = 0.00408036 Jy
! Clean residual min=-0.001934 max=0.001944 Jy/beam
! Clean residual mean=-0.000003 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.14297 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.14297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029269Jy  sigma=0.725841
! Fit after  self-cal, rms=0.029256Jy  sigma=0.725256
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.024 x 1.867 at -10.94 degrees (North through East)
! Clean map  min=-0.0018476  max=0.12066 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.03     KP        1.07     
!   LA        0.97     MK        0.99     NL        1.06     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.03     KP        1.07     
!   LA        0.97     MK        0.99     NL        1.06     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.03     KP        1.07     
!   LA        0.98     MK        1.00     NL        1.07     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.01     KP        1.06     
!   LA        0.96     MK        0.99     NL        1.07     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.96     MK        0.98     NL        1.06     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.01     KP        1.06     
!   LA        0.97     MK        0.98     NL        1.04     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.02     KP        1.06     
!   LA        0.96     MK        0.99     NL        1.05     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.02     KP        1.05     
!   LA        0.95     MK        0.98     NL        1.05     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.029256Jy  sigma=0.725256
! Fit after  self-cal, rms=0.028333Jy  sigma=0.696245
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=1.87 mas, bpa=-10.79 degrees
! Estimated noise=0.138507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101124 Jy
! Component: 100  -  total flux cleaned = -0.00128733 Jy
! Component: 150  -  total flux cleaned = -0.00150445 Jy
! Component: 200  -  total flux cleaned = -0.00166687 Jy
! Total flux subtracted in 200 components = -0.00166687 Jy
! Clean residual min=-0.001065 max=0.001238 Jy/beam
! Clean residual mean=-0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.141304 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.141304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028290Jy  sigma=0.694478
! Fit after  self-cal, rms=0.028272Jy  sigma=0.694272
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028272Jy  sigma=0.694272
! Fit after  self-cal, rms=0.027985Jy  sigma=0.679431
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=1.865 mas, bpa=-10.65 degrees
! Estimated noise=0.138535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000818059 Jy
! Component: 100  -  total flux cleaned = -0.000963686 Jy
! Component: 150  -  total flux cleaned = -0.00107572 Jy
! Component: 200  -  total flux cleaned = -0.00108809 Jy
! Total flux subtracted in 200 components = -0.00108809 Jy
! Clean residual min=-0.000620 max=0.000809 Jy/beam
! Clean residual mean=-0.000001 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.140215 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.140215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027957Jy  sigma=0.678224
! Fit after  self-cal, rms=0.027956Jy  sigma=0.678155
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000553289 Jy
! Component: 100  -  total flux cleaned = 0.000540569 Jy
! Component: 150  -  total flux cleaned = 0.000515356 Jy
! Component: 200  -  total flux cleaned = 0.000504789 Jy
! Total flux subtracted in 200 components = 0.000504789 Jy
! Clean residual min=-0.000581 max=0.000630 Jy/beam
! Clean residual mean=-0.000001 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.14072 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.14072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027936Jy  sigma=0.677388
! Fit after  self-cal, rms=0.027934Jy  sigma=0.677325
! Inverting map 
! Added new window around map position (-2.8, 19).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000550862 Jy
! Component: 100  -  total flux cleaned = 0.00078653 Jy
! Component: 150  -  total flux cleaned = 0.0008953 Jy
! Component: 200  -  total flux cleaned = 0.000944093 Jy
! Total flux subtracted in 200 components = 0.000944093 Jy
! Clean residual min=-0.000557 max=0.000556 Jy/beam
! Clean residual mean=-0.000001 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.141664 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 100 components and 0.141664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027921Jy  sigma=0.676740
! Fit after  self-cal, rms=0.027921Jy  sigma=0.676716
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027921Jy  sigma=0.676716
! Fit after  self-cal, rms=0.027889Jy  sigma=0.676355
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=1.864 mas, bpa=-10.55 degrees
! Estimated noise=0.138482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000334276 Jy
! Component: 100  -  total flux cleaned = -0.00030159 Jy
! Component: 150  -  total flux cleaned = -0.000249508 Jy
! Component: 200  -  total flux cleaned = -0.00019395 Jy
! Total flux subtracted in 200 components = -0.00019395 Jy
! Clean residual min=-0.000544 max=0.000532 Jy/beam
! Clean residual mean=-0.000001 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.14147 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 106 components and 0.14147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027880Jy  sigma=0.675938
! Fit after  self-cal, rms=0.027879Jy  sigma=0.675923
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.94907e-06 Jy
! Component: 100  -  total flux cleaned = 3.49479e-05 Jy
! Component: 150  -  total flux cleaned = 5.71272e-05 Jy
! Component: 200  -  total flux cleaned = 6.41708e-05 Jy
! Total flux subtracted in 200 components = 6.41708e-05 Jy
! Clean residual min=-0.000538 max=0.000525 Jy/beam
! Clean residual mean=-0.000001 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.141535 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 113 components and 0.141535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027875Jy  sigma=0.675765
! Fit after  self-cal, rms=0.027875Jy  sigma=0.675759
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027875Jy  sigma=0.675759
! Fit after  self-cal, rms=0.027859Jy  sigma=0.675658
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.354 mas, bmaj=2.821 mas, bpa=-12.85 degrees
! Estimated noise=0.170858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116563 Jy
! Component: 100  -  total flux cleaned = -0.000102065 Jy
! Component: 150  -  total flux cleaned = -7.59787e-05 Jy
! Component: 200  -  total flux cleaned = -7.06776e-05 Jy
! Total flux subtracted in 200 components = -7.06776e-05 Jy
! Clean residual min=-0.000544 max=0.000613 Jy/beam
! Clean residual mean=-0.000001 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.141464 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 124 components and 0.141464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027857Jy  sigma=0.675542
! Fit after  self-cal, rms=0.027856Jy  sigma=0.675531
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.81864e-06 Jy
! Component: 100  -  total flux cleaned = 1.77441e-05 Jy
! Component: 150  -  total flux cleaned = 1.79786e-05 Jy
! Component: 200  -  total flux cleaned = 1.10331e-05 Jy
! Total flux subtracted in 200 components = 1.10331e-05 Jy
! Clean residual min=-0.000540 max=0.000608 Jy/beam
! Clean residual mean=-0.000001 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.141475 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 135 components and 0.141475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027856Jy  sigma=0.675505
! Fit after  self-cal, rms=0.027855Jy  sigma=0.675503
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=1.863 mas, bpa=-10.47 degrees
! Estimated noise=0.138443 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.024 x 1.863 at -10.47 degrees (North through East)
! Clean map  min=-0.00048324  max=0.12146 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7769 mas, bmaj=1.449 mas, bpa=-13.77 degrees
! Estimated noise=0.261751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0928708 Jy
! Component: 100  -  total flux cleaned = 0.115934 Jy
! Component: 150  -  total flux cleaned = 0.125594 Jy
! Component: 200  -  total flux cleaned = 0.130071 Jy
! Total flux subtracted in 200 components = 0.130071 Jy
! Clean residual min=-0.001216 max=0.002163 Jy/beam
! Clean residual mean=-0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.130071 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.130071 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=1.863 mas, bpa=-10.47 degrees
! Estimated noise=0.138443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376876 Jy
! Component: 100  -  total flux cleaned = 0.00591355 Jy
! Component: 150  -  total flux cleaned = 0.0072777 Jy
! Component: 200  -  total flux cleaned = 0.00818919 Jy
! Total flux subtracted in 200 components = 0.00818919 Jy
! Clean residual min=-0.000581 max=0.000613 Jy/beam
! Clean residual mean=-0.000001 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.138261 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 47 components and 0.138261 Jy
! Inverting map 
! Added new window around map position (27.8, -48.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000694017 Jy
! Component: 100  -  total flux cleaned = 0.00122782 Jy
! Component: 150  -  total flux cleaned = 0.00166555 Jy
! Component: 200  -  total flux cleaned = 0.00203149 Jy
! Total flux subtracted in 200 components = 0.00203149 Jy
! Clean residual min=-0.000534 max=0.000528 Jy/beam
! Clean residual mean=-0.000001 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.140292 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 74 components and 0.140292 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.354 mas, bmaj=2.821 mas, bpa=-12.85 degrees
! Estimated noise=0.170858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000413934 Jy
! Component: 100  -  total flux cleaned = 0.000698034 Jy
! Component: 150  -  total flux cleaned = 0.000871624 Jy
! Component: 200  -  total flux cleaned = 0.000944557 Jy
! Total flux subtracted in 200 components = 0.000944557 Jy
! Clean residual min=-0.000559 max=0.000578 Jy/beam
! Clean residual mean=-0.000001 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.141237 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.05464e-05 Jy
! Component: 100  -  total flux cleaned = 0.000126942 Jy
! Component: 150  -  total flux cleaned = 0.000177377 Jy
! Component: 200  -  total flux cleaned = 0.000200348 Jy
! Total flux subtracted in 200 components = 0.000200348 Jy
! Clean residual min=-0.000543 max=0.000577 Jy/beam
! Clean residual mean=-0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.141437 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 109 components and 0.141437 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=1.863 mas, bpa=-10.47 degrees
! Estimated noise=0.138443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126066 Jy
! Component: 100  -  total flux cleaned = -0.000146442 Jy
! Component: 150  -  total flux cleaned = -0.000146238 Jy
! Component: 200  -  total flux cleaned = -0.000146197 Jy
! Total flux subtracted in 200 components = -0.000146197 Jy
! Clean residual min=-0.000501 max=0.000512 Jy/beam
! Clean residual mean=-0.000001 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.141291 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 129 components and 0.141291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027852Jy  sigma=0.675466
! Fit after  self-cal, rms=0.027848Jy  sigma=0.675336
wmodel /J1631+4348_X_map.mod
! wmodel: Unable to open new model file: /J1631+4348_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1631+4348_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.024 x 1.863 at -10.47 degrees (North through East)
! Clean map  min=-0.00047952  max=0.12163 Jy/beam
! Writing clean map to FITS file: .//J1631+4348_X_map.fits
wmodel .//J1631+4348_X_map.mod
! Writing 129 model components to file: .//J1631+4348_X_map.mod
wobs   .//J1631+4348_X_uvs.fits
! Writing UV FITS file: .//J1631+4348_X_uvs.fits
wwins  .//J1631+4348_X_map.win
! wwins: Wrote 6 windows to .//J1631+4348_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.121628 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000117629 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.290138 0.290138 0.580276 1.16055 2.3211 4.6422 9.28441 18.5688 37.1376 74.2753
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.121 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1033.99 
quit
! Quitting program
! Log file .//J1631+4348_X_dfm.log closed on Wed Nov 16 12:02:10 2016