! Started logfile: .//J1628-0041_X_dfm.log on Wed Nov 16 12:01:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1628-0041_X_uvm.fits
! Reading UV FITS file: .//J1628-0041_X_uvm.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.920106 visibilities/baseline/integration-bin.
! Found source: J1628-0041
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 13912 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1628-0041_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001500Jy  sigma=30.959963
! Fit after  self-cal, rms=0.956611Jy  sigma=29.581375
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7543 mas, bmaj=1.936 mas, bpa=-3.738 degrees
! Estimated noise=0.308528 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0313432 Jy
! Component: 100  -  total flux cleaned = 0.041818 Jy
! Total flux subtracted in 100 components = 0.041818 Jy
! Clean residual min=-0.002162 max=0.004794 Jy/beam
! Clean residual mean=-0.000002 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.041818 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.041818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031772Jy  sigma=0.767957
! Fit after  self-cal, rms=0.031060Jy  sigma=0.741296
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055854 Jy
! Component: 100  -  total flux cleaned = 0.00832723 Jy
! Total flux subtracted in 100 components = 0.00832723 Jy
! Clean residual min=-0.001708 max=0.002138 Jy/beam
! Clean residual mean=-0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.0501452 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.0501452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029794Jy  sigma=0.694168
! Fit after  self-cal, rms=0.029776Jy  sigma=0.693464
! Inverting map 
! Added new window around map position (1, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205448 Jy
! Component: 100  -  total flux cleaned = 0.00316826 Jy
! Total flux subtracted in 100 components = 0.00316826 Jy
! Clean residual min=-0.001605 max=0.001545 Jy/beam
! Clean residual mean=-0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.0533134 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.0533134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029589Jy  sigma=0.686946
! Fit after  self-cal, rms=0.029577Jy  sigma=0.686358
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9421 mas, bmaj=2.291 mas, bpa=-1.951 degrees
! Estimated noise=0.199466 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122994 Jy
! Component: 100  -  total flux cleaned = 0.00191172 Jy
! Component: 150  -  total flux cleaned = 0.00236782 Jy
! Component: 200  -  total flux cleaned = 0.00264629 Jy
! Total flux subtracted in 200 components = 0.00264629 Jy
! Clean residual min=-0.001197 max=0.001051 Jy/beam
! Clean residual mean=-0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.0559597 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 38 components and 0.0559597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029509Jy  sigma=0.684498
! Fit after  self-cal, rms=0.029506Jy  sigma=0.684329
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9421 x 2.291 at -1.951 degrees (North through East)
! Clean map  min=-0.0011805  max=0.041589 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     HN        1.06     KP        1.05     
!   LA        0.93     MK        1.02     NL        1.08     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.94     HN        1.03     KP        1.10     
!   LA        0.97     MK        1.03     NL        1.02     OV        1.05     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        1.07     
!   LA        0.96     MK        1.03     NL        1.04     OV        0.98     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.91     HN        1.04     KP        1.09     
!   LA        0.94     MK        1.00     NL        0.98     OV        1.02     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        0.96     KP        1.04     
!   LA        1.00     MK        0.95     NL        1.05     OV        1.02     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.95     HN        1.05     KP        1.02     
!   LA        0.97     MK        0.95     NL        1.02     OV        1.03     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.02     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.04     OV        0.97     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.06     KP        1.06     
!   LA        0.94     MK        0.94     NL        1.03     OV        1.02     
!   PT        0.97     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.029506Jy  sigma=0.684329
! Fit after  self-cal, rms=0.029569Jy  sigma=0.679089
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9405 mas, bmaj=2.295 mas, bpa=-1.934 degrees
! Estimated noise=0.200112 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126381 Jy
! Component: 100  -  total flux cleaned = -0.000219397 Jy
! Component: 150  -  total flux cleaned = -0.000292502 Jy
! Component: 200  -  total flux cleaned = -0.000309643 Jy
! Total flux subtracted in 200 components = -0.000309643 Jy
! Clean residual min=-0.000692 max=0.000779 Jy/beam
! Clean residual mean=0.000001 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0556501 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.0556501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029558Jy  sigma=0.678736
! Fit after  self-cal, rms=0.029553Jy  sigma=0.678608
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029553Jy  sigma=0.678608
! Fit after  self-cal, rms=0.029481Jy  sigma=0.676217
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9397 mas, bmaj=2.296 mas, bpa=-1.902 degrees
! Estimated noise=0.2005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.62473e-05 Jy
! Component: 100  -  total flux cleaned = -0.000134127 Jy
! Component: 150  -  total flux cleaned = -0.000149382 Jy
! Component: 200  -  total flux cleaned = -0.00015597 Jy
! Total flux subtracted in 200 components = -0.00015597 Jy
! Clean residual min=-0.000655 max=0.000635 Jy/beam
! Clean residual mean=0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0554941 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.0554941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029474Jy  sigma=0.676015
! Fit after  self-cal, rms=0.029477Jy  sigma=0.675953
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.0279e-06 Jy
! Component: 100  -  total flux cleaned = -3.68376e-05 Jy
! Component: 150  -  total flux cleaned = -5.34665e-05 Jy
! Component: 200  -  total flux cleaned = -6.33642e-05 Jy
! Total flux subtracted in 200 components = -6.33642e-05 Jy
! Clean residual min=-0.000643 max=0.000641 Jy/beam
! Clean residual mean=0.000000 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0554308 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.0554308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029473Jy  sigma=0.675851
! Fit after  self-cal, rms=0.029473Jy  sigma=0.675820
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029473Jy  sigma=0.675820
! Fit after  self-cal, rms=0.029574Jy  sigma=0.675858
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9403 mas, bmaj=2.296 mas, bpa=-1.832 degrees
! Estimated noise=0.201183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.40657e-05 Jy
! Component: 100  -  total flux cleaned = 6.08558e-07 Jy
! Component: 150  -  total flux cleaned = -5.19166e-06 Jy
! Component: 200  -  total flux cleaned = -1.54475e-05 Jy
! Total flux subtracted in 200 components = -1.54475e-05 Jy
! Clean residual min=-0.000651 max=0.000654 Jy/beam
! Clean residual mean=0.000000 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0554153 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.0554153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029570Jy  sigma=0.675759
! Fit after  self-cal, rms=0.029571Jy  sigma=0.675731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.64372e-06 Jy
! Component: 100  -  total flux cleaned = -1.59346e-05 Jy
! Component: 150  -  total flux cleaned = -2.43869e-05 Jy
! Component: 200  -  total flux cleaned = -2.43611e-05 Jy
! Total flux subtracted in 200 components = -2.43611e-05 Jy
! Clean residual min=-0.000643 max=0.000661 Jy/beam
! Clean residual mean=0.000000 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.055391 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.055391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029569Jy  sigma=0.675671
! Fit after  self-cal, rms=0.029568Jy  sigma=0.675650
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029568Jy  sigma=0.675650
! Fit after  self-cal, rms=0.029660Jy  sigma=0.675619
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.56 mas, bpa=-3.558 degrees
! Estimated noise=0.252562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107509 Jy
! Component: 100  -  total flux cleaned = 0.000115577 Jy
! Component: 150  -  total flux cleaned = 0.000115632 Jy
! Component: 200  -  total flux cleaned = 0.000109364 Jy
! Total flux subtracted in 200 components = 0.000109364 Jy
! Clean residual min=-0.000635 max=0.000690 Jy/beam
! Clean residual mean=0.000001 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0555003 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.0555003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029658Jy  sigma=0.675603
! Fit after  self-cal, rms=0.029657Jy  sigma=0.675586
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.42186e-06 Jy
! Component: 100  -  total flux cleaned = -5.46966e-06 Jy
! Component: 150  -  total flux cleaned = -1.13044e-05 Jy
! Component: 200  -  total flux cleaned = -1.59925e-05 Jy
! Total flux subtracted in 200 components = -1.59925e-05 Jy
! Clean residual min=-0.000636 max=0.000691 Jy/beam
! Clean residual mean=0.000001 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0554843 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 68 components and 0.0554843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029656Jy  sigma=0.675566
! Fit after  self-cal, rms=0.029656Jy  sigma=0.675553
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9409 mas, bmaj=2.297 mas, bpa=-1.776 degrees
! Estimated noise=0.201832 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9409 x 2.297 at -1.776 degrees (North through East)
! Clean map  min=-0.00059644  max=0.04189 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7527 mas, bmaj=1.943 mas, bpa=-3.642 degrees
! Estimated noise=0.312953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0324085 Jy
! Component: 100  -  total flux cleaned = 0.0439653 Jy
! Component: 150  -  total flux cleaned = 0.0491638 Jy
! Component: 200  -  total flux cleaned = 0.0517514 Jy
! Total flux subtracted in 200 components = 0.0517514 Jy
! Clean residual min=-0.001312 max=0.001272 Jy/beam
! Clean residual mean=-0.000001 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0517514 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0517514 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9409 mas, bmaj=2.297 mas, bpa=-1.776 degrees
! Estimated noise=0.201832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176063 Jy
! Component: 100  -  total flux cleaned = 0.00267709 Jy
! Component: 150  -  total flux cleaned = 0.00319394 Jy
! Component: 200  -  total flux cleaned = 0.00331777 Jy
! Total flux subtracted in 200 components = 0.00331777 Jy
! Clean residual min=-0.000631 max=0.000678 Jy/beam
! Clean residual mean=0.000000 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.0550692 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 32 components and 0.0550692 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.56 mas, bpa=-3.558 degrees
! Estimated noise=0.252562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000297096 Jy
! Component: 100  -  total flux cleaned = 0.000334606 Jy
! Component: 150  -  total flux cleaned = 0.000357172 Jy
! Component: 200  -  total flux cleaned = 0.000375079 Jy
! Total flux subtracted in 200 components = 0.000375079 Jy
! Clean residual min=-0.000635 max=0.000706 Jy/beam
! Clean residual mean=0.000001 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0554443 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.10969e-05 Jy
! Component: 100  -  total flux cleaned = 1.76266e-05 Jy
! Component: 150  -  total flux cleaned = 1.78108e-05 Jy
! Component: 200  -  total flux cleaned = 1.79244e-05 Jy
! Total flux subtracted in 200 components = 1.79244e-05 Jy
! Clean residual min=-0.000635 max=0.000700 Jy/beam
! Clean residual mean=0.000001 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0554622 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 44 components and 0.0554622 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9409 mas, bmaj=2.297 mas, bpa=-1.776 degrees
! Estimated noise=0.201832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.36893e-05 Jy
! Component: 100  -  total flux cleaned = -0.000132336 Jy
! Component: 150  -  total flux cleaned = -0.000144241 Jy
! Component: 200  -  total flux cleaned = -0.000149512 Jy
! Total flux subtracted in 200 components = -0.000149512 Jy
! Clean residual min=-0.000659 max=0.000672 Jy/beam
! Clean residual mean=0.000000 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.0553127 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.0553127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029658Jy  sigma=0.675584
! Fit after  self-cal, rms=0.029659Jy  sigma=0.675547
wmodel /J1628-0041_X_map.mod
! wmodel: Unable to open new model file: /J1628-0041_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1628-0041_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9409 x 2.297 at -1.776 degrees (North through East)
! Clean map  min=-0.00060914  max=0.041917 Jy/beam
! Writing clean map to FITS file: .//J1628-0041_X_map.fits
wmodel .//J1628-0041_X_map.mod
! Writing 54 model components to file: .//J1628-0041_X_map.mod
wobs   .//J1628-0041_X_uvs.fits
! Writing UV FITS file: .//J1628-0041_X_uvs.fits
wwins  .//J1628-0041_X_map.win
! wwins: Wrote 2 windows to .//J1628-0041_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0419171 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000156327 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.11883 1.11883 2.23765 4.47531 8.95062 17.9012 35.8025 71.6049
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  268.137 
quit
! Quitting program
! Log file .//J1628-0041_X_dfm.log closed on Wed Nov 16 12:02:01 2016