! Started logfile: .//J1550+0527_X_dfm.log on Wed Nov 16 12:00:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1550+0527_X_uvm.fits
! Reading UV FITS file: .//J1550+0527_X_uvm.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.750519 visibilities/baseline/integration-bin.
! Found source: J1550+0527
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 20264 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1550+0527_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.581026Jy  sigma=51.300977
! Fit after  self-cal, rms=0.526329Jy  sigma=16.485203
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7398 mas, bmaj=2.123 mas, bpa=-6.988 degrees
! Estimated noise=0.275634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.787165 Jy
! Component: 100  -  total flux cleaned = 1.09049 Jy
! Total flux subtracted in 100 components = 1.09049 Jy
! Clean residual min=-0.075426 max=0.148645 Jy/beam
! Clean residual mean=0.000042 rms=0.018787 Jy/beam
! Combined flux in latest and established models = 1.09049 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 1.09049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.422537Jy  sigma=13.409728
! Fit after  self-cal, rms=0.421320Jy  sigma=13.377780
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.176296 Jy
! Component: 100  -  total flux cleaned = 0.283205 Jy
! Total flux subtracted in 100 components = 0.283205 Jy
! Clean residual min=-0.048920 max=0.104049 Jy/beam
! Clean residual mean=0.000030 rms=0.012263 Jy/beam
! Combined flux in latest and established models = 1.3737 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 1.3737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.281046Jy  sigma=8.834063
! Fit after  self-cal, rms=0.279829Jy  sigma=8.796409
! Inverting map 
! Added new window around map position (1, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103852 Jy
! Component: 100  -  total flux cleaned = 0.171282 Jy
! Total flux subtracted in 100 components = 0.171282 Jy
! Clean residual min=-0.036753 max=0.039262 Jy/beam
! Clean residual mean=0.000022 rms=0.008286 Jy/beam
! Combined flux in latest and established models = 1.54498 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 30 components and 1.54498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.208458Jy  sigma=6.466873
! Fit after  self-cal, rms=0.206498Jy  sigma=6.394200
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.918 mas, bmaj=2.487 mas, bpa=-7.727 degrees
! Estimated noise=0.155773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0888233 Jy
! Component: 100  -  total flux cleaned = 0.145988 Jy
! Component: 150  -  total flux cleaned = 0.18504 Jy
! Component: 200  -  total flux cleaned = 0.212401 Jy
! Total flux subtracted in 200 components = 0.212401 Jy
! Clean residual min=-0.022155 max=0.026160 Jy/beam
! Clean residual mean=0.000045 rms=0.006412 Jy/beam
! Combined flux in latest and established models = 1.75738 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 60 components and 1.75738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.153491Jy  sigma=4.811363
! Fit after  self-cal, rms=0.152518Jy  sigma=4.776328
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.918 x 2.487 at -7.727 degrees (North through East)
! Clean map  min=-0.021036  max=1.0817 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.97     KP        1.06     
!   LA        0.96     MK        0.98     NL        1.00     OV        0.97     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        0.97     KP        1.05     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.96     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.96     KP        1.05     
!   LA        0.96     MK        0.99     NL        1.00     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.98     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.01     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        0.98     KP        1.06     
!   LA        0.96     MK        1.01     NL        1.02     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        0.98     KP        1.05     
!   LA        0.96     MK        1.03     NL        1.02     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        1.01     KP        1.05     
!   LA        0.96     MK        1.04     NL        1.02     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.01     KP        1.05     
!   LA        0.97     MK        1.05     NL        1.02     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.152518Jy  sigma=4.776328
! Fit after  self-cal, rms=0.136599Jy  sigma=4.385429
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=2.502 mas, bpa=-7.629 degrees
! Estimated noise=0.154872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139393 Jy
! Component: 100  -  total flux cleaned = 0.0170178 Jy
! Component: 150  -  total flux cleaned = 0.0176477 Jy
! Component: 200  -  total flux cleaned = 0.0181829 Jy
! Total flux subtracted in 200 components = 0.0181829 Jy
! Clean residual min=-0.016320 max=0.017928 Jy/beam
! Clean residual mean=0.000026 rms=0.003979 Jy/beam
! Combined flux in latest and established models = 1.77556 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 1.77556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.134815Jy  sigma=4.346463
! Fit after  self-cal, rms=0.134629Jy  sigma=4.339080
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.134629Jy  sigma=4.339080
! Fit after  self-cal, rms=0.101911Jy  sigma=3.358585
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9202 mas, bmaj=2.507 mas, bpa=-7.77 degrees
! Estimated noise=0.148929 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0375344 Jy
! Component: 100  -  total flux cleaned = -0.0512232 Jy
! Component: 150  -  total flux cleaned = -0.0595425 Jy
! Component: 200  -  total flux cleaned = -0.0637451 Jy
! Total flux subtracted in 200 components = -0.0637451 Jy
! Clean residual min=-0.011927 max=0.013345 Jy/beam
! Clean residual mean=0.000011 rms=0.003091 Jy/beam
! Combined flux in latest and established models = 1.71182 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 85 components and 1.71182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088191Jy  sigma=2.898592
! Fit after  self-cal, rms=0.087941Jy  sigma=2.888576
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00355551 Jy
! Component: 100  -  total flux cleaned = -0.00409578 Jy
! Component: 150  -  total flux cleaned = -0.00425297 Jy
! Component: 200  -  total flux cleaned = -0.00425098 Jy
! Total flux subtracted in 200 components = -0.00425098 Jy
! Clean residual min=-0.011265 max=0.012926 Jy/beam
! Clean residual mean=0.000012 rms=0.002989 Jy/beam
! Combined flux in latest and established models = 1.70757 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 89 components and 1.70757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087208Jy  sigma=2.867165
! Fit after  self-cal, rms=0.087088Jy  sigma=2.862205
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087088Jy  sigma=2.862205
! Fit after  self-cal, rms=0.077369Jy  sigma=2.523158
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9191 mas, bmaj=2.506 mas, bpa=-7.773 degrees
! Estimated noise=0.144885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0248186 Jy
! Component: 100  -  total flux cleaned = -0.0344965 Jy
! Component: 150  -  total flux cleaned = -0.0404041 Jy
! Component: 200  -  total flux cleaned = -0.0430131 Jy
! Total flux subtracted in 200 components = -0.0430131 Jy
! Clean residual min=-0.009985 max=0.011480 Jy/beam
! Clean residual mean=0.000009 rms=0.002701 Jy/beam
! Combined flux in latest and established models = 1.66455 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 89 components and 1.66455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068908Jy  sigma=2.256992
! Fit after  self-cal, rms=0.068793Jy  sigma=2.251492
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00186954 Jy
! Component: 100  -  total flux cleaned = -0.002131 Jy
! Component: 150  -  total flux cleaned = -0.00201191 Jy
! Component: 200  -  total flux cleaned = -0.0020107 Jy
! Total flux subtracted in 200 components = -0.0020107 Jy
! Clean residual min=-0.009727 max=0.011403 Jy/beam
! Clean residual mean=0.000009 rms=0.002636 Jy/beam
! Combined flux in latest and established models = 1.66254 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 90 components and 1.66254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068230Jy  sigma=2.235586
! Fit after  self-cal, rms=0.068150Jy  sigma=2.231689
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068150Jy  sigma=2.231689
! Fit after  self-cal, rms=0.062601Jy  sigma=2.027170
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.154 mas, bmaj=3.607 mas, bpa=-4.674 degrees
! Estimated noise=0.17489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.019092 Jy
! Component: 100  -  total flux cleaned = -0.0260997 Jy
! Component: 150  -  total flux cleaned = -0.0284542 Jy
! Component: 200  -  total flux cleaned = -0.0292773 Jy
! Total flux subtracted in 200 components = -0.0292773 Jy
! Clean residual min=-0.013369 max=0.015610 Jy/beam
! Clean residual mean=0.000015 rms=0.004170 Jy/beam
! Combined flux in latest and established models = 1.63327 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 96 components and 1.63327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058132Jy  sigma=1.891425
! Fit after  self-cal, rms=0.057985Jy  sigma=1.884692
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00221778 Jy
! Component: 100  -  total flux cleaned = -0.00182925 Jy
! Component: 150  -  total flux cleaned = -0.00175619 Jy
! Component: 200  -  total flux cleaned = -0.00169033 Jy
! Total flux subtracted in 200 components = -0.00169033 Jy
! Clean residual min=-0.013108 max=0.015464 Jy/beam
! Clean residual mean=0.000015 rms=0.004127 Jy/beam
! Combined flux in latest and established models = 1.63158 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 103 components and 1.63158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058032Jy  sigma=1.888455
! Fit after  self-cal, rms=0.057976Jy  sigma=1.885446
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9183 mas, bmaj=2.503 mas, bpa=-7.728 degrees
! Estimated noise=0.142079 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9183 x 2.503 at -7.728 degrees (North through East)
! Clean map  min=-0.0085155  max=0.98878 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057976Jy  sigma=1.885446
! Fit after  self-cal, rms=0.051063Jy  sigma=1.648852
! Inverting map and beam 
! Estimated beam: bmin=0.9187 mas, bmaj=2.497 mas, bpa=-7.577 degrees
! Estimated noise=0.140648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0100482 Jy
! Component: 100  -  total flux cleaned = -0.0118771 Jy
! Component: 150  -  total flux cleaned = -0.0125351 Jy
! Component: 200  -  total flux cleaned = -0.0130465 Jy
! Total flux subtracted in 200 components = -0.0130465 Jy
! Clean residual min=-0.008482 max=0.009688 Jy/beam
! Clean residual mean=0.000007 rms=0.002190 Jy/beam
! Combined flux in latest and established models = 1.61853 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 108 components and 1.61853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048453Jy  sigma=1.569312
! Fit after  self-cal, rms=0.048415Jy  sigma=1.566702
! Inverting map 
! Added new window around map position (3.6, 9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00942688 Jy
! Component: 100  -  total flux cleaned = 0.0150033 Jy
! Component: 150  -  total flux cleaned = 0.0165279 Jy
! Component: 200  -  total flux cleaned = 0.0175754 Jy
! Total flux subtracted in 200 components = 0.0175754 Jy
! Clean residual min=-0.007292 max=0.009529 Jy/beam
! Clean residual mean=0.000006 rms=0.001832 Jy/beam
! Combined flux in latest and established models = 1.6361 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 136 components and 1.6361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046192Jy  sigma=1.478978
! Fit after  self-cal, rms=0.046124Jy  sigma=1.476884
! Inverting map 
! Added new window around map position (0, 9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00874195 Jy
! Component: 100  -  total flux cleaned = 0.0135098 Jy
! Component: 150  -  total flux cleaned = 0.0164116 Jy
! Component: 200  -  total flux cleaned = 0.0186376 Jy
! Total flux subtracted in 200 components = 0.0186376 Jy
! Clean residual min=-0.006407 max=0.006450 Jy/beam
! Clean residual mean=0.000001 rms=0.001500 Jy/beam
! Combined flux in latest and established models = 1.65474 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 167 components and 1.65474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044151Jy  sigma=1.398126
! Fit after  self-cal, rms=0.044084Jy  sigma=1.395977
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044084Jy  sigma=1.395977
! Fit after  self-cal, rms=0.041563Jy  sigma=1.303986
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7432 mas, bmaj=2.129 mas, bpa=-6.759 degrees
! Estimated noise=0.245989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.700193 Jy
! Component: 100  -  total flux cleaned = 0.975524 Jy
! Component: 150  -  total flux cleaned = 1.13952 Jy
! Component: 200  -  total flux cleaned = 1.25277 Jy
! Total flux subtracted in 200 components = 1.25277 Jy
! Clean residual min=-0.041656 max=0.062608 Jy/beam
! Clean residual mean=0.000017 rms=0.008861 Jy/beam
! Combined flux in latest and established models = 1.25277 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 1.25277 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9178 mas, bmaj=2.494 mas, bpa=-7.551 degrees
! Estimated noise=0.139416 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127929 Jy
! Component: 100  -  total flux cleaned = 0.205437 Jy
! Component: 150  -  total flux cleaned = 0.255347 Jy
! Component: 200  -  total flux cleaned = 0.288068 Jy
! Total flux subtracted in 200 components = 0.288068 Jy
! Clean residual min=-0.011599 max=0.019223 Jy/beam
! Clean residual mean=0.000019 rms=0.003707 Jy/beam
! Combined flux in latest and established models = 1.54084 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 51 components and 1.54084 Jy
! Inverting map 
! Added new window around map position (0, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223987 Jy
! Component: 100  -  total flux cleaned = 0.0376245 Jy
! Component: 150  -  total flux cleaned = 0.0491071 Jy
! Component: 200  -  total flux cleaned = 0.0584842 Jy
! Total flux subtracted in 200 components = 0.0584842 Jy
! Clean residual min=-0.008073 max=0.009375 Jy/beam
! Clean residual mean=0.000008 rms=0.002043 Jy/beam
! Combined flux in latest and established models = 1.59933 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 72 components and 1.59933 Jy
! Inverting map 
! Added new window around map position (-2.8, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00929753 Jy
! Component: 100  -  total flux cleaned = 0.0164992 Jy
! Component: 150  -  total flux cleaned = 0.0227667 Jy
! Component: 200  -  total flux cleaned = 0.0282575 Jy
! Total flux subtracted in 200 components = 0.0282575 Jy
! Clean residual min=-0.006816 max=0.006617 Jy/beam
! Clean residual mean=0.000006 rms=0.001530 Jy/beam
! Combined flux in latest and established models = 1.62758 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 97 components and 1.62758 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.151 mas, bmaj=3.601 mas, bpa=-4.543 degrees
! Estimated noise=0.171948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00705195 Jy
! Component: 100  -  total flux cleaned = 0.0124822 Jy
! Component: 150  -  total flux cleaned = 0.0168797 Jy
! Component: 200  -  total flux cleaned = 0.0205221 Jy
! Total flux subtracted in 200 components = 0.0205221 Jy
! Clean residual min=-0.006844 max=0.007177 Jy/beam
! Clean residual mean=0.000008 rms=0.001998 Jy/beam
! Combined flux in latest and established models = 1.64811 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202089 Jy
! Component: 100  -  total flux cleaned = 0.00304027 Jy
! Component: 150  -  total flux cleaned = 0.00398232 Jy
! Component: 200  -  total flux cleaned = 0.00456496 Jy
! Total flux subtracted in 200 components = 0.00456496 Jy
! Clean residual min=-0.006609 max=0.006343 Jy/beam
! Clean residual mean=0.000007 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 1.65267 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 156 components and 1.65267 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9178 mas, bmaj=2.494 mas, bpa=-7.551 degrees
! Estimated noise=0.139416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302538 Jy
! Component: 100  -  total flux cleaned = 0.00101696 Jy
! Component: 150  -  total flux cleaned = 0.00114214 Jy
! Component: 200  -  total flux cleaned = 0.00149304 Jy
! Total flux subtracted in 200 components = 0.00149304 Jy
! Clean residual min=-0.005751 max=0.005472 Jy/beam
! Clean residual mean=0.000003 rms=0.001208 Jy/beam
! Combined flux in latest and established models = 1.65416 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 174 components and 1.65416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039060Jy  sigma=1.228026
! Fit after  self-cal, rms=0.038861Jy  sigma=1.218984
wmodel /J1550+0527_X_map.mod
! wmodel: Unable to open new model file: /J1550+0527_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1550+0527_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9178 x 2.494 at -7.551 degrees (North through East)
! Clean map  min=-0.005716  max=0.95699 Jy/beam
! Writing clean map to FITS file: .//J1550+0527_X_map.fits
wmodel .//J1550+0527_X_map.mod
! Writing 174 model components to file: .//J1550+0527_X_map.mod
wobs   .//J1550+0527_X_uvs.fits
! Writing UV FITS file: .//J1550+0527_X_uvs.fits
wwins  .//J1550+0527_X_map.win
! wwins: Wrote 6 windows to .//J1550+0527_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.956989 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00118427 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.371249 0.371249 0.742498 1.485 2.96999 5.93998 11.88 23.7599 47.5199 95.0397
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0035 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.956 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  808.083 
quit
! Quitting program
! Log file .//J1550+0527_X_dfm.log closed on Wed Nov 16 12:00:45 2016