! Started logfile: .//J1540+1447_X_dfm.log on Wed Nov 16 12:00:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1540+1447_X_uvm.fits
! Reading UV FITS file: .//J1540+1447_X_uvm.fits
! AN table 1: 20 integrations on 45 of 45 possible baselines.
! AN table 2: 18 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.93863 visibilities/baseline/integration-bin.
! Found source: J1540+1447
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 11624 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1540+1447_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.183939Jy  sigma=36.972445
! Fit after  self-cal, rms=0.419199Jy  sigma=13.019213
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7375 mas, bmaj=1.895 mas, bpa=-0.8905 degrees
! Estimated noise=0.319254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.440388 Jy
! Component: 100  -  total flux cleaned = 0.557313 Jy
! Total flux subtracted in 100 components = 0.557313 Jy
! Clean residual min=-0.016034 max=0.046685 Jy/beam
! Clean residual mean=-0.000009 rms=0.003840 Jy/beam
! Combined flux in latest and established models = 0.557313 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.557313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088386Jy  sigma=2.640550
! Fit after  self-cal, rms=0.088215Jy  sigma=2.635856
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0473593 Jy
! Component: 100  -  total flux cleaned = 0.0679587 Jy
! Total flux subtracted in 100 components = 0.0679587 Jy
! Clean residual min=-0.009341 max=0.012657 Jy/beam
! Clean residual mean=-0.000009 rms=0.002019 Jy/beam
! Combined flux in latest and established models = 0.625271 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.625271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052699Jy  sigma=1.550259
! Fit after  self-cal, rms=0.052553Jy  sigma=1.546199
! Inverting map 
! Added new window around map position (-5.2, 10.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122928 Jy
! Component: 100  -  total flux cleaned = 0.0193525 Jy
! Total flux subtracted in 100 components = 0.0193525 Jy
! Clean residual min=-0.008556 max=0.009775 Jy/beam
! Clean residual mean=-0.000009 rms=0.001803 Jy/beam
! Combined flux in latest and established models = 0.644624 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.644624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048352Jy  sigma=1.437752
! Fit after  self-cal, rms=0.048179Jy  sigma=1.432863
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9189 mas, bmaj=2.19 mas, bpa=-2.307 degrees
! Estimated noise=0.21517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0091375 Jy
! Component: 100  -  total flux cleaned = 0.0151544 Jy
! Component: 150  -  total flux cleaned = 0.0176254 Jy
! Component: 200  -  total flux cleaned = 0.0195273 Jy
! Total flux subtracted in 200 components = 0.0195273 Jy
! Clean residual min=-0.009729 max=0.011082 Jy/beam
! Clean residual mean=-0.000035 rms=0.002450 Jy/beam
! Combined flux in latest and established models = 0.664151 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 32 components and 0.664151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045623Jy  sigma=1.368491
! Fit after  self-cal, rms=0.045557Jy  sigma=1.366961
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9189 x 2.19 at -2.307 degrees (North through East)
! Clean map  min=-0.0090789  max=0.5799 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.02     KP        1.03     
!   LA        0.94     MK        0.96     NL        1.06     OV        0.99     
!   PT        0.95     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        1.03     KP        1.05     LA        0.94     
!   MK        1.01     NL        1.06     OV        1.01     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.94     HN        1.01     KP        1.02     
!   LA        0.94     MK        0.97     NL        1.07     OV        1.00     
!   PT        0.95     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        1.03     KP        1.05     LA        0.94     
!   MK        1.01     NL        1.06     OV        1.00     PT        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.02     KP        1.02     
!   LA        0.94     MK        0.96     NL        1.06     OV        0.99     
!   PT        0.95     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     HN        1.02     KP        1.05     LA        0.93     
!   MK        1.01     NL        1.06     OV        1.01     PT        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.01     KP        1.02     
!   LA        0.94     MK        0.98     NL        1.06     OV        1.00     
!   PT        0.95     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     HN        1.02     KP        1.05     LA        0.93     
!   MK        1.01     NL        1.06     OV        1.01     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.00     KP        1.02     
!   LA        0.94     MK        0.99     NL        1.06     OV        1.00     
!   PT        0.95     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     HN        1.01     KP        1.04     LA        0.93     
!   MK        1.01     NL        1.05     OV        1.01     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.03     KP        1.02     
!   LA        0.94     MK        1.00     NL        1.05     OV        1.00     
!   PT        0.95     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        1.01     KP        1.05     LA        0.92     
!   MK        1.02     NL        1.05     OV        1.01     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.03     KP        1.02     
!   LA        0.94     MK        1.01     NL        1.07     OV        1.01     
!   PT        0.96     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     HN        1.01     KP        1.04     LA        0.93     
!   MK        1.02     NL        1.05     OV        1.01     PT        0.94     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.03     KP        1.03     
!   LA        0.95     MK        0.98     NL        1.07     OV        1.00     
!   PT        0.96     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        1.02     KP        1.04     LA        0.93     
!   MK        1.00     NL        1.06     OV        1.00     PT        0.93     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.045557Jy  sigma=1.366961
! Fit after  self-cal, rms=0.031030Jy  sigma=0.879936
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9183 mas, bmaj=2.196 mas, bpa=-2.183 degrees
! Estimated noise=0.214544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.005886 Jy
! Component: 100  -  total flux cleaned = 0.00659227 Jy
! Component: 150  -  total flux cleaned = 0.00712476 Jy
! Component: 200  -  total flux cleaned = 0.00733925 Jy
! Total flux subtracted in 200 components = 0.00733925 Jy
! Clean residual min=-0.003451 max=0.005437 Jy/beam
! Clean residual mean=-0.000008 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.67149 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 50 components and 0.67149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029007Jy  sigma=0.805924
! Fit after  self-cal, rms=0.028917Jy  sigma=0.803060
! Inverting map 
! Added new window around map position (-4.6, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00517105 Jy
! Component: 100  -  total flux cleaned = 0.00714388 Jy
! Component: 150  -  total flux cleaned = 0.0077199 Jy
! Component: 200  -  total flux cleaned = 0.00820869 Jy
! Total flux subtracted in 200 components = 0.00820869 Jy
! Clean residual min=-0.002676 max=0.003951 Jy/beam
! Clean residual mean=-0.000007 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.679699 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 76 components and 0.679699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027813Jy  sigma=0.765606
! Fit after  self-cal, rms=0.027785Jy  sigma=0.764420
! Inverting map 
! Added new window around map position (-0.2, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00339971 Jy
! Component: 100  -  total flux cleaned = 0.00481625 Jy
! Component: 150  -  total flux cleaned = 0.0058061 Jy
! Component: 200  -  total flux cleaned = 0.00637031 Jy
! Total flux subtracted in 200 components = 0.00637031 Jy
! Clean residual min=-0.002194 max=0.002630 Jy/beam
! Clean residual mean=-0.000006 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.686069 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 96 components and 0.686069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027243Jy  sigma=0.745363
! Fit after  self-cal, rms=0.027232Jy  sigma=0.744923
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027232Jy  sigma=0.744923
! Fit after  self-cal, rms=0.026824Jy  sigma=0.733672
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9178 mas, bmaj=2.195 mas, bpa=-2.18 degrees
! Estimated noise=0.214177 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124497 Jy
! Component: 100  -  total flux cleaned = 0.00213983 Jy
! Component: 150  -  total flux cleaned = 0.00247516 Jy
! Component: 200  -  total flux cleaned = 0.00282303 Jy
! Total flux subtracted in 200 components = 0.00282303 Jy
! Clean residual min=-0.001771 max=0.002462 Jy/beam
! Clean residual mean=-0.000005 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.688892 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 117 components and 0.688893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026524Jy  sigma=0.723102
! Fit after  self-cal, rms=0.026518Jy  sigma=0.722764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225643 Jy
! Component: 100  -  total flux cleaned = 0.00287398 Jy
! Component: 150  -  total flux cleaned = 0.00301516 Jy
! Component: 200  -  total flux cleaned = 0.00309867 Jy
! Total flux subtracted in 200 components = 0.00309867 Jy
! Clean residual min=-0.001588 max=0.001870 Jy/beam
! Clean residual mean=-0.000004 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.691991 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 131 components and 0.691991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026259Jy  sigma=0.714614
! Fit after  self-cal, rms=0.026250Jy  sigma=0.714391
! Inverting map 
! Added new window around map position (-24, 28.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001919 Jy
! Component: 100  -  total flux cleaned = 0.00311168 Jy
! Component: 150  -  total flux cleaned = 0.00358486 Jy
! Component: 200  -  total flux cleaned = 0.00380188 Jy
! Total flux subtracted in 200 components = 0.00380188 Jy
! Clean residual min=-0.001417 max=0.001348 Jy/beam
! Clean residual mean=-0.000004 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.695793 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 155 components and 0.695793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026062Jy  sigma=0.708291
! Fit after  self-cal, rms=0.026061Jy  sigma=0.708193
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026061Jy  sigma=0.708193
! Fit after  self-cal, rms=0.025974Jy  sigma=0.706534
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9179 mas, bmaj=2.194 mas, bpa=-2.173 degrees
! Estimated noise=0.213984 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.7067e-05 Jy
! Component: 100  -  total flux cleaned = 0.000424291 Jy
! Component: 150  -  total flux cleaned = 0.000814067 Jy
! Component: 200  -  total flux cleaned = 0.00104828 Jy
! Total flux subtracted in 200 components = 0.00104828 Jy
! Clean residual min=-0.001268 max=0.001245 Jy/beam
! Clean residual mean=-0.000003 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.696841 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 168 components and 0.696841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025887Jy  sigma=0.703433
! Fit after  self-cal, rms=0.025887Jy  sigma=0.703365
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013291 Jy
! Component: 100  -  total flux cleaned = 0.000291217 Jy
! Component: 150  -  total flux cleaned = 0.000466148 Jy
! Component: 200  -  total flux cleaned = 0.000608583 Jy
! Total flux subtracted in 200 components = 0.000608583 Jy
! Clean residual min=-0.001248 max=0.001208 Jy/beam
! Clean residual mean=-0.000003 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.69745 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 183 components and 0.69745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025843Jy  sigma=0.701827
! Fit after  self-cal, rms=0.025843Jy  sigma=0.701791
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025843Jy  sigma=0.701791
! Fit after  self-cal, rms=0.025814Jy  sigma=0.701379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.003 mas, bmaj=3.137 mas, bpa=-3.905 degrees
! Estimated noise=0.271068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000369351 Jy
! Component: 100  -  total flux cleaned = 0.00069247 Jy
! Component: 150  -  total flux cleaned = 0.00104048 Jy
! Component: 200  -  total flux cleaned = 0.00130976 Jy
! Total flux subtracted in 200 components = 0.00130976 Jy
! Clean residual min=-0.001581 max=0.001347 Jy/beam
! Clean residual mean=-0.000006 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.69876 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 207 components and 0.69876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025777Jy  sigma=0.699936
! Fit after  self-cal, rms=0.025776Jy  sigma=0.699854
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.48198e-05 Jy
! Component: 100  -  total flux cleaned = 0.000165891 Jy
! Component: 150  -  total flux cleaned = 0.00029674 Jy
! Component: 200  -  total flux cleaned = 0.000401418 Jy
! Total flux subtracted in 200 components = 0.000401418 Jy
! Clean residual min=-0.001531 max=0.001393 Jy/beam
! Clean residual mean=-0.000006 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.699161 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 221 components and 0.699161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025766Jy  sigma=0.699484
! Fit after  self-cal, rms=0.025766Jy  sigma=0.699453
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.918 mas, bmaj=2.194 mas, bpa=-2.163 degrees
! Estimated noise=0.213881 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.918 x 2.194 at -2.163 degrees (North through East)
! Clean map  min=-0.0014856  max=0.57796 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025766Jy  sigma=0.699453
! Fit after  self-cal, rms=0.023878Jy  sigma=0.642372
! Inverting map and beam 
! Estimated beam: bmin=0.918 mas, bmaj=2.194 mas, bpa=-2.163 degrees
! Estimated noise=0.213731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000304801 Jy
! Component: 100  -  total flux cleaned = -0.000411081 Jy
! Component: 150  -  total flux cleaned = -0.00043071 Jy
! Component: 200  -  total flux cleaned = -0.000484503 Jy
! Total flux subtracted in 200 components = -0.000484503 Jy
! Clean residual min=-0.001121 max=0.000999 Jy/beam
! Clean residual mean=-0.000002 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.698677 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 245 components and 0.698677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023847Jy  sigma=0.641260
! Fit after  self-cal, rms=0.023847Jy  sigma=0.641234
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.84202e-05 Jy
! Component: 100  -  total flux cleaned = -3.86542e-05 Jy
! Component: 150  -  total flux cleaned = -2.20709e-05 Jy
! Component: 200  -  total flux cleaned = -6.25111e-06 Jy
! Total flux subtracted in 200 components = -6.25111e-06 Jy
! Clean residual min=-0.001089 max=0.000987 Jy/beam
! Clean residual mean=-0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.69867 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 259 components and 0.698671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023827Jy  sigma=0.640560
! Fit after  self-cal, rms=0.023827Jy  sigma=0.640545
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023827Jy  sigma=0.640545
! Fit after  self-cal, rms=0.023822Jy  sigma=0.640449
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7351 mas, bmaj=1.896 mas, bpa=-0.7726 degrees
! Estimated noise=0.31731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.437576 Jy
! Component: 100  -  total flux cleaned = 0.555969 Jy
! Component: 150  -  total flux cleaned = 0.603804 Jy
! Component: 200  -  total flux cleaned = 0.625017 Jy
! Total flux subtracted in 200 components = 0.625017 Jy
! Clean residual min=-0.004717 max=0.009992 Jy/beam
! Clean residual mean=-0.000000 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.625017 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.625017 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9181 mas, bmaj=2.195 mas, bpa=-2.162 degrees
! Estimated noise=0.213707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144739 Jy
! Component: 100  -  total flux cleaned = 0.0230233 Jy
! Component: 150  -  total flux cleaned = 0.0293954 Jy
! Component: 200  -  total flux cleaned = 0.0344366 Jy
! Total flux subtracted in 200 components = 0.0344366 Jy
! Clean residual min=-0.002396 max=0.003654 Jy/beam
! Clean residual mean=-0.000007 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.659454 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 35 components and 0.659454 Jy
! Inverting map 
! Added new window around map position (-2.8, 6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428739 Jy
! Component: 100  -  total flux cleaned = 0.00783085 Jy
! Component: 150  -  total flux cleaned = 0.0108808 Jy
! Component: 200  -  total flux cleaned = 0.013541 Jy
! Total flux subtracted in 200 components = 0.013541 Jy
! Clean residual min=-0.001812 max=0.002167 Jy/beam
! Clean residual mean=-0.000006 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.672995 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 68 components and 0.672995 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.003 mas, bmaj=3.138 mas, bpa=-3.914 degrees
! Estimated noise=0.270785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412718 Jy
! Component: 100  -  total flux cleaned = 0.00727026 Jy
! Component: 150  -  total flux cleaned = 0.00985779 Jy
! Component: 200  -  total flux cleaned = 0.0120333 Jy
! Total flux subtracted in 200 components = 0.0120333 Jy
! Clean residual min=-0.001992 max=0.002097 Jy/beam
! Clean residual mean=-0.000009 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.685028 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018447 Jy
! Component: 100  -  total flux cleaned = 0.00342855 Jy
! Component: 150  -  total flux cleaned = 0.00480217 Jy
! Component: 200  -  total flux cleaned = 0.00600748 Jy
! Total flux subtracted in 200 components = 0.00600748 Jy
! Clean residual min=-0.001668 max=0.001623 Jy/beam
! Clean residual mean=-0.000007 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.691036 Jy
! Adding 127 model components to the UV plane model.
! The established model now contains 184 components and 0.691036 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9181 mas, bmaj=2.195 mas, bpa=-2.162 degrees
! Estimated noise=0.213707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119674 Jy
! Component: 100  -  total flux cleaned = 0.00179469 Jy
! Component: 150  -  total flux cleaned = 0.00224132 Jy
! Component: 200  -  total flux cleaned = 0.00258122 Jy
! Total flux subtracted in 200 components = 0.00258122 Jy
! Clean residual min=-0.001193 max=0.001207 Jy/beam
! Clean residual mean=-0.000003 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.693617 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 204 components and 0.693617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023916Jy  sigma=0.643764
! Fit after  self-cal, rms=0.023882Jy  sigma=0.642589
wmodel /J1540+1447_X_map.mod
! wmodel: Unable to open new model file: /J1540+1447_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1540+1447_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9181 x 2.195 at -2.162 degrees (North through East)
! Clean map  min=-0.001089  max=0.5777 Jy/beam
! Writing clean map to FITS file: .//J1540+1447_X_map.fits
wmodel .//J1540+1447_X_map.mod
! Writing 204 model components to file: .//J1540+1447_X_map.mod
wobs   .//J1540+1447_X_uvs.fits
! Writing UV FITS file: .//J1540+1447_X_uvs.fits
wwins  .//J1540+1447_X_map.win
! wwins: Wrote 8 windows to .//J1540+1447_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.577703 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000288118 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.149619 0.149619 0.299238 0.598477 1.19695 2.39391 4.78781 9.57563 19.1513 38.3025 76.605
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.577 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2005.09 
quit
! Quitting program
! Log file .//J1540+1447_X_dfm.log closed on Wed Nov 16 12:00:32 2016