! Started logfile: .//J1526+6650_X_dfm.log on Wed Nov 16 12:00:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1526+6650_X_uvm.fits
! Reading UV FITS file: .//J1526+6650_X_uvm.fits
! AN table 1: 63 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.680776 visibilities/baseline/integration-bin.
! Found source: J1526+6650
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 15440 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1526+6650_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 164 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.057526Jy  sigma=32.461275
! Fit after  self-cal, rms=0.685398Jy  sigma=20.955657
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8774 mas, bmaj=1.1 mas, bpa=0.2726 degrees
! Estimated noise=0.333932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.225432 Jy
! Component: 100  -  total flux cleaned = 0.303869 Jy
! Total flux subtracted in 100 components = 0.303869 Jy
! Clean residual min=-0.010578 max=0.031902 Jy/beam
! Clean residual mean=0.000005 rms=0.002515 Jy/beam
! Combined flux in latest and established models = 0.303869 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.303869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083048Jy  sigma=2.409549
! Fit after  self-cal, rms=0.082803Jy  sigma=2.404060
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0331338 Jy
! Component: 100  -  total flux cleaned = 0.051233 Jy
! Total flux subtracted in 100 components = 0.051233 Jy
! Clean residual min=-0.007669 max=0.009984 Jy/beam
! Clean residual mean=0.000001 rms=0.001555 Jy/beam
! Combined flux in latest and established models = 0.355102 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 17 components and 0.355102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058725Jy  sigma=1.590352
! Fit after  self-cal, rms=0.058672Jy  sigma=1.588227
! Inverting map 
! Added new window around map position (0.8, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120298 Jy
! Component: 100  -  total flux cleaned = 0.0202722 Jy
! Total flux subtracted in 100 components = 0.0202722 Jy
! Clean residual min=-0.008203 max=0.008133 Jy/beam
! Clean residual mean=-0.000000 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 0.375375 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.375374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053478Jy  sigma=1.410789
! Fit after  self-cal, rms=0.053322Jy  sigma=1.404689
! Inverting map 
! Added new window around map position (-7, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00713064 Jy
! Component: 100  -  total flux cleaned = 0.00989466 Jy
! Total flux subtracted in 100 components = 0.00989466 Jy
! Clean residual min=-0.007208 max=0.006914 Jy/beam
! Clean residual mean=-0.000001 rms=0.001244 Jy/beam
! Combined flux in latest and established models = 0.385269 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.385269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051423Jy  sigma=1.342919
! Fit after  self-cal, rms=0.051345Jy  sigma=1.339578
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.211 mas, bmaj=1.427 mas, bpa=9.961 degrees
! Estimated noise=0.190971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110015 Jy
! Component: 100  -  total flux cleaned = 0.0180558 Jy
! Component: 150  -  total flux cleaned = 0.0231204 Jy
! Component: 200  -  total flux cleaned = 0.0268962 Jy
! Total flux subtracted in 200 components = 0.0268962 Jy
! Clean residual min=-0.006307 max=0.006488 Jy/beam
! Clean residual mean=0.000012 rms=0.001319 Jy/beam
! Combined flux in latest and established models = 0.412165 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 63 components and 0.412165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048381Jy  sigma=1.243667
! Fit after  self-cal, rms=0.048238Jy  sigma=1.237834
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.211 x 1.427 at 9.961 degrees (North through East)
! Clean map  min=-0.0057221  max=0.30259 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        1.05     KP        1.05     
!   LA        0.94     MK        1.02     NL        1.05     OV        0.98     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.06     KP        1.05     
!   LA        0.95     MK        1.02     NL        1.05     OV        0.98     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        1.07     KP        1.04     
!   LA        0.94     MK        1.02     NL        1.06     OV        0.98     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.05     KP        1.05     
!   LA        0.95     MK        1.03     NL        1.05     OV        0.98     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.06     KP        1.06     
!   LA        0.95     MK        1.04     NL        1.07     OV        0.99     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.06     KP        1.06     
!   LA        0.95     MK        1.06     NL        1.06     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.08     KP        1.06     
!   LA        0.95     MK        1.06     NL        1.07     OV        1.00     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.08     KP        1.07     
!   LA        0.96     MK        1.04     NL        1.08     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.048238Jy  sigma=1.237834
! Fit after  self-cal, rms=0.044605Jy  sigma=1.071182
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.218 mas, bmaj=1.436 mas, bpa=10.78 degrees
! Estimated noise=0.191346 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00298585 Jy
! Component: 100  -  total flux cleaned = -0.00413766 Jy
! Component: 150  -  total flux cleaned = -0.00494919 Jy
! Component: 200  -  total flux cleaned = -0.00525432 Jy
! Total flux subtracted in 200 components = -0.00525432 Jy
! Clean residual min=-0.002484 max=0.002307 Jy/beam
! Clean residual mean=-0.000007 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.406911 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 88 components and 0.406911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044310Jy  sigma=1.059928
! Fit after  self-cal, rms=0.044288Jy  sigma=1.059269
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044288Jy  sigma=1.059269
! Fit after  self-cal, rms=0.044111Jy  sigma=1.042470
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.216 mas, bmaj=1.433 mas, bpa=9.354 degrees
! Estimated noise=0.190652 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113498 Jy
! Component: 100  -  total flux cleaned = -0.00169076 Jy
! Component: 150  -  total flux cleaned = -0.00194113 Jy
! Component: 200  -  total flux cleaned = -0.0022308 Jy
! Total flux subtracted in 200 components = -0.0022308 Jy
! Clean residual min=-0.001910 max=0.001501 Jy/beam
! Clean residual mean=-0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.40468 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.40468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044035Jy  sigma=1.038438
! Fit after  self-cal, rms=0.044030Jy  sigma=1.038286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000468109 Jy
! Component: 100  -  total flux cleaned = -0.000699726 Jy
! Component: 150  -  total flux cleaned = -0.000852834 Jy
! Component: 200  -  total flux cleaned = -0.000990105 Jy
! Total flux subtracted in 200 components = -0.000990105 Jy
! Clean residual min=-0.001893 max=0.001448 Jy/beam
! Clean residual mean=0.000000 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.40369 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 0.40369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044010Jy  sigma=1.036953
! Fit after  self-cal, rms=0.044009Jy  sigma=1.036918
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044009Jy  sigma=1.036918
! Fit after  self-cal, rms=0.044074Jy  sigma=1.035875
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.214 mas, bmaj=1.432 mas, bpa=8.373 degrees
! Estimated noise=0.190409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000658588 Jy
! Component: 100  -  total flux cleaned = -0.000940509 Jy
! Component: 150  -  total flux cleaned = -0.00107362 Jy
! Component: 200  -  total flux cleaned = -0.00116515 Jy
! Total flux subtracted in 200 components = -0.00116515 Jy
! Clean residual min=-0.001793 max=0.001405 Jy/beam
! Clean residual mean=0.000000 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.402525 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 111 components and 0.402525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044053Jy  sigma=1.034284
! Fit after  self-cal, rms=0.044051Jy  sigma=1.034253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000204135 Jy
! Component: 100  -  total flux cleaned = -0.000299635 Jy
! Component: 150  -  total flux cleaned = -0.000386915 Jy
! Component: 200  -  total flux cleaned = -0.000467156 Jy
! Total flux subtracted in 200 components = -0.000467156 Jy
! Clean residual min=-0.001780 max=0.001401 Jy/beam
! Clean residual mean=0.000001 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.402058 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 116 components and 0.402058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044044Jy  sigma=1.033661
! Fit after  self-cal, rms=0.044043Jy  sigma=1.033652
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044043Jy  sigma=1.033652
! Fit after  self-cal, rms=0.044087Jy  sigma=1.033186
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.401 mas, bmaj=2.632 mas, bpa=53.5 degrees
! Estimated noise=0.230938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000645788 Jy
! Component: 100  -  total flux cleaned = -0.000806539 Jy
! Component: 150  -  total flux cleaned = -0.000905337 Jy
! Component: 200  -  total flux cleaned = -0.000986856 Jy
! Total flux subtracted in 200 components = -0.000986856 Jy
! Clean residual min=-0.001229 max=0.001210 Jy/beam
! Clean residual mean=0.000002 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.401071 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 121 components and 0.401071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044081Jy  sigma=1.032688
! Fit after  self-cal, rms=0.044080Jy  sigma=1.032660
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113882 Jy
! Component: 100  -  total flux cleaned = -0.0001312 Jy
! Component: 150  -  total flux cleaned = -0.000138761 Jy
! Component: 200  -  total flux cleaned = -0.000145794 Jy
! Total flux subtracted in 200 components = -0.000145794 Jy
! Clean residual min=-0.001228 max=0.001201 Jy/beam
! Clean residual mean=0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.400925 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 125 components and 0.400925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044080Jy  sigma=1.032491
! Fit after  self-cal, rms=0.044079Jy  sigma=1.032487
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.212 mas, bmaj=1.432 mas, bpa=7.724 degrees
! Estimated noise=0.190193 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.212 x 1.432 at 7.724 degrees (North through East)
! Clean map  min=-0.0015621  max=0.30147 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8732 mas, bmaj=1.099 mas, bpa=-0.3153 degrees
! Estimated noise=0.331334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.224867 Jy
! Component: 100  -  total flux cleaned = 0.303792 Jy
! Component: 150  -  total flux cleaned = 0.338917 Jy
! Component: 200  -  total flux cleaned = 0.35819 Jy
! Total flux subtracted in 200 components = 0.35819 Jy
! Clean residual min=-0.004436 max=0.009792 Jy/beam
! Clean residual mean=0.000003 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.35819 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.35819 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.212 mas, bmaj=1.432 mas, bpa=7.724 degrees
! Estimated noise=0.190193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181108 Jy
! Component: 100  -  total flux cleaned = 0.0274268 Jy
! Component: 150  -  total flux cleaned = 0.0328922 Jy
! Component: 200  -  total flux cleaned = 0.0363243 Jy
! Total flux subtracted in 200 components = 0.0363243 Jy
! Clean residual min=-0.001552 max=0.002451 Jy/beam
! Clean residual mean=0.000008 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.394514 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 0.394514 Jy
! Inverting map 
! Added new window around map position (-1, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258699 Jy
! Component: 100  -  total flux cleaned = 0.00432432 Jy
! Component: 150  -  total flux cleaned = 0.00517758 Jy
! Component: 200  -  total flux cleaned = 0.00549289 Jy
! Total flux subtracted in 200 components = 0.00549289 Jy
! Clean residual min=-0.001778 max=0.001430 Jy/beam
! Clean residual mean=0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.400007 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 56 components and 0.400007 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.401 mas, bmaj=2.632 mas, bpa=53.5 degrees
! Estimated noise=0.230938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000800213 Jy
! Component: 100  -  total flux cleaned = 0.00103182 Jy
! Component: 150  -  total flux cleaned = 0.00116644 Jy
! Component: 200  -  total flux cleaned = 0.00125214 Jy
! Total flux subtracted in 200 components = 0.00125214 Jy
! Clean residual min=-0.001300 max=0.001225 Jy/beam
! Clean residual mean=0.000001 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.401259 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.45271e-05 Jy
! Component: 100  -  total flux cleaned = 3.59902e-05 Jy
! Component: 150  -  total flux cleaned = 4.62165e-05 Jy
! Component: 200  -  total flux cleaned = 5.6081e-05 Jy
! Total flux subtracted in 200 components = 5.6081e-05 Jy
! Clean residual min=-0.001277 max=0.001196 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.401315 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 81 components and 0.401315 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.212 mas, bmaj=1.432 mas, bpa=7.724 degrees
! Estimated noise=0.190193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00028477 Jy
! Component: 100  -  total flux cleaned = -0.000285252 Jy
! Component: 150  -  total flux cleaned = -0.000229649 Jy
! Component: 200  -  total flux cleaned = -0.000203888 Jy
! Total flux subtracted in 200 components = -0.000203888 Jy
! Clean residual min=-0.001708 max=0.001421 Jy/beam
! Clean residual mean=0.000001 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.401111 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 92 components and 0.401111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044237Jy  sigma=1.033953
! Fit after  self-cal, rms=0.044232Jy  sigma=1.033798
wmodel /J1526+6650_X_map.mod
! wmodel: Unable to open new model file: /J1526+6650_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1526+6650_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.212 x 1.432 at 7.724 degrees (North through East)
! Clean map  min=-0.0015734  max=0.30168 Jy/beam
! Writing clean map to FITS file: .//J1526+6650_X_map.fits
wmodel .//J1526+6650_X_map.mod
! Writing 92 model components to file: .//J1526+6650_X_map.mod
wobs   .//J1526+6650_X_uvs.fits
! Writing UV FITS file: .//J1526+6650_X_uvs.fits
wwins  .//J1526+6650_X_map.win
! wwins: Wrote 5 windows to .//J1526+6650_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.301682 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000313602 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.311853 0.311853 0.623706 1.24741 2.49483 4.98965 9.9793 19.9586 39.9172 79.8344
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.301 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  961.991 
quit
! Quitting program
! Log file .//J1526+6650_X_dfm.log closed on Wed Nov 16 12:00:19 2016