! Started logfile: .//J1505+0326_X_dfm.log on Wed Nov 16 11:59:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1505+0326_X_uva.fits
! Reading UV FITS file: .//J1505+0326_X_uva.fits
! AN table 1: 24 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.893519 visibilities/baseline/integration-bin.
! Found source: J1505+0326
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 6176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1505+0326_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.090651Jy  sigma=35.347616
! Fit after  self-cal, rms=0.581722Jy  sigma=18.923876
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.755 mas, bmaj=1.954 mas, bpa=-0.7739 degrees
! Estimated noise=0.384004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.32169 Jy
! Component: 100  -  total flux cleaned = 0.392003 Jy
! Total flux subtracted in 100 components = 0.392003 Jy
! Clean residual min=-0.013397 max=0.021246 Jy/beam
! Clean residual mean=-0.000005 rms=0.002943 Jy/beam
! Combined flux in latest and established models = 0.392003 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.392003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047977Jy  sigma=1.499878
! Fit after  self-cal, rms=0.047969Jy  sigma=1.499255
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223006 Jy
! Component: 100  -  total flux cleaned = 0.0342364 Jy
! Total flux subtracted in 100 components = 0.0342364 Jy
! Clean residual min=-0.011127 max=0.009218 Jy/beam
! Clean residual mean=-0.000006 rms=0.001682 Jy/beam
! Combined flux in latest and established models = 0.426239 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.426239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032939Jy  sigma=1.032616
! Fit after  self-cal, rms=0.032900Jy  sigma=1.031492
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8903 mas, bmaj=2.17 mas, bpa=-2.335 degrees
! Estimated noise=0.280185 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00882646 Jy
! Component: 100  -  total flux cleaned = 0.0132468 Jy
! Component: 150  -  total flux cleaned = 0.0158792 Jy
! Component: 200  -  total flux cleaned = 0.017393 Jy
! Total flux subtracted in 200 components = 0.017393 Jy
! Clean residual min=-0.009260 max=0.009495 Jy/beam
! Clean residual mean=-0.000021 rms=0.001901 Jy/beam
! Combined flux in latest and established models = 0.443632 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.443632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030216Jy  sigma=0.966848
! Fit after  self-cal, rms=0.030186Jy  sigma=0.966080
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8903 x 2.17 at -2.335 degrees (North through East)
! Clean map  min=-0.0085942  max=0.41706 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.01     KP        1.05     LA        0.95     
!   MK        0.99     NL        1.07     OV        0.98     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.02     KP        1.04     LA        0.96     
!   MK        0.99     NL        1.07     OV        0.97     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.01     KP        1.04     LA        0.95     
!   MK        0.99     NL        1.07     OV        0.98     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.01     KP        1.05     LA        0.95     
!   MK        0.98     NL        1.06     OV        0.97     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.01     KP        1.04     LA        0.95     
!   MK        1.00     NL        1.05     OV        0.97     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.00     KP        1.04     LA        0.94     
!   MK        0.99     NL        1.06     OV        0.98     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.00     KP        1.03     LA        0.95     
!   MK        1.00     NL        1.06     OV        0.98     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.00     KP        1.05     LA        0.95     
!   MK        0.99     NL        1.06     OV        0.98     PT        0.95     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.030186Jy  sigma=0.966080
! Fit after  self-cal, rms=0.022135Jy  sigma=0.698642
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8882 mas, bmaj=2.174 mas, bpa=-2.087 degrees
! Estimated noise=0.280016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164241 Jy
! Component: 100  -  total flux cleaned = 0.00144518 Jy
! Component: 150  -  total flux cleaned = 0.00127487 Jy
! Component: 200  -  total flux cleaned = 0.00123099 Jy
! Total flux subtracted in 200 components = 0.00123099 Jy
! Clean residual min=-0.001597 max=0.001894 Jy/beam
! Clean residual mean=-0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.444863 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.444863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021717Jy  sigma=0.685749
! Fit after  self-cal, rms=0.021700Jy  sigma=0.685400
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021700Jy  sigma=0.685400
! Fit after  self-cal, rms=0.021696Jy  sigma=0.685166
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8886 mas, bmaj=2.175 mas, bpa=-2.074 degrees
! Estimated noise=0.280075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.33477e-05 Jy
! Component: 100  -  total flux cleaned = -0.000131447 Jy
! Component: 150  -  total flux cleaned = -0.000131208 Jy
! Component: 200  -  total flux cleaned = -0.00016303 Jy
! Total flux subtracted in 200 components = -0.00016303 Jy
! Clean residual min=-0.001379 max=0.001711 Jy/beam
! Clean residual mean=-0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.4447 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 0.4447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021575Jy  sigma=0.681647
! Fit after  self-cal, rms=0.021572Jy  sigma=0.681563
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000710974 Jy
! Component: 100  -  total flux cleaned = 0.000849166 Jy
! Component: 150  -  total flux cleaned = 0.00118269 Jy
! Component: 200  -  total flux cleaned = 0.00131468 Jy
! Total flux subtracted in 200 components = 0.00131468 Jy
! Clean residual min=-0.001194 max=0.001398 Jy/beam
! Clean residual mean=-0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.446015 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 51 components and 0.446015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021439Jy  sigma=0.677158
! Fit after  self-cal, rms=0.021439Jy  sigma=0.677129
! Inverting map 
! Added new window around map position (29.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114568 Jy
! Component: 100  -  total flux cleaned = 0.00154091 Jy
! Component: 150  -  total flux cleaned = 0.00176954 Jy
! Component: 200  -  total flux cleaned = 0.00180983 Jy
! Total flux subtracted in 200 components = 0.00180983 Jy
! Clean residual min=-0.001076 max=0.001093 Jy/beam
! Clean residual mean=-0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.447825 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 67 components and 0.447825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021365Jy  sigma=0.674434
! Fit after  self-cal, rms=0.021362Jy  sigma=0.674367
! Inverting map 
! Added new window around map position (2, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000981404 Jy
! Component: 100  -  total flux cleaned = 0.0010362 Jy
! Component: 150  -  total flux cleaned = 0.00108017 Jy
! Component: 200  -  total flux cleaned = 0.00107941 Jy
! Total flux subtracted in 200 components = 0.00107941 Jy
! Clean residual min=-0.000983 max=0.000842 Jy/beam
! Clean residual mean=-0.000001 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.448904 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 80 components and 0.448904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021299Jy  sigma=0.672344
! Fit after  self-cal, rms=0.021298Jy  sigma=0.672321
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021298Jy  sigma=0.672321
! Fit after  self-cal, rms=0.021277Jy  sigma=0.672063
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8889 mas, bmaj=2.175 mas, bpa=-2.05 degrees
! Estimated noise=0.279959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117876 Jy
! Component: 100  -  total flux cleaned = -0.000186473 Jy
! Component: 150  -  total flux cleaned = -0.000265496 Jy
! Component: 200  -  total flux cleaned = -0.00032374 Jy
! Total flux subtracted in 200 components = -0.00032374 Jy
! Clean residual min=-0.000842 max=0.000819 Jy/beam
! Clean residual mean=-0.000001 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.44858 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.44858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021254Jy  sigma=0.671316
! Fit after  self-cal, rms=0.021254Jy  sigma=0.671304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100305 Jy
! Component: 100  -  total flux cleaned = -0.000166683 Jy
! Component: 150  -  total flux cleaned = -0.000228664 Jy
! Component: 200  -  total flux cleaned = -0.000240061 Jy
! Total flux subtracted in 200 components = -0.000240061 Jy
! Clean residual min=-0.000816 max=0.000808 Jy/beam
! Clean residual mean=-0.000001 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.44834 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 100 components and 0.44834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021241Jy  sigma=0.670891
! Fit after  self-cal, rms=0.021241Jy  sigma=0.670886
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021241Jy  sigma=0.670886
! Fit after  self-cal, rms=0.021233Jy  sigma=0.670828
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2 mas, bmaj=3.384 mas, bpa=-6.75 degrees
! Estimated noise=0.363792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107096 Jy
! Component: 100  -  total flux cleaned = 0.000121422 Jy
! Component: 150  -  total flux cleaned = 0.00012147 Jy
! Component: 200  -  total flux cleaned = 8.98719e-05 Jy
! Total flux subtracted in 200 components = 8.98719e-05 Jy
! Clean residual min=-0.000883 max=0.000874 Jy/beam
! Clean residual mean=-0.000002 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.44843 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 115 components and 0.44843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021228Jy  sigma=0.670700
! Fit after  self-cal, rms=0.021228Jy  sigma=0.670696
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.06404e-05 Jy
! Component: 100  -  total flux cleaned = -4.95439e-05 Jy
! Component: 150  -  total flux cleaned = -7.61171e-05 Jy
! Component: 200  -  total flux cleaned = -7.59764e-05 Jy
! Total flux subtracted in 200 components = -7.59764e-05 Jy
! Clean residual min=-0.000848 max=0.000829 Jy/beam
! Clean residual mean=-0.000002 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.448354 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.448354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021225Jy  sigma=0.670646
! Fit after  self-cal, rms=0.021225Jy  sigma=0.670642
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.889 mas, bmaj=2.175 mas, bpa=-2.038 degrees
! Estimated noise=0.279908 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.889 x 2.175 at -2.038 degrees (North through East)
! Clean map  min=-0.0011713  max=0.41669 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7535 mas, bmaj=1.954 mas, bpa=-0.6443 degrees
! Estimated noise=0.384995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.320741 Jy
! Component: 100  -  total flux cleaned = 0.390998 Jy
! Component: 150  -  total flux cleaned = 0.414223 Jy
! Component: 200  -  total flux cleaned = 0.42671 Jy
! Total flux subtracted in 200 components = 0.42671 Jy
! Clean residual min=-0.003800 max=0.006039 Jy/beam
! Clean residual mean=-0.000000 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.42671 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.42671 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.889 mas, bmaj=2.175 mas, bpa=-2.038 degrees
! Estimated noise=0.279908 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00816268 Jy
! Component: 100  -  total flux cleaned = 0.0121617 Jy
! Component: 150  -  total flux cleaned = 0.0139663 Jy
! Component: 200  -  total flux cleaned = 0.0150336 Jy
! Total flux subtracted in 200 components = 0.0150336 Jy
! Clean residual min=-0.001548 max=0.002374 Jy/beam
! Clean residual mean=-0.000002 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.441743 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 23 components and 0.441744 Jy
! Inverting map 
! Added new window around map position (-1.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206853 Jy
! Component: 100  -  total flux cleaned = 0.00272713 Jy
! Component: 150  -  total flux cleaned = 0.00314483 Jy
! Component: 200  -  total flux cleaned = 0.00346151 Jy
! Total flux subtracted in 200 components = 0.00346151 Jy
! Clean residual min=-0.001192 max=0.001127 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.445205 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 42 components and 0.445205 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2 mas, bmaj=3.384 mas, bpa=-6.75 degrees
! Estimated noise=0.363792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000520983 Jy
! Component: 100  -  total flux cleaned = 0.000707442 Jy
! Component: 150  -  total flux cleaned = 0.000826587 Jy
! Component: 200  -  total flux cleaned = 0.000994665 Jy
! Total flux subtracted in 200 components = 0.000994665 Jy
! Clean residual min=-0.001051 max=0.000925 Jy/beam
! Clean residual mean=-0.000003 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.4462 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132433 Jy
! Component: 100  -  total flux cleaned = 0.000236609 Jy
! Component: 150  -  total flux cleaned = 0.000349622 Jy
! Component: 200  -  total flux cleaned = 0.000424571 Jy
! Total flux subtracted in 200 components = 0.000424571 Jy
! Clean residual min=-0.000960 max=0.000865 Jy/beam
! Clean residual mean=-0.000002 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.446624 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 78 components and 0.446624 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.889 mas, bmaj=2.175 mas, bpa=-2.038 degrees
! Estimated noise=0.279908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000384058 Jy
! Component: 100  -  total flux cleaned = -0.000449041 Jy
! Component: 150  -  total flux cleaned = -0.000478874 Jy
! Component: 200  -  total flux cleaned = -0.000453118 Jy
! Total flux subtracted in 200 components = -0.000453118 Jy
! Clean residual min=-0.000857 max=0.000929 Jy/beam
! Clean residual mean=-0.000001 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.446171 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 100 components and 0.446171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021296Jy  sigma=0.672985
! Fit after  self-cal, rms=0.021289Jy  sigma=0.672741
wmodel /J1505+0326_X_map.mod
! wmodel: Unable to open new model file: /J1505+0326_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1505+0326_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.889 x 2.175 at -2.038 degrees (North through East)
! Clean map  min=-0.0011861  max=0.41675 Jy/beam
! Writing clean map to FITS file: .//J1505+0326_X_map.fits
wmodel .//J1505+0326_X_map.mod
! Writing 100 model components to file: .//J1505+0326_X_map.mod
wobs   .//J1505+0326_X_uvs.fits
! Writing UV FITS file: .//J1505+0326_X_uvs.fits
wwins  .//J1505+0326_X_map.win
! wwins: Wrote 6 windows to .//J1505+0326_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.416746 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000218013 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.156939 0.156939 0.313879 0.627757 1.25551 2.51103 5.02206 10.0441 20.0882 40.1765 80.3529
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.416 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1911.57 
quit
! Quitting program
! Log file .//J1505+0326_X_dfm.log closed on Wed Nov 16 11:59:54 2016