! Started logfile: .//J1438-2204_X_dfm.log on Wed Nov 16 11:59:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1438-2204_X_uvm.fits
! Reading UV FITS file: .//J1438-2204_X_uvm.fits
! AN table 1: 68 integrations on 45 of 45 possible baselines.
! AN table 2: 40 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.822249 visibilities/baseline/integration-bin.
! Found source: J1438-2204
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 27496 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1438-2204_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 121 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.146290Jy  sigma=32.421596
! Fit after  self-cal, rms=0.499573Jy  sigma=13.510430
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7411 mas, bmaj=1.901 mas, bpa=-1.997 degrees
! Estimated noise=0.28685 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.40108 Jy
! Component: 100  -  total flux cleaned = 0.493099 Jy
! Total flux subtracted in 100 components = 0.493099 Jy
! Clean residual min=-0.024645 max=0.050822 Jy/beam
! Clean residual mean=-0.000047 rms=0.005503 Jy/beam
! Combined flux in latest and established models = 0.493099 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.493099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.125979Jy  sigma=3.573994
! Fit after  self-cal, rms=0.125900Jy  sigma=3.572228
! Inverting map 
! Added new window around map position (-1.2, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0476664 Jy
! Component: 100  -  total flux cleaned = 0.0755541 Jy
! Total flux subtracted in 100 components = 0.0755541 Jy
! Clean residual min=-0.016336 max=0.038691 Jy/beam
! Clean residual mean=-0.000028 rms=0.004010 Jy/beam
! Combined flux in latest and established models = 0.568653 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.568653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.103444Jy  sigma=2.816467
! Fit after  self-cal, rms=0.102757Jy  sigma=2.764112
! Inverting map 
! Added new window around map position (1.2, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0352635 Jy
! Component: 100  -  total flux cleaned = 0.0570452 Jy
! Total flux subtracted in 100 components = 0.0570452 Jy
! Clean residual min=-0.014199 max=0.018104 Jy/beam
! Clean residual mean=-0.000015 rms=0.002891 Jy/beam
! Combined flux in latest and established models = 0.625699 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.625699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086626Jy  sigma=2.300808
! Fit after  self-cal, rms=0.085481Jy  sigma=2.280773
! Inverting map 
! Added new window around map position (1.2, 3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184424 Jy
! Component: 100  -  total flux cleaned = 0.030471 Jy
! Total flux subtracted in 100 components = 0.030471 Jy
! Clean residual min=-0.011646 max=0.013136 Jy/beam
! Clean residual mean=-0.000009 rms=0.002375 Jy/beam
! Combined flux in latest and established models = 0.65617 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 0.65617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081289Jy  sigma=2.170351
! Fit after  self-cal, rms=0.080792Jy  sigma=2.163847
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9612 mas, bmaj=2.684 mas, bpa=-9.696 degrees
! Estimated noise=0.154657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035646 Jy
! Component: 100  -  total flux cleaned = 0.00356597 Jy
! Component: 150  -  total flux cleaned = 0.0032919 Jy
! Component: 200  -  total flux cleaned = 0.003059 Jy
! Total flux subtracted in 200 components = 0.003059 Jy
! Clean residual min=-0.011407 max=0.009702 Jy/beam
! Clean residual mean=0.000002 rms=0.002668 Jy/beam
! Combined flux in latest and established models = 0.659229 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.659229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.078081Jy  sigma=2.114628
! Fit after  self-cal, rms=0.077635Jy  sigma=2.108143
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9612 x 2.684 at -9.696 degrees (North through East)
! Clean map  min=-0.010685  max=0.48615 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     HN        1.03     KP        1.03     
!   LA        0.95     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.95     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     FD        1.05     HN        1.07     LA        1.13     
!   MK        0.99     NL        1.03     OV        1.04     PT        1.12     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.91     HN        1.03     KP        1.03     
!   LA        0.93     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.95     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     FD        1.05     HN        1.06     LA        1.14     
!   MK        0.98     NL        1.05     OV        1.03     PT        1.12     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.91     HN        1.03     KP        1.03     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.94     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     FD        1.06     HN        1.06     LA        1.14     
!   MK        1.03     NL        1.02     OV        1.03     PT        1.12     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     HN        1.03     KP        1.03     
!   LA        0.95     MK        0.99     NL        1.00     OV        0.96     
!   PT        0.95     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     FD        1.06     HN        1.07     LA        1.13     
!   MK        1.00     NL        1.04     OV        1.04     PT        1.11     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.90     HN        1.04     KP        1.02     
!   LA        0.95     MK        0.98     NL        0.99     OV        0.97     
!   PT        0.94     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     FD        1.03     HN        1.08     LA        1.14     
!   MK        1.02     NL        1.03     OV        1.02     PT        1.12     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.90     HN        1.03     KP        1.02     
!   LA        0.95     MK        0.98     NL        0.99     OV        0.97     
!   PT        0.95     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.17     FD        1.04     HN        1.08     LA        1.14     
!   MK        1.04     NL        1.04     OV        1.03     PT        1.11     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.90     HN        1.03     KP        1.03     
!   LA        0.95     MK        0.97     NL        1.00     OV        0.97     
!   PT        0.95     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     FD        1.04     HN        1.09     LA        1.13     
!   MK        1.05     NL        1.02     OV        1.03     PT        1.11     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.89     HN        1.03     KP        1.02     
!   LA        0.95     MK        0.97     NL        0.98     OV        0.96     
!   PT        0.95     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.16     FD        1.03     HN        1.06     LA        1.13     
!   MK        1.04     NL        1.04     OV        1.03     PT        1.10     
! 
! 
! Fit before self-cal, rms=0.077635Jy  sigma=2.108143
! Fit after  self-cal, rms=0.054363Jy  sigma=1.349483
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9634 mas, bmaj=2.675 mas, bpa=-9.51 degrees
! Estimated noise=0.155933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00627285 Jy
! Component: 100  -  total flux cleaned = -0.0071197 Jy
! Component: 150  -  total flux cleaned = -0.00712555 Jy
! Component: 200  -  total flux cleaned = -0.00726987 Jy
! Total flux subtracted in 200 components = -0.00726987 Jy
! Clean residual min=-0.005638 max=0.004662 Jy/beam
! Clean residual mean=-0.000008 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 0.651959 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 84 components and 0.651959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052285Jy  sigma=1.305837
! Fit after  self-cal, rms=0.051829Jy  sigma=1.298441
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051829Jy  sigma=1.298441
! Fit after  self-cal, rms=0.051727Jy  sigma=1.291796
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.965 mas, bmaj=2.675 mas, bpa=-9.466 degrees
! Estimated noise=0.15596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00426114 Jy
! Component: 100  -  total flux cleaned = -0.00483094 Jy
! Component: 150  -  total flux cleaned = -0.00471713 Jy
! Component: 200  -  total flux cleaned = -0.00482567 Jy
! Total flux subtracted in 200 components = -0.00482567 Jy
! Clean residual min=-0.004905 max=0.004170 Jy/beam
! Clean residual mean=-0.000007 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.647133 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.647133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050707Jy  sigma=1.271333
! Fit after  self-cal, rms=0.050451Jy  sigma=1.267572
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012584 Jy
! Component: 100  -  total flux cleaned = -0.000332509 Jy
! Component: 150  -  total flux cleaned = -0.000519175 Jy
! Component: 200  -  total flux cleaned = -0.000605791 Jy
! Total flux subtracted in 200 components = -0.000605791 Jy
! Clean residual min=-0.004478 max=0.004058 Jy/beam
! Clean residual mean=-0.000007 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.646527 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.646527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049956Jy  sigma=1.257053
! Fit after  self-cal, rms=0.049813Jy  sigma=1.255096
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049813Jy  sigma=1.255096
! Fit after  self-cal, rms=0.049227Jy  sigma=1.235933
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.965 mas, bmaj=2.672 mas, bpa=-9.476 degrees
! Estimated noise=0.155763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00293988 Jy
! Component: 100  -  total flux cleaned = -0.003191 Jy
! Component: 150  -  total flux cleaned = -0.00341609 Jy
! Component: 200  -  total flux cleaned = -0.00362141 Jy
! Total flux subtracted in 200 components = -0.00362141 Jy
! Clean residual min=-0.003751 max=0.003374 Jy/beam
! Clean residual mean=-0.000005 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.642906 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 104 components and 0.642906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048805Jy  sigma=1.227783
! Fit after  self-cal, rms=0.048711Jy  sigma=1.226502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.1148e-05 Jy
! Component: 100  -  total flux cleaned = -0.000270146 Jy
! Component: 150  -  total flux cleaned = -0.000387363 Jy
! Component: 200  -  total flux cleaned = -0.0005497 Jy
! Total flux subtracted in 200 components = -0.0005497 Jy
! Clean residual min=-0.003512 max=0.003340 Jy/beam
! Clean residual mean=-0.000005 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.642356 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 106 components and 0.642356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048500Jy  sigma=1.222322
! Fit after  self-cal, rms=0.048440Jy  sigma=1.221536
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048440Jy  sigma=1.221536
! Fit after  self-cal, rms=0.048301Jy  sigma=1.218941
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.297 mas, bmaj=5.465 mas, bpa=1.303 degrees
! Estimated noise=0.18588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00199689 Jy
! Component: 100  -  total flux cleaned = -0.00217225 Jy
! Component: 150  -  total flux cleaned = -0.00224312 Jy
! Component: 200  -  total flux cleaned = -0.00224369 Jy
! Total flux subtracted in 200 components = -0.00224369 Jy
! Clean residual min=-0.003256 max=0.003694 Jy/beam
! Clean residual mean=-0.000008 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.640112 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 112 components and 0.640112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048163Jy  sigma=1.217497
! Fit after  self-cal, rms=0.048132Jy  sigma=1.217137
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 19.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122662 Jy
! Component: 100  -  total flux cleaned = 0.000973628 Jy
! Component: 150  -  total flux cleaned = 0.00104378 Jy
! Component: 200  -  total flux cleaned = 0.00109548 Jy
! Total flux subtracted in 200 components = 0.00109548 Jy
! Clean residual min=-0.002422 max=0.003023 Jy/beam
! Clean residual mean=-0.000005 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.641208 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 141 components and 0.641208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047792Jy  sigma=1.210729
! Fit after  self-cal, rms=0.047790Jy  sigma=1.210451
! Inverting map 
! Added new window around map position (-6.2, 20.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190506 Jy
! Component: 100  -  total flux cleaned = 0.00211341 Jy
! Component: 150  -  total flux cleaned = 0.00189865 Jy
! Component: 200  -  total flux cleaned = 0.00185068 Jy
! Total flux subtracted in 200 components = 0.00185068 Jy
! Clean residual min=-0.001941 max=0.002034 Jy/beam
! Clean residual mean=-0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.643059 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 173 components and 0.643059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047538Jy  sigma=1.206541
! Fit after  self-cal, rms=0.047521Jy  sigma=1.205989
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9648 mas, bmaj=2.668 mas, bpa=-9.436 degrees
! Estimated noise=0.15562 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9648 x 2.668 at -9.436 degrees (North through East)
! Clean map  min=-0.0059715  max=0.49041 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7427 mas, bmaj=1.902 mas, bpa=-1.539 degrees
! Estimated noise=0.282393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.393426 Jy
! Component: 100  -  total flux cleaned = 0.487304 Jy
! Component: 150  -  total flux cleaned = 0.535834 Jy
! Component: 200  -  total flux cleaned = 0.567881 Jy
! Total flux subtracted in 200 components = 0.567881 Jy
! Clean residual min=-0.010049 max=0.017429 Jy/beam
! Clean residual mean=-0.000022 rms=0.002298 Jy/beam
! Combined flux in latest and established models = 0.567881 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.567881 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9648 mas, bmaj=2.668 mas, bpa=-9.436 degrees
! Estimated noise=0.15562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334213 Jy
! Component: 100  -  total flux cleaned = 0.0509105 Jy
! Component: 150  -  total flux cleaned = 0.0608973 Jy
! Component: 200  -  total flux cleaned = 0.0671452 Jy
! Total flux subtracted in 200 components = 0.0671452 Jy
! Clean residual min=-0.004413 max=0.004782 Jy/beam
! Clean residual mean=-0.000009 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.635026 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 72 components and 0.635026 Jy
! Inverting map 
! Added new window around map position (3.4, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235564 Jy
! Component: 100  -  total flux cleaned = 0.00379527 Jy
! Component: 150  -  total flux cleaned = 0.00530828 Jy
! Component: 200  -  total flux cleaned = 0.00674624 Jy
! Total flux subtracted in 200 components = 0.00674624 Jy
! Clean residual min=-0.002861 max=0.002878 Jy/beam
! Clean residual mean=-0.000005 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.641772 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 95 components and 0.641773 Jy
! Inverting map 
! Added new window around map position (-0.6, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166888 Jy
! Component: 100  -  total flux cleaned = 0.00187025 Jy
! Component: 150  -  total flux cleaned = 0.00205718 Jy
! Component: 200  -  total flux cleaned = 0.00231562 Jy
! Total flux subtracted in 200 components = 0.00231562 Jy
! Clean residual min=-0.002392 max=0.002201 Jy/beam
! Clean residual mean=-0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.644088 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 127 components and 0.644088 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.297 mas, bmaj=5.465 mas, bpa=1.303 degrees
! Estimated noise=0.18588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000293107 Jy
! Component: 100  -  total flux cleaned = -7.88765e-05 Jy
! Component: 150  -  total flux cleaned = -8.14968e-05 Jy
! Component: 200  -  total flux cleaned = 3.83812e-05 Jy
! Total flux subtracted in 200 components = 3.83812e-05 Jy
! Clean residual min=-0.002312 max=0.001836 Jy/beam
! Clean residual mean=-0.000005 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.644126 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166566 Jy
! Component: 100  -  total flux cleaned = 0.000270321 Jy
! Component: 150  -  total flux cleaned = 0.000462501 Jy
! Component: 200  -  total flux cleaned = 0.000552948 Jy
! Total flux subtracted in 200 components = 0.000552948 Jy
! Clean residual min=-0.002037 max=0.001641 Jy/beam
! Clean residual mean=-0.000003 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.644679 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 171 components and 0.644679 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9648 mas, bmaj=2.668 mas, bpa=-9.436 degrees
! Estimated noise=0.15562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000165275 Jy
! Component: 100  -  total flux cleaned = 0.000162328 Jy
! Component: 150  -  total flux cleaned = 0.000228129 Jy
! Component: 200  -  total flux cleaned = 0.000290126 Jy
! Total flux subtracted in 200 components = 0.000290126 Jy
! Clean residual min=-0.001909 max=0.001783 Jy/beam
! Clean residual mean=-0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.64497 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 191 components and 0.64497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046941Jy  sigma=1.196469
! Fit after  self-cal, rms=0.046894Jy  sigma=1.194761
wmodel /J1438-2204_X_map.mod
! wmodel: Unable to open new model file: /J1438-2204_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1438-2204_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9648 x 2.668 at -9.436 degrees (North through East)
! Clean map  min=-0.0036796  max=0.49042 Jy/beam
! Writing clean map to FITS file: .//J1438-2204_X_map.fits
wmodel .//J1438-2204_X_map.mod
! Writing 191 model components to file: .//J1438-2204_X_map.mod
wobs   .//J1438-2204_X_uvs.fits
! Writing UV FITS file: .//J1438-2204_X_uvs.fits
wwins  .//J1438-2204_X_map.win
! wwins: Wrote 8 windows to .//J1438-2204_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.490423 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000411141 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.251502 0.251502 0.503004 1.00601 2.01202 4.02403 8.04807 16.0961 32.1923 64.3845
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.49 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1192.83 
quit
! Quitting program
! Log file .//J1438-2204_X_dfm.log closed on Wed Nov 16 11:59:41 2016