! Started logfile: .//J1408-0752_X_dfm.log on Wed Nov 16 11:59:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1408-0752_X_uvm.fits
! Reading UV FITS file: .//J1408-0752_X_uvm.fits
! AN table 1: 71 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.826917 visibilities/baseline/integration-bin.
! Found source: J1408-0752
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 21136 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1408-0752_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.191040Jy  sigma=34.401469
! Fit after  self-cal, rms=0.424374Jy  sigma=12.065888
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8055 mas, bmaj=1.978 mas, bpa=-1.453 degrees
! Estimated noise=0.29351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.423764 Jy
! Component: 100  -  total flux cleaned = 0.572105 Jy
! Total flux subtracted in 100 components = 0.572105 Jy
! Clean residual min=-0.020358 max=0.067584 Jy/beam
! Clean residual mean=-0.000051 rms=0.005323 Jy/beam
! Combined flux in latest and established models = 0.572104 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.572104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.149104Jy  sigma=4.259098
! Fit after  self-cal, rms=0.148158Jy  sigma=4.229571
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0776635 Jy
! Component: 100  -  total flux cleaned = 0.11931 Jy
! Total flux subtracted in 100 components = 0.11931 Jy
! Clean residual min=-0.012619 max=0.025825 Jy/beam
! Clean residual mean=-0.000029 rms=0.002607 Jy/beam
! Combined flux in latest and established models = 0.691415 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.691415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.078131Jy  sigma=2.168190
! Fit after  self-cal, rms=0.077771Jy  sigma=2.158063
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273953 Jy
! Component: 100  -  total flux cleaned = 0.0422371 Jy
! Total flux subtracted in 100 components = 0.0422371 Jy
! Clean residual min=-0.010119 max=0.014568 Jy/beam
! Clean residual mean=-0.000021 rms=0.002072 Jy/beam
! Combined flux in latest and established models = 0.733652 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 9 components and 0.733652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063822Jy  sigma=1.775678
! Fit after  self-cal, rms=0.063605Jy  sigma=1.769787
! Inverting map 
! Added new window around map position (-1.8, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013111 Jy
! Component: 100  -  total flux cleaned = 0.0179063 Jy
! Total flux subtracted in 100 components = 0.0179063 Jy
! Clean residual min=-0.010027 max=0.012031 Jy/beam
! Clean residual mean=-0.000018 rms=0.001900 Jy/beam
! Combined flux in latest and established models = 0.751558 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.751558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060058Jy  sigma=1.671593
! Fit after  self-cal, rms=0.059806Jy  sigma=1.662960
! Inverting map 
! Added new window around map position (-7.2, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119338 Jy
! Component: 100  -  total flux cleaned = 0.0197365 Jy
! Total flux subtracted in 100 components = 0.0197365 Jy
! Clean residual min=-0.008986 max=0.010819 Jy/beam
! Clean residual mean=-0.000016 rms=0.001740 Jy/beam
! Combined flux in latest and established models = 0.771295 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 37 components and 0.771294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055429Jy  sigma=1.529923
! Fit after  self-cal, rms=0.055361Jy  sigma=1.527219
! Inverting map 
! Added new window around map position (4, 5.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00929223 Jy
! Component: 100  -  total flux cleaned = 0.0156495 Jy
! Total flux subtracted in 100 components = 0.0156495 Jy
! Clean residual min=-0.008707 max=0.008858 Jy/beam
! Clean residual mean=-0.000016 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.786944 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 45 components and 0.786944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053253Jy  sigma=1.467306
! Fit after  self-cal, rms=0.053177Jy  sigma=1.465153
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.051 mas, bmaj=2.399 mas, bpa=-0.4771 degrees
! Estimated noise=0.173569 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.4, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143871 Jy
! Component: 100  -  total flux cleaned = 0.0240803 Jy
! Component: 150  -  total flux cleaned = 0.0317122 Jy
! Component: 200  -  total flux cleaned = 0.0376688 Jy
! Total flux subtracted in 200 components = 0.0376688 Jy
! Clean residual min=-0.007752 max=0.008799 Jy/beam
! Clean residual mean=-0.000020 rms=0.001982 Jy/beam
! Combined flux in latest and established models = 0.824613 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 92 components and 0.824613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048157Jy  sigma=1.299500
! Fit after  self-cal, rms=0.047874Jy  sigma=1.290041
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.051 x 2.399 at -0.4771 degrees (North through East)
! Clean map  min=-0.0070875  max=0.59489 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.00     KP        1.06     
!   LA        0.96     MK        0.99     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.01     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.01     KP        1.05     
!   LA        0.96     MK        0.99     NL        1.05     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.96     MK        0.99     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.95     MK        0.99     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.01     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.03     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.95     MK        0.99     NL        1.04     OV        1.01     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.96     MK        0.97     NL        1.04     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.047874Jy  sigma=1.290041
! Fit after  self-cal, rms=0.036969Jy  sigma=0.936158
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=2.408 mas, bpa=-0.3007 degrees
! Estimated noise=0.173406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133721 Jy
! Component: 100  -  total flux cleaned = -0.00162357 Jy
! Component: 150  -  total flux cleaned = -0.00200236 Jy
! Component: 200  -  total flux cleaned = -0.0025662 Jy
! Total flux subtracted in 200 components = -0.0025662 Jy
! Clean residual min=-0.003278 max=0.004088 Jy/beam
! Clean residual mean=0.000013 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.822046 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 112 components and 0.822046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035907Jy  sigma=0.902126
! Fit after  self-cal, rms=0.035846Jy  sigma=0.900787
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035846Jy  sigma=0.900787
! Fit after  self-cal, rms=0.032985Jy  sigma=0.815381
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.046 mas, bmaj=2.41 mas, bpa=-0.3324 degrees
! Estimated noise=0.173112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000326674 Jy
! Component: 100  -  total flux cleaned = -0.000996775 Jy
! Component: 150  -  total flux cleaned = -0.00155579 Jy
! Component: 200  -  total flux cleaned = -0.00178977 Jy
! Total flux subtracted in 200 components = -0.00178977 Jy
! Clean residual min=-0.002747 max=0.003459 Jy/beam
! Clean residual mean=0.000015 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.820257 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 126 components and 0.820257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032325Jy  sigma=0.795214
! Fit after  self-cal, rms=0.032287Jy  sigma=0.793933
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13.2, -6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317111 Jy
! Component: 100  -  total flux cleaned = 0.00376066 Jy
! Component: 150  -  total flux cleaned = 0.00383392 Jy
! Component: 200  -  total flux cleaned = 0.00383149 Jy
! Total flux subtracted in 200 components = 0.00383149 Jy
! Clean residual min=-0.002410 max=0.002918 Jy/beam
! Clean residual mean=0.000013 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.824088 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 144 components and 0.824088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031824Jy  sigma=0.779235
! Fit after  self-cal, rms=0.031791Jy  sigma=0.778223
! Inverting map 
! Added new window around map position (-6.2, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259539 Jy
! Component: 100  -  total flux cleaned = 0.00325292 Jy
! Component: 150  -  total flux cleaned = 0.00331571 Jy
! Component: 200  -  total flux cleaned = 0.00348286 Jy
! Total flux subtracted in 200 components = 0.00348286 Jy
! Clean residual min=-0.002352 max=0.002509 Jy/beam
! Clean residual mean=0.000012 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.827571 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 162 components and 0.827571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031449Jy  sigma=0.768136
! Fit after  self-cal, rms=0.031429Jy  sigma=0.767663
! Inverting map 
! Added new window around map position (-2.8, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145258 Jy
! Component: 100  -  total flux cleaned = 0.00152183 Jy
! Component: 150  -  total flux cleaned = 0.00180645 Jy
! Component: 200  -  total flux cleaned = 0.0020704 Jy
! Total flux subtracted in 200 components = 0.0020704 Jy
! Clean residual min=-0.002270 max=0.001955 Jy/beam
! Clean residual mean=0.000012 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.829641 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 178 components and 0.829641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031130Jy  sigma=0.759677
! Fit after  self-cal, rms=0.031119Jy  sigma=0.759338
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031119Jy  sigma=0.759338
! Fit after  self-cal, rms=0.030609Jy  sigma=0.742561
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=2.409 mas, bpa=-0.2973 degrees
! Estimated noise=0.172961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00058468 Jy
! Component: 100  -  total flux cleaned = -0.000524715 Jy
! Component: 150  -  total flux cleaned = -0.000354314 Jy
! Component: 200  -  total flux cleaned = -0.000198231 Jy
! Total flux subtracted in 200 components = -0.000198231 Jy
! Clean residual min=-0.001537 max=0.001690 Jy/beam
! Clean residual mean=0.000005 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.829443 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 191 components and 0.829443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030385Jy  sigma=0.735583
! Fit after  self-cal, rms=0.030376Jy  sigma=0.735372
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00056997 Jy
! Component: 100  -  total flux cleaned = 0.000771159 Jy
! Component: 150  -  total flux cleaned = 0.000814742 Jy
! Component: 200  -  total flux cleaned = 0.0010304 Jy
! Total flux subtracted in 200 components = 0.0010304 Jy
! Clean residual min=-0.001425 max=0.001413 Jy/beam
! Clean residual mean=0.000005 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.830474 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 208 components and 0.830473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030210Jy  sigma=0.730625
! Fit after  self-cal, rms=0.030207Jy  sigma=0.730540
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030207Jy  sigma=0.730540
! Fit after  self-cal, rms=0.030165Jy  sigma=0.729655
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.279 mas, bmaj=3.896 mas, bpa=-0.02471 degrees
! Estimated noise=0.20955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184358 Jy
! Component: 100  -  total flux cleaned = 9.60714e-05 Jy
! Component: 150  -  total flux cleaned = 0.000131794 Jy
! Component: 200  -  total flux cleaned = 0.000291302 Jy
! Total flux subtracted in 200 components = 0.000291302 Jy
! Clean residual min=-0.001433 max=0.001204 Jy/beam
! Clean residual mean=0.000007 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.830765 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 234 components and 0.830765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030095Jy  sigma=0.727353
! Fit after  self-cal, rms=0.030086Jy  sigma=0.727179
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000378561 Jy
! Component: 100  -  total flux cleaned = 0.000523885 Jy
! Component: 150  -  total flux cleaned = 0.000683718 Jy
! Component: 200  -  total flux cleaned = 0.000830337 Jy
! Total flux subtracted in 200 components = 0.000830337 Jy
! Clean residual min=-0.001398 max=0.001159 Jy/beam
! Clean residual mean=0.000007 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.831595 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 247 components and 0.831595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030051Jy  sigma=0.726085
! Fit after  self-cal, rms=0.030048Jy  sigma=0.726028
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=2.409 mas, bpa=-0.2948 degrees
! Estimated noise=0.172888 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.044 x 2.409 at -0.2948 degrees (North through East)
! Clean map  min=-0.0014199  max=0.59357 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030048Jy  sigma=0.726028
! Fit after  self-cal, rms=0.027619Jy  sigma=0.655266
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=2.409 mas, bpa=-0.3133 degrees
! Estimated noise=0.172856 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000340637 Jy
! Component: 100  -  total flux cleaned = -0.000541169 Jy
! Component: 150  -  total flux cleaned = -0.000723595 Jy
! Component: 200  -  total flux cleaned = -0.000792729 Jy
! Total flux subtracted in 200 components = -0.000792729 Jy
! Clean residual min=-0.001206 max=0.001126 Jy/beam
! Clean residual mean=0.000003 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.830802 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 268 components and 0.830802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027513Jy  sigma=0.652118
! Fit after  self-cal, rms=0.027510Jy  sigma=0.652035
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.69692e-05 Jy
! Component: 100  -  total flux cleaned = -0.000193071 Jy
! Component: 150  -  total flux cleaned = -0.000254166 Jy
! Component: 200  -  total flux cleaned = -0.00034177 Jy
! Total flux subtracted in 200 components = -0.00034177 Jy
! Clean residual min=-0.001134 max=0.001123 Jy/beam
! Clean residual mean=0.000003 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.830461 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 280 components and 0.830461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027442Jy  sigma=0.650142
! Fit after  self-cal, rms=0.027441Jy  sigma=0.650095
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027441Jy  sigma=0.650095
! Fit after  self-cal, rms=0.027423Jy  sigma=0.649730
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7998 mas, bmaj=1.981 mas, bpa=-1.386 degrees
! Estimated noise=0.291652 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.420869 Jy
! Component: 100  -  total flux cleaned = 0.575035 Jy
! Component: 150  -  total flux cleaned = 0.653469 Jy
! Component: 200  -  total flux cleaned = 0.697316 Jy
! Total flux subtracted in 200 components = 0.697316 Jy
! Clean residual min=-0.009014 max=0.021715 Jy/beam
! Clean residual mean=-0.000015 rms=0.001885 Jy/beam
! Combined flux in latest and established models = 0.697316 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.697316 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=2.409 mas, bpa=-0.3106 degrees
! Estimated noise=0.172805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320698 Jy
! Component: 100  -  total flux cleaned = 0.0509375 Jy
! Component: 150  -  total flux cleaned = 0.0647566 Jy
! Component: 200  -  total flux cleaned = 0.0753381 Jy
! Total flux subtracted in 200 components = 0.0753381 Jy
! Clean residual min=-0.004031 max=0.006179 Jy/beam
! Clean residual mean=0.000001 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.772654 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 55 components and 0.772654 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00833739 Jy
! Component: 100  -  total flux cleaned = 0.0150643 Jy
! Component: 150  -  total flux cleaned = 0.0206655 Jy
! Component: 200  -  total flux cleaned = 0.0254232 Jy
! Total flux subtracted in 200 components = 0.0254232 Jy
! Clean residual min=-0.002562 max=0.003134 Jy/beam
! Clean residual mean=0.000004 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.798077 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 101 components and 0.798077 Jy
! Inverting map 
! Added new window around map position (-11.4, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409084 Jy
! Component: 100  -  total flux cleaned = 0.00759726 Jy
! Component: 150  -  total flux cleaned = 0.0106505 Jy
! Component: 200  -  total flux cleaned = 0.0133313 Jy
! Total flux subtracted in 200 components = 0.0133313 Jy
! Clean residual min=-0.001882 max=0.001959 Jy/beam
! Clean residual mean=0.000004 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.811408 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 140 components and 0.811408 Jy
! Inverting map 
! Added new window around map position (3, -18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241311 Jy
! Component: 100  -  total flux cleaned = 0.00412594 Jy
! Component: 150  -  total flux cleaned = 0.00560097 Jy
! Component: 200  -  total flux cleaned = 0.00688131 Jy
! Total flux subtracted in 200 components = 0.00688131 Jy
! Clean residual min=-0.001579 max=0.001627 Jy/beam
! Clean residual mean=0.000004 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.81829 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 175 components and 0.81829 Jy
! Inverting map 
! Added new window around map position (9.4, -16.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150214 Jy
! Component: 100  -  total flux cleaned = 0.00255134 Jy
! Component: 150  -  total flux cleaned = 0.00352351 Jy
! Component: 200  -  total flux cleaned = 0.00448169 Jy
! Total flux subtracted in 200 components = 0.00448169 Jy
! Clean residual min=-0.001419 max=0.001191 Jy/beam
! Clean residual mean=0.000003 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.822771 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 195 components and 0.822771 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.279 mas, bmaj=3.896 mas, bpa=-0.008152 degrees
! Estimated noise=0.20953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017442 Jy
! Component: 100  -  total flux cleaned = 0.00307067 Jy
! Component: 150  -  total flux cleaned = 0.00418885 Jy
! Component: 200  -  total flux cleaned = 0.0051457 Jy
! Total flux subtracted in 200 components = 0.0051457 Jy
! Clean residual min=-0.001401 max=0.001051 Jy/beam
! Clean residual mean=0.000005 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.827917 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000706916 Jy
! Component: 100  -  total flux cleaned = 0.0012483 Jy
! Component: 150  -  total flux cleaned = 0.00176321 Jy
! Component: 200  -  total flux cleaned = 0.00222616 Jy
! Total flux subtracted in 200 components = 0.00222616 Jy
! Clean residual min=-0.001336 max=0.001031 Jy/beam
! Clean residual mean=0.000005 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.830143 Jy
! Adding 107 model components to the UV plane model.
! The established model now contains 294 components and 0.830143 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=2.409 mas, bpa=-0.3106 degrees
! Estimated noise=0.172805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000215957 Jy
! Component: 100  -  total flux cleaned = -0.000336313 Jy
! Component: 150  -  total flux cleaned = -0.00029805 Jy
! Component: 200  -  total flux cleaned = -0.000298053 Jy
! Total flux subtracted in 200 components = -0.000298053 Jy
! Clean residual min=-0.001172 max=0.001084 Jy/beam
! Clean residual mean=0.000002 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.829845 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 313 components and 0.829845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027404Jy  sigma=0.650030
! Fit after  self-cal, rms=0.027373Jy  sigma=0.648722
wmodel /J1408-0752_X_map.mod
! wmodel: Unable to open new model file: /J1408-0752_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1408-0752_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.043 x 2.409 at -0.3106 degrees (North through East)
! Clean map  min=-0.0013644  max=0.59355 Jy/beam
! Writing clean map to FITS file: .//J1408-0752_X_map.fits
wmodel .//J1408-0752_X_map.mod
! Writing 313 model components to file: .//J1408-0752_X_map.mod
wobs   .//J1408-0752_X_uvs.fits
! Writing UV FITS file: .//J1408-0752_X_uvs.fits
wwins  .//J1408-0752_X_map.win
! wwins: Wrote 13 windows to .//J1408-0752_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.593547 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000246317 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.124498 0.124498 0.248996 0.497991 0.995982 1.99196 3.98393 7.96786 15.9357 31.8714 63.7429
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.593 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2409.68 
quit
! Quitting program
! Log file .//J1408-0752_X_dfm.log closed on Wed Nov 16 11:59:19 2016