! Started logfile: .//J1302+5748_X_dfm.log on Wed Nov 16 11:58:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1302+5748_X_uva.fits
! Reading UV FITS file: .//J1302+5748_X_uva.fits
! AN table 1: 25 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.822222 visibilities/baseline/integration-bin.
! Found source: J1302+5748
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 5920 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1302+5748_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.162519Jy  sigma=36.764337
! Fit after  self-cal, rms=0.375607Jy  sigma=11.968952
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7603 mas, bmaj=3.1 mas, bpa=47.29 degrees
! Estimated noise=0.541724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.488108 Jy
! Component: 100  -  total flux cleaned = 0.594547 Jy
! Total flux subtracted in 100 components = 0.594547 Jy
! Clean residual min=-0.014688 max=0.029689 Jy/beam
! Clean residual mean=0.000091 rms=0.004308 Jy/beam
! Combined flux in latest and established models = 0.594547 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.594547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060710Jy  sigma=1.809127
! Fit after  self-cal, rms=0.060707Jy  sigma=1.809067
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270155 Jy
! Component: 100  -  total flux cleaned = 0.0404937 Jy
! Total flux subtracted in 100 components = 0.0404937 Jy
! Clean residual min=-0.015210 max=0.017687 Jy/beam
! Clean residual mean=0.000056 rms=0.003124 Jy/beam
! Combined flux in latest and established models = 0.635041 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.635041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046423Jy  sigma=1.378181
! Fit after  self-cal, rms=0.046421Jy  sigma=1.378125
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9821 mas, bmaj=3.114 mas, bpa=46.86 degrees
! Estimated noise=0.296011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100865 Jy
! Component: 100  -  total flux cleaned = 0.016682 Jy
! Component: 150  -  total flux cleaned = 0.0215217 Jy
! Component: 200  -  total flux cleaned = 0.0251282 Jy
! Total flux subtracted in 200 components = 0.0251282 Jy
! Clean residual min=-0.012164 max=0.014575 Jy/beam
! Clean residual mean=0.000185 rms=0.003141 Jy/beam
! Combined flux in latest and established models = 0.660169 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 0.660169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043564Jy  sigma=1.293357
! Fit after  self-cal, rms=0.043552Jy  sigma=1.293086
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9821 x 3.114 at 46.86 degrees (North through East)
! Clean map  min=-0.011541  max=0.62208 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.97     KP        1.06     LA        0.94     
!   MK        1.01     NL        1.04     OV        0.99     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.99     KP        1.06     LA        0.95     
!   MK        1.02     NL        1.04     OV        0.99     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.98     KP        1.06     LA        0.94     
!   MK        1.02     NL        1.05     OV        1.00     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.98     KP        1.06     LA        0.94     
!   MK        1.03     NL        1.04     OV        0.99     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.99     KP        1.06     LA        0.93     
!   MK        1.03     NL        1.04     OV        1.00     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.99     KP        1.06     LA        0.93     
!   MK        1.04     NL        1.04     OV        1.00     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        0.98     KP        1.06     LA        0.94     
!   MK        1.03     NL        1.05     OV        1.00     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.00     KP        1.06     LA        0.94     
!   MK        1.02     NL        1.05     OV        0.99     PT        0.97     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.043552Jy  sigma=1.293086
! Fit after  self-cal, rms=0.029717Jy  sigma=0.815255
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9782 mas, bmaj=3.116 mas, bpa=46.89 degrees
! Estimated noise=0.295649 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00547139 Jy
! Component: 100  -  total flux cleaned = -0.00578964 Jy
! Component: 150  -  total flux cleaned = -0.00587467 Jy
! Component: 200  -  total flux cleaned = -0.00603399 Jy
! Total flux subtracted in 200 components = -0.00603399 Jy
! Clean residual min=-0.003962 max=0.003952 Jy/beam
! Clean residual mean=0.000003 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.654135 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 37 components and 0.654135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028069Jy  sigma=0.765608
! Fit after  self-cal, rms=0.028057Jy  sigma=0.765372
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028057Jy  sigma=0.765372
! Fit after  self-cal, rms=0.027562Jy  sigma=0.747585
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9773 mas, bmaj=3.115 mas, bpa=46.94 degrees
! Estimated noise=0.29562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00336937 Jy
! Component: 100  -  total flux cleaned = -0.00381004 Jy
! Component: 150  -  total flux cleaned = -0.00430147 Jy
! Component: 200  -  total flux cleaned = -0.00465139 Jy
! Total flux subtracted in 200 components = -0.00465139 Jy
! Clean residual min=-0.003125 max=0.003137 Jy/beam
! Clean residual mean=0.000006 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.649484 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.649484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026858Jy  sigma=0.725477
! Fit after  self-cal, rms=0.026854Jy  sigma=0.725394
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284774 Jy
! Component: 100  -  total flux cleaned = -0.00046422 Jy
! Component: 150  -  total flux cleaned = -0.000588306 Jy
! Component: 200  -  total flux cleaned = -0.000664887 Jy
! Total flux subtracted in 200 components = -0.000664887 Jy
! Clean residual min=-0.003044 max=0.003075 Jy/beam
! Clean residual mean=0.000008 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.648819 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.648819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026729Jy  sigma=0.721184
! Fit after  self-cal, rms=0.026726Jy  sigma=0.721149
! Inverting map 
! Added new window around map position (-29.4, -34.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141392 Jy
! Component: 100  -  total flux cleaned = 0.00160767 Jy
! Component: 150  -  total flux cleaned = 0.00176272 Jy
! Component: 200  -  total flux cleaned = 0.00170625 Jy
! Total flux subtracted in 200 components = 0.00170625 Jy
! Clean residual min=-0.002457 max=0.002411 Jy/beam
! Clean residual mean=0.000011 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.650525 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 88 components and 0.650525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026140Jy  sigma=0.703376
! Fit after  self-cal, rms=0.026124Jy  sigma=0.702729
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026124Jy  sigma=0.702729
! Fit after  self-cal, rms=0.025981Jy  sigma=0.697292
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9769 mas, bmaj=3.116 mas, bpa=46.97 degrees
! Estimated noise=0.295647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00171694 Jy
! Component: 100  -  total flux cleaned = -0.00127933 Jy
! Component: 150  -  total flux cleaned = -0.00127745 Jy
! Component: 200  -  total flux cleaned = -0.0011932 Jy
! Total flux subtracted in 200 components = -0.0011932 Jy
! Clean residual min=-0.002080 max=0.001960 Jy/beam
! Clean residual mean=0.000008 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.649332 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 97 components and 0.649332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025695Jy  sigma=0.689049
! Fit after  self-cal, rms=0.025694Jy  sigma=0.688987
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.90945e-05 Jy
! Component: 100  -  total flux cleaned = -0.000153982 Jy
! Component: 150  -  total flux cleaned = -0.000296334 Jy
! Component: 200  -  total flux cleaned = -0.00039717 Jy
! Total flux subtracted in 200 components = -0.00039717 Jy
! Clean residual min=-0.001950 max=0.001844 Jy/beam
! Clean residual mean=0.000009 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.648935 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 104 components and 0.648935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025599Jy  sigma=0.686000
! Fit after  self-cal, rms=0.025599Jy  sigma=0.685971
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025599Jy  sigma=0.685971
! Fit after  self-cal, rms=0.025559Jy  sigma=0.684149
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.984 mas, bmaj=3.298 mas, bpa=45.75 degrees
! Estimated noise=0.354335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133602 Jy
! Component: 100  -  total flux cleaned = -0.0013059 Jy
! Component: 150  -  total flux cleaned = -0.00118512 Jy
! Component: 200  -  total flux cleaned = -0.0011058 Jy
! Total flux subtracted in 200 components = -0.0011058 Jy
! Clean residual min=-0.001527 max=0.001483 Jy/beam
! Clean residual mean=0.000022 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.647829 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 118 components and 0.647829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025493Jy  sigma=0.681877
! Fit after  self-cal, rms=0.025494Jy  sigma=0.681837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125484 Jy
! Component: 100  -  total flux cleaned = 0.000167894 Jy
! Component: 150  -  total flux cleaned = 0.000207828 Jy
! Component: 200  -  total flux cleaned = 0.000207599 Jy
! Total flux subtracted in 200 components = 0.000207599 Jy
! Clean residual min=-0.001441 max=0.001374 Jy/beam
! Clean residual mean=0.000022 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.648037 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 127 components and 0.648037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025474Jy  sigma=0.681195
! Fit after  self-cal, rms=0.025473Jy  sigma=0.681167
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9768 mas, bmaj=3.116 mas, bpa=46.98 degrees
! Estimated noise=0.295644 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9768 x 3.116 at 46.98 degrees (North through East)
! Clean map  min=-0.0018157  max=0.62286 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025473Jy  sigma=0.681167
! Fit after  self-cal, rms=0.023798Jy  sigma=0.630127
! Inverting map and beam 
! Estimated beam: bmin=0.9772 mas, bmaj=3.116 mas, bpa=46.98 degrees
! Estimated noise=0.295864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000995796 Jy
! Component: 100  -  total flux cleaned = -0.00120752 Jy
! Component: 150  -  total flux cleaned = -0.00136287 Jy
! Component: 200  -  total flux cleaned = -0.00150197 Jy
! Total flux subtracted in 200 components = -0.00150197 Jy
! Clean residual min=-0.001472 max=0.001450 Jy/beam
! Clean residual mean=0.000012 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.646535 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 134 components and 0.646535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023689Jy  sigma=0.626647
! Fit after  self-cal, rms=0.023688Jy  sigma=0.626641
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012253 Jy
! Component: 100  -  total flux cleaned = -0.000213504 Jy
! Component: 150  -  total flux cleaned = -0.000277501 Jy
! Component: 200  -  total flux cleaned = -0.000298152 Jy
! Total flux subtracted in 200 components = -0.000298152 Jy
! Clean residual min=-0.001456 max=0.001373 Jy/beam
! Clean residual mean=0.000013 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.646237 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 149 components and 0.646237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023652Jy  sigma=0.625406
! Fit after  self-cal, rms=0.023651Jy  sigma=0.625398
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023651Jy  sigma=0.625398
! Fit after  self-cal, rms=0.023633Jy  sigma=0.624527
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7576 mas, bmaj=3.097 mas, bpa=47.39 degrees
! Estimated noise=0.538925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.48572 Jy
! Component: 100  -  total flux cleaned = 0.591638 Jy
! Component: 150  -  total flux cleaned = 0.614948 Jy
! Component: 200  -  total flux cleaned = 0.622644 Jy
! Total flux subtracted in 200 components = 0.622644 Jy
! Clean residual min=-0.004440 max=0.005257 Jy/beam
! Clean residual mean=0.000018 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.622644 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.622644 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=3.116 mas, bpa=46.99 degrees
! Estimated noise=0.295914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00670012 Jy
! Component: 100  -  total flux cleaned = 0.0105339 Jy
! Component: 150  -  total flux cleaned = 0.0131399 Jy
! Component: 200  -  total flux cleaned = 0.0147266 Jy
! Total flux subtracted in 200 components = 0.0147266 Jy
! Clean residual min=-0.002164 max=0.002429 Jy/beam
! Clean residual mean=0.000028 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.637371 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 41 components and 0.637371 Jy
! Inverting map 
! Added new window around map position (2.6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203393 Jy
! Component: 100  -  total flux cleaned = 0.00296715 Jy
! Component: 150  -  total flux cleaned = 0.0036523 Jy
! Component: 200  -  total flux cleaned = 0.00432075 Jy
! Total flux subtracted in 200 components = 0.00432075 Jy
! Clean residual min=-0.001563 max=0.001593 Jy/beam
! Clean residual mean=0.000013 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.641692 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 75 components and 0.641692 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.986 mas, bmaj=3.299 mas, bpa=45.78 degrees
! Estimated noise=0.354422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151499 Jy
! Component: 100  -  total flux cleaned = 0.00259596 Jy
! Component: 150  -  total flux cleaned = 0.00335719 Jy
! Component: 200  -  total flux cleaned = 0.00384328 Jy
! Total flux subtracted in 200 components = 0.00384328 Jy
! Clean residual min=-0.001079 max=0.000918 Jy/beam
! Clean residual mean=0.000014 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.645535 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247667 Jy
! Component: 100  -  total flux cleaned = 0.000469489 Jy
! Component: 150  -  total flux cleaned = 0.000630094 Jy
! Component: 200  -  total flux cleaned = 0.000739392 Jy
! Total flux subtracted in 200 components = 0.000739392 Jy
! Clean residual min=-0.000968 max=0.000820 Jy/beam
! Clean residual mean=0.000010 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.646275 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 148 components and 0.646275 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.977 mas, bmaj=3.116 mas, bpa=46.99 degrees
! Estimated noise=0.295914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000399831 Jy
! Component: 100  -  total flux cleaned = -0.000400272 Jy
! Component: 150  -  total flux cleaned = -0.000366259 Jy
! Component: 200  -  total flux cleaned = -0.000333248 Jy
! Total flux subtracted in 200 components = -0.000333248 Jy
! Clean residual min=-0.001220 max=0.001072 Jy/beam
! Clean residual mean=0.000003 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.645942 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 176 components and 0.645942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023599Jy  sigma=0.621681
! Fit after  self-cal, rms=0.023577Jy  sigma=0.620830
wmodel /J1302+5748_X_map.mod
! wmodel: Unable to open new model file: /J1302+5748_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1302+5748_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.977 x 3.116 at 46.99 degrees (North through East)
! Clean map  min=-0.0016426  max=0.62242 Jy/beam
! Writing clean map to FITS file: .//J1302+5748_X_map.fits
wmodel .//J1302+5748_X_map.mod
! Writing 176 model components to file: .//J1302+5748_X_map.mod
wobs   .//J1302+5748_X_uvs.fits
! Writing UV FITS file: .//J1302+5748_X_uvs.fits
wwins  .//J1302+5748_X_map.win
! wwins: Wrote 4 windows to .//J1302+5748_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.622417 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000268465 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.129398 0.129398 0.258796 0.517593 1.03519 2.07037 4.14074 8.28148 16.563 33.1259 66.2519
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.622 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2318.43 
quit
! Quitting program
! Log file .//J1302+5748_X_dfm.log closed on Wed Nov 16 11:58:33 2016