! Started logfile: .//J1248+2022_X_dfm.log on Wed Nov 16 11:58:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1248+2022_X_uvm.fits
! Reading UV FITS file: .//J1248+2022_X_uvm.fits
! AN table 1: 160 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.653611 visibilities/baseline/integration-bin.
! Found source: J1248+2022
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 37648 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1248+2022_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001815Jy  sigma=30.801262
! Fit after  self-cal, rms=0.955014Jy  sigma=29.367051
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7859 mas, bmaj=1.651 mas, bpa=-0.3054 degrees
! Estimated noise=0.242089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0348719 Jy
! Component: 100  -  total flux cleaned = 0.0427173 Jy
! Total flux subtracted in 100 components = 0.0427173 Jy
! Clean residual min=-0.001354 max=0.002767 Jy/beam
! Clean residual mean=-0.000002 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.0427173 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0427173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030086Jy  sigma=0.719818
! Fit after  self-cal, rms=0.029421Jy  sigma=0.703666
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317802 Jy
! Component: 100  -  total flux cleaned = 0.00464375 Jy
! Total flux subtracted in 100 components = 0.00464375 Jy
! Clean residual min=-0.001234 max=0.001568 Jy/beam
! Clean residual mean=-0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0473611 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.0473611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029068Jy  sigma=0.691592
! Fit after  self-cal, rms=0.029068Jy  sigma=0.691420
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.019 mas, bpa=1.379 degrees
! Estimated noise=0.12221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192743 Jy
! Component: 100  -  total flux cleaned = 0.00273971 Jy
! Component: 150  -  total flux cleaned = 0.00306577 Jy
! Component: 200  -  total flux cleaned = 0.00329179 Jy
! Total flux subtracted in 200 components = 0.00329179 Jy
! Clean residual min=-0.001167 max=0.001077 Jy/beam
! Clean residual mean=-0.000002 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.0506529 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 46 components and 0.0506529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028933Jy  sigma=0.686153
! Fit after  self-cal, rms=0.028924Jy  sigma=0.685754
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 2.019 at 1.379 degrees (North through East)
! Clean map  min=-0.0010955  max=0.044959 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        1.08     
!   LA        0.96     MK        1.03     NL        1.07     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.01     KP        1.05     
!   LA        0.96     MK        1.00     NL        1.07     OV        0.99     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.01     KP        1.06     
!   LA        0.98     MK        1.04     NL        1.09     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.03     KP        1.07     
!   LA        0.97     MK        1.06     NL        1.05     OV        0.99     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.01     KP        1.04     
!   LA        0.94     MK        1.01     NL        1.05     OV        0.99     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.00     KP        1.04     
!   LA        0.95     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.94     KP        1.07     
!   LA        0.93     MK        0.98     NL        1.08     OV        0.98     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.00     KP        1.06     
!   LA        0.95     MK        1.00     NL        1.03     OV        0.98     
!   PT        0.95     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.028924Jy  sigma=0.685754
! Fit after  self-cal, rms=0.028759Jy  sigma=0.681924
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.023 mas, bpa=1.878 degrees
! Estimated noise=0.122714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421673 Jy
! Component: 100  -  total flux cleaned = 0.00042404 Jy
! Component: 150  -  total flux cleaned = 0.000441663 Jy
! Component: 200  -  total flux cleaned = 0.000473761 Jy
! Total flux subtracted in 200 components = 0.000473761 Jy
! Clean residual min=-0.000686 max=0.000750 Jy/beam
! Clean residual mean=-0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0511266 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 64 components and 0.0511266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028726Jy  sigma=0.680616
! Fit after  self-cal, rms=0.028719Jy  sigma=0.680500
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028719Jy  sigma=0.680500
! Fit after  self-cal, rms=0.028668Jy  sigma=0.675879
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.006 mas, bpa=1.349 degrees
! Estimated noise=0.122718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.84744e-05 Jy
! Component: 100  -  total flux cleaned = -3.88565e-05 Jy
! Component: 150  -  total flux cleaned = -5.63839e-05 Jy
! Component: 200  -  total flux cleaned = -4.91199e-05 Jy
! Total flux subtracted in 200 components = -4.91199e-05 Jy
! Clean residual min=-0.000480 max=0.000586 Jy/beam
! Clean residual mean=0.000000 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.0510775 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 80 components and 0.0510775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028660Jy  sigma=0.675613
! Fit after  self-cal, rms=0.028663Jy  sigma=0.675581
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-45.4, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000519472 Jy
! Component: 100  -  total flux cleaned = 0.000815671 Jy
! Component: 150  -  total flux cleaned = 0.00101521 Jy
! Component: 200  -  total flux cleaned = 0.00115461 Jy
! Total flux subtracted in 200 components = 0.00115461 Jy
! Clean residual min=-0.000470 max=0.000564 Jy/beam
! Clean residual mean=-0.000000 rms=0.000107 Jy/beam
! Combined flux in latest and established models = 0.0522321 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 0.0522321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028651Jy  sigma=0.675184
! Fit after  self-cal, rms=0.028650Jy  sigma=0.675156
! Inverting map 
! Added new window around map position (34.6, -48.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497613 Jy
! Component: 100  -  total flux cleaned = 0.000601717 Jy
! Component: 150  -  total flux cleaned = 0.000688225 Jy
! Component: 200  -  total flux cleaned = 0.000737141 Jy
! Total flux subtracted in 200 components = 0.000737141 Jy
! Clean residual min=-0.000431 max=0.000412 Jy/beam
! Clean residual mean=0.000000 rms=0.000102 Jy/beam
! Combined flux in latest and established models = 0.0529693 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 116 components and 0.0529693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028641Jy  sigma=0.674793
! Fit after  self-cal, rms=0.028640Jy  sigma=0.674770
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028640Jy  sigma=0.674770
! Fit after  self-cal, rms=0.028654Jy  sigma=0.674694
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.004 mas, bpa=1.377 degrees
! Estimated noise=0.122739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106233 Jy
! Component: 100  -  total flux cleaned = 0.000120569 Jy
! Component: 150  -  total flux cleaned = 0.000140852 Jy
! Component: 200  -  total flux cleaned = 0.000166249 Jy
! Total flux subtracted in 200 components = 0.000166249 Jy
! Clean residual min=-0.000429 max=0.000397 Jy/beam
! Clean residual mean=0.000000 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0531355 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 124 components and 0.0531355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028650Jy  sigma=0.674572
! Fit after  self-cal, rms=0.028650Jy  sigma=0.674570
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.87237e-05 Jy
! Component: 100  -  total flux cleaned = 6.77813e-05 Jy
! Component: 150  -  total flux cleaned = 8.45169e-05 Jy
! Component: 200  -  total flux cleaned = 0.00011134 Jy
! Total flux subtracted in 200 components = 0.00011134 Jy
! Clean residual min=-0.000425 max=0.000390 Jy/beam
! Clean residual mean=0.000000 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0532469 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 130 components and 0.0532468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028648Jy  sigma=0.674501
! Fit after  self-cal, rms=0.028648Jy  sigma=0.674499
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028648Jy  sigma=0.674499
! Fit after  self-cal, rms=0.028664Jy  sigma=0.674487
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.138 mas, bmaj=2.984 mas, bpa=0.8653 degrees
! Estimated noise=0.149939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109895 Jy
! Component: 100  -  total flux cleaned = 0.000134462 Jy
! Component: 150  -  total flux cleaned = 0.000161787 Jy
! Component: 200  -  total flux cleaned = 0.000186569 Jy
! Total flux subtracted in 200 components = 0.000186569 Jy
! Clean residual min=-0.000434 max=0.000517 Jy/beam
! Clean residual mean=0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0534334 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 156 components and 0.0534334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028663Jy  sigma=0.674447
! Fit after  self-cal, rms=0.028663Jy  sigma=0.674443
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.8, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474119 Jy
! Component: 100  -  total flux cleaned = 0.000655858 Jy
! Component: 150  -  total flux cleaned = 0.000648924 Jy
! Component: 200  -  total flux cleaned = 0.000621146 Jy
! Total flux subtracted in 200 components = 0.000621146 Jy
! Clean residual min=-0.000366 max=0.000392 Jy/beam
! Clean residual mean=0.000001 rms=0.000100 Jy/beam
! Combined flux in latest and established models = 0.0540546 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 191 components and 0.0540546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028659Jy  sigma=0.674222
! Fit after  self-cal, rms=0.028658Jy  sigma=0.674209
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.003 mas, bpa=1.38 degrees
! Estimated noise=0.122782 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 2.003 at 1.38 degrees (North through East)
! Clean map  min=-0.00037839  max=0.045088 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7901 mas, bmaj=1.641 mas, bpa=-0.6904 degrees
! Estimated noise=0.239505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345927 Jy
! Component: 100  -  total flux cleaned = 0.0423963 Jy
! Component: 150  -  total flux cleaned = 0.0453537 Jy
! Component: 200  -  total flux cleaned = 0.0470182 Jy
! Total flux subtracted in 200 components = 0.0470182 Jy
! Clean residual min=-0.000851 max=0.000958 Jy/beam
! Clean residual mean=-0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0470182 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0470182 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.003 mas, bpa=1.38 degrees
! Estimated noise=0.122782 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159189 Jy
! Component: 100  -  total flux cleaned = 0.00252719 Jy
! Component: 150  -  total flux cleaned = 0.00323536 Jy
! Component: 200  -  total flux cleaned = 0.00382146 Jy
! Total flux subtracted in 200 components = 0.00382146 Jy
! Clean residual min=-0.000571 max=0.000428 Jy/beam
! Clean residual mean=-0.000000 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0508397 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 37 components and 0.0508397 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.138 mas, bmaj=2.984 mas, bpa=0.8653 degrees
! Estimated noise=0.149939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000721718 Jy
! Component: 100  -  total flux cleaned = 0.00124596 Jy
! Component: 150  -  total flux cleaned = 0.00166303 Jy
! Component: 200  -  total flux cleaned = 0.00197733 Jy
! Total flux subtracted in 200 components = 0.00197733 Jy
! Clean residual min=-0.000494 max=0.000438 Jy/beam
! Clean residual mean=0.000001 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.052817 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197811 Jy
! Component: 100  -  total flux cleaned = 0.000322452 Jy
! Component: 150  -  total flux cleaned = 0.000406971 Jy
! Component: 200  -  total flux cleaned = 0.000467488 Jy
! Total flux subtracted in 200 components = 0.000467488 Jy
! Clean residual min=-0.000437 max=0.000409 Jy/beam
! Clean residual mean=0.000001 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0532845 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 123 components and 0.0532845 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.003 mas, bpa=1.38 degrees
! Estimated noise=0.122782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.87515e-05 Jy
! Component: 100  -  total flux cleaned = 0.000124724 Jy
! Component: 150  -  total flux cleaned = 0.000113774 Jy
! Component: 200  -  total flux cleaned = 8.53844e-05 Jy
! Total flux subtracted in 200 components = 8.53844e-05 Jy
! Clean residual min=-0.000430 max=0.000374 Jy/beam
! Clean residual mean=0.000000 rms=0.000094 Jy/beam
! Combined flux in latest and established models = 0.0533699 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 147 components and 0.0533699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028667Jy  sigma=0.674504
! Fit after  self-cal, rms=0.028663Jy  sigma=0.674448
wmodel /J1248+2022_X_map.mod
! wmodel: Unable to open new model file: /J1248+2022_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1248+2022_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 2.003 at 1.38 degrees (North through East)
! Clean map  min=-0.00040312  max=0.045179 Jy/beam
! Writing clean map to FITS file: .//J1248+2022_X_map.fits
wmodel .//J1248+2022_X_map.mod
! Writing 147 model components to file: .//J1248+2022_X_map.mod
wobs   .//J1248+2022_X_uvs.fits
! Writing UV FITS file: .//J1248+2022_X_uvs.fits
wwins  .//J1248+2022_X_map.win
! wwins: Wrote 6 windows to .//J1248+2022_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0451793 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.31385e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.618459 0.618459 1.23692 2.47383 4.94767 9.89534 19.7907 39.5814 79.1627
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.045 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  485.076 
quit
! Quitting program
! Log file .//J1248+2022_X_dfm.log closed on Wed Nov 16 11:58:15 2016