! Started logfile: .//J1241+1649_X_dfm.log on Wed Nov 16 11:58:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1241+1649_X_uvm.fits
! Reading UV FITS file: .//J1241+1649_X_uvm.fits
! AN table 1: 77 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.891198 visibilities/baseline/integration-bin.
! Found source: J1241+1649
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 24704 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1241+1649_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009105Jy  sigma=30.854050
! Fit after  self-cal, rms=0.880805Jy  sigma=26.939109
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8211 mas, bmaj=1.945 mas, bpa=12.07 degrees
! Estimated noise=0.25466 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.092312 Jy
! Component: 100  -  total flux cleaned = 0.112442 Jy
! Total flux subtracted in 100 components = 0.112442 Jy
! Clean residual min=-0.002363 max=0.005629 Jy/beam
! Clean residual mean=-0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.112442 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.112442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028966Jy  sigma=0.801633
! Fit after  self-cal, rms=0.028913Jy  sigma=0.801138
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513322 Jy
! Component: 100  -  total flux cleaned = 0.00777718 Jy
! Total flux subtracted in 100 components = 0.00777718 Jy
! Clean residual min=-0.002372 max=0.003073 Jy/beam
! Clean residual mean=-0.000002 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.120219 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.120219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027691Jy  sigma=0.761646
! Fit after  self-cal, rms=0.027683Jy  sigma=0.761459
! Inverting map 
! Added new window around map position (-2.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259043 Jy
! Component: 100  -  total flux cleaned = 0.00337218 Jy
! Total flux subtracted in 100 components = 0.00337218 Jy
! Clean residual min=-0.002129 max=0.002716 Jy/beam
! Clean residual mean=-0.000002 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.123591 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.123591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027371Jy  sigma=0.751247
! Fit after  self-cal, rms=0.027346Jy  sigma=0.750547
! Inverting map 
! Added new window around map position (1.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261844 Jy
! Component: 100  -  total flux cleaned = 0.00431432 Jy
! Total flux subtracted in 100 components = 0.00431432 Jy
! Clean residual min=-0.002237 max=0.001532 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.127906 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.127906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026976Jy  sigma=0.738707
! Fit after  self-cal, rms=0.026960Jy  sigma=0.738207
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.286 mas, bpa=8.888 degrees
! Estimated noise=0.150366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202142 Jy
! Component: 100  -  total flux cleaned = 0.0032416 Jy
! Component: 150  -  total flux cleaned = 0.00392252 Jy
! Component: 200  -  total flux cleaned = 0.00435073 Jy
! Total flux subtracted in 200 components = 0.00435073 Jy
! Clean residual min=-0.001554 max=0.001606 Jy/beam
! Clean residual mean=-0.000006 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.132256 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 45 components and 0.132256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026769Jy  sigma=0.732448
! Fit after  self-cal, rms=0.026762Jy  sigma=0.732245
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.076 x 2.286 at 8.888 degrees (North through East)
! Clean map  min=-0.0014106  max=0.11713 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.01     KP        1.06     
!   LA        0.97     MK        0.99     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.02     KP        1.06     
!   LA        0.97     MK        0.98     NL        1.02     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.02     KP        1.06     
!   LA        0.97     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.03     KP        1.06     
!   LA        0.97     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.03     KP        1.04     
!   LA        0.97     MK        1.00     NL        1.01     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.02     KP        1.04     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.02     KP        1.07     
!   LA        0.98     MK        1.01     NL        1.01     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.03     KP        1.06     
!   LA        0.98     MK        1.00     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.026762Jy  sigma=0.732245
! Fit after  self-cal, rms=0.026196Jy  sigma=0.715221
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.294 mas, bpa=9.049 degrees
! Estimated noise=0.150625 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000774657 Jy
! Component: 100  -  total flux cleaned = -0.00107796 Jy
! Component: 150  -  total flux cleaned = -0.00126508 Jy
! Component: 200  -  total flux cleaned = -0.00135184 Jy
! Total flux subtracted in 200 components = -0.00135184 Jy
! Clean residual min=-0.001035 max=0.000962 Jy/beam
! Clean residual mean=-0.000001 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.130905 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 68 components and 0.130905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026164Jy  sigma=0.714242
! Fit after  self-cal, rms=0.026160Jy  sigma=0.714166
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026160Jy  sigma=0.714166
! Fit after  self-cal, rms=0.026034Jy  sigma=0.708700
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.294 mas, bpa=9.086 degrees
! Estimated noise=0.150602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000401195 Jy
! Component: 100  -  total flux cleaned = -0.000547444 Jy
! Component: 150  -  total flux cleaned = -0.000615028 Jy
! Component: 200  -  total flux cleaned = -0.000674981 Jy
! Total flux subtracted in 200 components = -0.000674981 Jy
! Clean residual min=-0.000823 max=0.000806 Jy/beam
! Clean residual mean=-0.000001 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.13023 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.13023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026021Jy  sigma=0.708287
! Fit after  self-cal, rms=0.026022Jy  sigma=0.708263
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.59246e-05 Jy
! Component: 100  -  total flux cleaned = -0.00011005 Jy
! Component: 150  -  total flux cleaned = -0.000133427 Jy
! Component: 200  -  total flux cleaned = -0.000148728 Jy
! Total flux subtracted in 200 components = -0.000148728 Jy
! Clean residual min=-0.000819 max=0.000789 Jy/beam
! Clean residual mean=-0.000001 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.130081 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.130081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026016Jy  sigma=0.708127
! Fit after  self-cal, rms=0.026016Jy  sigma=0.708120
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026016Jy  sigma=0.708120
! Fit after  self-cal, rms=0.025933Jy  sigma=0.702505
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.294 mas, bpa=9.098 degrees
! Estimated noise=0.150475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014233 Jy
! Component: 100  -  total flux cleaned = -0.000173144 Jy
! Component: 150  -  total flux cleaned = -0.000181713 Jy
! Component: 200  -  total flux cleaned = -0.000174047 Jy
! Total flux subtracted in 200 components = -0.000174047 Jy
! Clean residual min=-0.000581 max=0.000743 Jy/beam
! Clean residual mean=-0.000002 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.129907 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.129907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025926Jy  sigma=0.702277
! Fit after  self-cal, rms=0.025928Jy  sigma=0.702264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000693555 Jy
! Component: 100  -  total flux cleaned = 0.00110731 Jy
! Component: 150  -  total flux cleaned = 0.00141177 Jy
! Component: 200  -  total flux cleaned = 0.00154895 Jy
! Total flux subtracted in 200 components = 0.00154895 Jy
! Clean residual min=-0.000522 max=0.000565 Jy/beam
! Clean residual mean=-0.000001 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.131456 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 103 components and 0.131456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025905Jy  sigma=0.701593
! Fit after  self-cal, rms=0.025904Jy  sigma=0.701573
! Inverting map 
! Added new window around map position (-1, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505267 Jy
! Component: 100  -  total flux cleaned = 0.000622017 Jy
! Component: 150  -  total flux cleaned = 0.000743809 Jy
! Component: 200  -  total flux cleaned = 0.000834181 Jy
! Total flux subtracted in 200 components = 0.000834181 Jy
! Clean residual min=-0.000478 max=0.000511 Jy/beam
! Clean residual mean=-0.000001 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.13229 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.13229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025892Jy  sigma=0.701165
! Fit after  self-cal, rms=0.025892Jy  sigma=0.701151
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025892Jy  sigma=0.701151
! Fit after  self-cal, rms=0.025856Jy  sigma=0.700796
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=3.096 mas, bpa=-2.835 degrees
! Estimated noise=0.181279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232614 Jy
! Component: 100  -  total flux cleaned = 0.000266711 Jy
! Component: 150  -  total flux cleaned = 0.000294648 Jy
! Component: 200  -  total flux cleaned = 0.000307102 Jy
! Total flux subtracted in 200 components = 0.000307102 Jy
! Clean residual min=-0.000533 max=0.000559 Jy/beam
! Clean residual mean=-0.000002 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.132597 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 143 components and 0.132597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025854Jy  sigma=0.700706
! Fit after  self-cal, rms=0.025854Jy  sigma=0.700703
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.28329e-05 Jy
! Component: 100  -  total flux cleaned = 1.8246e-05 Jy
! Component: 150  -  total flux cleaned = 9.39599e-06 Jy
! Component: 200  -  total flux cleaned = -3.03282e-06 Jy
! Total flux subtracted in 200 components = -3.03282e-06 Jy
! Clean residual min=-0.000524 max=0.000546 Jy/beam
! Clean residual mean=-0.000002 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.132594 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 152 components and 0.132594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025853Jy  sigma=0.700675
! Fit after  self-cal, rms=0.025853Jy  sigma=0.700676
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.294 mas, bpa=9.112 degrees
! Estimated noise=0.150317 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.076 x 2.294 at 9.112 degrees (North through East)
! Clean map  min=-0.00041974  max=0.11736 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8199 mas, bmaj=1.951 mas, bpa=12.15 degrees
! Estimated noise=0.254251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.092199 Jy
! Component: 100  -  total flux cleaned = 0.112307 Jy
! Component: 150  -  total flux cleaned = 0.118079 Jy
! Component: 200  -  total flux cleaned = 0.12114 Jy
! Total flux subtracted in 200 components = 0.12114 Jy
! Clean residual min=-0.001015 max=0.001633 Jy/beam
! Clean residual mean=-0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.12114 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.12114 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.294 mas, bpa=9.112 degrees
! Estimated noise=0.150317 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282178 Jy
! Component: 100  -  total flux cleaned = 0.00456671 Jy
! Component: 150  -  total flux cleaned = 0.0057572 Jy
! Component: 200  -  total flux cleaned = 0.00669642 Jy
! Total flux subtracted in 200 components = 0.00669642 Jy
! Clean residual min=-0.000624 max=0.000836 Jy/beam
! Clean residual mean=-0.000003 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.127837 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 43 components and 0.127837 Jy
! Inverting map 
! Added new window around map position (3, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000869879 Jy
! Component: 100  -  total flux cleaned = 0.00154783 Jy
! Component: 150  -  total flux cleaned = 0.00213363 Jy
! Component: 200  -  total flux cleaned = 0.00264309 Jy
! Total flux subtracted in 200 components = 0.00264309 Jy
! Clean residual min=-0.000487 max=0.000537 Jy/beam
! Clean residual mean=-0.000002 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.13048 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 68 components and 0.13048 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=3.096 mas, bpa=-2.835 degrees
! Estimated noise=0.181279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000582074 Jy
! Component: 100  -  total flux cleaned = 0.00100699 Jy
! Component: 150  -  total flux cleaned = 0.00125465 Jy
! Component: 200  -  total flux cleaned = 0.00144439 Jy
! Total flux subtracted in 200 components = 0.00144439 Jy
! Clean residual min=-0.000532 max=0.000530 Jy/beam
! Clean residual mean=-0.000003 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.131924 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016609 Jy
! Component: 100  -  total flux cleaned = 0.000249955 Jy
! Component: 150  -  total flux cleaned = 0.000326364 Jy
! Component: 200  -  total flux cleaned = 0.000388598 Jy
! Total flux subtracted in 200 components = 0.000388598 Jy
! Clean residual min=-0.000509 max=0.000505 Jy/beam
! Clean residual mean=-0.000002 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.132313 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 109 components and 0.132313 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=2.294 mas, bpa=9.112 degrees
! Estimated noise=0.150317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.78658e-05 Jy
! Component: 100  -  total flux cleaned = -9.37859e-05 Jy
! Component: 150  -  total flux cleaned = -8.31045e-05 Jy
! Component: 200  -  total flux cleaned = -2.46449e-05 Jy
! Total flux subtracted in 200 components = -2.46449e-05 Jy
! Clean residual min=-0.000425 max=0.000472 Jy/beam
! Clean residual mean=-0.000001 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.132288 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 126 components and 0.132288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025853Jy  sigma=0.700694
! Fit after  self-cal, rms=0.025852Jy  sigma=0.700638
wmodel /J1241+1649_X_map.mod
! wmodel: Unable to open new model file: /J1241+1649_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1241+1649_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.076 x 2.294 at 9.112 degrees (North through East)
! Clean map  min=-0.0003978  max=0.11771 Jy/beam
! Writing clean map to FITS file: .//J1241+1649_X_map.fits
wmodel .//J1241+1649_X_map.mod
! Writing 126 model components to file: .//J1241+1649_X_map.mod
wobs   .//J1241+1649_X_uvs.fits
! Writing UV FITS file: .//J1241+1649_X_uvs.fits
wwins  .//J1241+1649_X_map.win
! wwins: Wrote 6 windows to .//J1241+1649_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.117713 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000117179 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.298638 0.298638 0.597277 1.19455 2.38911 4.77821 9.55643 19.1129 38.2257 76.4514
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.117 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1004.56 
quit
! Quitting program
! Log file .//J1241+1649_X_dfm.log closed on Wed Nov 16 11:58:06 2016