! Started logfile: .//J1225+1253_X_dfm.log on Wed Nov 16 11:57:57 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1225+1253_X_uvm.fits
! Reading UV FITS file: .//J1225+1253_X_uvm.fits
! AN table 1: 114 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.752437 visibilities/baseline/integration-bin.
! Found source: J1225+1253
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 30880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1225+1253_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008764Jy  sigma=30.439441
! Fit after  self-cal, rms=0.886162Jy  sigma=26.776437
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8152 mas, bmaj=1.937 mas, bpa=7.172 degrees
! Estimated noise=0.252448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0851576 Jy
! Component: 100  -  total flux cleaned = 0.104827 Jy
! Total flux subtracted in 100 components = 0.104827 Jy
! Clean residual min=-0.002932 max=0.007529 Jy/beam
! Clean residual mean=-0.000002 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.104827 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.104827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036808Jy  sigma=0.835316
! Fit after  self-cal, rms=0.036800Jy  sigma=0.835079
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00812791 Jy
! Component: 100  -  total flux cleaned = 0.0123157 Jy
! Total flux subtracted in 100 components = 0.0123157 Jy
! Clean residual min=-0.001872 max=0.002517 Jy/beam
! Clean residual mean=-0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.117143 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 14 components and 0.117143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034206Jy  sigma=0.735831
! Fit after  self-cal, rms=0.034204Jy  sigma=0.735660
! Inverting map 
! Added new window around map position (-5.2, 14.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267171 Jy
! Component: 100  -  total flux cleaned = 0.00442931 Jy
! Total flux subtracted in 100 components = 0.00442931 Jy
! Clean residual min=-0.001779 max=0.001896 Jy/beam
! Clean residual mean=-0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.121572 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.121572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033793Jy  sigma=0.720323
! Fit after  self-cal, rms=0.033786Jy  sigma=0.719951
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=2.322 mas, bpa=4.746 degrees
! Estimated noise=0.137285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307444 Jy
! Component: 100  -  total flux cleaned = 0.00507506 Jy
! Component: 150  -  total flux cleaned = 0.00647281 Jy
! Component: 200  -  total flux cleaned = 0.00746373 Jy
! Total flux subtracted in 200 components = 0.00746373 Jy
! Clean residual min=-0.001713 max=0.002414 Jy/beam
! Clean residual mean=-0.000007 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.129036 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 55 components and 0.129036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033439Jy  sigma=0.706742
! Fit after  self-cal, rms=0.033426Jy  sigma=0.706028
! Inverting map 
! Added new window around map position (-2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199783 Jy
! Component: 100  -  total flux cleaned = 0.00318581 Jy
! Component: 150  -  total flux cleaned = 0.00412511 Jy
! Component: 200  -  total flux cleaned = 0.00488288 Jy
! Total flux subtracted in 200 components = 0.00488288 Jy
! Clean residual min=-0.001594 max=0.001514 Jy/beam
! Clean residual mean=-0.000006 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.133919 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.133919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033282Jy  sigma=0.699852
! Fit after  self-cal, rms=0.033269Jy  sigma=0.699363
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.08 x 2.322 at 4.746 degrees (North through East)
! Clean map  min=-0.0014663  max=0.11165 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.00     KP        1.06     
!   LA        0.97     MK        1.01     NL        1.03     OV        1.02     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.00     KP        1.06     
!   LA        0.98     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        0.99     KP        1.05     
!   LA        0.97     MK        1.01     NL        1.04     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.99     KP        1.06     
!   LA        0.97     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.99     KP        1.05     
!   LA        0.98     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.00     KP        1.06     
!   LA        0.96     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.00     KP        1.05     
!   LA        0.97     MK        1.01     NL        1.02     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.00     KP        1.06     
!   LA        0.98     MK        0.99     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.033269Jy  sigma=0.699363
! Fit after  self-cal, rms=0.033026Jy  sigma=0.684049
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.333 mas, bpa=4.879 degrees
! Estimated noise=0.138047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101869 Jy
! Component: 100  -  total flux cleaned = 0.000895386 Jy
! Component: 150  -  total flux cleaned = 0.00079304 Jy
! Component: 200  -  total flux cleaned = 0.000705043 Jy
! Total flux subtracted in 200 components = 0.000705043 Jy
! Clean residual min=-0.000805 max=0.000887 Jy/beam
! Clean residual mean=-0.000002 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.134624 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 0.134624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032974Jy  sigma=0.682178
! Fit after  self-cal, rms=0.032967Jy  sigma=0.682075
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032967Jy  sigma=0.682075
! Fit after  self-cal, rms=0.032817Jy  sigma=0.678266
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.334 mas, bpa=4.815 degrees
! Estimated noise=0.138011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.95505e-05 Jy
! Component: 100  -  total flux cleaned = -0.000130187 Jy
! Component: 150  -  total flux cleaned = -0.000211101 Jy
! Component: 200  -  total flux cleaned = -0.000259833 Jy
! Total flux subtracted in 200 components = -0.000259833 Jy
! Clean residual min=-0.000758 max=0.000791 Jy/beam
! Clean residual mean=-0.000002 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.134364 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 112 components and 0.134364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032804Jy  sigma=0.677791
! Fit after  self-cal, rms=0.032805Jy  sigma=0.677765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.8, -26.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000767451 Jy
! Component: 100  -  total flux cleaned = 0.00105138 Jy
! Component: 150  -  total flux cleaned = 0.00100818 Jy
! Component: 200  -  total flux cleaned = 0.000929965 Jy
! Total flux subtracted in 200 components = 0.000929965 Jy
! Clean residual min=-0.000723 max=0.000685 Jy/beam
! Clean residual mean=-0.000001 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.135294 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 135 components and 0.135294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032782Jy  sigma=0.676835
! Fit after  self-cal, rms=0.032780Jy  sigma=0.676763
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032780Jy  sigma=0.676763
! Fit after  self-cal, rms=0.032768Jy  sigma=0.674883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.334 mas, bpa=4.787 degrees
! Estimated noise=0.138011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.66759e-05 Jy
! Component: 100  -  total flux cleaned = -0.000154231 Jy
! Component: 150  -  total flux cleaned = -0.000222566 Jy
! Component: 200  -  total flux cleaned = -0.00026711 Jy
! Total flux subtracted in 200 components = -0.00026711 Jy
! Clean residual min=-0.000598 max=0.000632 Jy/beam
! Clean residual mean=-0.000001 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.135027 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 156 components and 0.135027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032762Jy  sigma=0.674617
! Fit after  self-cal, rms=0.032762Jy  sigma=0.674602
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.4, 26.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000444143 Jy
! Component: 100  -  total flux cleaned = 0.000565005 Jy
! Component: 150  -  total flux cleaned = 0.000556594 Jy
! Component: 200  -  total flux cleaned = 0.000530859 Jy
! Total flux subtracted in 200 components = 0.000530859 Jy
! Clean residual min=-0.000588 max=0.000535 Jy/beam
! Clean residual mean=-0.000001 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.135558 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 174 components and 0.135558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032750Jy  sigma=0.674169
! Fit after  self-cal, rms=0.032750Jy  sigma=0.674151
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032750Jy  sigma=0.674151
! Fit after  self-cal, rms=0.032757Jy  sigma=0.674076
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=3.195 mas, bpa=-5.232 degrees
! Estimated noise=0.165421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195936 Jy
! Component: 100  -  total flux cleaned = -0.000276615 Jy
! Component: 150  -  total flux cleaned = -0.000327028 Jy
! Component: 200  -  total flux cleaned = -0.000363599 Jy
! Total flux subtracted in 200 components = -0.000363599 Jy
! Clean residual min=-0.000739 max=0.000742 Jy/beam
! Clean residual mean=-0.000001 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.135194 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 198 components and 0.135194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032753Jy  sigma=0.673933
! Fit after  self-cal, rms=0.032753Jy  sigma=0.673922
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.4, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000746249 Jy
! Component: 100  -  total flux cleaned = 0.00109978 Jy
! Component: 150  -  total flux cleaned = 0.00124732 Jy
! Component: 200  -  total flux cleaned = 0.00131402 Jy
! Total flux subtracted in 200 components = 0.00131402 Jy
! Clean residual min=-0.000599 max=0.000493 Jy/beam
! Clean residual mean=-0.000000 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.136508 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 250 components and 0.136508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032742Jy  sigma=0.673409
! Fit after  self-cal, rms=0.032741Jy  sigma=0.673399
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.335 mas, bpa=4.777 degrees
! Estimated noise=0.138038 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 2.335 at 4.777 degrees (North through East)
! Clean map  min=-0.00045807  max=0.11228 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.815 mas, bmaj=1.942 mas, bpa=6.896 degrees
! Estimated noise=0.259442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0857322 Jy
! Component: 100  -  total flux cleaned = 0.105396 Jy
! Component: 150  -  total flux cleaned = 0.11331 Jy
! Component: 200  -  total flux cleaned = 0.117572 Jy
! Total flux subtracted in 200 components = 0.117572 Jy
! Clean residual min=-0.001329 max=0.002236 Jy/beam
! Clean residual mean=-0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.117572 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.117572 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.335 mas, bpa=4.777 degrees
! Estimated noise=0.138038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00447716 Jy
! Component: 100  -  total flux cleaned = 0.00717176 Jy
! Component: 150  -  total flux cleaned = 0.00907634 Jy
! Component: 200  -  total flux cleaned = 0.0105106 Jy
! Total flux subtracted in 200 components = 0.0105106 Jy
! Clean residual min=-0.000707 max=0.000896 Jy/beam
! Clean residual mean=-0.000003 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.128083 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 64 components and 0.128083 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=3.195 mas, bpa=-5.232 degrees
! Estimated noise=0.165421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171717 Jy
! Component: 100  -  total flux cleaned = 0.00289332 Jy
! Component: 150  -  total flux cleaned = 0.00377324 Jy
! Component: 200  -  total flux cleaned = 0.00446684 Jy
! Total flux subtracted in 200 components = 0.00446684 Jy
! Clean residual min=-0.000648 max=0.000735 Jy/beam
! Clean residual mean=-0.000003 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.13255 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464159 Jy
! Component: 100  -  total flux cleaned = 0.000868175 Jy
! Component: 150  -  total flux cleaned = 0.00121027 Jy
! Component: 200  -  total flux cleaned = 0.0015163 Jy
! Total flux subtracted in 200 components = 0.0015163 Jy
! Clean residual min=-0.000545 max=0.000574 Jy/beam
! Clean residual mean=-0.000002 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.134066 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 146 components and 0.134066 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.335 mas, bpa=4.777 degrees
! Estimated noise=0.138038 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000260861 Jy
! Component: 100  -  total flux cleaned = 0.000460149 Jy
! Component: 150  -  total flux cleaned = 0.000611777 Jy
! Component: 200  -  total flux cleaned = 0.000775227 Jy
! Total flux subtracted in 200 components = 0.000775227 Jy
! Clean residual min=-0.000490 max=0.000500 Jy/beam
! Clean residual mean=-0.000001 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.134841 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 176 components and 0.134841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032740Jy  sigma=0.673389
! Fit after  self-cal, rms=0.032737Jy  sigma=0.673274
wmodel /J1225+1253_X_map.mod
! wmodel: Unable to open new model file: /J1225+1253_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1225+1253_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 2.335 at 4.777 degrees (North through East)
! Clean map  min=-0.0004428  max=0.11289 Jy/beam
! Writing clean map to FITS file: .//J1225+1253_X_map.fits
wmodel .//J1225+1253_X_map.mod
! Writing 176 model components to file: .//J1225+1253_X_map.mod
wobs   .//J1225+1253_X_uvs.fits
! Writing UV FITS file: .//J1225+1253_X_uvs.fits
wwins  .//J1225+1253_X_map.win
! wwins: Wrote 7 windows to .//J1225+1253_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.112885 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000109484 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.290961 0.290961 0.581922 1.16384 2.32769 4.65538 9.31076 18.6215 37.243 74.486
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.112 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1031.06 
quit
! Quitting program
! Log file .//J1225+1253_X_dfm.log closed on Wed Nov 16 11:58:01 2016