! Started logfile: .//J1224+2122_X_dfm.log on Wed Nov 16 11:57:54 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1224+2122_X_uva.fits
! Reading UV FITS file: .//J1224+2122_X_uva.fits
! AN table 1: 39 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.700142 visibilities/baseline/integration-bin.
! Found source: J1224+2122
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 7864 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1224+2122_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.595409Jy  sigma=51.066851
! Fit after  self-cal, rms=0.420729Jy  sigma=13.247982
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7509 mas, bmaj=2.197 mas, bpa=-14.39 degrees
! Estimated noise=0.420459 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.897885 Jy
! Component: 100  -  total flux cleaned = 1.19207 Jy
! Total flux subtracted in 100 components = 1.19207 Jy
! Clean residual min=-0.085225 max=0.136929 Jy/beam
! Clean residual mean=-0.000351 rms=0.021111 Jy/beam
! Combined flux in latest and established models = 1.19207 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.19207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.298932Jy  sigma=9.303255
! Fit after  self-cal, rms=0.298112Jy  sigma=9.280315
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.159125 Jy
! Component: 100  -  total flux cleaned = 0.251717 Jy
! Total flux subtracted in 100 components = 0.251717 Jy
! Clean residual min=-0.054831 max=0.055997 Jy/beam
! Clean residual mean=-0.000220 rms=0.011390 Jy/beam
! Combined flux in latest and established models = 1.44379 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 1.44379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.168436Jy  sigma=5.199112
! Fit after  self-cal, rms=0.167666Jy  sigma=5.175884
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9818 mas, bmaj=2.263 mas, bpa=-11.26 degrees
! Estimated noise=0.252116 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0765388 Jy
! Component: 100  -  total flux cleaned = 0.12207 Jy
! Component: 150  -  total flux cleaned = 0.152902 Jy
! Component: 200  -  total flux cleaned = 0.174498 Jy
! Total flux subtracted in 200 components = 0.174498 Jy
! Clean residual min=-0.046753 max=0.050792 Jy/beam
! Clean residual mean=-0.000224 rms=0.012036 Jy/beam
! Combined flux in latest and established models = 1.61828 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 1.61828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.121106Jy  sigma=3.842934
! Fit after  self-cal, rms=0.120432Jy  sigma=3.818022
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9818 x 2.263 at -11.26 degrees (North through East)
! Clean map  min=-0.043928  max=1.2292 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.00     KP        1.09     LA        0.92     
!   MK        0.99     NL        1.06     OV        0.95     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.02     KP        1.09     LA        0.93     
!   MK        0.99     NL        1.06     OV        0.94     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.01     KP        1.08     LA        0.92     
!   MK        1.00     NL        1.06     OV        0.95     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.00     KP        1.08     LA        0.92     
!   MK        1.00     NL        1.05     OV        0.95     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.00     KP        1.07     LA        0.92     
!   MK        1.00     NL        1.05     OV        0.96     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.99     KP        1.07     LA        0.91     
!   MK        1.00     NL        1.05     OV        0.96     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.99     KP        1.07     LA        0.92     
!   MK        1.00     NL        1.05     OV        0.96     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.00     KP        1.07     LA        0.93     
!   MK        1.01     NL        1.06     OV        0.96     PT        0.98     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.120432Jy  sigma=3.818022
! Fit after  self-cal, rms=0.086397Jy  sigma=2.797059
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9773 mas, bmaj=2.289 mas, bpa=-11.35 degrees
! Estimated noise=0.252596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0448256 Jy
! Component: 100  -  total flux cleaned = 0.0691592 Jy
! Component: 150  -  total flux cleaned = 0.0807714 Jy
! Component: 200  -  total flux cleaned = 0.0845091 Jy
! Total flux subtracted in 200 components = 0.0845091 Jy
! Clean residual min=-0.019367 max=0.032010 Jy/beam
! Clean residual mean=-0.000024 rms=0.005190 Jy/beam
! Combined flux in latest and established models = 1.70279 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 49 components and 1.70279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059409Jy  sigma=1.851471
! Fit after  self-cal, rms=0.056852Jy  sigma=1.783315
! Inverting map 
! Added new window around map position (0, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0259323 Jy
! Component: 100  -  total flux cleaned = 0.0365823 Jy
! Component: 150  -  total flux cleaned = 0.0424356 Jy
! Component: 200  -  total flux cleaned = 0.0457444 Jy
! Total flux subtracted in 200 components = 0.0457444 Jy
! Clean residual min=-0.015101 max=0.012020 Jy/beam
! Clean residual mean=0.000012 rms=0.003319 Jy/beam
! Combined flux in latest and established models = 1.74854 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 67 components and 1.74854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042041Jy  sigma=1.322984
! Fit after  self-cal, rms=0.041716Jy  sigma=1.311813
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041716Jy  sigma=1.311813
! Fit after  self-cal, rms=0.038039Jy  sigma=1.199025
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9769 mas, bmaj=2.288 mas, bpa=-11.34 degrees
! Estimated noise=0.251624 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00791306 Jy
! Component: 100  -  total flux cleaned = 0.0116029 Jy
! Component: 150  -  total flux cleaned = 0.014148 Jy
! Component: 200  -  total flux cleaned = 0.0161345 Jy
! Total flux subtracted in 200 components = 0.0161345 Jy
! Clean residual min=-0.010185 max=0.007930 Jy/beam
! Clean residual mean=0.000012 rms=0.002439 Jy/beam
! Combined flux in latest and established models = 1.76467 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 83 components and 1.76467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033774Jy  sigma=1.057074
! Fit after  self-cal, rms=0.033522Jy  sigma=1.049387
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352613 Jy
! Component: 100  -  total flux cleaned = 0.00147993 Jy
! Component: 150  -  total flux cleaned = 0.00263289 Jy
! Component: 200  -  total flux cleaned = 0.00367925 Jy
! Total flux subtracted in 200 components = 0.00367925 Jy
! Clean residual min=-0.009252 max=0.007530 Jy/beam
! Clean residual mean=0.000014 rms=0.002220 Jy/beam
! Combined flux in latest and established models = 1.76835 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 92 components and 1.76835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031764Jy  sigma=0.996019
! Fit after  self-cal, rms=0.031679Jy  sigma=0.992583
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031679Jy  sigma=0.992583
! Fit after  self-cal, rms=0.031208Jy  sigma=0.974298
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9772 mas, bmaj=2.288 mas, bpa=-11.33 degrees
! Estimated noise=0.251369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278512 Jy
! Component: 100  -  total flux cleaned = 0.00438595 Jy
! Component: 150  -  total flux cleaned = 0.0054877 Jy
! Component: 200  -  total flux cleaned = 0.00635285 Jy
! Total flux subtracted in 200 components = 0.00635285 Jy
! Clean residual min=-0.007989 max=0.006938 Jy/beam
! Clean residual mean=0.000010 rms=0.001920 Jy/beam
! Combined flux in latest and established models = 1.7747 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 105 components and 1.7747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029802Jy  sigma=0.928196
! Fit after  self-cal, rms=0.029723Jy  sigma=0.925521
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000278697 Jy
! Component: 100  -  total flux cleaned = 0.000504802 Jy
! Component: 150  -  total flux cleaned = 0.00112092 Jy
! Component: 200  -  total flux cleaned = 0.0016034 Jy
! Total flux subtracted in 200 components = 0.0016034 Jy
! Clean residual min=-0.007670 max=0.006517 Jy/beam
! Clean residual mean=0.000010 rms=0.001808 Jy/beam
! Combined flux in latest and established models = 1.77631 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 112 components and 1.77631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029001Jy  sigma=0.902608
! Fit after  self-cal, rms=0.028969Jy  sigma=0.901411
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028969Jy  sigma=0.901411
! Fit after  self-cal, rms=0.028817Jy  sigma=0.894868
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.028 mas, bmaj=2.956 mas, bpa=-10.06 degrees
! Estimated noise=0.307135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264258 Jy
! Component: 100  -  total flux cleaned = 0.00447033 Jy
! Component: 150  -  total flux cleaned = 0.00543064 Jy
! Component: 200  -  total flux cleaned = 0.00631452 Jy
! Total flux subtracted in 200 components = 0.00631452 Jy
! Clean residual min=-0.008777 max=0.009069 Jy/beam
! Clean residual mean=0.000014 rms=0.002721 Jy/beam
! Combined flux in latest and established models = 1.78262 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 125 components and 1.78262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028397Jy  sigma=0.880244
! Fit after  self-cal, rms=0.028268Jy  sigma=0.875493
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113 Jy
! Component: 100  -  total flux cleaned = 0.00197351 Jy
! Component: 150  -  total flux cleaned = 0.00274502 Jy
! Component: 200  -  total flux cleaned = 0.00346001 Jy
! Total flux subtracted in 200 components = 0.00346001 Jy
! Clean residual min=-0.008179 max=0.008435 Jy/beam
! Clean residual mean=0.000016 rms=0.002519 Jy/beam
! Combined flux in latest and established models = 1.78608 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 132 components and 1.78608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028062Jy  sigma=0.868976
! Fit after  self-cal, rms=0.028030Jy  sigma=0.867451
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9776 mas, bmaj=2.288 mas, bpa=-11.32 degrees
! Estimated noise=0.251248 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9776 x 2.288 at -11.32 degrees (North through East)
! Clean map  min=-0.0062458  max=1.228 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028030Jy  sigma=0.867451
! Fit after  self-cal, rms=0.026199Jy  sigma=0.807168
! Inverting map and beam 
! Estimated beam: bmin=0.9779 mas, bmaj=2.288 mas, bpa=-11.29 degrees
! Estimated noise=0.251034 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115988 Jy
! Component: 100  -  total flux cleaned = 0.00115893 Jy
! Component: 150  -  total flux cleaned = 0.000964568 Jy
! Component: 200  -  total flux cleaned = 0.00113105 Jy
! Total flux subtracted in 200 components = 0.00113105 Jy
! Clean residual min=-0.005619 max=0.006038 Jy/beam
! Clean residual mean=0.000007 rms=0.001366 Jy/beam
! Combined flux in latest and established models = 1.78721 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 146 components and 1.78721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025427Jy  sigma=0.781300
! Fit after  self-cal, rms=0.025398Jy  sigma=0.780414
! Inverting map 
! Added new window around map position (-0.4, 16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597377 Jy
! Component: 100  -  total flux cleaned = 0.00853125 Jy
! Component: 150  -  total flux cleaned = 0.00972396 Jy
! Component: 200  -  total flux cleaned = 0.0109471 Jy
! Total flux subtracted in 200 components = 0.0109471 Jy
! Clean residual min=-0.004693 max=0.004000 Jy/beam
! Clean residual mean=0.000004 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 1.79816 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 163 components and 1.79816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023723Jy  sigma=0.723580
! Fit after  self-cal, rms=0.023644Jy  sigma=0.721644
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023644Jy  sigma=0.721644
! Fit after  self-cal, rms=0.023518Jy  sigma=0.717116
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7516 mas, bmaj=2.2 mas, bpa=-14.2 degrees
! Estimated noise=0.418764 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.889214 Jy
! Component: 100  -  total flux cleaned = 1.17862 Jy
! Component: 150  -  total flux cleaned = 1.33336 Jy
! Component: 200  -  total flux cleaned = 1.42566 Jy
! Total flux subtracted in 200 components = 1.42566 Jy
! Clean residual min=-0.034919 max=0.049517 Jy/beam
! Clean residual mean=-0.000143 rms=0.009578 Jy/beam
! Combined flux in latest and established models = 1.42566 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 1.42566 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9782 mas, bmaj=2.288 mas, bpa=-11.28 degrees
! Estimated noise=0.250922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0816351 Jy
! Component: 100  -  total flux cleaned = 0.136446 Jy
! Component: 150  -  total flux cleaned = 0.176813 Jy
! Component: 200  -  total flux cleaned = 0.207347 Jy
! Total flux subtracted in 200 components = 0.207347 Jy
! Clean residual min=-0.014589 max=0.022110 Jy/beam
! Clean residual mean=-0.000078 rms=0.005273 Jy/beam
! Combined flux in latest and established models = 1.63301 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 45 components and 1.63301 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.03 mas, bmaj=2.956 mas, bpa=-9.989 degrees
! Estimated noise=0.306508 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0353354 Jy
! Component: 100  -  total flux cleaned = 0.0583011 Jy
! Component: 150  -  total flux cleaned = 0.0759142 Jy
! Component: 200  -  total flux cleaned = 0.0900865 Jy
! Total flux subtracted in 200 components = 0.0900865 Jy
! Clean residual min=-0.012871 max=0.011544 Jy/beam
! Clean residual mean=-0.000058 rms=0.004709 Jy/beam
! Combined flux in latest and established models = 1.72309 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118161 Jy
! Component: 100  -  total flux cleaned = 0.0217247 Jy
! Component: 150  -  total flux cleaned = 0.0300669 Jy
! Component: 200  -  total flux cleaned = 0.0371271 Jy
! Total flux subtracted in 200 components = 0.0371271 Jy
! Clean residual min=-0.008726 max=0.006923 Jy/beam
! Clean residual mean=-0.000029 rms=0.002871 Jy/beam
! Combined flux in latest and established models = 1.76022 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 142 components and 1.76022 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9782 mas, bmaj=2.288 mas, bpa=-11.28 degrees
! Estimated noise=0.250922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00796801 Jy
! Component: 100  -  total flux cleaned = 0.014086 Jy
! Component: 150  -  total flux cleaned = 0.0191727 Jy
! Component: 200  -  total flux cleaned = 0.022888 Jy
! Total flux subtracted in 200 components = 0.022888 Jy
! Clean residual min=-0.005771 max=0.005451 Jy/beam
! Clean residual mean=-0.000005 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 1.78311 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 165 components and 1.78311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026880Jy  sigma=0.817581
! Fit after  self-cal, rms=0.026657Jy  sigma=0.810391
wmodel /J1224+2122_X_map.mod
! wmodel: Unable to open new model file: /J1224+2122_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1224+2122_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9782 x 2.288 at -11.28 degrees (North through East)
! Clean map  min=-0.0047702  max=1.2347 Jy/beam
! Writing clean map to FITS file: .//J1224+2122_X_map.fits
wmodel .//J1224+2122_X_map.mod
! Writing 165 model components to file: .//J1224+2122_X_map.mod
wobs   .//J1224+2122_X_uvs.fits
! Writing UV FITS file: .//J1224+2122_X_uvs.fits
wwins  .//J1224+2122_X_map.win
! wwins: Wrote 4 windows to .//J1224+2122_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.23466 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0012795 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.310895 0.310895 0.62179 1.24358 2.48716 4.97432 9.94865 19.8973 39.7946 79.5892
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0038 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.234 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  964.955 
quit
! Quitting program
! Log file .//J1224+2122_X_dfm.log closed on Wed Nov 16 11:57:56 2016