! Started logfile: .//J1203+6031_X_dfm.log on Wed Nov 16 11:57:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1203+6031_X_uvm.fits
! Reading UV FITS file: .//J1203+6031_X_uvm.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.781056 visibilities/baseline/integration-bin.
! Found source: J1203+6031
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 17152 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1203+6031_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006004Jy  sigma=32.031622
! Fit after  self-cal, rms=0.908969Jy  sigma=28.941276
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8137 mas, bmaj=1.2 mas, bpa=-10.89 degrees
! Estimated noise=0.327638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0655282 Jy
! Component: 100  -  total flux cleaned = 0.0845486 Jy
! Total flux subtracted in 100 components = 0.0845486 Jy
! Clean residual min=-0.002759 max=0.007549 Jy/beam
! Clean residual mean=-0.000005 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0845486 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0845486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032663Jy  sigma=0.873455
! Fit after  self-cal, rms=0.032580Jy  sigma=0.871940
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00781839 Jy
! Component: 100  -  total flux cleaned = 0.0116885 Jy
! Total flux subtracted in 100 components = 0.0116885 Jy
! Clean residual min=-0.002284 max=0.004302 Jy/beam
! Clean residual mean=-0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0962371 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.0962371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029654Jy  sigma=0.763917
! Fit after  self-cal, rms=0.029640Jy  sigma=0.763310
! Inverting map 
! Added new window around map position (-0.2, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00404493 Jy
! Component: 100  -  total flux cleaned = 0.00621546 Jy
! Total flux subtracted in 100 components = 0.00621546 Jy
! Clean residual min=-0.002155 max=0.002875 Jy/beam
! Clean residual mean=-0.000003 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.102453 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 27 components and 0.102453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028818Jy  sigma=0.731755
! Fit after  self-cal, rms=0.028748Jy  sigma=0.729400
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=1.535 mas, bpa=-0.8433 degrees
! Estimated noise=0.174252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031366 Jy
! Component: 100  -  total flux cleaned = 0.0049267 Jy
! Component: 150  -  total flux cleaned = 0.00605989 Jy
! Component: 200  -  total flux cleaned = 0.00680801 Jy
! Total flux subtracted in 200 components = 0.00680801 Jy
! Clean residual min=-0.001711 max=0.002713 Jy/beam
! Clean residual mean=-0.000007 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.109261 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 43 components and 0.109261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028370Jy  sigma=0.716498
! Fit after  self-cal, rms=0.028345Jy  sigma=0.715725
! Inverting map 
! Added new window around map position (0.6, -14.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223818 Jy
! Component: 100  -  total flux cleaned = 0.00331765 Jy
! Component: 150  -  total flux cleaned = 0.00383433 Jy
! Component: 200  -  total flux cleaned = 0.0041201 Jy
! Total flux subtracted in 200 components = 0.0041201 Jy
! Clean residual min=-0.001642 max=0.001851 Jy/beam
! Clean residual mean=-0.000004 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.113381 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 60 components and 0.113381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028152Jy  sigma=0.708985
! Fit after  self-cal, rms=0.028126Jy  sigma=0.707882
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.059 x 1.535 at -0.8433 degrees (North through East)
! Clean map  min=-0.001441  max=0.087417 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.00     KP        1.07     
!   LA        0.97     MK        1.04     NL        1.09     OV        0.98     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.00     KP        1.07     
!   LA        0.96     MK        1.03     NL        1.08     OV        0.98     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        1.05     
!   LA        0.96     MK        1.02     NL        1.09     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.97     KP        1.06     
!   LA        0.97     MK        1.04     NL        1.09     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.07     
!   LA        0.96     MK        1.02     NL        1.08     OV        1.00     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.00     KP        1.08     
!   LA        0.95     MK        1.04     NL        1.07     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.98     KP        1.05     
!   LA        0.96     MK        1.04     NL        1.07     OV        0.98     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.01     KP        1.06     
!   LA        0.98     MK        1.02     NL        1.08     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.028126Jy  sigma=0.707882
! Fit after  self-cal, rms=0.027566Jy  sigma=0.689668
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=1.547 mas, bpa=-0.0218 degrees
! Estimated noise=0.175133 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00049777 Jy
! Component: 100  -  total flux cleaned = -0.000538326 Jy
! Component: 150  -  total flux cleaned = -0.000569636 Jy
! Component: 200  -  total flux cleaned = -0.000569859 Jy
! Total flux subtracted in 200 components = -0.000569859 Jy
! Clean residual min=-0.000835 max=0.001009 Jy/beam
! Clean residual mean=-0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.112811 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.112811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027541Jy  sigma=0.688793
! Fit after  self-cal, rms=0.027530Jy  sigma=0.688665
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027530Jy  sigma=0.688665
! Fit after  self-cal, rms=0.027452Jy  sigma=0.685973
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.542 mas, bpa=-0.3469 degrees
! Estimated noise=0.17469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162751 Jy
! Component: 100  -  total flux cleaned = -0.000205409 Jy
! Component: 150  -  total flux cleaned = -0.000255341 Jy
! Component: 200  -  total flux cleaned = -0.000277974 Jy
! Total flux subtracted in 200 components = -0.000277974 Jy
! Clean residual min=-0.000763 max=0.000946 Jy/beam
! Clean residual mean=-0.000001 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.112533 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 92 components and 0.112533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027439Jy  sigma=0.685473
! Fit after  self-cal, rms=0.027439Jy  sigma=0.685429
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.85578e-05 Jy
! Component: 100  -  total flux cleaned = -8.89463e-05 Jy
! Component: 150  -  total flux cleaned = -9.90503e-05 Jy
! Component: 200  -  total flux cleaned = -0.000117085 Jy
! Total flux subtracted in 200 components = -0.000117085 Jy
! Clean residual min=-0.000761 max=0.000957 Jy/beam
! Clean residual mean=-0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.112416 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 94 components and 0.112416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027431Jy  sigma=0.685154
! Fit after  self-cal, rms=0.027430Jy  sigma=0.685131
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027430Jy  sigma=0.685131
! Fit after  self-cal, rms=0.027420Jy  sigma=0.684937
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.543 mas, bpa=-0.1912 degrees
! Estimated noise=0.174626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141156 Jy
! Component: 100  -  total flux cleaned = -0.000141308 Jy
! Component: 150  -  total flux cleaned = -0.000159234 Jy
! Component: 200  -  total flux cleaned = -0.000176148 Jy
! Total flux subtracted in 200 components = -0.000176148 Jy
! Clean residual min=-0.000751 max=0.000962 Jy/beam
! Clean residual mean=-0.000001 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.11224 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 95 components and 0.11224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027413Jy  sigma=0.684686
! Fit after  self-cal, rms=0.027412Jy  sigma=0.684665
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.20444e-05 Jy
! Component: 100  -  total flux cleaned = -6.02677e-05 Jy
! Component: 150  -  total flux cleaned = -6.77944e-05 Jy
! Component: 200  -  total flux cleaned = -6.77288e-05 Jy
! Total flux subtracted in 200 components = -6.77288e-05 Jy
! Clean residual min=-0.000749 max=0.000968 Jy/beam
! Clean residual mean=-0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.112172 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 98 components and 0.112172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027408Jy  sigma=0.684505
! Fit after  self-cal, rms=0.027407Jy  sigma=0.684492
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027407Jy  sigma=0.684492
! Fit after  self-cal, rms=0.027398Jy  sigma=0.684327
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=2.605 mas, bpa=7.173 degrees
! Estimated noise=0.218243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423884 Jy
! Component: 100  -  total flux cleaned = 0.000460918 Jy
! Component: 150  -  total flux cleaned = 0.000501791 Jy
! Component: 200  -  total flux cleaned = 0.000519309 Jy
! Total flux subtracted in 200 components = 0.000519309 Jy
! Clean residual min=-0.001163 max=0.001541 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.112691 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 0.112691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027398Jy  sigma=0.684351
! Fit after  self-cal, rms=0.027398Jy  sigma=0.684334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.19272e-05 Jy
! Component: 100  -  total flux cleaned = 9.75211e-05 Jy
! Component: 150  -  total flux cleaned = 0.000119414 Jy
! Component: 200  -  total flux cleaned = 0.000139841 Jy
! Total flux subtracted in 200 components = 0.000139841 Jy
! Clean residual min=-0.001149 max=0.001541 Jy/beam
! Clean residual mean=-0.000001 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.112831 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 113 components and 0.112831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027398Jy  sigma=0.684387
! Fit after  self-cal, rms=0.027399Jy  sigma=0.684382
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.544 mas, bpa=-0.04197 degrees
! Estimated noise=0.17458 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.06 x 1.544 at -0.04197 degrees (North through East)
! Clean map  min=-0.00073603  max=0.088062 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8137 mas, bmaj=1.199 mas, bpa=-10.64 degrees
! Estimated noise=0.330639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0660096 Jy
! Component: 100  -  total flux cleaned = 0.0856313 Jy
! Component: 150  -  total flux cleaned = 0.0942801 Jy
! Component: 200  -  total flux cleaned = 0.0989867 Jy
! Total flux subtracted in 200 components = 0.0989867 Jy
! Clean residual min=-0.001337 max=0.002383 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0989867 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0989867 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.544 mas, bpa=-0.04197 degrees
! Estimated noise=0.17458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409962 Jy
! Component: 100  -  total flux cleaned = 0.0063412 Jy
! Component: 150  -  total flux cleaned = 0.00784605 Jy
! Component: 200  -  total flux cleaned = 0.00893658 Jy
! Total flux subtracted in 200 components = 0.00893658 Jy
! Clean residual min=-0.000897 max=0.000999 Jy/beam
! Clean residual mean=-0.000004 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.107923 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 49 components and 0.107923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=2.605 mas, bpa=7.173 degrees
! Estimated noise=0.218243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153897 Jy
! Component: 100  -  total flux cleaned = 0.00253845 Jy
! Component: 150  -  total flux cleaned = 0.00325577 Jy
! Component: 200  -  total flux cleaned = 0.00377843 Jy
! Total flux subtracted in 200 components = 0.00377843 Jy
! Clean residual min=-0.001140 max=0.001530 Jy/beam
! Clean residual mean=-0.000003 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.111702 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387367 Jy
! Component: 100  -  total flux cleaned = 0.000675673 Jy
! Component: 150  -  total flux cleaned = 0.000890574 Jy
! Component: 200  -  total flux cleaned = 0.00104524 Jy
! Total flux subtracted in 200 components = 0.00104524 Jy
! Clean residual min=-0.001115 max=0.001532 Jy/beam
! Clean residual mean=-0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.112747 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 80 components and 0.112747 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.544 mas, bpa=-0.04197 degrees
! Estimated noise=0.17458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161578 Jy
! Component: 100  -  total flux cleaned = -0.000175032 Jy
! Component: 150  -  total flux cleaned = -0.000163589 Jy
! Component: 200  -  total flux cleaned = -0.000184359 Jy
! Total flux subtracted in 200 components = -0.000184359 Jy
! Clean residual min=-0.000769 max=0.001021 Jy/beam
! Clean residual mean=-0.000001 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.112563 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 93 components and 0.112563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027409Jy  sigma=0.684683
! Fit after  self-cal, rms=0.027402Jy  sigma=0.684514
wmodel /J1203+6031_X_map.mod
! wmodel: Unable to open new model file: /J1203+6031_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1203+6031_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.06 x 1.544 at -0.04197 degrees (North through East)
! Clean map  min=-0.00073808  max=0.088157 Jy/beam
! Writing clean map to FITS file: .//J1203+6031_X_map.fits
wmodel .//J1203+6031_X_map.mod
! Writing 93 model components to file: .//J1203+6031_X_map.mod
wobs   .//J1203+6031_X_uvs.fits
! Writing UV FITS file: .//J1203+6031_X_uvs.fits
wwins  .//J1203+6031_X_map.win
! wwins: Wrote 3 windows to .//J1203+6031_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0881568 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000227737 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.774995 0.774995 1.54999 3.09998 6.19996 12.3999 24.7999 49.5997 99.1994
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  387.099 
quit
! Quitting program
! Log file .//J1203+6031_X_dfm.log closed on Wed Nov 16 11:57:11 2016