! Started logfile: .//J1159-2228_X_dfm.log on Wed Nov 16 11:57:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1159-2228_X_uva.fits
! Reading UV FITS file: .//J1159-2228_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.506667 visibilities/baseline/integration-bin.
! Found source: J1159-2228
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 10944 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1159-2228_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 197 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009708Jy  sigma=25.426410
! Fit after  self-cal, rms=0.906052Jy  sigma=22.672376
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7082 mas, bmaj=1.738 mas, bpa=-2.162 degrees
! Estimated noise=0.445378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0636861 Jy
! Component: 100  -  total flux cleaned = 0.0858408 Jy
! Total flux subtracted in 100 components = 0.0858408 Jy
! Clean residual min=-0.010220 max=0.032379 Jy/beam
! Clean residual mean=-0.000071 rms=0.002937 Jy/beam
! Combined flux in latest and established models = 0.0858408 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0858408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074167Jy  sigma=1.758429
! Fit after  self-cal, rms=0.073451Jy  sigma=1.743298
! Inverting map 
! Added new window around map position (-0.6, -4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0276965 Jy
! Component: 100  -  total flux cleaned = 0.0418235 Jy
! Total flux subtracted in 100 components = 0.0418235 Jy
! Clean residual min=-0.007739 max=0.018692 Jy/beam
! Clean residual mean=-0.000049 rms=0.002002 Jy/beam
! Combined flux in latest and established models = 0.127664 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.127664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059317Jy  sigma=1.329177
! Fit after  self-cal, rms=0.052988Jy  sigma=1.182862
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180048 Jy
! Component: 100  -  total flux cleaned = 0.0276954 Jy
! Total flux subtracted in 100 components = 0.0276954 Jy
! Clean residual min=-0.005435 max=0.008744 Jy/beam
! Clean residual mean=-0.000035 rms=0.001265 Jy/beam
! Combined flux in latest and established models = 0.15536 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 45 components and 0.15536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044499Jy  sigma=0.923549
! Fit after  self-cal, rms=0.042564Jy  sigma=0.873328
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00941552 Jy
! Component: 100  -  total flux cleaned = 0.0148919 Jy
! Total flux subtracted in 100 components = 0.0148919 Jy
! Clean residual min=-0.003606 max=0.005392 Jy/beam
! Clean residual mean=-0.000027 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.170252 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.170252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039824Jy  sigma=0.780575
! Fit after  self-cal, rms=0.039301Jy  sigma=0.767346
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9066 mas, bmaj=2.147 mas, bpa=-2.093 degrees
! Estimated noise=0.277984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00612808 Jy
! Component: 100  -  total flux cleaned = 0.00907116 Jy
! Component: 150  -  total flux cleaned = 0.00990447 Jy
! Component: 200  -  total flux cleaned = 0.0105441 Jy
! Total flux subtracted in 200 components = 0.0105441 Jy
! Clean residual min=-0.003317 max=0.004395 Jy/beam
! Clean residual mean=-0.000032 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.180796 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 67 components and 0.180796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038396Jy  sigma=0.734942
! Fit after  self-cal, rms=0.038237Jy  sigma=0.731254
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9066 x 2.147 at -2.093 degrees (North through East)
! Clean map  min=-0.0034061  max=0.073383 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        1.04     KP        1.01     
!   LA        0.94     MK        0.99     NL        1.07     OV        1.00     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.06     KP        1.00     
!   LA        0.91     MK        1.02     NL        1.04     OV        0.99     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     HN        1.07     KP        1.02     
!   LA        0.93     MK        1.02     NL        1.09     OV        1.01     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.07     KP        1.03     
!   LA        0.94     MK        0.98     NL        1.04     OV        1.01     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        1.10     KP        1.05     
!   LA        0.94     MK        0.96     NL        1.08     OV        1.01     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        1.12     KP        1.03     
!   LA        0.95     MK        1.02     NL        1.07     OV        1.01     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        1.02     KP        1.03     
!   LA        0.96     MK        0.99     NL        1.11     OV        1.00     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.04     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.12     OV        1.01     
!   PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.038237Jy  sigma=0.731254
! Fit after  self-cal, rms=0.038763Jy  sigma=0.702630
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9221 mas, bmaj=2.182 mas, bpa=-1.764 degrees
! Estimated noise=0.283421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00039994 Jy
! Component: 100  -  total flux cleaned = 0.000205503 Jy
! Component: 150  -  total flux cleaned = 0.000101193 Jy
! Component: 200  -  total flux cleaned = 8.17258e-06 Jy
! Total flux subtracted in 200 components = 8.17258e-06 Jy
! Clean residual min=-0.001706 max=0.002290 Jy/beam
! Clean residual mean=-0.000009 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.180804 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.180804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038558Jy  sigma=0.696293
! Fit after  self-cal, rms=0.038526Jy  sigma=0.695379
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038526Jy  sigma=0.695379
! Fit after  self-cal, rms=0.038840Jy  sigma=0.690337
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9241 mas, bmaj=2.188 mas, bpa=-1.741 degrees
! Estimated noise=0.283187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308585 Jy
! Component: 100  -  total flux cleaned = 0.000171733 Jy
! Component: 150  -  total flux cleaned = 9.50007e-05 Jy
! Component: 200  -  total flux cleaned = -6.95982e-06 Jy
! Total flux subtracted in 200 components = -6.95982e-06 Jy
! Clean residual min=-0.001684 max=0.002007 Jy/beam
! Clean residual mean=-0.000006 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.180797 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 79 components and 0.180797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038749Jy  sigma=0.687209
! Fit after  self-cal, rms=0.038734Jy  sigma=0.686697
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, 9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125653 Jy
! Component: 100  -  total flux cleaned = 0.00142281 Jy
! Component: 150  -  total flux cleaned = 0.00145659 Jy
! Component: 200  -  total flux cleaned = 0.00142733 Jy
! Total flux subtracted in 200 components = 0.00142733 Jy
! Clean residual min=-0.001447 max=0.001555 Jy/beam
! Clean residual mean=-0.000005 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.182224 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.182224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038641Jy  sigma=0.683397
! Fit after  self-cal, rms=0.038624Jy  sigma=0.683065
! Inverting map 
! Added new window around map position (14.2, -15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111782 Jy
! Component: 100  -  total flux cleaned = 0.00121601 Jy
! Component: 150  -  total flux cleaned = 0.00124611 Jy
! Component: 200  -  total flux cleaned = 0.0012987 Jy
! Total flux subtracted in 200 components = 0.0012987 Jy
! Clean residual min=-0.001380 max=0.001471 Jy/beam
! Clean residual mean=-0.000004 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.183523 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 111 components and 0.183523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038560Jy  sigma=0.680963
! Fit after  self-cal, rms=0.038550Jy  sigma=0.680775
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038550Jy  sigma=0.680775
! Fit after  self-cal, rms=0.038545Jy  sigma=0.680495
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9246 mas, bmaj=2.187 mas, bpa=-1.687 degrees
! Estimated noise=0.283023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000408435 Jy
! Component: 100  -  total flux cleaned = 0.000571693 Jy
! Component: 150  -  total flux cleaned = 0.00062029 Jy
! Component: 200  -  total flux cleaned = 0.000599005 Jy
! Total flux subtracted in 200 components = 0.000599005 Jy
! Clean residual min=-0.001303 max=0.001346 Jy/beam
! Clean residual mean=-0.000003 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.184122 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 116 components and 0.184122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038511Jy  sigma=0.679370
! Fit after  self-cal, rms=0.038506Jy  sigma=0.679273
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015177 Jy
! Component: 100  -  total flux cleaned = 0.000259075 Jy
! Component: 150  -  total flux cleaned = 0.000239093 Jy
! Component: 200  -  total flux cleaned = 0.000239017 Jy
! Total flux subtracted in 200 components = 0.000239017 Jy
! Clean residual min=-0.001257 max=0.001306 Jy/beam
! Clean residual mean=-0.000002 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.184361 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 123 components and 0.184361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038486Jy  sigma=0.678584
! Fit after  self-cal, rms=0.038482Jy  sigma=0.678525
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038482Jy  sigma=0.678525
! Fit after  self-cal, rms=0.038502Jy  sigma=0.678462
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.361 mas, bmaj=4.784 mas, bpa=2.397 degrees
! Estimated noise=0.352926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.17527e-05 Jy
! Component: 100  -  total flux cleaned = 6.26471e-05 Jy
! Component: 150  -  total flux cleaned = 6.20697e-05 Jy
! Component: 200  -  total flux cleaned = 7.70127e-05 Jy
! Total flux subtracted in 200 components = 7.70127e-05 Jy
! Clean residual min=-0.001223 max=0.001294 Jy/beam
! Clean residual mean=-0.000004 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.184438 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 136 components and 0.184438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038499Jy  sigma=0.678089
! Fit after  self-cal, rms=0.038495Jy  sigma=0.678005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.62963e-05 Jy
! Component: 100  -  total flux cleaned = 4.46472e-05 Jy
! Component: 150  -  total flux cleaned = 2.21148e-05 Jy
! Component: 200  -  total flux cleaned = 9.75128e-07 Jy
! Total flux subtracted in 200 components = 9.75128e-07 Jy
! Clean residual min=-0.001190 max=0.001269 Jy/beam
! Clean residual mean=-0.000004 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.184439 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 149 components and 0.184439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038498Jy  sigma=0.677937
! Fit after  self-cal, rms=0.038495Jy  sigma=0.677899
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=2.187 mas, bpa=-1.653 degrees
! Estimated noise=0.283086 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9253 x 2.187 at -1.653 degrees (North through East)
! Clean map  min=-0.0011338  max=0.072291 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7129 mas, bmaj=1.747 mas, bpa=-1.52 degrees
! Estimated noise=0.457695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0735871 Jy
! Component: 100  -  total flux cleaned = 0.105504 Jy
! Component: 150  -  total flux cleaned = 0.125847 Jy
! Component: 200  -  total flux cleaned = 0.140316 Jy
! Total flux subtracted in 200 components = 0.140316 Jy
! Clean residual min=-0.004185 max=0.009595 Jy/beam
! Clean residual mean=-0.000031 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.140316 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.140316 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=2.187 mas, bpa=-1.653 degrees
! Estimated noise=0.283086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166224 Jy
! Component: 100  -  total flux cleaned = 0.025942 Jy
! Component: 150  -  total flux cleaned = 0.031498 Jy
! Component: 200  -  total flux cleaned = 0.0351426 Jy
! Total flux subtracted in 200 components = 0.0351426 Jy
! Clean residual min=-0.001930 max=0.002129 Jy/beam
! Clean residual mean=-0.000010 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.175459 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 68 components and 0.175459 Jy
! Inverting map 
! Added new window around map position (14, -25.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265084 Jy
! Component: 100  -  total flux cleaned = 0.00466011 Jy
! Component: 150  -  total flux cleaned = 0.00620654 Jy
! Component: 200  -  total flux cleaned = 0.00741622 Jy
! Total flux subtracted in 200 components = 0.00741622 Jy
! Clean residual min=-0.001465 max=0.001432 Jy/beam
! Clean residual mean=-0.000003 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.182875 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 94 components and 0.182875 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.361 mas, bmaj=4.784 mas, bpa=2.397 degrees
! Estimated noise=0.352926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117679 Jy
! Component: 100  -  total flux cleaned = 0.00183535 Jy
! Component: 150  -  total flux cleaned = 0.00192275 Jy
! Component: 200  -  total flux cleaned = 0.00196031 Jy
! Total flux subtracted in 200 components = 0.00196031 Jy
! Clean residual min=-0.001291 max=0.001298 Jy/beam
! Clean residual mean=-0.000003 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.184835 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.47202e-05 Jy
! Component: 100  -  total flux cleaned = 6.71758e-05 Jy
! Component: 150  -  total flux cleaned = 0.000112277 Jy
! Component: 200  -  total flux cleaned = 0.000112175 Jy
! Total flux subtracted in 200 components = 0.000112175 Jy
! Clean residual min=-0.001261 max=0.001277 Jy/beam
! Clean residual mean=-0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.184947 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 127 components and 0.184947 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=2.187 mas, bpa=-1.653 degrees
! Estimated noise=0.283086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000186123 Jy
! Component: 100  -  total flux cleaned = -0.000215335 Jy
! Component: 150  -  total flux cleaned = -0.000215027 Jy
! Component: 200  -  total flux cleaned = -0.00019192 Jy
! Total flux subtracted in 200 components = -0.00019192 Jy
! Clean residual min=-0.001230 max=0.001277 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.184755 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 145 components and 0.184755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038480Jy  sigma=0.677781
! Fit after  self-cal, rms=0.038466Jy  sigma=0.677151
wmodel /J1159-2228_X_map.mod
! wmodel: Unable to open new model file: /J1159-2228_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1159-2228_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9253 x 2.187 at -1.653 degrees (North through East)
! Clean map  min=-0.0010656  max=0.070687 Jy/beam
! Writing clean map to FITS file: .//J1159-2228_X_map.fits
wmodel .//J1159-2228_X_map.mod
! Writing 145 model components to file: .//J1159-2228_X_map.mod
wobs   .//J1159-2228_X_uvs.fits
! Writing UV FITS file: .//J1159-2228_X_uvs.fits
wwins  .//J1159-2228_X_map.win
! wwins: Wrote 6 windows to .//J1159-2228_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0706865 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000278062 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.18012 1.18012 2.36024 4.72048 9.44096 18.8819 37.7638 75.5277
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  254.211 
quit
! Quitting program
! Log file .//J1159-2228_X_dfm.log closed on Wed Nov 16 11:57:07 2016