! Started logfile: .//J1110+4403_X_dfm.log on Wed Nov 16 11:56:25 2016 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J1110+4403_X_uvm.fits ! Reading UV FITS file: .//J1110+4403_X_uvm.fits ! AN table 1: 27 integrations on 36 of 36 possible baselines. ! AN table 2: 187 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.617024 visibilities/baseline/integration-bin. ! Found source: J1110+4403 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): I ! ! Read 94 lines of history. ! ! Reading 46336 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Polarization RR is unavailable. ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: I, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1110+4403_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.012435Jy sigma=31.461439 ! Fit after self-cal, rms=0.827553Jy sigma=25.763751 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7691 mas, bmaj=1.801 mas, bpa=20.6 degrees ! Estimated noise=0.209767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129147 Jy ! Component: 100 - total flux cleaned = 0.158626 Jy ! Total flux subtracted in 100 components = 0.158626 Jy ! Clean residual min=-0.003245 max=0.010844 Jy/beam ! Clean residual mean=-0.000012 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.158626 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.158626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037845Jy sigma=1.031238 ! Fit after self-cal, rms=0.037775Jy sigma=1.029649 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110225 Jy ! Component: 100 - total flux cleaned = 0.0161504 Jy ! Total flux subtracted in 100 components = 0.0161504 Jy ! Clean residual min=-0.002615 max=0.005411 Jy/beam ! Clean residual mean=-0.000005 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.174776 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 7 components and 0.174776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.032983Jy sigma=0.874811 ! Fit after self-cal, rms=0.032981Jy sigma=0.874678 ! Inverting map ! Added new window around map position (-2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478425 Jy ! Component: 100 - total flux cleaned = 0.00756331 Jy ! Total flux subtracted in 100 components = 0.00756331 Jy ! Clean residual min=-0.002409 max=0.003662 Jy/beam ! Clean residual mean=-0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.18234 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.18234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031660Jy sigma=0.829583 ! Fit after self-cal, rms=0.031567Jy sigma=0.826016 ! Inverting map ! Added new window around map position (-7, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333396 Jy ! Component: 100 - total flux cleaned = 0.00559536 Jy ! Total flux subtracted in 100 components = 0.00559536 Jy ! Clean residual min=-0.002201 max=0.002664 Jy/beam ! Clean residual mean=-0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.187935 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.187935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030880Jy sigma=0.801930 ! Fit after self-cal, rms=0.030862Jy sigma=0.801143 ! Inverting map ! Added new window around map position (2.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241025 Jy ! Component: 100 - total flux cleaned = 0.00416038 Jy ! Total flux subtracted in 100 components = 0.00416038 Jy ! Clean residual min=-0.002140 max=0.002031 Jy/beam ! Clean residual mean=0.000001 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.192095 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.192095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030459Jy sigma=0.787509 ! Fit after self-cal, rms=0.030455Jy sigma=0.787366 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.235 mas, bpa=23.26 degrees ! Estimated noise=0.108065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354506 Jy ! Component: 100 - total flux cleaned = 0.00626326 Jy ! Component: 150 - total flux cleaned = 0.00851564 Jy ! Component: 200 - total flux cleaned = 0.0104093 Jy ! Total flux subtracted in 200 components = 0.0104093 Jy ! Clean residual min=-0.001992 max=0.002357 Jy/beam ! Clean residual mean=0.000006 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.202505 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 87 components and 0.202505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029793Jy sigma=0.764972 ! Fit after self-cal, rms=0.029776Jy sigma=0.764336 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.016 x 2.235 at 23.26 degrees (North through East) ! Clean map min=-0.0018622 max=0.16878 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.02 KP 1.05 LA 0.94 ! MK 1.04 NL 1.05 OV 0.99 PT 0.96 ! SC 0.95 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.96 HN 1.01 KP 1.06 ! LA 0.96 MK 1.01 NL 1.05 OV 0.99 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.03 KP 1.07 LA 0.96 ! MK 1.04 NL 1.04 OV 0.98 PT 0.95 ! SC 0.96 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.95 HN 1.00 KP 1.06 ! LA 0.97 MK 1.01 NL 1.06 OV 0.99 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 1.01 KP 1.05 LA 0.94 ! MK 1.03 NL 1.06 OV 1.00 PT 0.96 ! SC 0.97 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.95 HN 1.01 KP 1.05 ! LA 0.96 MK 1.01 NL 1.05 OV 0.99 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.02 KP 1.06 LA 0.93 ! MK 1.04 NL 1.05 OV 0.98 PT 0.95 ! SC 0.96 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 HN 1.01 KP 1.05 ! LA 0.97 MK 1.02 NL 1.04 OV 1.00 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.02 KP 1.04 LA 0.94 ! MK 1.03 NL 1.04 OV 0.99 PT 0.97 ! SC 0.97 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.96 HN 1.02 KP 1.06 ! LA 0.96 MK 1.02 NL 1.04 OV 1.00 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.02 KP 1.05 LA 0.95 ! MK 1.05 NL 1.06 OV 0.98 PT 0.96 ! SC 0.97 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.95 HN 1.02 KP 1.06 ! LA 0.97 MK 1.02 NL 1.04 OV 1.00 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.02 KP 1.05 LA 0.94 ! MK 1.06 NL 1.04 OV 1.00 PT 0.96 ! SC 0.96 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.95 HN 1.01 KP 1.06 ! LA 0.97 MK 1.01 NL 1.05 OV 0.99 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.02 KP 1.07 LA 0.95 ! MK 1.04 NL 1.08 OV 0.99 PT 0.94 ! SC 0.97 ! ! A total of 87 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.96 HN 1.02 KP 1.06 ! LA 0.97 MK 1.02 NL 1.05 OV 1.00 ! PT 0.97 SC 0.99 ! ! ! Fit before self-cal, rms=0.029776Jy sigma=0.764336 ! Fit after self-cal, rms=0.028368Jy sigma=0.717761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.238 mas, bpa=23.73 degrees ! Estimated noise=0.109071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497745 Jy ! Component: 100 - total flux cleaned = -0.000428746 Jy ! Component: 150 - total flux cleaned = -0.000371132 Jy ! Component: 200 - total flux cleaned = -0.000294158 Jy ! Total flux subtracted in 200 components = -0.000294158 Jy ! Clean residual min=-0.001081 max=0.001388 Jy/beam ! Clean residual mean=0.000006 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.20221 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.20221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028289Jy sigma=0.714802 ! Fit after self-cal, rms=0.028279Jy sigma=0.714695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028279Jy sigma=0.714695 ! Fit after self-cal, rms=0.028075Jy sigma=0.710834 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.015 mas, bmaj=2.237 mas, bpa=23.78 degrees ! Estimated noise=0.108916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000703486 Jy ! Component: 100 - total flux cleaned = -0.000905489 Jy ! Component: 150 - total flux cleaned = -0.000967078 Jy ! Component: 200 - total flux cleaned = -0.00100326 Jy ! Total flux subtracted in 200 components = -0.00100326 Jy ! Clean residual min=-0.000988 max=0.001394 Jy/beam ! Clean residual mean=0.000005 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.201207 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 0.201207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.028033Jy sigma=0.709352 ! Fit after self-cal, rms=0.028032Jy sigma=0.709330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127984 Jy ! Component: 100 - total flux cleaned = 0.00184567 Jy ! Component: 150 - total flux cleaned = 0.00213844 Jy ! Component: 200 - total flux cleaned = 0.00229875 Jy ! Total flux subtracted in 200 components = 0.00229875 Jy ! Clean residual min=-0.000873 max=0.001163 Jy/beam ! Clean residual mean=0.000004 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.203506 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 0.203506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027971Jy sigma=0.707178 ! Fit after self-cal, rms=0.027968Jy sigma=0.707065 ! Inverting map ! Added new window around map position (-7, -33.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000989391 Jy ! Component: 100 - total flux cleaned = 0.00149786 Jy ! Component: 150 - total flux cleaned = 0.00191267 Jy ! Component: 200 - total flux cleaned = 0.00219574 Jy ! Total flux subtracted in 200 components = 0.00219574 Jy ! Clean residual min=-0.000892 max=0.001019 Jy/beam ! Clean residual mean=0.000003 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.205702 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 174 components and 0.205702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027922Jy sigma=0.705767 ! Fit after self-cal, rms=0.027919Jy sigma=0.705644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027919Jy sigma=0.705644 ! Fit after self-cal, rms=0.027593Jy sigma=0.689236 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.234 mas, bpa=23.76 degrees ! Estimated noise=0.108951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26568e-05 Jy ! Component: 100 - total flux cleaned = -0.000213649 Jy ! Component: 150 - total flux cleaned = -0.000333068 Jy ! Component: 200 - total flux cleaned = -0.000424584 Jy ! Total flux subtracted in 200 components = -0.000424584 Jy ! Clean residual min=-0.000543 max=0.000884 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.205277 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 209 components and 0.205277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027568Jy sigma=0.688358 ! Fit after self-cal, rms=0.027571Jy sigma=0.688330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859457 Jy ! Component: 100 - total flux cleaned = 0.00130962 Jy ! Component: 150 - total flux cleaned = 0.00149167 Jy ! Component: 200 - total flux cleaned = 0.00152094 Jy ! Total flux subtracted in 200 components = 0.00152094 Jy ! Clean residual min=-0.000518 max=0.000624 Jy/beam ! Clean residual mean=0.000001 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.206798 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 232 components and 0.206798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027537Jy sigma=0.687154 ! Fit after self-cal, rms=0.027535Jy sigma=0.687091 ! Inverting map ! Added new window around map position (-1.6, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515482 Jy ! Component: 100 - total flux cleaned = 0.000633058 Jy ! Component: 150 - total flux cleaned = 0.000659022 Jy ! Component: 200 - total flux cleaned = 0.00067093 Jy ! Total flux subtracted in 200 components = 0.00067093 Jy ! Clean residual min=-0.000476 max=0.000474 Jy/beam ! Clean residual mean=0.000002 rms=0.000115 Jy/beam ! Combined flux in latest and established models = 0.207469 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 254 components and 0.207469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027518Jy sigma=0.686526 ! Fit after self-cal, rms=0.027517Jy sigma=0.686509 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027517Jy sigma=0.686509 ! Fit after self-cal, rms=0.027512Jy sigma=0.686310 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.187 mas, bmaj=2.918 mas, bpa=25.68 degrees ! Estimated noise=0.133313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.78865e-05 Jy ! Component: 100 - total flux cleaned = -0.000131887 Jy ! Component: 150 - total flux cleaned = -0.000145012 Jy ! Component: 200 - total flux cleaned = -0.000167015 Jy ! Total flux subtracted in 200 components = -0.000167015 Jy ! Clean residual min=-0.000552 max=0.000549 Jy/beam ! Clean residual mean=0.000003 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.207302 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 283 components and 0.207302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027506Jy sigma=0.686025 ! Fit after self-cal, rms=0.027505Jy sigma=0.686006 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.77545e-06 Jy ! Component: 100 - total flux cleaned = 1.75735e-06 Jy ! Component: 150 - total flux cleaned = 1.01955e-05 Jy ! Component: 200 - total flux cleaned = 1.828e-05 Jy ! Total flux subtracted in 200 components = 1.828e-05 Jy ! Clean residual min=-0.000535 max=0.000544 Jy/beam ! Clean residual mean=0.000003 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.20732 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 295 components and 0.20732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027503Jy sigma=0.685888 ! Fit after self-cal, rms=0.027502Jy sigma=0.685883 ! Inverting map ! Added new window around map position (49.2, 37.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283649 Jy ! Component: 100 - total flux cleaned = 0.000284021 Jy ! Component: 150 - total flux cleaned = 0.000344557 Jy ! Component: 200 - total flux cleaned = 0.000371713 Jy ! Total flux subtracted in 200 components = 0.000371713 Jy ! Clean residual min=-0.000490 max=0.000417 Jy/beam ! Clean residual mean=0.000003 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.207692 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 329 components and 0.207692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027495Jy sigma=0.685609 ! Fit after self-cal, rms=0.027494Jy sigma=0.685591 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.235 mas, bpa=23.77 degrees ! Estimated noise=0.108927 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.014 x 2.235 at 23.77 degrees (North through East) ! Clean map min=-0.00039609 max=0.16942 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.77 mas, bmaj=1.797 mas, bpa=20.83 degrees ! Estimated noise=0.208729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129617 Jy ! Component: 100 - total flux cleaned = 0.159024 Jy ! Component: 150 - total flux cleaned = 0.169792 Jy ! Component: 200 - total flux cleaned = 0.175474 Jy ! Total flux subtracted in 200 components = 0.175474 Jy ! Clean residual min=-0.001420 max=0.003088 Jy/beam ! Clean residual mean=-0.000005 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.175474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.175474 Jy ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.235 mas, bpa=23.77 degrees ! Estimated noise=0.108927 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648736 Jy ! Component: 100 - total flux cleaned = 0.0106879 Jy ! Component: 150 - total flux cleaned = 0.0137451 Jy ! Component: 200 - total flux cleaned = 0.0161298 Jy ! Total flux subtracted in 200 components = 0.0161298 Jy ! Clean residual min=-0.000870 max=0.001472 Jy/beam ! Clean residual mean=-0.000003 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.191604 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 49 components and 0.191604 Jy ! Inverting map ! Added new window around map position (-5.8, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192913 Jy ! Component: 100 - total flux cleaned = 0.00351427 Jy ! Component: 150 - total flux cleaned = 0.00484341 Jy ! Component: 200 - total flux cleaned = 0.00598668 Jy ! Total flux subtracted in 200 components = 0.00598668 Jy ! Clean residual min=-0.000661 max=0.000840 Jy/beam ! Clean residual mean=-0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.19759 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 95 components and 0.197591 Jy ! Inverting map ! Added new window around map position (-5.8, 13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101766 Jy ! Component: 100 - total flux cleaned = 0.00189935 Jy ! Component: 150 - total flux cleaned = 0.00267996 Jy ! Component: 200 - total flux cleaned = 0.00337639 Jy ! Total flux subtracted in 200 components = 0.00337639 Jy ! Clean residual min=-0.000553 max=0.000588 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.200967 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 127 components and 0.200967 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.187 mas, bmaj=2.918 mas, bpa=25.68 degrees ! Estimated noise=0.133313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991029 Jy ! Component: 100 - total flux cleaned = 0.00174678 Jy ! Component: 150 - total flux cleaned = 0.00235336 Jy ! Component: 200 - total flux cleaned = 0.00280538 Jy ! Total flux subtracted in 200 components = 0.00280538 Jy ! Clean residual min=-0.000516 max=0.000530 Jy/beam ! Clean residual mean=0.000002 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.203772 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406829 Jy ! Component: 100 - total flux cleaned = 0.000664941 Jy ! Component: 150 - total flux cleaned = 0.000910648 Jy ! Component: 200 - total flux cleaned = 0.00113255 Jy ! Total flux subtracted in 200 components = 0.00113255 Jy ! Clean residual min=-0.000498 max=0.000452 Jy/beam ! Clean residual mean=0.000003 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.204905 Jy ! Adding 149 model components to the UV plane model. ! The established model now contains 256 components and 0.204905 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.235 mas, bpa=23.77 degrees ! Estimated noise=0.108927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403016 Jy ! Component: 100 - total flux cleaned = 0.000692365 Jy ! Component: 150 - total flux cleaned = 0.000855883 Jy ! Component: 200 - total flux cleaned = 0.00097414 Jy ! Total flux subtracted in 200 components = 0.00097414 Jy ! Clean residual min=-0.000430 max=0.000449 Jy/beam ! Clean residual mean=0.000002 rms=0.000104 Jy/beam ! Combined flux in latest and established models = 0.205879 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 288 components and 0.205879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027495Jy sigma=0.685671 ! Fit after self-cal, rms=0.027490Jy sigma=0.685507 wmodel /J1110+4403_X_map.mod ! wmodel: Unable to open new model file: /J1110+4403_X_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap .//J1110+4403_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.014 x 2.235 at 23.77 degrees (North through East) ! Clean map min=-0.00041898 max=0.16972 Jy/beam ! Writing clean map to FITS file: .//J1110+4403_X_map.fits wmodel .//J1110+4403_X_map.mod ! Writing 288 model components to file: .//J1110+4403_X_map.mod wobs .//J1110+4403_X_uvs.fits ! Writing UV FITS file: .//J1110+4403_X_uvs.fits wwins .//J1110+4403_X_map.win ! wwins: Wrote 11 windows to .//J1110+4403_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.16972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000103413 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.182794 0.182794 0.365589 0.731178 1.46236 2.92471 5.84942 11.6988 23.3977 46.7954 93.5908 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.169 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1641.19 quit ! Quitting program ! Log file .//J1110+4403_X_dfm.log closed on Wed Nov 16 11:56:30 2016