! Started logfile: .//J1048+7143_X_dfm.log on Wed Nov 16 11:56:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1048+7143_X_uvm.fits
! Reading UV FITS file: .//J1048+7143_X_uvm.fits
! AN table 1: 51 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.869281 visibilities/baseline/integration-bin.
! Found source: J1048+7143
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 12768 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1048+7143_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.641488Jy  sigma=44.048101
! Fit after  self-cal, rms=0.425671Jy  sigma=10.913944
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7898 mas, bmaj=2.51 mas, bpa=54.85 degrees
! Estimated noise=0.421913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04854 Jy
! Component: 100  -  total flux cleaned = 1.27909 Jy
! Total flux subtracted in 100 components = 1.27909 Jy
! Clean residual min=-0.065726 max=0.116559 Jy/beam
! Clean residual mean=0.000103 rms=0.015018 Jy/beam
! Combined flux in latest and established models = 1.27909 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.27909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.231221Jy  sigma=5.945475
! Fit after  self-cal, rms=0.231210Jy  sigma=5.944345
! Inverting map 
! Added new window around map position (-0.6, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0730383 Jy
! Component: 100  -  total flux cleaned = 0.0924926 Jy
! Total flux subtracted in 100 components = 0.0924926 Jy
! Clean residual min=-0.055816 max=0.090733 Jy/beam
! Clean residual mean=0.000065 rms=0.012489 Jy/beam
! Combined flux in latest and established models = 1.37159 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 1.37159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.185088Jy  sigma=4.885425
! Fit after  self-cal, rms=0.181822Jy  sigma=4.798645
! Inverting map 
! Added new window around map position (0.8, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.041257 Jy
! Component: 100  -  total flux cleaned = 0.0430396 Jy
! Total flux subtracted in 100 components = 0.0430396 Jy
! Clean residual min=-0.049259 max=0.062484 Jy/beam
! Clean residual mean=0.000049 rms=0.010446 Jy/beam
! Combined flux in latest and established models = 1.41462 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 34 components and 1.41462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.158997Jy  sigma=4.292547
! Fit after  self-cal, rms=0.158689Jy  sigma=4.280319
! Inverting map 
! Added new window around map position (-3.6, 7.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0516318 Jy
! Component: 100  -  total flux cleaned = 0.0630979 Jy
! Total flux subtracted in 100 components = 0.0630979 Jy
! Clean residual min=-0.043303 max=0.054609 Jy/beam
! Clean residual mean=0.000041 rms=0.009213 Jy/beam
! Combined flux in latest and established models = 1.47772 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 45 components and 1.47772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.142663Jy  sigma=3.901613
! Fit after  self-cal, rms=0.141583Jy  sigma=3.875796
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=3.106 mas, bpa=54.17 degrees
! Estimated noise=0.234527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159703 Jy
! Component: 100  -  total flux cleaned = 0.0150535 Jy
! Component: 150  -  total flux cleaned = 0.015841 Jy
! Component: 200  -  total flux cleaned = 0.0158628 Jy
! Total flux subtracted in 200 components = 0.0158628 Jy
! Clean residual min=-0.038483 max=0.044188 Jy/beam
! Clean residual mean=0.000147 rms=0.008353 Jy/beam
! Combined flux in latest and established models = 1.49359 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 70 components and 1.49359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.131094Jy  sigma=3.638750
! Fit after  self-cal, rms=0.130762Jy  sigma=3.631123
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.017 x 3.106 at 54.17 degrees (North through East)
! Clean map  min=-0.037051  max=1.3005 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        1.08     
!   LA        0.99     MK        0.96     NL        1.03     OV        1.00     
!   PT        0.97     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        1.06     
!   LA        1.00     MK        0.97     NL        1.03     OV        1.00     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.97     KP        1.06     
!   LA        0.99     MK        0.96     NL        1.02     OV        0.99     
!   PT        0.98     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        1.06     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.99     
!   PT        0.98     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.99     KP        1.06     
!   LA        0.99     MK        0.97     NL        1.02     OV        0.98     
!   PT        0.98     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.98     KP        1.06     
!   LA        0.99     MK        0.98     NL        1.02     OV        0.98     
!   PT        0.97     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.02     KP        1.05     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.98     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.02     KP        1.05     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.130762Jy  sigma=3.631123
! Fit after  self-cal, rms=0.120297Jy  sigma=3.353420
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=3.101 mas, bpa=54.15 degrees
! Estimated noise=0.233957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00638636 Jy
! Component: 100  -  total flux cleaned = -0.011135 Jy
! Component: 150  -  total flux cleaned = -0.0147583 Jy
! Component: 200  -  total flux cleaned = -0.0180966 Jy
! Total flux subtracted in 200 components = -0.0180966 Jy
! Clean residual min=-0.039075 max=0.035295 Jy/beam
! Clean residual mean=0.000095 rms=0.007226 Jy/beam
! Combined flux in latest and established models = 1.47549 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 1.47549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.114773Jy  sigma=3.204294
! Fit after  self-cal, rms=0.114635Jy  sigma=3.201153
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.114635Jy  sigma=3.201153
! Fit after  self-cal, rms=0.069636Jy  sigma=1.822301
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=3.088 mas, bpa=53.68 degrees
! Estimated noise=0.235137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0122096 Jy
! Component: 100  -  total flux cleaned = -0.0143838 Jy
! Component: 150  -  total flux cleaned = -0.0165297 Jy
! Component: 200  -  total flux cleaned = -0.0186302 Jy
! Total flux subtracted in 200 components = -0.0186302 Jy
! Clean residual min=-0.013444 max=0.017819 Jy/beam
! Clean residual mean=0.000055 rms=0.003301 Jy/beam
! Combined flux in latest and established models = 1.45686 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 107 components and 1.45686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.061637Jy  sigma=1.608695
! Fit after  self-cal, rms=0.061240Jy  sigma=1.598958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.2, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00762061 Jy
! Component: 100  -  total flux cleaned = 0.00485194 Jy
! Component: 150  -  total flux cleaned = 0.00245702 Jy
! Component: 200  -  total flux cleaned = 0.00120991 Jy
! Total flux subtracted in 200 components = 0.00120991 Jy
! Clean residual min=-0.011545 max=0.014224 Jy/beam
! Clean residual mean=0.000052 rms=0.002891 Jy/beam
! Combined flux in latest and established models = 1.45807 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 131 components and 1.45807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055847Jy  sigma=1.449378
! Fit after  self-cal, rms=0.055516Jy  sigma=1.441202
! Inverting map 
! Added new window around map position (3.2, -8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00837848 Jy
! Component: 100  -  total flux cleaned = 0.00943866 Jy
! Component: 150  -  total flux cleaned = 0.00887157 Jy
! Component: 200  -  total flux cleaned = 0.00778429 Jy
! Total flux subtracted in 200 components = 0.00778429 Jy
! Clean residual min=-0.010295 max=0.012801 Jy/beam
! Clean residual mean=0.000046 rms=0.002569 Jy/beam
! Combined flux in latest and established models = 1.46585 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 149 components and 1.46585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051369Jy  sigma=1.320463
! Fit after  self-cal, rms=0.051195Jy  sigma=1.315413
! Inverting map 
! Added new window around map position (5, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00590817 Jy
! Component: 100  -  total flux cleaned = 0.00652492 Jy
! Component: 150  -  total flux cleaned = 0.0071106 Jy
! Component: 200  -  total flux cleaned = 0.0076361 Jy
! Total flux subtracted in 200 components = 0.0076361 Jy
! Clean residual min=-0.008956 max=0.008700 Jy/beam
! Clean residual mean=0.000038 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 1.47349 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 175 components and 1.47349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047180Jy  sigma=1.188497
! Fit after  self-cal, rms=0.047079Jy  sigma=1.185593
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047079Jy  sigma=1.185593
! Fit after  self-cal, rms=0.045218Jy  sigma=1.135209
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=3.084 mas, bpa=53.57 degrees
! Estimated noise=0.235011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0025063 Jy
! Component: 100  -  total flux cleaned = -0.00249324 Jy
! Component: 150  -  total flux cleaned = -0.00339628 Jy
! Component: 200  -  total flux cleaned = -0.00401919 Jy
! Total flux subtracted in 200 components = -0.00401919 Jy
! Clean residual min=-0.007716 max=0.006846 Jy/beam
! Clean residual mean=0.000024 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 1.46947 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 194 components and 1.46947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042487Jy  sigma=1.052859
! Fit after  self-cal, rms=0.042422Jy  sigma=1.051104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141154 Jy
! Component: 100  -  total flux cleaned = -0.00212578 Jy
! Component: 150  -  total flux cleaned = -0.00229836 Jy
! Component: 200  -  total flux cleaned = -0.00293417 Jy
! Total flux subtracted in 200 components = -0.00293417 Jy
! Clean residual min=-0.007220 max=0.005965 Jy/beam
! Clean residual mean=0.000026 rms=0.001587 Jy/beam
! Combined flux in latest and established models = 1.46654 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 216 components and 1.46654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041237Jy  sigma=1.013711
! Fit after  self-cal, rms=0.041212Jy  sigma=1.013234
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041212Jy  sigma=1.013234
! Fit after  self-cal, rms=0.040753Jy  sigma=0.998655
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.341 mas, bmaj=4.746 mas, bpa=42.16 degrees
! Estimated noise=0.28595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000151957 Jy
! Component: 100  -  total flux cleaned = 0.000340292 Jy
! Component: 150  -  total flux cleaned = 0.00078733 Jy
! Component: 200  -  total flux cleaned = 0.000924057 Jy
! Total flux subtracted in 200 components = 0.000924057 Jy
! Clean residual min=-0.006699 max=0.006015 Jy/beam
! Clean residual mean=0.000033 rms=0.001719 Jy/beam
! Combined flux in latest and established models = 1.46746 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 240 components and 1.46746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039928Jy  sigma=0.971986
! Fit after  self-cal, rms=0.039883Jy  sigma=0.971019
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.95782e-05 Jy
! Component: 100  -  total flux cleaned = 0.000207582 Jy
! Component: 150  -  total flux cleaned = 0.000204379 Jy
! Component: 200  -  total flux cleaned = 0.000299252 Jy
! Total flux subtracted in 200 components = 0.000299252 Jy
! Clean residual min=-0.006546 max=0.005659 Jy/beam
! Clean residual mean=0.000031 rms=0.001608 Jy/beam
! Combined flux in latest and established models = 1.46776 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 262 components and 1.46776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039457Jy  sigma=0.958142
! Fit after  self-cal, rms=0.039441Jy  sigma=0.957882
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=3.082 mas, bpa=53.52 degrees
! Estimated noise=0.234784 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.015 x 3.082 at 53.52 degrees (North through East)
! Clean map  min=-0.025685  max=1.2972 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039441Jy  sigma=0.957882
! Fit after  self-cal, rms=0.035990Jy  sigma=0.878527
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=3.08 mas, bpa=53.51 degrees
! Estimated noise=0.234787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134101 Jy
! Component: 100  -  total flux cleaned = -0.00118482 Jy
! Component: 150  -  total flux cleaned = -0.00158571 Jy
! Component: 200  -  total flux cleaned = -0.00171191 Jy
! Total flux subtracted in 200 components = -0.00171191 Jy
! Clean residual min=-0.005622 max=0.004388 Jy/beam
! Clean residual mean=0.000017 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 1.46605 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 273 components and 1.46605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034943Jy  sigma=0.846993
! Fit after  self-cal, rms=0.034921Jy  sigma=0.846393
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000842534 Jy
! Component: 100  -  total flux cleaned = -0.00128316 Jy
! Component: 150  -  total flux cleaned = -0.00138963 Jy
! Component: 200  -  total flux cleaned = -0.00129253 Jy
! Total flux subtracted in 200 components = -0.00129253 Jy
! Clean residual min=-0.005350 max=0.004096 Jy/beam
! Clean residual mean=0.000017 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 1.46476 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 283 components and 1.46475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034363Jy  sigma=0.829574
! Fit after  self-cal, rms=0.034358Jy  sigma=0.829459
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034358Jy  sigma=0.829459
! Fit after  self-cal, rms=0.034217Jy  sigma=0.824842
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7828 mas, bmaj=2.478 mas, bpa=54.13 degrees
! Estimated noise=0.421595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04578 Jy
! Component: 100  -  total flux cleaned = 1.27938 Jy
! Component: 150  -  total flux cleaned = 1.36704 Jy
! Component: 200  -  total flux cleaned = 1.42252 Jy
! Total flux subtracted in 200 components = 1.42252 Jy
! Clean residual min=-0.029060 max=0.032359 Jy/beam
! Clean residual mean=0.000026 rms=0.005797 Jy/beam
! Combined flux in latest and established models = 1.42252 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.42252 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=3.078 mas, bpa=53.49 degrees
! Estimated noise=0.234698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0281371 Jy
! Component: 100  -  total flux cleaned = 0.0417939 Jy
! Component: 150  -  total flux cleaned = 0.0548466 Jy
! Component: 200  -  total flux cleaned = 0.0630404 Jy
! Total flux subtracted in 200 components = 0.0630404 Jy
! Clean residual min=-0.012551 max=0.014414 Jy/beam
! Clean residual mean=0.000013 rms=0.003030 Jy/beam
! Combined flux in latest and established models = 1.48557 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 47 components and 1.48557 Jy
! Inverting map 
! Added new window around map position (9.8, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00646113 Jy
! Component: 100  -  total flux cleaned = 0.00999709 Jy
! Component: 150  -  total flux cleaned = 0.0105329 Jy
! Component: 200  -  total flux cleaned = 0.0105455 Jy
! Total flux subtracted in 200 components = 0.0105455 Jy
! Clean residual min=-0.009531 max=0.010393 Jy/beam
! Clean residual mean=-0.000001 rms=0.002440 Jy/beam
! Combined flux in latest and established models = 1.49611 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 67 components and 1.49611 Jy
! Inverting map 
! Added new window around map position (-10.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00365767 Jy
! Component: 100  -  total flux cleaned = 0.00156542 Jy
! Component: 150  -  total flux cleaned = 0.00119389 Jy
! Component: 200  -  total flux cleaned = 0.000835261 Jy
! Total flux subtracted in 200 components = 0.000835261 Jy
! Clean residual min=-0.008225 max=0.008097 Jy/beam
! Clean residual mean=-0.000007 rms=0.002051 Jy/beam
! Combined flux in latest and established models = 1.49695 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 92 components and 1.49695 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.339 mas, bmaj=4.745 mas, bpa=42.11 degrees
! Estimated noise=0.286125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00211843 Jy
! Component: 100  -  total flux cleaned = -0.00474766 Jy
! Component: 150  -  total flux cleaned = -0.00751901 Jy
! Component: 200  -  total flux cleaned = -0.00955724 Jy
! Total flux subtracted in 200 components = -0.00955724 Jy
! Clean residual min=-0.006460 max=0.006078 Jy/beam
! Clean residual mean=-0.000003 rms=0.001763 Jy/beam
! Combined flux in latest and established models = 1.48739 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129504 Jy
! Component: 100  -  total flux cleaned = -0.0023348 Jy
! Component: 150  -  total flux cleaned = -0.00347895 Jy
! Component: 200  -  total flux cleaned = -0.00456338 Jy
! Total flux subtracted in 200 components = -0.00456338 Jy
! Clean residual min=-0.005805 max=0.005450 Jy/beam
! Clean residual mean=0.000001 rms=0.001601 Jy/beam
! Combined flux in latest and established models = 1.48282 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 141 components and 1.48283 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=3.078 mas, bpa=53.49 degrees
! Estimated noise=0.234698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219665 Jy
! Component: 100  -  total flux cleaned = 0.00221058 Jy
! Component: 150  -  total flux cleaned = 0.000880503 Jy
! Component: 200  -  total flux cleaned = 0.000127142 Jy
! Total flux subtracted in 200 components = 0.000127142 Jy
! Clean residual min=-0.006845 max=0.006769 Jy/beam
! Clean residual mean=-0.000002 rms=0.001540 Jy/beam
! Combined flux in latest and established models = 1.48295 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 160 components and 1.48295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040309Jy  sigma=1.011824
! Fit after  self-cal, rms=0.039877Jy  sigma=0.997543
wmodel /J1048+7143_X_map.mod
! wmodel: Unable to open new model file: /J1048+7143_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1048+7143_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 3.078 at 53.49 degrees (North through East)
! Clean map  min=-0.016883  max=1.2984 Jy/beam
! Writing clean map to FITS file: .//J1048+7143_X_map.fits
wmodel .//J1048+7143_X_map.mod
! Writing 160 model components to file: .//J1048+7143_X_map.mod
wobs   .//J1048+7143_X_uvs.fits
! Writing UV FITS file: .//J1048+7143_X_uvs.fits
wwins  .//J1048+7143_X_map.win
! wwins: Wrote 9 windows to .//J1048+7143_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.29842 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00150341 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.347364 0.347364 0.694728 1.38946 2.77891 5.55783 11.1157 22.2313 44.4626 88.9252
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0045 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.298 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  863.646 
quit
! Quitting program
! Log file .//J1048+7143_X_dfm.log closed on Wed Nov 16 11:56:10 2016