! Started logfile: .//J1038+0512_X_dfm.log on Wed Nov 16 11:55:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1038+0512_X_uvm.fits
! Reading UV FITS file: .//J1038+0512_X_uvm.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.819907 visibilities/baseline/integration-bin.
! Found source: J1038+0512
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 14168 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1038+0512_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.141142Jy  sigma=35.545292
! Fit after  self-cal, rms=0.479780Jy  sigma=15.063693
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7224 mas, bmaj=2.023 mas, bpa=-5.187 degrees
! Estimated noise=0.306863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.393816 Jy
! Component: 100  -  total flux cleaned = 0.501692 Jy
! Total flux subtracted in 100 components = 0.501692 Jy
! Clean residual min=-0.023906 max=0.049416 Jy/beam
! Clean residual mean=0.000008 rms=0.005433 Jy/beam
! Combined flux in latest and established models = 0.501692 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.501692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.106531Jy  sigma=3.247555
! Fit after  self-cal, rms=0.106333Jy  sigma=3.240158
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562573 Jy
! Component: 100  -  total flux cleaned = 0.0873244 Jy
! Total flux subtracted in 100 components = 0.0873244 Jy
! Clean residual min=-0.015387 max=0.015326 Jy/beam
! Clean residual mean=0.000002 rms=0.002735 Jy/beam
! Combined flux in latest and established models = 0.589017 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 11 components and 0.589017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059904Jy  sigma=1.771724
! Fit after  self-cal, rms=0.059687Jy  sigma=1.763040
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180703 Jy
! Component: 100  -  total flux cleaned = 0.0287877 Jy
! Total flux subtracted in 100 components = 0.0287877 Jy
! Clean residual min=-0.013891 max=0.011414 Jy/beam
! Clean residual mean=0.000000 rms=0.002178 Jy/beam
! Combined flux in latest and established models = 0.617804 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.617804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050811Jy  sigma=1.472502
! Fit after  self-cal, rms=0.050796Jy  sigma=1.471680
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8893 mas, bmaj=2.248 mas, bpa=-4.428 degrees
! Estimated noise=0.195766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128996 Jy
! Component: 100  -  total flux cleaned = 0.0210435 Jy
! Component: 150  -  total flux cleaned = 0.026352 Jy
! Component: 200  -  total flux cleaned = 0.0298371 Jy
! Total flux subtracted in 200 components = 0.0298371 Jy
! Clean residual min=-0.012365 max=0.011756 Jy/beam
! Clean residual mean=-0.000003 rms=0.002452 Jy/beam
! Combined flux in latest and established models = 0.647642 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 0.647642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047198Jy  sigma=1.344248
! Fit after  self-cal, rms=0.047176Jy  sigma=1.343066
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8893 x 2.248 at -4.428 degrees (North through East)
! Clean map  min=-0.011938  max=0.52691 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.02     KP        1.04     
!   LA        0.96     MK        0.99     NL        1.08     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.02     KP        1.04     
!   LA        0.96     MK        0.99     NL        1.08     OV        0.97     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.02     KP        1.03     
!   LA        0.96     MK        0.99     NL        1.08     OV        0.97     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.01     KP        1.04     
!   LA        0.97     MK        0.99     NL        1.07     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.02     KP        1.04     
!   LA        0.95     MK        0.99     NL        1.07     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.94     HN        1.02     KP        1.04     
!   LA        0.97     MK        0.99     NL        1.08     OV        0.98     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.02     KP        1.04     
!   LA        0.97     MK        0.99     NL        1.08     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.02     KP        1.04     
!   LA        0.98     MK        0.99     NL        1.08     OV        0.98     
!   PT        0.96     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.047176Jy  sigma=1.343066
! Fit after  self-cal, rms=0.037126Jy  sigma=0.907146
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8924 mas, bmaj=2.266 mas, bpa=-4.465 degrees
! Estimated noise=0.195835 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-24.6, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202128 Jy
! Component: 100  -  total flux cleaned = 0.00240754 Jy
! Component: 150  -  total flux cleaned = 0.00264704 Jy
! Component: 200  -  total flux cleaned = 0.00271456 Jy
! Total flux subtracted in 200 components = 0.00271456 Jy
! Clean residual min=-0.003736 max=0.003106 Jy/beam
! Clean residual mean=-0.000002 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.650356 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.650356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036130Jy  sigma=0.883919
! Fit after  self-cal, rms=0.036091Jy  sigma=0.882382
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036091Jy  sigma=0.882382
! Fit after  self-cal, rms=0.028964Jy  sigma=0.718821
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8931 mas, bmaj=2.267 mas, bpa=-4.437 degrees
! Estimated noise=0.19607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000299745 Jy
! Component: 100  -  total flux cleaned = -0.00034176 Jy
! Component: 150  -  total flux cleaned = -0.000509734 Jy
! Component: 200  -  total flux cleaned = -0.000701746 Jy
! Total flux subtracted in 200 components = -0.000701746 Jy
! Clean residual min=-0.001995 max=0.002692 Jy/beam
! Clean residual mean=0.000001 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.649655 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.649654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028812Jy  sigma=0.713921
! Fit after  self-cal, rms=0.028819Jy  sigma=0.713684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250582 Jy
! Component: 100  -  total flux cleaned = 0.00328728 Jy
! Component: 150  -  total flux cleaned = 0.00351047 Jy
! Component: 200  -  total flux cleaned = 0.00333924 Jy
! Total flux subtracted in 200 components = 0.00333924 Jy
! Clean residual min=-0.001505 max=0.001689 Jy/beam
! Clean residual mean=0.000000 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.652994 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.652994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028489Jy  sigma=0.700809
! Fit after  self-cal, rms=0.028478Jy  sigma=0.700335
! Inverting map 
! Added new window around map position (-1.2, 17.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183107 Jy
! Component: 100  -  total flux cleaned = 0.00262357 Jy
! Component: 150  -  total flux cleaned = 0.0029947 Jy
! Component: 200  -  total flux cleaned = 0.00331931 Jy
! Total flux subtracted in 200 components = 0.00331931 Jy
! Clean residual min=-0.001231 max=0.001180 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.656313 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 0.656313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028316Jy  sigma=0.694244
! Fit after  self-cal, rms=0.028313Jy  sigma=0.694120
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028313Jy  sigma=0.694120
! Fit after  self-cal, rms=0.028293Jy  sigma=0.693765
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8928 mas, bmaj=2.266 mas, bpa=-4.437 degrees
! Estimated noise=0.195965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336634 Jy
! Component: 100  -  total flux cleaned = 0.00062307 Jy
! Component: 150  -  total flux cleaned = 0.000707565 Jy
! Component: 200  -  total flux cleaned = 0.000760946 Jy
! Total flux subtracted in 200 components = 0.000760946 Jy
! Clean residual min=-0.001076 max=0.001149 Jy/beam
! Clean residual mean=0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.657074 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 101 components and 0.657074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028236Jy  sigma=0.691565
! Fit after  self-cal, rms=0.028235Jy  sigma=0.691497
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.4, 21.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100778 Jy
! Component: 100  -  total flux cleaned = 0.00137392 Jy
! Component: 150  -  total flux cleaned = 0.00158326 Jy
! Component: 200  -  total flux cleaned = 0.00169188 Jy
! Total flux subtracted in 200 components = 0.00169188 Jy
! Clean residual min=-0.000997 max=0.001015 Jy/beam
! Clean residual mean=0.000001 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.658766 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 123 components and 0.658766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028183Jy  sigma=0.689470
! Fit after  self-cal, rms=0.028181Jy  sigma=0.689417
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028181Jy  sigma=0.689417
! Fit after  self-cal, rms=0.028173Jy  sigma=0.689277
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.082 mas, bmaj=3.349 mas, bpa=2.15 degrees
! Estimated noise=0.252113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125882 Jy
! Component: 100  -  total flux cleaned = 0.00027974 Jy
! Component: 150  -  total flux cleaned = 0.000370272 Jy
! Component: 200  -  total flux cleaned = 0.000449216 Jy
! Total flux subtracted in 200 components = 0.000449216 Jy
! Clean residual min=-0.000857 max=0.000948 Jy/beam
! Clean residual mean=0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.659215 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 146 components and 0.659215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028152Jy  sigma=0.688353
! Fit after  self-cal, rms=0.028150Jy  sigma=0.688291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.33132e-05 Jy
! Component: 100  -  total flux cleaned = 5.5315e-05 Jy
! Component: 150  -  total flux cleaned = 8.6084e-05 Jy
! Component: 200  -  total flux cleaned = 9.97722e-05 Jy
! Total flux subtracted in 200 components = 9.97722e-05 Jy
! Clean residual min=-0.000809 max=0.000927 Jy/beam
! Clean residual mean=0.000001 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.659315 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 168 components and 0.659315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028144Jy  sigma=0.687952
! Fit after  self-cal, rms=0.028143Jy  sigma=0.687918
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8928 mas, bmaj=2.266 mas, bpa=-4.43 degrees
! Estimated noise=0.195924 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8928 x 2.266 at -4.43 degrees (North through East)
! Clean map  min=-0.00079586  max=0.52716 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028143Jy  sigma=0.687918
! Fit after  self-cal, rms=0.026478Jy  sigma=0.639325
! Inverting map and beam 
! Estimated beam: bmin=0.8928 mas, bmaj=2.266 mas, bpa=-4.428 degrees
! Estimated noise=0.195846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.96336e-06 Jy
! Component: 100  -  total flux cleaned = 4.11079e-05 Jy
! Component: 150  -  total flux cleaned = 0.000123429 Jy
! Component: 200  -  total flux cleaned = 0.000183718 Jy
! Total flux subtracted in 200 components = 0.000183718 Jy
! Clean residual min=-0.000800 max=0.000930 Jy/beam
! Clean residual mean=0.000000 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.659499 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 179 components and 0.659499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026459Jy  sigma=0.638525
! Fit after  self-cal, rms=0.026457Jy  sigma=0.638499
! Inverting map 
! Added new window around map position (12.6, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000480555 Jy
! Component: 100  -  total flux cleaned = 0.000411907 Jy
! Component: 150  -  total flux cleaned = 0.000457482 Jy
! Component: 200  -  total flux cleaned = 0.000527723 Jy
! Total flux subtracted in 200 components = 0.000527723 Jy
! Clean residual min=-0.000730 max=0.000715 Jy/beam
! Clean residual mean=0.000000 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.660026 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 195 components and 0.660026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026428Jy  sigma=0.637396
! Fit after  self-cal, rms=0.026426Jy  sigma=0.637354
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026426Jy  sigma=0.637354
! Fit after  self-cal, rms=0.026421Jy  sigma=0.637261
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7228 mas, bmaj=2.033 mas, bpa=-5.109 degrees
! Estimated noise=0.307738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.394397 Jy
! Component: 100  -  total flux cleaned = 0.502087 Jy
! Component: 150  -  total flux cleaned = 0.557701 Jy
! Component: 200  -  total flux cleaned = 0.588775 Jy
! Total flux subtracted in 200 components = 0.588775 Jy
! Clean residual min=-0.008789 max=0.015465 Jy/beam
! Clean residual mean=0.000004 rms=0.001761 Jy/beam
! Combined flux in latest and established models = 0.588775 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.588775 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8929 mas, bmaj=2.265 mas, bpa=-4.424 degrees
! Estimated noise=0.195845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237672 Jy
! Component: 100  -  total flux cleaned = 0.0360866 Jy
! Component: 150  -  total flux cleaned = 0.0436438 Jy
! Component: 200  -  total flux cleaned = 0.0486385 Jy
! Total flux subtracted in 200 components = 0.0486385 Jy
! Clean residual min=-0.002323 max=0.002723 Jy/beam
! Clean residual mean=0.000001 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.637413 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 38 components and 0.637413 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354942 Jy
! Component: 100  -  total flux cleaned = 0.00633567 Jy
! Component: 150  -  total flux cleaned = 0.00860351 Jy
! Component: 200  -  total flux cleaned = 0.010479 Jy
! Total flux subtracted in 200 components = 0.010479 Jy
! Clean residual min=-0.001759 max=0.001595 Jy/beam
! Clean residual mean=0.000001 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.647892 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 61 components and 0.647892 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.082 mas, bmaj=3.348 mas, bpa=2.168 degrees
! Estimated noise=0.251982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217313 Jy
! Component: 100  -  total flux cleaned = 0.00376943 Jy
! Component: 150  -  total flux cleaned = 0.00484405 Jy
! Component: 200  -  total flux cleaned = 0.00573726 Jy
! Total flux subtracted in 200 components = 0.00573726 Jy
! Clean residual min=-0.001130 max=0.000960 Jy/beam
! Clean residual mean=0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.65363 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00071674 Jy
! Component: 100  -  total flux cleaned = 0.00139834 Jy
! Component: 150  -  total flux cleaned = 0.00199423 Jy
! Component: 200  -  total flux cleaned = 0.0025406 Jy
! Total flux subtracted in 200 components = 0.0025406 Jy
! Clean residual min=-0.000907 max=0.000743 Jy/beam
! Clean residual mean=0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.65617 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 133 components and 0.65617 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8929 mas, bmaj=2.265 mas, bpa=-4.424 degrees
! Estimated noise=0.195845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000698864 Jy
! Component: 100  -  total flux cleaned = 0.000957394 Jy
! Component: 150  -  total flux cleaned = 0.000991556 Jy
! Component: 200  -  total flux cleaned = 0.00105308 Jy
! Total flux subtracted in 200 components = 0.00105308 Jy
! Clean residual min=-0.001301 max=0.000901 Jy/beam
! Clean residual mean=0.000000 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.657223 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 153 components and 0.657224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026555Jy  sigma=0.642830
! Fit after  self-cal, rms=0.026545Jy  sigma=0.642406
wmodel /J1038+0512_X_map.mod
! wmodel: Unable to open new model file: /J1038+0512_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1038+0512_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8929 x 2.265 at -4.424 degrees (North through East)
! Clean map  min=-0.00096965  max=0.52928 Jy/beam
! Writing clean map to FITS file: .//J1038+0512_X_map.fits
wmodel .//J1038+0512_X_map.mod
! Writing 153 model components to file: .//J1038+0512_X_map.mod
wobs   .//J1038+0512_X_uvs.fits
! Writing UV FITS file: .//J1038+0512_X_uvs.fits
wwins  .//J1038+0512_X_map.win
! wwins: Wrote 6 windows to .//J1038+0512_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.529279 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000214486 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.121573 0.121573 0.243145 0.48629 0.97258 1.94516 3.89032 7.78064 15.5613 31.1226 62.2451
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.529 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2467.66 
quit
! Quitting program
! Log file .//J1038+0512_X_dfm.log closed on Wed Nov 16 11:55:48 2016