! Started logfile: .//J1008-2901_X_dfm.log on Wed Nov 16 11:55:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J1008-2901_X_uva.fits
! Reading UV FITS file: .//J1008-2901_X_uva.fits
! AN table 1: 78 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.650997 visibilities/baseline/integration-bin.
! Found source: J1008-2901
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 18280 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1008-2901_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 161 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004767Jy  sigma=23.331421
! Fit after  self-cal, rms=0.927020Jy  sigma=21.527905
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7102 mas, bmaj=2.14 mas, bpa=6.084 degrees
! Estimated noise=0.509179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.053186 Jy
! Component: 100  -  total flux cleaned = 0.0690289 Jy
! Total flux subtracted in 100 components = 0.0690289 Jy
! Clean residual min=-0.003691 max=0.006642 Jy/beam
! Clean residual mean=-0.000000 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.0690289 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0690289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042583Jy  sigma=0.769230
! Fit after  self-cal, rms=0.042364Jy  sigma=0.765140
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00683391 Jy
! Component: 100  -  total flux cleaned = 0.0101484 Jy
! Total flux subtracted in 100 components = 0.0101484 Jy
! Clean residual min=-0.002642 max=0.004399 Jy/beam
! Clean residual mean=-0.000002 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.0791773 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.0791773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041035Jy  sigma=0.714169
! Fit after  self-cal, rms=0.041021Jy  sigma=0.713756
! Inverting map 
! Added new window around map position (1.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360295 Jy
! Component: 100  -  total flux cleaned = 0.00492254 Jy
! Total flux subtracted in 100 components = 0.00492254 Jy
! Clean residual min=-0.002599 max=0.003173 Jy/beam
! Clean residual mean=-0.000003 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.0840998 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.0840998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040759Jy  sigma=0.703969
! Fit after  self-cal, rms=0.040713Jy  sigma=0.702261
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.997 mas, bmaj=2.748 mas, bpa=1.337 degrees
! Estimated noise=0.236349 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.6, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030079 Jy
! Component: 100  -  total flux cleaned = 0.00384126 Jy
! Component: 150  -  total flux cleaned = 0.00437279 Jy
! Component: 200  -  total flux cleaned = 0.00479786 Jy
! Total flux subtracted in 200 components = 0.00479786 Jy
! Clean residual min=-0.001789 max=0.002521 Jy/beam
! Clean residual mean=-0.000010 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0888977 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 50 components and 0.0888977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040463Jy  sigma=0.694348
! Fit after  self-cal, rms=0.040442Jy  sigma=0.693458
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.997 x 2.748 at 1.337 degrees (North through East)
! Clean map  min=-0.0020795  max=0.070693 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        1.04     KP        1.03     
!   LA        0.98     MK        0.96     NL        1.11     OV        0.99     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        1.11     KP        1.03     
!   LA        0.88     MK        0.99     NL        1.14     OV        0.95     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.94     HN        1.08     KP        1.01     
!   LA        0.97     MK        0.98     NL        1.12     OV        0.99     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.92     HN        1.16     KP        1.05     
!   LA        1.02     MK        1.00     NL        1.12     OV        0.95     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.94     HN        1.20     KP        1.02     
!   LA        0.96     MK        1.00     NL        1.11     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        1.08     KP        1.02     
!   LA        0.96     MK        1.00     NL        1.07     OV        0.98     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.95     HN        1.02     KP        1.04     
!   LA        0.98     MK        0.99     NL        1.17     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.95     HN        1.10     KP        1.02     
!   LA        0.96     MK        1.02     NL        1.09     OV        0.97     
!   PT        0.95     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.040442Jy  sigma=0.693458
! Fit after  self-cal, rms=0.042029Jy  sigma=0.682951
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9984 mas, bmaj=2.763 mas, bpa=1.302 degrees
! Estimated noise=0.238704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00112053 Jy
! Component: 100  -  total flux cleaned = -0.00129212 Jy
! Component: 150  -  total flux cleaned = -0.00138349 Jy
! Component: 200  -  total flux cleaned = -0.00147999 Jy
! Total flux subtracted in 200 components = -0.00147999 Jy
! Clean residual min=-0.001014 max=0.001194 Jy/beam
! Clean residual mean=-0.000003 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0874177 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.0874177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041984Jy  sigma=0.681826
! Fit after  self-cal, rms=0.042023Jy  sigma=0.681616
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042023Jy  sigma=0.681616
! Fit after  self-cal, rms=0.042819Jy  sigma=0.679141
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=2.786 mas, bpa=0.9757 degrees
! Estimated noise=0.239937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000377564 Jy
! Component: 100  -  total flux cleaned = -0.000455637 Jy
! Component: 150  -  total flux cleaned = -0.000504538 Jy
! Component: 200  -  total flux cleaned = -0.000546312 Jy
! Total flux subtracted in 200 components = -0.000546312 Jy
! Clean residual min=-0.000934 max=0.001003 Jy/beam
! Clean residual mean=-0.000002 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0868713 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.0868713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042798Jy  sigma=0.678729
! Fit after  self-cal, rms=0.042808Jy  sigma=0.678656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000884281 Jy
! Component: 100  -  total flux cleaned = 0.00077009 Jy
! Component: 150  -  total flux cleaned = 0.000689538 Jy
! Component: 200  -  total flux cleaned = 0.000662025 Jy
! Total flux subtracted in 200 components = 0.000662025 Jy
! Clean residual min=-0.000906 max=0.000918 Jy/beam
! Clean residual mean=-0.000002 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0875334 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 96 components and 0.0875334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042782Jy  sigma=0.677922
! Fit after  self-cal, rms=0.042781Jy  sigma=0.677822
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042781Jy  sigma=0.677822
! Fit after  self-cal, rms=0.043017Jy  sigma=0.677515
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=2.781 mas, bpa=1.048 degrees
! Estimated noise=0.240395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016803 Jy
! Component: 100  -  total flux cleaned = 4.20247e-05 Jy
! Component: 150  -  total flux cleaned = -2.25913e-05 Jy
! Component: 200  -  total flux cleaned = -4.49817e-05 Jy
! Total flux subtracted in 200 components = -4.49817e-05 Jy
! Clean residual min=-0.000899 max=0.000910 Jy/beam
! Clean residual mean=-0.000002 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0874884 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 111 components and 0.0874884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043004Jy  sigma=0.677245
! Fit after  self-cal, rms=0.043006Jy  sigma=0.677193
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.85368e-06 Jy
! Component: 100  -  total flux cleaned = -2.46002e-05 Jy
! Component: 150  -  total flux cleaned = -3.37465e-05 Jy
! Component: 200  -  total flux cleaned = -5.01414e-05 Jy
! Total flux subtracted in 200 components = -5.01414e-05 Jy
! Clean residual min=-0.000910 max=0.000912 Jy/beam
! Clean residual mean=-0.000002 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0874383 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 124 components and 0.0874383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042998Jy  sigma=0.677099
! Fit after  self-cal, rms=0.042998Jy  sigma=0.677080
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042998Jy  sigma=0.677080
! Fit after  self-cal, rms=0.043189Jy  sigma=0.676832
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.518 mas, bmaj=6.125 mas, bpa=5.396 degrees
! Estimated noise=0.290907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.16648e-06 Jy
! Component: 100  -  total flux cleaned = -4.93834e-05 Jy
! Component: 150  -  total flux cleaned = -6.5925e-05 Jy
! Component: 200  -  total flux cleaned = -7.2375e-05 Jy
! Total flux subtracted in 200 components = -7.2375e-05 Jy
! Clean residual min=-0.001013 max=0.000909 Jy/beam
! Clean residual mean=-0.000002 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0873659 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 141 components and 0.0873659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043184Jy  sigma=0.676772
! Fit after  self-cal, rms=0.043185Jy  sigma=0.676758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.38177e-05 Jy
! Component: 100  -  total flux cleaned = -4.04117e-05 Jy
! Component: 150  -  total flux cleaned = -4.62718e-05 Jy
! Component: 200  -  total flux cleaned = -5.18876e-05 Jy
! Total flux subtracted in 200 components = -5.18876e-05 Jy
! Clean residual min=-0.001021 max=0.000897 Jy/beam
! Clean residual mean=-0.000003 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.087314 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 147 components and 0.087314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043183Jy  sigma=0.676741
! Fit after  self-cal, rms=0.043182Jy  sigma=0.676736
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=2.78 mas, bpa=1.075 degrees
! Estimated noise=0.240668 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 2.78 at 1.075 degrees (North through East)
! Clean map  min=-0.0011327  max=0.071428 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7099 mas, bmaj=2.147 mas, bpa=5.859 degrees
! Estimated noise=0.512246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0546149 Jy
! Component: 100  -  total flux cleaned = 0.0711567 Jy
! Component: 150  -  total flux cleaned = 0.078003 Jy
! Component: 200  -  total flux cleaned = 0.0817362 Jy
! Total flux subtracted in 200 components = 0.0817362 Jy
! Clean residual min=-0.002000 max=0.001885 Jy/beam
! Clean residual mean=-0.000000 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.0817361 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0817361 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=2.78 mas, bpa=1.075 degrees
! Estimated noise=0.240668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284859 Jy
! Component: 100  -  total flux cleaned = 0.00435374 Jy
! Component: 150  -  total flux cleaned = 0.00525887 Jy
! Component: 200  -  total flux cleaned = 0.00547858 Jy
! Total flux subtracted in 200 components = 0.00547858 Jy
! Clean residual min=-0.000973 max=0.000893 Jy/beam
! Clean residual mean=-0.000001 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0872147 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 31 components and 0.0872147 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.518 mas, bmaj=6.125 mas, bpa=5.396 degrees
! Estimated noise=0.290907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002928 Jy
! Component: 100  -  total flux cleaned = 0.000372259 Jy
! Component: 150  -  total flux cleaned = 0.000436442 Jy
! Component: 200  -  total flux cleaned = 0.000463586 Jy
! Total flux subtracted in 200 components = 0.000463586 Jy
! Clean residual min=-0.001104 max=0.001019 Jy/beam
! Clean residual mean=-0.000002 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0876783 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.20959e-05 Jy
! Component: 100  -  total flux cleaned = -2.27779e-05 Jy
! Component: 150  -  total flux cleaned = -2.32775e-05 Jy
! Component: 200  -  total flux cleaned = -3.27269e-05 Jy
! Total flux subtracted in 200 components = -3.27269e-05 Jy
! Clean residual min=-0.001093 max=0.001016 Jy/beam
! Clean residual mean=-0.000002 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0876456 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 51 components and 0.0876456 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=2.78 mas, bpa=1.075 degrees
! Estimated noise=0.240668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.13739e-05 Jy
! Component: 100  -  total flux cleaned = 3.8876e-05 Jy
! Component: 150  -  total flux cleaned = -1.12879e-05 Jy
! Component: 200  -  total flux cleaned = -1.13211e-05 Jy
! Total flux subtracted in 200 components = -1.13211e-05 Jy
! Clean residual min=-0.000914 max=0.000896 Jy/beam
! Clean residual mean=-0.000001 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0876343 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.0876342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043185Jy  sigma=0.677012
! Fit after  self-cal, rms=0.043176Jy  sigma=0.676893
wmodel /J1008-2901_X_map.mod
! wmodel: Unable to open new model file: /J1008-2901_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J1008-2901_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 2.78 at 1.075 degrees (North through East)
! Clean map  min=-0.0009109  max=0.072112 Jy/beam
! Writing clean map to FITS file: .//J1008-2901_X_map.fits
wmodel .//J1008-2901_X_map.mod
! Writing 68 model components to file: .//J1008-2901_X_map.mod
wobs   .//J1008-2901_X_uvs.fits
! Writing UV FITS file: .//J1008-2901_X_uvs.fits
wwins  .//J1008-2901_X_map.win
! wwins: Wrote 4 windows to .//J1008-2901_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0721121 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000201545 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.838464 0.838464 1.67693 3.35386 6.70771 13.4154 26.8309 53.6617
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.072 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  357.797 
quit
! Quitting program
! Log file .//J1008-2901_X_dfm.log closed on Wed Nov 16 11:55:43 2016