! Started logfile: .//J0748-1650_X_dfm.log on Wed Nov 16 11:53:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0748-1650_X_uvm.fits
! Reading UV FITS file: .//J0748-1650_X_uvm.fits
! AN table 1: 90 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.880247 visibilities/baseline/integration-bin.
! Found source: J0748-1650
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 28520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0748-1650_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007620Jy  sigma=28.033760
! Fit after  self-cal, rms=0.860086Jy  sigma=23.839384
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7229 mas, bmaj=1.953 mas, bpa=-3.541 degrees
! Estimated noise=0.277748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105032 Jy
! Component: 100  -  total flux cleaned = 0.127999 Jy
! Total flux subtracted in 100 components = 0.127999 Jy
! Clean residual min=-0.004586 max=0.011978 Jy/beam
! Clean residual mean=-0.000007 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.127999 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.127999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048016Jy  sigma=1.105706
! Fit after  self-cal, rms=0.048017Jy  sigma=1.105439
! Inverting map 
! Added new window around map position (-1.6, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112315 Jy
! Component: 100  -  total flux cleaned = 0.0181817 Jy
! Total flux subtracted in 100 components = 0.0181817 Jy
! Clean residual min=-0.003449 max=0.006516 Jy/beam
! Clean residual mean=-0.000005 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.14618 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.14618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043038Jy  sigma=0.920997
! Fit after  self-cal, rms=0.042640Jy  sigma=0.909714
! Inverting map 
! Added new window around map position (1, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00651874 Jy
! Component: 100  -  total flux cleaned = 0.0110085 Jy
! Total flux subtracted in 100 components = 0.0110085 Jy
! Clean residual min=-0.002363 max=0.003834 Jy/beam
! Clean residual mean=-0.000005 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.157189 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.157189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040652Jy  sigma=0.830617
! Fit after  self-cal, rms=0.040559Jy  sigma=0.827986
! Inverting map 
! Added new window around map position (-1.6, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00387431 Jy
! Component: 100  -  total flux cleaned = 0.00678162 Jy
! Total flux subtracted in 100 components = 0.00678162 Jy
! Clean residual min=-0.002085 max=0.002905 Jy/beam
! Clean residual mean=-0.000004 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.16397 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 49 components and 0.16397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039694Jy  sigma=0.792047
! Fit after  self-cal, rms=0.039662Jy  sigma=0.791164
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9879 mas, bmaj=2.456 mas, bpa=-2.098 degrees
! Estimated noise=0.155314 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557939 Jy
! Component: 100  -  total flux cleaned = 0.00914644 Jy
! Component: 150  -  total flux cleaned = 0.0117384 Jy
! Component: 200  -  total flux cleaned = 0.0137043 Jy
! Total flux subtracted in 200 components = 0.0137043 Jy
! Clean residual min=-0.001772 max=0.002429 Jy/beam
! Clean residual mean=-0.000010 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.177675 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 87 components and 0.177675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038771Jy  sigma=0.753657
! Fit after  self-cal, rms=0.038740Jy  sigma=0.752530
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9879 x 2.456 at -2.098 degrees (North through East)
! Clean map  min=-0.0017287  max=0.1348 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.01     KP        1.05     
!   LA        0.94     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.01     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.00     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.03     KP        1.05     
!   LA        0.95     MK        1.02     NL        1.04     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.02     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.02     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.02     KP        1.06     
!   LA        0.96     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.95     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.038740Jy  sigma=0.752530
! Fit after  self-cal, rms=0.038892Jy  sigma=0.725291
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9928 mas, bmaj=2.47 mas, bpa=-2.006 degrees
! Estimated noise=0.154803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116523 Jy
! Component: 100  -  total flux cleaned = 0.00105706 Jy
! Component: 150  -  total flux cleaned = 0.000820108 Jy
! Component: 200  -  total flux cleaned = 0.000627234 Jy
! Total flux subtracted in 200 components = 0.000627234 Jy
! Clean residual min=-0.000875 max=0.000915 Jy/beam
! Clean residual mean=-0.000005 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.178302 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 116 components and 0.178302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038781Jy  sigma=0.721465
! Fit after  self-cal, rms=0.038781Jy  sigma=0.721238
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038781Jy  sigma=0.721238
! Fit after  self-cal, rms=0.038710Jy  sigma=0.717727
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9931 mas, bmaj=2.471 mas, bpa=-1.984 degrees
! Estimated noise=0.154527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000293485 Jy
! Component: 100  -  total flux cleaned = -0.000419726 Jy
! Component: 150  -  total flux cleaned = -0.000507192 Jy
! Component: 200  -  total flux cleaned = -0.000569068 Jy
! Total flux subtracted in 200 components = -0.000569068 Jy
! Clean residual min=-0.000720 max=0.000824 Jy/beam
! Clean residual mean=-0.000005 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.177733 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 135 components and 0.177733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038685Jy  sigma=0.716943
! Fit after  self-cal, rms=0.038684Jy  sigma=0.716901
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000753909 Jy
! Component: 100  -  total flux cleaned = 0.00112702 Jy
! Component: 150  -  total flux cleaned = 0.00128591 Jy
! Component: 200  -  total flux cleaned = 0.00131131 Jy
! Total flux subtracted in 200 components = 0.00131131 Jy
! Clean residual min=-0.000679 max=0.000662 Jy/beam
! Clean residual mean=-0.000005 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.179044 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 162 components and 0.179044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038665Jy  sigma=0.716215
! Fit after  self-cal, rms=0.038662Jy  sigma=0.716174
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038662Jy  sigma=0.716174
! Fit after  self-cal, rms=0.038526Jy  sigma=0.712004
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.993 mas, bmaj=2.471 mas, bpa=-1.944 degrees
! Estimated noise=0.154457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000175011 Jy
! Component: 100  -  total flux cleaned = -6.00852e-05 Jy
! Component: 150  -  total flux cleaned = 1.31569e-05 Jy
! Component: 200  -  total flux cleaned = 3.56496e-05 Jy
! Total flux subtracted in 200 components = 3.56496e-05 Jy
! Clean residual min=-0.000618 max=0.000624 Jy/beam
! Clean residual mean=-0.000002 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.17908 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 177 components and 0.17908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038517Jy  sigma=0.711646
! Fit after  self-cal, rms=0.038518Jy  sigma=0.711619
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-18, 24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000529756 Jy
! Component: 100  -  total flux cleaned = 0.000580241 Jy
! Component: 150  -  total flux cleaned = 0.000580068 Jy
! Component: 200  -  total flux cleaned = 0.00057016 Jy
! Total flux subtracted in 200 components = 0.00057016 Jy
! Clean residual min=-0.000593 max=0.000542 Jy/beam
! Clean residual mean=-0.000002 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.17965 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 195 components and 0.17965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038506Jy  sigma=0.711277
! Fit after  self-cal, rms=0.038505Jy  sigma=0.711254
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038505Jy  sigma=0.711254
! Fit after  self-cal, rms=0.038502Jy  sigma=0.711143
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=4.588 mas, bpa=0.2838 degrees
! Estimated noise=0.185875 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.78174e-05 Jy
! Component: 100  -  total flux cleaned = -4.79351e-05 Jy
! Component: 150  -  total flux cleaned = -3.82919e-05 Jy
! Component: 200  -  total flux cleaned = -4.62644e-05 Jy
! Total flux subtracted in 200 components = -4.62644e-05 Jy
! Clean residual min=-0.000572 max=0.000617 Jy/beam
! Clean residual mean=-0.000004 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.179604 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 208 components and 0.179604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038498Jy  sigma=0.711055
! Fit after  self-cal, rms=0.038496Jy  sigma=0.711038
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.05695e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103001 Jy
! Component: 150  -  total flux cleaned = 8.35563e-05 Jy
! Component: 200  -  total flux cleaned = 6.53324e-05 Jy
! Total flux subtracted in 200 components = 6.53324e-05 Jy
! Clean residual min=-0.000571 max=0.000602 Jy/beam
! Clean residual mean=-0.000004 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.179669 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 218 components and 0.179669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038494Jy  sigma=0.711004
! Fit after  self-cal, rms=0.038493Jy  sigma=0.711000
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9927 mas, bmaj=2.471 mas, bpa=-1.931 degrees
! Estimated noise=0.154398 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9927 x 2.471 at -1.931 degrees (North through East)
! Clean map  min=-0.00061692  max=0.13419 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7246 mas, bmaj=1.957 mas, bpa=-3.392 degrees
! Estimated noise=0.278481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105253 Jy
! Component: 100  -  total flux cleaned = 0.129879 Jy
! Component: 150  -  total flux cleaned = 0.141418 Jy
! Component: 200  -  total flux cleaned = 0.149085 Jy
! Total flux subtracted in 200 components = 0.149085 Jy
! Clean residual min=-0.001705 max=0.004335 Jy/beam
! Clean residual mean=-0.000003 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.149085 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.149085 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9927 mas, bmaj=2.471 mas, bpa=-1.931 degrees
! Estimated noise=0.154398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00991423 Jy
! Component: 100  -  total flux cleaned = 0.0155611 Jy
! Component: 150  -  total flux cleaned = 0.0191108 Jy
! Component: 200  -  total flux cleaned = 0.0215112 Jy
! Total flux subtracted in 200 components = 0.0215112 Jy
! Clean residual min=-0.000812 max=0.001403 Jy/beam
! Clean residual mean=-0.000004 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.170596 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 78 components and 0.170596 Jy
! Inverting map 
! Added new window around map position (1, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174674 Jy
! Component: 100  -  total flux cleaned = 0.0030735 Jy
! Component: 150  -  total flux cleaned = 0.00412757 Jy
! Component: 200  -  total flux cleaned = 0.00499778 Jy
! Total flux subtracted in 200 components = 0.00499778 Jy
! Clean residual min=-0.000641 max=0.000854 Jy/beam
! Clean residual mean=-0.000003 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.175594 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 120 components and 0.175594 Jy
! Inverting map 
! Added new window around map position (-6, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000841957 Jy
! Component: 100  -  total flux cleaned = 0.00148825 Jy
! Component: 150  -  total flux cleaned = 0.00197587 Jy
! Component: 200  -  total flux cleaned = 0.00228771 Jy
! Total flux subtracted in 200 components = 0.00228771 Jy
! Clean residual min=-0.000586 max=0.000512 Jy/beam
! Clean residual mean=-0.000003 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.177881 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 146 components and 0.177881 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=4.588 mas, bpa=0.2838 degrees
! Estimated noise=0.185875 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449102 Jy
! Component: 100  -  total flux cleaned = 0.000681563 Jy
! Component: 150  -  total flux cleaned = 0.000884993 Jy
! Component: 200  -  total flux cleaned = 0.000995412 Jy
! Total flux subtracted in 200 components = 0.000995412 Jy
! Clean residual min=-0.000530 max=0.000523 Jy/beam
! Clean residual mean=-0.000004 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.178877 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.58838e-05 Jy
! Component: 100  -  total flux cleaned = 0.000153466 Jy
! Component: 150  -  total flux cleaned = 0.000205475 Jy
! Component: 200  -  total flux cleaned = 0.000237268 Jy
! Total flux subtracted in 200 components = 0.000237268 Jy
! Clean residual min=-0.000556 max=0.000521 Jy/beam
! Clean residual mean=-0.000004 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.179114 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 201 components and 0.179114 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9927 mas, bmaj=2.471 mas, bpa=-1.931 degrees
! Estimated noise=0.154398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.94896e-06 Jy
! Component: 100  -  total flux cleaned = 9.95e-05 Jy
! Component: 150  -  total flux cleaned = 0.000141438 Jy
! Component: 200  -  total flux cleaned = 0.000161124 Jy
! Total flux subtracted in 200 components = 0.000161124 Jy
! Clean residual min=-0.000592 max=0.000476 Jy/beam
! Clean residual mean=-0.000002 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.179275 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 224 components and 0.179275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038487Jy  sigma=0.710540
! Fit after  self-cal, rms=0.038479Jy  sigma=0.710362
wmodel /J0748-1650_X_map.mod
! wmodel: Unable to open new model file: /J0748-1650_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0748-1650_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9927 x 2.471 at -1.931 degrees (North through East)
! Clean map  min=-0.00053498  max=0.13446 Jy/beam
! Writing clean map to FITS file: .//J0748-1650_X_map.fits
wmodel .//J0748-1650_X_map.mod
! Writing 224 model components to file: .//J0748-1650_X_map.mod
wobs   .//J0748-1650_X_uvs.fits
! Writing UV FITS file: .//J0748-1650_X_uvs.fits
wwins  .//J0748-1650_X_map.win
! wwins: Wrote 9 windows to .//J0748-1650_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.134464 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000124206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.277112 0.277112 0.554224 1.10845 2.2169 4.43379 8.86759 17.7352 35.4703 70.9407
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.134 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1082.59 
quit
! Quitting program
! Log file .//J0748-1650_X_dfm.log closed on Wed Nov 16 11:53:09 2016