! Started logfile: .//J0609-1542_X_dfm.log on Wed Nov 16 11:51:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0609-1542_X_uva.fits
! Reading UV FITS file: .//J0609-1542_X_uva.fits
! AN table 1: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.954167 visibilities/baseline/integration-bin.
! Found source: J0609-1542
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 5496 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0609-1542_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.173465Jy  sigma=53.767189
! Fit after  self-cal, rms=1.097339Jy  sigma=26.794790
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=3.028 mas, bpa=3.621 degrees
! Estimated noise=0.555794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.26457 Jy
! Component: 100  -  total flux cleaned = 1.73154 Jy
! Total flux subtracted in 100 components = 1.73154 Jy
! Clean residual min=-0.111356 max=0.346542 Jy/beam
! Clean residual mean=0.000691 rms=0.043170 Jy/beam
! Combined flux in latest and established models = 1.73154 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.73154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.586617Jy  sigma=14.090126
! Fit after  self-cal, rms=0.582637Jy  sigma=13.999755
! Inverting map 
! Added new window around map position (1.4, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.320451 Jy
! Component: 100  -  total flux cleaned = 0.481314 Jy
! Total flux subtracted in 100 components = 0.481314 Jy
! Clean residual min=-0.069931 max=0.087904 Jy/beam
! Clean residual mean=0.000370 rms=0.018571 Jy/beam
! Combined flux in latest and established models = 2.21285 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 2.21285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.271591Jy  sigma=6.366280
! Fit after  self-cal, rms=0.257446Jy  sigma=5.989055
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.325 mas, bmaj=3.317 mas, bpa=2.073 degrees
! Estimated noise=0.388227 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.149088 Jy
! Component: 100  -  total flux cleaned = 0.226084 Jy
! Component: 150  -  total flux cleaned = 0.273189 Jy
! Component: 200  -  total flux cleaned = 0.304276 Jy
! Total flux subtracted in 200 components = 0.304276 Jy
! Clean residual min=-0.046729 max=0.051117 Jy/beam
! Clean residual mean=0.000165 rms=0.013412 Jy/beam
! Combined flux in latest and established models = 2.51713 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 39 components and 2.51713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.140568Jy  sigma=3.348184
! Fit after  self-cal, rms=0.137742Jy  sigma=3.277250
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.325 x 3.317 at 2.073 degrees (North through East)
! Clean map  min=-0.045172  max=1.7505 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.92     HN        0.98     KP        1.05     
!   LA        0.98     NL        1.02     OV        0.99     PT        0.95     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.92     HN        0.99     KP        1.05     
!   LA        0.98     NL        1.03     OV        0.99     PT        0.95     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        0.97     KP        1.05     
!   LA        0.98     NL        1.02     OV        1.00     PT        0.95     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        0.99     KP        1.05     
!   LA        0.99     NL        1.02     OV        1.00     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.92     HN        0.99     KP        1.07     
!   LA        0.99     NL        1.02     OV        1.01     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.91     HN        0.99     KP        1.06     
!   LA        1.00     NL        1.02     OV        1.02     PT        0.95     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        0.99     KP        1.06     
!   LA        1.00     NL        1.02     OV        1.01     PT        0.95     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.91     HN        0.99     KP        1.05     
!   LA        0.99     NL        1.01     OV        1.01     PT        0.94     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.137742Jy  sigma=3.277250
! Fit after  self-cal, rms=0.069589Jy  sigma=1.695763
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.324 mas, bmaj=3.336 mas, bpa=1.988 degrees
! Estimated noise=0.385765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00397262 Jy
! Component: 100  -  total flux cleaned = -0.00625475 Jy
! Component: 150  -  total flux cleaned = -0.00805885 Jy
! Component: 200  -  total flux cleaned = -0.00952877 Jy
! Total flux subtracted in 200 components = -0.00952877 Jy
! Clean residual min=-0.017356 max=0.024194 Jy/beam
! Clean residual mean=0.000016 rms=0.005731 Jy/beam
! Combined flux in latest and established models = 2.5076 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 2.5076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063522Jy  sigma=1.545193
! Fit after  self-cal, rms=0.063054Jy  sigma=1.533018
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063054Jy  sigma=1.533018
! Fit after  self-cal, rms=0.062673Jy  sigma=1.525612
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.323 mas, bmaj=3.336 mas, bpa=2.022 degrees
! Estimated noise=0.385333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00389662 Jy
! Component: 100  -  total flux cleaned = -0.0048826 Jy
! Component: 150  -  total flux cleaned = -0.0055051 Jy
! Component: 200  -  total flux cleaned = -0.00586731 Jy
! Total flux subtracted in 200 components = -0.00586731 Jy
! Clean residual min=-0.015387 max=0.024762 Jy/beam
! Clean residual mean=0.000013 rms=0.005523 Jy/beam
! Combined flux in latest and established models = 2.50173 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 56 components and 2.50173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060940Jy  sigma=1.482167
! Fit after  self-cal, rms=0.060839Jy  sigma=1.479877
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.6, 13.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221532 Jy
! Component: 100  -  total flux cleaned = 0.0326145 Jy
! Component: 150  -  total flux cleaned = 0.0364282 Jy
! Component: 200  -  total flux cleaned = 0.0382674 Jy
! Total flux subtracted in 200 components = 0.0382674 Jy
! Clean residual min=-0.012678 max=0.023775 Jy/beam
! Clean residual mean=0.000025 rms=0.004436 Jy/beam
! Combined flux in latest and established models = 2.54 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 82 components and 2.54 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051831Jy  sigma=1.265770
! Fit after  self-cal, rms=0.051469Jy  sigma=1.258084
! Inverting map 
! Added new window around map position (8.2, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021564 Jy
! Component: 100  -  total flux cleaned = 0.033189 Jy
! Component: 150  -  total flux cleaned = 0.0413808 Jy
! Component: 200  -  total flux cleaned = 0.0481999 Jy
! Total flux subtracted in 200 components = 0.0481999 Jy
! Clean residual min=-0.009845 max=0.008724 Jy/beam
! Clean residual mean=0.000001 rms=0.002539 Jy/beam
! Combined flux in latest and established models = 2.5882 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 138 components and 2.5882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040710Jy  sigma=0.981785
! Fit after  self-cal, rms=0.040499Jy  sigma=0.978334
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040499Jy  sigma=0.978334
! Fit after  self-cal, rms=0.039506Jy  sigma=0.952027
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.324 mas, bmaj=3.339 mas, bpa=2.045 degrees
! Estimated noise=0.385158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00732053 Jy
! Component: 100  -  total flux cleaned = 0.0125535 Jy
! Component: 150  -  total flux cleaned = 0.0166156 Jy
! Component: 200  -  total flux cleaned = 0.0201425 Jy
! Total flux subtracted in 200 components = 0.0201425 Jy
! Clean residual min=-0.007748 max=0.006924 Jy/beam
! Clean residual mean=-0.000008 rms=0.001842 Jy/beam
! Combined flux in latest and established models = 2.60834 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 167 components and 2.60834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037201Jy  sigma=0.891783
! Fit after  self-cal, rms=0.037118Jy  sigma=0.890504
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033273 Jy
! Component: 100  -  total flux cleaned = 0.00616939 Jy
! Component: 150  -  total flux cleaned = 0.0084653 Jy
! Component: 200  -  total flux cleaned = 0.0105696 Jy
! Total flux subtracted in 200 components = 0.0105696 Jy
! Clean residual min=-0.006756 max=0.005727 Jy/beam
! Clean residual mean=-0.000010 rms=0.001607 Jy/beam
! Combined flux in latest and established models = 2.61891 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 190 components and 2.61891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036249Jy  sigma=0.867574
! Fit after  self-cal, rms=0.036220Jy  sigma=0.867115
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036220Jy  sigma=0.867115
! Fit after  self-cal, rms=0.035995Jy  sigma=0.860954
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.249 mas, bmaj=4.328 mas, bpa=-9.351 degrees
! Estimated noise=0.449706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00495241 Jy
! Component: 100  -  total flux cleaned = 0.00771861 Jy
! Component: 150  -  total flux cleaned = 0.00999304 Jy
! Component: 200  -  total flux cleaned = 0.0117212 Jy
! Total flux subtracted in 200 components = 0.0117212 Jy
! Clean residual min=-0.006227 max=0.006096 Jy/beam
! Clean residual mean=-0.000018 rms=0.001621 Jy/beam
! Combined flux in latest and established models = 2.63063 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 217 components and 2.63063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035315Jy  sigma=0.841937
! Fit after  self-cal, rms=0.035291Jy  sigma=0.841488
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170765 Jy
! Component: 100  -  total flux cleaned = 0.00306984 Jy
! Component: 150  -  total flux cleaned = 0.00428487 Jy
! Component: 200  -  total flux cleaned = 0.00503775 Jy
! Total flux subtracted in 200 components = 0.00503775 Jy
! Clean residual min=-0.005671 max=0.005798 Jy/beam
! Clean residual mean=-0.000019 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 2.63567 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 234 components and 2.63567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035064Jy  sigma=0.835135
! Fit after  self-cal, rms=0.035054Jy  sigma=0.835016
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.325 mas, bmaj=3.341 mas, bpa=2.057 degrees
! Estimated noise=0.385157 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.325 x 3.341 at 2.057 degrees (North through East)
! Clean map  min=-0.0048708  max=1.734 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035054Jy  sigma=0.835016
! Fit after  self-cal, rms=0.030433Jy  sigma=0.719750
! Inverting map and beam 
! Estimated beam: bmin=1.325 mas, bmaj=3.342 mas, bpa=2.067 degrees
! Estimated noise=0.385197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000262934 Jy
! Component: 100  -  total flux cleaned = -0.00027256 Jy
! Component: 150  -  total flux cleaned = -0.000211347 Jy
! Component: 200  -  total flux cleaned = -0.000337961 Jy
! Total flux subtracted in 200 components = -0.000337961 Jy
! Clean residual min=-0.004770 max=0.004662 Jy/beam
! Clean residual mean=-0.000011 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 2.63533 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 252 components and 2.63533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030045Jy  sigma=0.709928
! Fit after  self-cal, rms=0.030029Jy  sigma=0.709694
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000325809 Jy
! Component: 100  -  total flux cleaned = 0.000488648 Jy
! Component: 150  -  total flux cleaned = 0.000539322 Jy
! Component: 200  -  total flux cleaned = 0.000637618 Jy
! Total flux subtracted in 200 components = 0.000637618 Jy
! Clean residual min=-0.004593 max=0.004484 Jy/beam
! Clean residual mean=-0.000010 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 2.63597 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 261 components and 2.63597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029858Jy  sigma=0.705628
! Fit after  self-cal, rms=0.029853Jy  sigma=0.705554
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029853Jy  sigma=0.705554
! Fit after  self-cal, rms=0.029806Jy  sigma=0.703964
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=3.033 mas, bpa=3.662 degrees
! Estimated noise=0.567008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.27254 Jy
! Component: 100  -  total flux cleaned = 1.77264 Jy
! Component: 150  -  total flux cleaned = 2.05027 Jy
! Component: 200  -  total flux cleaned = 2.21008 Jy
! Total flux subtracted in 200 components = 2.21008 Jy
! Clean residual min=-0.043564 max=0.080499 Jy/beam
! Clean residual mean=0.000193 rms=0.015224 Jy/beam
! Combined flux in latest and established models = 2.21008 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 2.21008 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=3.343 mas, bpa=2.074 degrees
! Estimated noise=0.385205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131197 Jy
! Component: 100  -  total flux cleaned = 0.199128 Jy
! Component: 150  -  total flux cleaned = 0.239356 Jy
! Component: 200  -  total flux cleaned = 0.26948 Jy
! Total flux subtracted in 200 components = 0.26948 Jy
! Clean residual min=-0.018964 max=0.019643 Jy/beam
! Clean residual mean=0.000040 rms=0.005910 Jy/beam
! Combined flux in latest and established models = 2.47956 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 38 components and 2.47956 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.25 mas, bmaj=4.331 mas, bpa=-9.347 degrees
! Estimated noise=0.449536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0317743 Jy
! Component: 100  -  total flux cleaned = 0.0559744 Jy
! Component: 150  -  total flux cleaned = 0.0749832 Jy
! Component: 200  -  total flux cleaned = 0.090268 Jy
! Total flux subtracted in 200 components = 0.090268 Jy
! Clean residual min=-0.014583 max=0.012850 Jy/beam
! Clean residual mean=0.000006 rms=0.004203 Jy/beam
! Combined flux in latest and established models = 2.56983 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126132 Jy
! Component: 100  -  total flux cleaned = 0.0232106 Jy
! Component: 150  -  total flux cleaned = 0.0322538 Jy
! Component: 200  -  total flux cleaned = 0.0399879 Jy
! Total flux subtracted in 200 components = 0.0399879 Jy
! Clean residual min=-0.010884 max=0.009691 Jy/beam
! Clean residual mean=-0.000012 rms=0.002672 Jy/beam
! Combined flux in latest and established models = 2.60982 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 94 components and 2.60982 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=3.343 mas, bpa=2.074 degrees
! Estimated noise=0.385205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118882 Jy
! Component: 100  -  total flux cleaned = 0.00196461 Jy
! Component: 150  -  total flux cleaned = 0.00465482 Jy
! Component: 200  -  total flux cleaned = 0.00570552 Jy
! Total flux subtracted in 200 components = 0.00570552 Jy
! Clean residual min=-0.008059 max=0.008831 Jy/beam
! Clean residual mean=-0.000007 rms=0.002006 Jy/beam
! Combined flux in latest and established models = 2.61553 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 108 components and 2.61553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035555Jy  sigma=0.849063
! Fit after  self-cal, rms=0.034635Jy  sigma=0.824567
wmodel /J0609-1542_X_map.mod
! wmodel: Unable to open new model file: /J0609-1542_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0609-1542_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.326 x 3.343 at 2.074 degrees (North through East)
! Clean map  min=-0.0073783  max=1.7557 Jy/beam
! Writing clean map to FITS file: .//J0609-1542_X_map.fits
wmodel .//J0609-1542_X_map.mod
! Writing 108 model components to file: .//J0609-1542_X_map.mod
wobs   .//J0609-1542_X_uvs.fits
! Writing UV FITS file: .//J0609-1542_X_uvs.fits
wwins  .//J0609-1542_X_map.win
! wwins: Wrote 4 windows to .//J0609-1542_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.75571 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00186912 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.31938 0.31938 0.63876 1.27752 2.55504 5.11008 10.2202 20.4403 40.8806 81.7612
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0056 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.755 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  939.32 
quit
! Quitting program
! Log file .//J0609-1542_X_dfm.log closed on Wed Nov 16 11:51:17 2016