! Started logfile: .//J0607+6720_X_dfm.log on Wed Nov 16 11:51:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0607+6720_X_uva.fits
! Reading UV FITS file: .//J0607+6720_X_uva.fits
! AN table 1: 118 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.96516 visibilities/baseline/integration-bin.
! Found source: J0607+6720
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 32800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0607+6720_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042912Jy  sigma=30.290917
! Fit after  self-cal, rms=0.735021Jy  sigma=21.494679
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6949 mas, bmaj=3.02 mas, bpa=-86.51 degrees
! Estimated noise=0.349661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157838 Jy
! Component: 100  -  total flux cleaned = 0.222703 Jy
! Total flux subtracted in 100 components = 0.222703 Jy
! Clean residual min=-0.020516 max=0.032979 Jy/beam
! Clean residual mean=-0.000069 rms=0.005285 Jy/beam
! Combined flux in latest and established models = 0.222703 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.222703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.134722Jy  sigma=3.631399
! Fit after  self-cal, rms=0.134597Jy  sigma=3.628143
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0392491 Jy
! Component: 100  -  total flux cleaned = 0.0638375 Jy
! Total flux subtracted in 100 components = 0.0638375 Jy
! Clean residual min=-0.016457 max=0.034277 Jy/beam
! Clean residual mean=-0.000050 rms=0.003946 Jy/beam
! Combined flux in latest and established models = 0.286541 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.286541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.097047Jy  sigma=2.569228
! Fit after  self-cal, rms=0.096907Jy  sigma=2.564464
! Inverting map 
! Added new window around map position (0.4, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.030112 Jy
! Component: 100  -  total flux cleaned = 0.0475774 Jy
! Total flux subtracted in 100 components = 0.0475774 Jy
! Clean residual min=-0.016162 max=0.018708 Jy/beam
! Clean residual mean=-0.000036 rms=0.002917 Jy/beam
! Combined flux in latest and established models = 0.334118 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.334118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.071359Jy  sigma=1.854221
! Fit after  self-cal, rms=0.070360Jy  sigma=1.816821
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9822 mas, bmaj=3.172 mas, bpa=-87.35 degrees
! Estimated noise=0.136705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357883 Jy
! Component: 100  -  total flux cleaned = 0.0544804 Jy
! Component: 150  -  total flux cleaned = 0.066199 Jy
! Component: 200  -  total flux cleaned = 0.074147 Jy
! Total flux subtracted in 200 components = 0.074147 Jy
! Clean residual min=-0.014529 max=0.015874 Jy/beam
! Clean residual mean=-0.000095 rms=0.003212 Jy/beam
! Combined flux in latest and established models = 0.408265 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 56 components and 0.408265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045455Jy  sigma=1.223124
! Fit after  self-cal, rms=0.044065Jy  sigma=1.172947
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9822 x 3.172 at -87.35 degrees (North through East)
! Clean map  min=-0.014217  max=0.25408 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.03     KP        1.07     
!   LA        0.84     MK        1.05     NL        1.11     OV        1.02     
!   PT        0.97     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.03     KP        1.07     
!   LA        0.85     MK        1.04     NL        1.11     OV        1.03     
!   PT        0.96     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        1.06     
!   LA        0.84     MK        1.05     NL        1.10     OV        1.02     
!   PT        0.97     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        1.06     
!   LA        0.85     MK        1.02     NL        1.09     OV        1.02     
!   PT        0.96     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.01     KP        1.06     
!   LA        0.84     MK        0.99     NL        1.10     OV        1.01     
!   PT        0.97     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        1.07     
!   LA        0.84     MK        0.99     NL        1.11     OV        1.02     
!   PT        0.97     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.05     
!   LA        0.84     MK        0.98     NL        1.10     OV        1.02     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.044065Jy  sigma=1.172947
! Fit after  self-cal, rms=0.031813Jy  sigma=0.887316
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9943 mas, bmaj=3.174 mas, bpa=-87.19 degrees
! Estimated noise=0.137236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418568 Jy
! Component: 100  -  total flux cleaned = 0.00312366 Jy
! Component: 150  -  total flux cleaned = 0.0025529 Jy
! Component: 200  -  total flux cleaned = 0.0021921 Jy
! Total flux subtracted in 200 components = 0.0021921 Jy
! Clean residual min=-0.003410 max=0.004678 Jy/beam
! Clean residual mean=-0.000013 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.410457 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 75 components and 0.410457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029877Jy  sigma=0.821200
! Fit after  self-cal, rms=0.029756Jy  sigma=0.817751
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029756Jy  sigma=0.817751
! Fit after  self-cal, rms=0.026976Jy  sigma=0.761252
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9937 mas, bmaj=3.176 mas, bpa=-87.12 degrees
! Estimated noise=0.136868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000952171 Jy
! Component: 100  -  total flux cleaned = -0.00135112 Jy
! Component: 150  -  total flux cleaned = -0.00186645 Jy
! Component: 200  -  total flux cleaned = -0.00231249 Jy
! Total flux subtracted in 200 components = -0.00231249 Jy
! Clean residual min=-0.002291 max=0.003550 Jy/beam
! Clean residual mean=-0.000008 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.408145 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 91 components and 0.408145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026358Jy  sigma=0.740216
! Fit after  self-cal, rms=0.026311Jy  sigma=0.738920
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325388 Jy
! Component: 100  -  total flux cleaned = 0.00393686 Jy
! Component: 150  -  total flux cleaned = 0.00427993 Jy
! Component: 200  -  total flux cleaned = 0.00439913 Jy
! Total flux subtracted in 200 components = 0.00439913 Jy
! Clean residual min=-0.001774 max=0.002208 Jy/beam
! Clean residual mean=-0.000004 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.412544 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 0.412544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025825Jy  sigma=0.722862
! Fit after  self-cal, rms=0.025814Jy  sigma=0.722536
! Inverting map 
! Added new window around map position (21.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180704 Jy
! Component: 100  -  total flux cleaned = 0.00206545 Jy
! Component: 150  -  total flux cleaned = 0.00215541 Jy
! Component: 200  -  total flux cleaned = 0.00227863 Jy
! Total flux subtracted in 200 components = 0.00227863 Jy
! Clean residual min=-0.001394 max=0.001753 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.414822 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 137 components and 0.414822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025623Jy  sigma=0.716353
! Fit after  self-cal, rms=0.025619Jy  sigma=0.716231
! Inverting map 
! Added new window around map position (-20.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124696 Jy
! Component: 100  -  total flux cleaned = 0.00145438 Jy
! Component: 150  -  total flux cleaned = 0.00180998 Jy
! Component: 200  -  total flux cleaned = 0.00200245 Jy
! Total flux subtracted in 200 components = 0.00200245 Jy
! Clean residual min=-0.001277 max=0.001242 Jy/beam
! Clean residual mean=-0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.416825 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 160 components and 0.416825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025493Jy  sigma=0.712283
! Fit after  self-cal, rms=0.025491Jy  sigma=0.712234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025491Jy  sigma=0.712234
! Fit after  self-cal, rms=0.025487Jy  sigma=0.711528
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9938 mas, bmaj=3.178 mas, bpa=-87.07 degrees
! Estimated noise=0.136941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184326 Jy
! Component: 100  -  total flux cleaned = 0.00011131 Jy
! Component: 150  -  total flux cleaned = 0.000189515 Jy
! Component: 200  -  total flux cleaned = 0.000236285 Jy
! Total flux subtracted in 200 components = 0.000236285 Jy
! Clean residual min=-0.001044 max=0.001109 Jy/beam
! Clean residual mean=0.000000 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.417061 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 171 components and 0.417061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025429Jy  sigma=0.709702
! Fit after  self-cal, rms=0.025429Jy  sigma=0.709681
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.8, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004675 Jy
! Component: 100  -  total flux cleaned = 0.000471676 Jy
! Component: 150  -  total flux cleaned = 0.00047108 Jy
! Component: 200  -  total flux cleaned = 0.000493974 Jy
! Total flux subtracted in 200 components = 0.000493974 Jy
! Clean residual min=-0.000973 max=0.000890 Jy/beam
! Clean residual mean=0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.417555 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 191 components and 0.417555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025368Jy  sigma=0.707799
! Fit after  self-cal, rms=0.025367Jy  sigma=0.707757
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025367Jy  sigma=0.707757
! Fit after  self-cal, rms=0.025358Jy  sigma=0.707621
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.321 mas, bmaj=4.033 mas, bpa=78.9 degrees
! Estimated noise=0.166353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.8073e-05 Jy
! Component: 100  -  total flux cleaned = -0.000111637 Jy
! Component: 150  -  total flux cleaned = -0.000192596 Jy
! Component: 200  -  total flux cleaned = -0.000227545 Jy
! Total flux subtracted in 200 components = -0.000227545 Jy
! Clean residual min=-0.000950 max=0.000819 Jy/beam
! Clean residual mean=0.000002 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.417327 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 215 components and 0.417327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025347Jy  sigma=0.707222
! Fit after  self-cal, rms=0.025347Jy  sigma=0.707213
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.17618e-05 Jy
! Component: 100  -  total flux cleaned = 0.000102181 Jy
! Component: 150  -  total flux cleaned = 9.29855e-05 Jy
! Component: 200  -  total flux cleaned = 9.33133e-05 Jy
! Total flux subtracted in 200 components = 9.33133e-05 Jy
! Clean residual min=-0.000948 max=0.000835 Jy/beam
! Clean residual mean=0.000002 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.417421 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 230 components and 0.417421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025341Jy  sigma=0.707015
! Fit after  self-cal, rms=0.025341Jy  sigma=0.707008
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9939 mas, bmaj=3.179 mas, bpa=-87.04 degrees
! Estimated noise=0.136869 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9939 x 3.179 at -87.04 degrees (North through East)
! Clean map  min=-0.0033774  max=0.25177 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7127 mas, bmaj=2.989 mas, bpa=-86.06 degrees
! Estimated noise=0.308936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161994 Jy
! Component: 100  -  total flux cleaned = 0.228977 Jy
! Component: 150  -  total flux cleaned = 0.273782 Jy
! Component: 200  -  total flux cleaned = 0.305153 Jy
! Total flux subtracted in 200 components = 0.305153 Jy
! Clean residual min=-0.010029 max=0.017496 Jy/beam
! Clean residual mean=-0.000034 rms=0.002768 Jy/beam
! Combined flux in latest and established models = 0.305153 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.305153 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9939 mas, bmaj=3.179 mas, bpa=-87.04 degrees
! Estimated noise=0.136869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0456143 Jy
! Component: 100  -  total flux cleaned = 0.0686403 Jy
! Component: 150  -  total flux cleaned = 0.0808699 Jy
! Component: 200  -  total flux cleaned = 0.0880655 Jy
! Total flux subtracted in 200 components = 0.0880655 Jy
! Clean residual min=-0.003183 max=0.007668 Jy/beam
! Clean residual mean=-0.000024 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.393219 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 57 components and 0.393219 Jy
! Inverting map 
! Added new window around map position (0.8, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00675133 Jy
! Component: 100  -  total flux cleaned = 0.0106602 Jy
! Component: 150  -  total flux cleaned = 0.013029 Jy
! Component: 200  -  total flux cleaned = 0.014481 Jy
! Total flux subtracted in 200 components = 0.014481 Jy
! Clean residual min=-0.001999 max=0.001886 Jy/beam
! Clean residual mean=-0.000007 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.4077 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 94 components and 0.4077 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.321 mas, bmaj=4.033 mas, bpa=78.9 degrees
! Estimated noise=0.166353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252271 Jy
! Component: 100  -  total flux cleaned = 0.00387157 Jy
! Component: 150  -  total flux cleaned = 0.00472672 Jy
! Component: 200  -  total flux cleaned = 0.00545339 Jy
! Total flux subtracted in 200 components = 0.00545339 Jy
! Clean residual min=-0.001293 max=0.001165 Jy/beam
! Clean residual mean=-0.000003 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.413153 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000714922 Jy
! Component: 100  -  total flux cleaned = 0.00133658 Jy
! Component: 150  -  total flux cleaned = 0.00191081 Jy
! Component: 200  -  total flux cleaned = 0.0023899 Jy
! Total flux subtracted in 200 components = 0.0023899 Jy
! Clean residual min=-0.001046 max=0.000946 Jy/beam
! Clean residual mean=-0.000001 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.415543 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 179 components and 0.415543 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9939 mas, bmaj=3.179 mas, bpa=-87.04 degrees
! Estimated noise=0.136869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000738253 Jy
! Component: 100  -  total flux cleaned = -0.00058502 Jy
! Component: 150  -  total flux cleaned = -0.000419443 Jy
! Component: 200  -  total flux cleaned = -0.000163736 Jy
! Total flux subtracted in 200 components = -0.000163736 Jy
! Clean residual min=-0.000991 max=0.000864 Jy/beam
! Clean residual mean=-0.000001 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.415379 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 207 components and 0.415379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025390Jy  sigma=0.708324
! Fit after  self-cal, rms=0.025370Jy  sigma=0.707465
wmodel /J0607+6720_X_map.mod
! wmodel: Unable to open new model file: /J0607+6720_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0607+6720_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9939 x 3.179 at -87.04 degrees (North through East)
! Clean map  min=-0.0015389  max=0.24839 Jy/beam
! Writing clean map to FITS file: .//J0607+6720_X_map.fits
wmodel .//J0607+6720_X_map.mod
! Writing 207 model components to file: .//J0607+6720_X_map.mod
wobs   .//J0607+6720_X_uvs.fits
! Writing UV FITS file: .//J0607+6720_X_uvs.fits
wwins  .//J0607+6720_X_map.win
! wwins: Wrote 8 windows to .//J0607+6720_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.248386 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000232019 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.280232 0.280232 0.560464 1.12093 2.24186 4.48371 8.96742 17.9348 35.8697 71.7394
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.248 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1070.54 
quit
! Quitting program
! Log file .//J0607+6720_X_dfm.log closed on Wed Nov 16 11:51:13 2016