! Started logfile: .//J0555+3948_X_dfm.log on Wed Nov 16 11:50:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0555+3948_X_uva.fits
! Reading UV FITS file: .//J0555+3948_X_uva.fits
! AN table 1: 64 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.866667 visibilities/baseline/integration-bin.
! Found source: J0555+3948
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 19968 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.925056Jy  sigma=93.268901
! Fit after  self-cal, rms=1.832324Jy  sigma=58.548128
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7829 mas, bmaj=2.483 mas, bpa=29.31 degrees
! Estimated noise=0.32172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.72668 Jy
! Component: 100  -  total flux cleaned = 2.40714 Jy
! Total flux subtracted in 100 components = 2.40714 Jy
! Clean residual min=-0.117960 max=0.332337 Jy/beam
! Clean residual mean=-0.000291 rms=0.026838 Jy/beam
! Combined flux in latest and established models = 2.40714 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 2.40714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.746444Jy  sigma=23.418305
! Fit after  self-cal, rms=0.744332Jy  sigma=23.357257
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.381048 Jy
! Component: 100  -  total flux cleaned = 0.593275 Jy
! Total flux subtracted in 100 components = 0.593275 Jy
! Clean residual min=-0.054572 max=0.103779 Jy/beam
! Clean residual mean=-0.000172 rms=0.011514 Jy/beam
! Combined flux in latest and established models = 3.00042 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 10 components and 3.00042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.357909Jy  sigma=10.846759
! Fit after  self-cal, rms=0.356778Jy  sigma=10.815208
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121621 Jy
! Component: 100  -  total flux cleaned = 0.197447 Jy
! Total flux subtracted in 100 components = 0.197447 Jy
! Clean residual min=-0.040245 max=0.050148 Jy/beam
! Clean residual mean=-0.000131 rms=0.008058 Jy/beam
! Combined flux in latest and established models = 3.19786 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 3.19786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.268795Jy  sigma=8.043981
! Fit after  self-cal, rms=0.268666Jy  sigma=8.040415
! Inverting map 
! Added new window around map position (3, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0591748 Jy
! Component: 100  -  total flux cleaned = 0.104302 Jy
! Total flux subtracted in 100 components = 0.104302 Jy
! Clean residual min=-0.033823 max=0.045440 Jy/beam
! Clean residual mean=-0.000110 rms=0.006838 Jy/beam
! Combined flux in latest and established models = 3.30217 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 3.30217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.237822Jy  sigma=7.109873
! Fit after  self-cal, rms=0.237445Jy  sigma=7.098632
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.051 mas, bmaj=2.693 mas, bpa=30.38 degrees
! Estimated noise=0.163382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0741491 Jy
! Component: 100  -  total flux cleaned = 0.125033 Jy
! Component: 150  -  total flux cleaned = 0.156897 Jy
! Component: 200  -  total flux cleaned = 0.174798 Jy
! Total flux subtracted in 200 components = 0.174798 Jy
! Clean residual min=-0.041479 max=0.050457 Jy/beam
! Clean residual mean=-0.000145 rms=0.010267 Jy/beam
! Combined flux in latest and established models = 3.47696 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 68 components and 3.47696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.204454Jy  sigma=6.140345
! Fit after  self-cal, rms=0.204075Jy  sigma=6.129658
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.051 x 2.693 at 30.38 degrees (North through East)
! Clean map  min=-0.040788  max=2.5609 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.95     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.00     KP        1.05     
!   LA        0.94     MK        1.00     NL        1.02     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.00     KP        1.05     
!   LA        0.94     MK        0.99     NL        1.03     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.00     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.02     KP        1.06     
!   LA        0.96     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.02     KP        1.06     
!   LA        0.96     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.01     KP        1.07     
!   LA        0.96     MK        1.02     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.02     KP        1.06     
!   LA        0.96     MK        1.01     NL        1.04     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.204075Jy  sigma=6.129658
! Fit after  self-cal, rms=0.153027Jy  sigma=4.473267
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=2.713 mas, bpa=30.45 degrees
! Estimated noise=0.163247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0122512 Jy
! Component: 100  -  total flux cleaned = -0.0144808 Jy
! Component: 150  -  total flux cleaned = -0.0155943 Jy
! Component: 200  -  total flux cleaned = -0.0167105 Jy
! Total flux subtracted in 200 components = -0.0167105 Jy
! Clean residual min=-0.015414 max=0.013686 Jy/beam
! Clean residual mean=-0.000022 rms=0.002973 Jy/beam
! Combined flux in latest and established models = 3.46025 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 81 components and 3.46025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.151204Jy  sigma=4.410806
! Fit after  self-cal, rms=0.151125Jy  sigma=4.408186
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.151125Jy  sigma=4.408186
! Fit after  self-cal, rms=0.150537Jy  sigma=4.395608
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=2.715 mas, bpa=30.49 degrees
! Estimated noise=0.163052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00861612 Jy
! Component: 100  -  total flux cleaned = -0.0107754 Jy
! Component: 150  -  total flux cleaned = -0.0120804 Jy
! Component: 200  -  total flux cleaned = -0.012839 Jy
! Total flux subtracted in 200 components = -0.012839 Jy
! Clean residual min=-0.014505 max=0.013207 Jy/beam
! Clean residual mean=-0.000021 rms=0.002813 Jy/beam
! Combined flux in latest and established models = 3.44741 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 3.44741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.149774Jy  sigma=4.371912
! Fit after  self-cal, rms=0.149734Jy  sigma=4.370601
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00125243 Jy
! Component: 100  -  total flux cleaned = -0.00205917 Jy
! Component: 150  -  total flux cleaned = -0.00244847 Jy
! Component: 200  -  total flux cleaned = -0.00270779 Jy
! Total flux subtracted in 200 components = -0.00270779 Jy
! Clean residual min=-0.014161 max=0.013688 Jy/beam
! Clean residual mean=-0.000022 rms=0.002796 Jy/beam
! Combined flux in latest and established models = 3.44471 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 94 components and 3.44471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.149579Jy  sigma=4.366130
! Fit after  self-cal, rms=0.149567Jy  sigma=4.365760
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.149567Jy  sigma=4.365760
! Fit after  self-cal, rms=0.145231Jy  sigma=4.152564
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=2.717 mas, bpa=30.51 degrees
! Estimated noise=0.162906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00693511 Jy
! Component: 100  -  total flux cleaned = -0.0074062 Jy
! Component: 150  -  total flux cleaned = -0.00765903 Jy
! Component: 200  -  total flux cleaned = -0.00776372 Jy
! Total flux subtracted in 200 components = -0.00776372 Jy
! Clean residual min=-0.007338 max=0.006740 Jy/beam
! Clean residual mean=-0.000005 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 3.43694 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 100 components and 3.43694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.144787Jy  sigma=4.139633
! Fit after  self-cal, rms=0.144751Jy  sigma=4.138488
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00165382 Jy
! Component: 100  -  total flux cleaned = -0.00156968 Jy
! Component: 150  -  total flux cleaned = -0.00149948 Jy
! Component: 200  -  total flux cleaned = -0.00149838 Jy
! Total flux subtracted in 200 components = -0.00149838 Jy
! Clean residual min=-0.006904 max=0.006722 Jy/beam
! Clean residual mean=-0.000006 rms=0.001205 Jy/beam
! Combined flux in latest and established models = 3.43544 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 108 components and 3.43544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.144654Jy  sigma=4.135833
! Fit after  self-cal, rms=0.144643Jy  sigma=4.135556
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.144643Jy  sigma=4.135556
! Fit after  self-cal, rms=0.144370Jy  sigma=4.128069
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.114 mas, bmaj=3.053 mas, bpa=26.01 degrees
! Estimated noise=0.192243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00597154 Jy
! Component: 100  -  total flux cleaned = -0.00754459 Jy
! Component: 150  -  total flux cleaned = -0.00791327 Jy
! Component: 200  -  total flux cleaned = -0.00797528 Jy
! Total flux subtracted in 200 components = -0.00797528 Jy
! Clean residual min=-0.006166 max=0.007984 Jy/beam
! Clean residual mean=-0.000006 rms=0.001494 Jy/beam
! Combined flux in latest and established models = 3.42747 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 112 components and 3.42747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.144184Jy  sigma=4.123327
! Fit after  self-cal, rms=0.144155Jy  sigma=4.122303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00669223 Jy
! Component: 100  -  total flux cleaned = 0.00761148 Jy
! Component: 150  -  total flux cleaned = 0.0080627 Jy
! Component: 200  -  total flux cleaned = 0.00806244 Jy
! Total flux subtracted in 200 components = 0.00806244 Jy
! Clean residual min=-0.004342 max=0.004318 Jy/beam
! Clean residual mean=-0.000010 rms=0.001145 Jy/beam
! Combined flux in latest and established models = 3.43553 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 138 components and 3.43553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.143842Jy  sigma=4.110684
! Fit after  self-cal, rms=0.143831Jy  sigma=4.110366
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.051 mas, bmaj=2.718 mas, bpa=30.53 degrees
! Estimated noise=0.162782 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.051 x 2.718 at 30.53 degrees (North through East)
! Clean map  min=-0.0044147  max=2.5481 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.143831Jy  sigma=4.110366
! Fit after  self-cal, rms=0.138517Jy  sigma=3.929782
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=2.719 mas, bpa=30.55 degrees
! Estimated noise=0.162183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0106814 Jy
! Component: 100  -  total flux cleaned = -0.0158379 Jy
! Component: 150  -  total flux cleaned = -0.0174483 Jy
! Component: 200  -  total flux cleaned = -0.0180534 Jy
! Total flux subtracted in 200 components = -0.0180534 Jy
! Clean residual min=-0.006062 max=0.005005 Jy/beam
! Clean residual mean=-0.000007 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 3.41748 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 167 components and 3.41748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.137493Jy  sigma=3.902416
! Fit after  self-cal, rms=0.137478Jy  sigma=3.901879
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00112884 Jy
! Component: 100  -  total flux cleaned = -0.000898505 Jy
! Component: 150  -  total flux cleaned = -0.00100966 Jy
! Component: 200  -  total flux cleaned = -0.00110069 Jy
! Total flux subtracted in 200 components = -0.00110069 Jy
! Clean residual min=-0.005637 max=0.005398 Jy/beam
! Clean residual mean=-0.000010 rms=0.001188 Jy/beam
! Combined flux in latest and established models = 3.41638 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 180 components and 3.41638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.137288Jy  sigma=3.897225
! Fit after  self-cal, rms=0.137285Jy  sigma=3.897104
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.137285Jy  sigma=3.897104
! Fit after  self-cal, rms=0.136726Jy  sigma=3.877095
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7827 mas, bmaj=2.5 mas, bpa=29.46 degrees
! Estimated noise=0.319107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.71317 Jy
! Component: 100  -  total flux cleaned = 2.39198 Jy
! Component: 150  -  total flux cleaned = 2.76506 Jy
! Component: 200  -  total flux cleaned = 2.9726 Jy
! Total flux subtracted in 200 components = 2.9726 Jy
! Clean residual min=-0.038269 max=0.100849 Jy/beam
! Clean residual mean=-0.000095 rms=0.008746 Jy/beam
! Combined flux in latest and established models = 2.97259 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 2.97259 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=2.719 mas, bpa=30.56 degrees
! Estimated noise=0.161614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.183424 Jy
! Component: 100  -  total flux cleaned = 0.267502 Jy
! Component: 150  -  total flux cleaned = 0.316349 Jy
! Component: 200  -  total flux cleaned = 0.346972 Jy
! Total flux subtracted in 200 components = 0.346972 Jy
! Clean residual min=-0.007920 max=0.016238 Jy/beam
! Clean residual mean=-0.000044 rms=0.003155 Jy/beam
! Combined flux in latest and established models = 3.31957 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 39 components and 3.31957 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202614 Jy
! Component: 100  -  total flux cleaned = 0.034606 Jy
! Component: 150  -  total flux cleaned = 0.0450179 Jy
! Component: 200  -  total flux cleaned = 0.0529367 Jy
! Total flux subtracted in 200 components = 0.0529367 Jy
! Clean residual min=-0.005692 max=0.007547 Jy/beam
! Clean residual mean=-0.000017 rms=0.001634 Jy/beam
! Combined flux in latest and established models = 3.3725 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 60 components and 3.3725 Jy
! Inverting map 
! Added new window around map position (46.4, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00699822 Jy
! Component: 100  -  total flux cleaned = 0.0111765 Jy
! Component: 150  -  total flux cleaned = 0.0143938 Jy
! Component: 200  -  total flux cleaned = 0.0172542 Jy
! Total flux subtracted in 200 components = 0.0172542 Jy
! Clean residual min=-0.005153 max=0.006229 Jy/beam
! Clean residual mean=-0.000015 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 3.38976 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 92 components and 3.38976 Jy
! Inverting map 
! Added new window around map position (-45.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00654009 Jy
! Component: 100  -  total flux cleaned = 0.00893462 Jy
! Component: 150  -  total flux cleaned = 0.0100331 Jy
! Component: 200  -  total flux cleaned = 0.0111788 Jy
! Total flux subtracted in 200 components = 0.0111788 Jy
! Clean residual min=-0.004814 max=0.004113 Jy/beam
! Clean residual mean=-0.000012 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 3.40094 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 124 components and 3.40094 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.117 mas, bmaj=3.054 mas, bpa=26.15 degrees
! Estimated noise=0.190587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501035 Jy
! Component: 100  -  total flux cleaned = 0.00690211 Jy
! Component: 150  -  total flux cleaned = 0.00800066 Jy
! Component: 200  -  total flux cleaned = 0.00897308 Jy
! Total flux subtracted in 200 components = 0.00897308 Jy
! Clean residual min=-0.005074 max=0.004305 Jy/beam
! Clean residual mean=-0.000021 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 3.40991 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394035 Jy
! Component: 100  -  total flux cleaned = 0.000670704 Jy
! Component: 150  -  total flux cleaned = 0.000935307 Jy
! Component: 200  -  total flux cleaned = 0.00127142 Jy
! Total flux subtracted in 200 components = 0.00127142 Jy
! Clean residual min=-0.004657 max=0.004193 Jy/beam
! Clean residual mean=-0.000021 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 3.41118 Jy
! Adding 101 model components to the UV plane model.
! The established model now contains 211 components and 3.41118 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=2.719 mas, bpa=30.56 degrees
! Estimated noise=0.161614 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00258835 Jy
! Component: 100  -  total flux cleaned = -0.00323678 Jy
! Component: 150  -  total flux cleaned = -0.00306184 Jy
! Component: 200  -  total flux cleaned = -0.00271554 Jy
! Total flux subtracted in 200 components = -0.00271554 Jy
! Clean residual min=-0.003828 max=0.003405 Jy/beam
! Clean residual mean=-0.000012 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 3.40847 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 230 components and 3.40846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.135311Jy  sigma=3.844760
! Fit after  self-cal, rms=0.135271Jy  sigma=3.843558
wmodel /J0555+3948_X_map.mod
! wmodel: Unable to open new model file: /J0555+3948_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0555+3948_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.052 x 2.719 at 30.56 degrees (North through East)
! Clean map  min=-0.0050386  max=2.5335 Jy/beam
! Writing clean map to FITS file: .//J0555+3948_X_map.fits
wmodel .//J0555+3948_X_map.mod
! Writing 230 model components to file: .//J0555+3948_X_map.mod
wobs   .//J0555+3948_X_uvs.fits
! Writing UV FITS file: .//J0555+3948_X_uvs.fits
wwins  .//J0555+3948_X_map.win
! wwins: Wrote 5 windows to .//J0555+3948_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.53348 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000828175 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0980676 0.0980676 0.196135 0.39227 0.784541 1.56908 3.13816 6.27633 12.5527 25.1053 50.2106
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.533 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3059.11 
quit
! Quitting program
! Log file .//J0555+3948_X_dfm.log closed on Wed Nov 16 11:51:03 2016