! Started logfile: .//J0530+1331_X_dfm.log on Wed Nov 16 11:50:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0530+1331_X_uvm.fits
! Reading UV FITS file: .//J0530+1331_X_uvm.fits
! AN table 1: 27 integrations on 45 of 45 possible baselines.
! AN table 2: 18 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.845947 visibilities/baseline/integration-bin.
! Found source: J0530+1331
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 12608 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0530+1331_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.217271Jy  sigma=40.404507
! Fit after  self-cal, rms=0.359276Jy  sigma=11.809545
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7093 mas, bmaj=2.007 mas, bpa=-1.846 degrees
! Estimated noise=0.298136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.498155 Jy
! Component: 100  -  total flux cleaned = 0.623489 Jy
! Total flux subtracted in 100 components = 0.623489 Jy
! Clean residual min=-0.035362 max=0.065825 Jy/beam
! Clean residual mean=0.000005 rms=0.007881 Jy/beam
! Combined flux in latest and established models = 0.623489 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.623489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.189034Jy  sigma=6.182510
! Fit after  self-cal, rms=0.188920Jy  sigma=6.179043
! Inverting map 
! Added new window around map position (1.2, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725583 Jy
! Component: 100  -  total flux cleaned = 0.119257 Jy
! Total flux subtracted in 100 components = 0.119257 Jy
! Clean residual min=-0.027411 max=0.032516 Jy/beam
! Clean residual mean=0.000006 rms=0.005328 Jy/beam
! Combined flux in latest and established models = 0.742746 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 17 components and 0.742746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.130821Jy  sigma=4.266416
! Fit after  self-cal, rms=0.128804Jy  sigma=4.189515
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0381622 Jy
! Component: 100  -  total flux cleaned = 0.0622877 Jy
! Total flux subtracted in 100 components = 0.0622877 Jy
! Clean residual min=-0.024536 max=0.022561 Jy/beam
! Clean residual mean=0.000006 rms=0.004105 Jy/beam
! Combined flux in latest and established models = 0.805033 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.805033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.103645Jy  sigma=3.379845
! Fit after  self-cal, rms=0.102745Jy  sigma=3.338800
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8665 mas, bmaj=2.219 mas, bpa=-1.196 degrees
! Estimated noise=0.192212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0453104 Jy
! Component: 100  -  total flux cleaned = 0.0760099 Jy
! Component: 150  -  total flux cleaned = 0.0983431 Jy
! Component: 200  -  total flux cleaned = 0.115035 Jy
! Total flux subtracted in 200 components = 0.115035 Jy
! Clean residual min=-0.022688 max=0.030288 Jy/beam
! Clean residual mean=-0.000002 rms=0.005421 Jy/beam
! Combined flux in latest and established models = 0.920069 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 78 components and 0.920069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073131Jy  sigma=2.412656
! Fit after  self-cal, rms=0.072238Jy  sigma=2.373353
! Inverting map 
! Added new window around map position (2.4, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0306947 Jy
! Component: 100  -  total flux cleaned = 0.0479744 Jy
! Component: 150  -  total flux cleaned = 0.060393 Jy
! Component: 200  -  total flux cleaned = 0.0697997 Jy
! Total flux subtracted in 200 components = 0.0697997 Jy
! Clean residual min=-0.018828 max=0.016642 Jy/beam
! Clean residual mean=0.000002 rms=0.003932 Jy/beam
! Combined flux in latest and established models = 0.989868 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 120 components and 0.989868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056009Jy  sigma=1.862109
! Fit after  self-cal, rms=0.053913Jy  sigma=1.785682
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8665 x 2.219 at -1.196 degrees (North through East)
! Clean map  min=-0.017199  max=0.66736 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.88     HN        1.03     KP        1.08     
!   LA        0.97     MK        1.00     NL        1.02     OV        0.99     
!   PT        0.99     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.95     HN        1.02     KP        1.04     
!   LA        0.95     MK        0.96     NL        1.03     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.88     HN        1.05     KP        1.08     
!   LA        0.97     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.95     HN        1.03     KP        1.04     
!   LA        0.96     MK        0.96     NL        1.03     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.03     KP        1.08     
!   LA        0.97     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.94     HN        1.02     KP        1.04     
!   LA        0.96     MK        0.96     NL        1.02     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.04     KP        1.08     
!   LA        0.97     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.99     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.95     HN        1.02     KP        1.04     
!   LA        0.96     MK        0.96     NL        1.02     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.88     HN        1.03     KP        1.09     
!   LA        0.98     MK        1.02     NL        1.03     OV        1.00     
!   PT        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.95     HN        1.02     KP        1.03     
!   LA        0.96     MK        0.95     NL        1.02     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.88     HN        1.03     KP        1.08     
!   LA        0.98     MK        1.02     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.96     HN        1.03     KP        1.03     
!   LA        0.95     MK        0.96     NL        1.02     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.03     KP        1.08     
!   LA        0.99     MK        1.03     NL        1.03     OV        1.00     
!   PT        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.95     HN        1.01     KP        1.04     
!   LA        0.95     MK        0.95     NL        1.03     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.03     KP        1.09     
!   LA        0.99     MK        1.03     NL        1.03     OV        1.01     
!   PT        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.96     HN        1.01     KP        1.03     
!   LA        0.96     MK        0.96     NL        1.02     PT        0.99     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.053913Jy  sigma=1.785682
! Fit after  self-cal, rms=0.029154Jy  sigma=0.924201
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8676 mas, bmaj=2.228 mas, bpa=-1.183 degrees
! Estimated noise=0.191449 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320041 Jy
! Component: 100  -  total flux cleaned = 0.00408042 Jy
! Component: 150  -  total flux cleaned = 0.0046985 Jy
! Component: 200  -  total flux cleaned = 0.00493115 Jy
! Total flux subtracted in 200 components = 0.00493115 Jy
! Clean residual min=-0.003494 max=0.004458 Jy/beam
! Clean residual mean=-0.000002 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.9948 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 136 components and 0.994799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026194Jy  sigma=0.819530
! Fit after  self-cal, rms=0.025899Jy  sigma=0.808632
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025899Jy  sigma=0.808632
! Fit after  self-cal, rms=0.025641Jy  sigma=0.802913
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8675 mas, bmaj=2.228 mas, bpa=-1.132 degrees
! Estimated noise=0.191367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106822 Jy
! Component: 100  -  total flux cleaned = 0.00141069 Jy
! Component: 150  -  total flux cleaned = 0.00161236 Jy
! Component: 200  -  total flux cleaned = 0.0016954 Jy
! Total flux subtracted in 200 components = 0.0016954 Jy
! Clean residual min=-0.002783 max=0.003010 Jy/beam
! Clean residual mean=-0.000002 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.996495 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 153 components and 0.996495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024711Jy  sigma=0.769687
! Fit after  self-cal, rms=0.024597Jy  sigma=0.765234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228456 Jy
! Component: 100  -  total flux cleaned = 0.00294432 Jy
! Component: 150  -  total flux cleaned = 0.00320931 Jy
! Component: 200  -  total flux cleaned = 0.0032711 Jy
! Total flux subtracted in 200 components = 0.0032711 Jy
! Clean residual min=-0.002489 max=0.002528 Jy/beam
! Clean residual mean=-0.000001 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.999766 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 165 components and 0.999766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024102Jy  sigma=0.747288
! Fit after  self-cal, rms=0.024064Jy  sigma=0.745703
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024064Jy  sigma=0.745703
! Fit after  self-cal, rms=0.023907Jy  sigma=0.741769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8677 mas, bmaj=2.228 mas, bpa=-1.104 degrees
! Estimated noise=0.191339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000985433 Jy
! Component: 100  -  total flux cleaned = 0.000793518 Jy
! Component: 150  -  total flux cleaned = 0.000744449 Jy
! Component: 200  -  total flux cleaned = 0.000697951 Jy
! Total flux subtracted in 200 components = 0.000697951 Jy
! Clean residual min=-0.001981 max=0.002269 Jy/beam
! Clean residual mean=-0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 1.00046 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 173 components and 1.00046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023614Jy  sigma=0.731391
! Fit after  self-cal, rms=0.023588Jy  sigma=0.730182
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.2, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223728 Jy
! Component: 100  -  total flux cleaned = 0.00370181 Jy
! Component: 150  -  total flux cleaned = 0.00476874 Jy
! Component: 200  -  total flux cleaned = 0.00543922 Jy
! Total flux subtracted in 200 components = 0.00543922 Jy
! Clean residual min=-0.001906 max=0.001847 Jy/beam
! Clean residual mean=-0.000001 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 1.0059 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 189 components and 1.0059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023307Jy  sigma=0.720316
! Fit after  self-cal, rms=0.023300Jy  sigma=0.719936
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023300Jy  sigma=0.719936
! Fit after  self-cal, rms=0.023246Jy  sigma=0.718452
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.065 mas, bpa=-1.327 degrees
! Estimated noise=0.248965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184775 Jy
! Component: 100  -  total flux cleaned = 0.00280274 Jy
! Component: 150  -  total flux cleaned = 0.00315171 Jy
! Component: 200  -  total flux cleaned = 0.00328086 Jy
! Total flux subtracted in 200 components = 0.00328086 Jy
! Clean residual min=-0.002207 max=0.002075 Jy/beam
! Clean residual mean=-0.000002 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 1.00918 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 211 components and 1.00918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023173Jy  sigma=0.715743
! Fit after  self-cal, rms=0.023165Jy  sigma=0.715283
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000531313 Jy
! Component: 100  -  total flux cleaned = 0.000586303 Jy
! Component: 150  -  total flux cleaned = 0.000736141 Jy
! Component: 200  -  total flux cleaned = 0.000849092 Jy
! Total flux subtracted in 200 components = 0.000849092 Jy
! Clean residual min=-0.002128 max=0.001871 Jy/beam
! Clean residual mean=-0.000002 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 1.01003 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 224 components and 1.01003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023139Jy  sigma=0.714468
! Fit after  self-cal, rms=0.023136Jy  sigma=0.714238
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.868 mas, bmaj=2.228 mas, bpa=-1.091 degrees
! Estimated noise=0.191392 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.868 x 2.228 at -1.091 degrees (North through East)
! Clean map  min=-0.001508  max=0.66173 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023136Jy  sigma=0.714238
! Fit after  self-cal, rms=0.021780Jy  sigma=0.664818
! Inverting map and beam 
! Estimated beam: bmin=0.8683 mas, bmaj=2.228 mas, bpa=-1.092 degrees
! Estimated noise=0.191434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032235 Jy
! Component: 100  -  total flux cleaned = -0.000559785 Jy
! Component: 150  -  total flux cleaned = -0.000556791 Jy
! Component: 200  -  total flux cleaned = -0.000557775 Jy
! Total flux subtracted in 200 components = -0.000557775 Jy
! Clean residual min=-0.001528 max=0.001592 Jy/beam
! Clean residual mean=-0.000001 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 1.00948 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 239 components and 1.00948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021659Jy  sigma=0.660547
! Fit after  self-cal, rms=0.021657Jy  sigma=0.660404
! Inverting map 
! Added new window around map position (0.2, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125561 Jy
! Component: 100  -  total flux cleaned = 0.00183888 Jy
! Component: 150  -  total flux cleaned = 0.00231598 Jy
! Component: 200  -  total flux cleaned = 0.00273375 Jy
! Total flux subtracted in 200 components = 0.00273375 Jy
! Clean residual min=-0.001372 max=0.001245 Jy/beam
! Clean residual mean=-0.000000 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 1.01221 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 253 components and 1.01221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021500Jy  sigma=0.655065
! Fit after  self-cal, rms=0.021499Jy  sigma=0.655008
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021499Jy  sigma=0.655008
! Fit after  self-cal, rms=0.021492Jy  sigma=0.654696
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7083 mas, bmaj=2.011 mas, bpa=-1.687 degrees
! Estimated noise=0.305933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.495054 Jy
! Component: 100  -  total flux cleaned = 0.630426 Jy
! Component: 150  -  total flux cleaned = 0.70933 Jy
! Component: 200  -  total flux cleaned = 0.759473 Jy
! Total flux subtracted in 200 components = 0.759473 Jy
! Clean residual min=-0.012764 max=0.026360 Jy/beam
! Clean residual mean=-0.000000 rms=0.004061 Jy/beam
! Combined flux in latest and established models = 0.759473 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.759473 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8685 mas, bmaj=2.229 mas, bpa=-1.092 degrees
! Estimated noise=0.191459 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0588205 Jy
! Component: 100  -  total flux cleaned = 0.0990871 Jy
! Component: 150  -  total flux cleaned = 0.129006 Jy
! Component: 200  -  total flux cleaned = 0.151629 Jy
! Total flux subtracted in 200 components = 0.151629 Jy
! Clean residual min=-0.007671 max=0.013123 Jy/beam
! Clean residual mean=-0.000005 rms=0.003215 Jy/beam
! Combined flux in latest and established models = 0.911102 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 61 components and 0.911102 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.065 mas, bpa=-1.33 degrees
! Estimated noise=0.248897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0330647 Jy
! Component: 100  -  total flux cleaned = 0.052147 Jy
! Component: 150  -  total flux cleaned = 0.0643146 Jy
! Component: 200  -  total flux cleaned = 0.0725111 Jy
! Total flux subtracted in 200 components = 0.0725111 Jy
! Clean residual min=-0.004257 max=0.004789 Jy/beam
! Clean residual mean=-0.000003 rms=0.001494 Jy/beam
! Combined flux in latest and established models = 0.983613 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0057372 Jy
! Component: 100  -  total flux cleaned = 0.00986416 Jy
! Component: 150  -  total flux cleaned = 0.0129451 Jy
! Component: 200  -  total flux cleaned = 0.0154244 Jy
! Total flux subtracted in 200 components = 0.0154244 Jy
! Clean residual min=-0.002447 max=0.002191 Jy/beam
! Clean residual mean=-0.000001 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.999038 Jy
! Adding 115 model components to the UV plane model.
! The established model now contains 162 components and 0.999038 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8685 mas, bmaj=2.229 mas, bpa=-1.092 degrees
! Estimated noise=0.191459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179048 Jy
! Component: 100  -  total flux cleaned = 0.00297953 Jy
! Component: 150  -  total flux cleaned = 0.00401784 Jy
! Component: 200  -  total flux cleaned = 0.00466754 Jy
! Total flux subtracted in 200 components = 0.00466754 Jy
! Clean residual min=-0.002486 max=0.002686 Jy/beam
! Clean residual mean=-0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 1.00371 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 189 components and 1.00371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022309Jy  sigma=0.682181
! Fit after  self-cal, rms=0.022200Jy  sigma=0.677867
wmodel /J0530+1331_X_map.mod
! wmodel: Unable to open new model file: /J0530+1331_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0530+1331_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8685 x 2.229 at -1.092 degrees (North through East)
! Clean map  min=-0.0021333  max=0.65954 Jy/beam
! Writing clean map to FITS file: .//J0530+1331_X_map.fits
wmodel .//J0530+1331_X_map.mod
! Writing 189 model components to file: .//J0530+1331_X_map.mod
wobs   .//J0530+1331_X_uvs.fits
! Writing UV FITS file: .//J0530+1331_X_uvs.fits
wwins  .//J0530+1331_X_map.win
! wwins: Wrote 6 windows to .//J0530+1331_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.659536 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000411269 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.187072 0.187072 0.374144 0.748287 1.49657 2.99315 5.9863 11.9726 23.9452 47.8904 95.7807
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.659 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1603.66 
quit
! Quitting program
! Log file .//J0530+1331_X_dfm.log closed on Wed Nov 16 11:50:30 2016