! Started logfile: .//J0518+3306_X_dfm.log on Wed Nov 16 11:50:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0518+3306_X_uva.fits
! Reading UV FITS file: .//J0518+3306_X_uva.fits
! AN table 1: 89 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.820474 visibilities/baseline/integration-bin.
! Found source: J0518+3306
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 3 lines of history.
! 
! Reading 26288 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0518+3306_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019067Jy  sigma=27.244170
! Fit after  self-cal, rms=0.806976Jy  sigma=21.510467
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.786 mas, bmaj=2.036 mas, bpa=19.7 degrees
! Estimated noise=0.292476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136803 Jy
! Component: 100  -  total flux cleaned = 0.186846 Jy
! Total flux subtracted in 100 components = 0.186846 Jy
! Clean residual min=-0.008102 max=0.023289 Jy/beam
! Clean residual mean=-0.000014 rms=0.001736 Jy/beam
! Combined flux in latest and established models = 0.186846 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.186846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059144Jy  sigma=1.494968
! Fit after  self-cal, rms=0.058359Jy  sigma=1.478703
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275842 Jy
! Component: 100  -  total flux cleaned = 0.0419281 Jy
! Total flux subtracted in 100 components = 0.0419281 Jy
! Clean residual min=-0.003601 max=0.007810 Jy/beam
! Clean residual mean=-0.000007 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.228774 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.228774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040047Jy  sigma=0.962518
! Fit after  self-cal, rms=0.039712Jy  sigma=0.955583
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00899463 Jy
! Component: 100  -  total flux cleaned = 0.0142963 Jy
! Total flux subtracted in 100 components = 0.0142963 Jy
! Clean residual min=-0.002835 max=0.004549 Jy/beam
! Clean residual mean=-0.000005 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.243071 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.243071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037062Jy  sigma=0.889604
! Fit after  self-cal, rms=0.037013Jy  sigma=0.888714
! Inverting map 
! Added new window around map position (-0.6, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450995 Jy
! Component: 100  -  total flux cleaned = 0.00661917 Jy
! Total flux subtracted in 100 components = 0.00661917 Jy
! Clean residual min=-0.002723 max=0.002927 Jy/beam
! Clean residual mean=-0.000004 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.24969 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.24969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036403Jy  sigma=0.877406
! Fit after  self-cal, rms=0.036390Jy  sigma=0.877083
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.025 mas, bmaj=2.441 mas, bpa=18.95 degrees
! Estimated noise=0.16593 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100774 Jy
! Component: 100  -  total flux cleaned = 0.00117721 Jy
! Component: 150  -  total flux cleaned = 0.00117489 Jy
! Component: 200  -  total flux cleaned = 0.0011738 Jy
! Total flux subtracted in 200 components = 0.0011738 Jy
! Clean residual min=-0.003486 max=0.003880 Jy/beam
! Clean residual mean=-0.000011 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.250864 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.250864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036194Jy  sigma=0.873383
! Fit after  self-cal, rms=0.036179Jy  sigma=0.873033
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.025 x 2.441 at 18.95 degrees (North through East)
! Clean map  min=-0.003321  max=0.1902 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.01     HN        0.94     KP        1.02     
!   LA        1.02     MK        1.07     NL        0.92     OV        0.98     
!   PT        0.93     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.90     KP        1.04     
!   LA        0.95     MK        1.04     NL        0.99     OV        0.95     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        0.92     KP        1.09     
!   LA        0.93     MK        1.10     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.02     HN        0.97     KP        0.96     
!   LA        0.99     MK        1.07     NL        0.94     OV        1.00     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.98     KP        1.14     
!   LA        0.98     MK        1.06     NL        1.06     OV        0.92     
!   PT        0.90     SC        0.94     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.11     HN        1.03     KP        1.18     
!   LA        1.02     MK        1.09     NL        1.04     OV        1.02     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.10     HN        0.98     KP        1.18     
!   LA        0.98     MK        1.04     NL        0.90     OV        1.05     
!   PT        0.87     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        0.98     KP        1.14     
!   LA        0.94     MK        1.05     NL        0.88     OV        0.96     
!   PT        0.88     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.036179Jy  sigma=0.873033
! Fit after  self-cal, rms=0.030111Jy  sigma=0.692701
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.437 mas, bpa=19.23 degrees
! Estimated noise=0.165746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00170102 Jy
! Component: 100  -  total flux cleaned = -0.00194706 Jy
! Component: 150  -  total flux cleaned = -0.00206285 Jy
! Component: 200  -  total flux cleaned = -0.00211283 Jy
! Total flux subtracted in 200 components = -0.00211283 Jy
! Clean residual min=-0.001100 max=0.001890 Jy/beam
! Clean residual mean=-0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.248751 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 0.248751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029997Jy  sigma=0.689426
! Fit after  self-cal, rms=0.029982Jy  sigma=0.688884
! Inverting map 
! Added new window around map position (1.4, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151792 Jy
! Component: 100  -  total flux cleaned = 0.00168988 Jy
! Component: 150  -  total flux cleaned = 0.00165602 Jy
! Component: 200  -  total flux cleaned = 0.00168341 Jy
! Total flux subtracted in 200 components = 0.00168341 Jy
! Clean residual min=-0.000958 max=0.001030 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.250434 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 63 components and 0.250434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029855Jy  sigma=0.685295
! Fit after  self-cal, rms=0.029846Jy  sigma=0.685040
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029846Jy  sigma=0.685040
! Fit after  self-cal, rms=0.029693Jy  sigma=0.680665
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.436 mas, bpa=19.14 degrees
! Estimated noise=0.165671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000568902 Jy
! Component: 100  -  total flux cleaned = -0.00049777 Jy
! Component: 150  -  total flux cleaned = -0.000370989 Jy
! Component: 200  -  total flux cleaned = -0.000296053 Jy
! Total flux subtracted in 200 components = -0.000296053 Jy
! Clean residual min=-0.000789 max=0.000752 Jy/beam
! Clean residual mean=-0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.250138 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 0.250138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029653Jy  sigma=0.679553
! Fit after  self-cal, rms=0.029652Jy  sigma=0.679489
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.44525e-05 Jy
! Component: 100  -  total flux cleaned = 0.000148342 Jy
! Component: 150  -  total flux cleaned = 0.000178444 Jy
! Component: 200  -  total flux cleaned = 0.000164867 Jy
! Total flux subtracted in 200 components = 0.000164867 Jy
! Clean residual min=-0.000770 max=0.000751 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.250303 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.250303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029633Jy  sigma=0.679055
! Fit after  self-cal, rms=0.029632Jy  sigma=0.679018
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029632Jy  sigma=0.679018
! Fit after  self-cal, rms=0.029539Jy  sigma=0.674652
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=2.435 mas, bpa=19.04 degrees
! Estimated noise=0.16554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000247336 Jy
! Component: 100  -  total flux cleaned = -0.000310845 Jy
! Component: 150  -  total flux cleaned = -0.000297385 Jy
! Component: 200  -  total flux cleaned = -0.000297278 Jy
! Total flux subtracted in 200 components = -0.000297278 Jy
! Clean residual min=-0.000671 max=0.000598 Jy/beam
! Clean residual mean=0.000001 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.250006 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.250006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029522Jy  sigma=0.674234
! Fit after  self-cal, rms=0.029522Jy  sigma=0.674212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.36856e-06 Jy
! Component: 100  -  total flux cleaned = 4.21372e-05 Jy
! Component: 150  -  total flux cleaned = 5.18722e-05 Jy
! Component: 200  -  total flux cleaned = 5.22278e-05 Jy
! Total flux subtracted in 200 components = 5.22278e-05 Jy
! Clean residual min=-0.000653 max=0.000579 Jy/beam
! Clean residual mean=0.000001 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.250058 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.250058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029513Jy  sigma=0.674032
! Fit after  self-cal, rms=0.029513Jy  sigma=0.674022
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029513Jy  sigma=0.674022
! Fit after  self-cal, rms=0.029497Jy  sigma=0.673842
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=3.175 mas, bpa=13.58 degrees
! Estimated noise=0.199275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.02078e-05 Jy
! Component: 100  -  total flux cleaned = -1.33058e-05 Jy
! Component: 150  -  total flux cleaned = 1.02713e-06 Jy
! Component: 200  -  total flux cleaned = -1.06299e-05 Jy
! Total flux subtracted in 200 components = -1.06299e-05 Jy
! Clean residual min=-0.000671 max=0.000551 Jy/beam
! Clean residual mean=0.000001 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.250047 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 113 components and 0.250047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029493Jy  sigma=0.673720
! Fit after  self-cal, rms=0.029493Jy  sigma=0.673706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.00566e-05 Jy
! Component: 100  -  total flux cleaned = -9.5974e-06 Jy
! Component: 150  -  total flux cleaned = -1.47051e-05 Jy
! Component: 200  -  total flux cleaned = -2.82588e-05 Jy
! Total flux subtracted in 200 components = -2.82588e-05 Jy
! Clean residual min=-0.000669 max=0.000551 Jy/beam
! Clean residual mean=0.000001 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.250019 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 0.250019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029490Jy  sigma=0.673653
! Fit after  self-cal, rms=0.029490Jy  sigma=0.673646
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=2.435 mas, bpa=19.04 degrees
! Estimated noise=0.165495 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.026 x 2.435 at 19.04 degrees (North through East)
! Clean map  min=-0.0010704  max=0.1902 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7889 mas, bmaj=2.034 mas, bpa=19.78 degrees
! Estimated noise=0.290364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136181 Jy
! Component: 100  -  total flux cleaned = 0.18792 Jy
! Component: 150  -  total flux cleaned = 0.214696 Jy
! Component: 200  -  total flux cleaned = 0.228598 Jy
! Total flux subtracted in 200 components = 0.228598 Jy
! Clean residual min=-0.002107 max=0.006474 Jy/beam
! Clean residual mean=-0.000003 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.228598 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.228598 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=2.435 mas, bpa=19.04 degrees
! Estimated noise=0.165495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100557 Jy
! Component: 100  -  total flux cleaned = 0.0148326 Jy
! Component: 150  -  total flux cleaned = 0.0176349 Jy
! Component: 200  -  total flux cleaned = 0.0194211 Jy
! Total flux subtracted in 200 components = 0.0194211 Jy
! Clean residual min=-0.000816 max=0.000980 Jy/beam
! Clean residual mean=-0.000001 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.248019 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 38 components and 0.248019 Jy
! Inverting map 
! Added new window around map position (-4, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101056 Jy
! Component: 100  -  total flux cleaned = 0.00161633 Jy
! Component: 150  -  total flux cleaned = 0.00186808 Jy
! Component: 200  -  total flux cleaned = 0.00197697 Jy
! Total flux subtracted in 200 components = 0.00197697 Jy
! Clean residual min=-0.000628 max=0.000661 Jy/beam
! Clean residual mean=0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.249996 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 52 components and 0.249996 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=3.175 mas, bpa=13.58 degrees
! Estimated noise=0.199275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394977 Jy
! Component: 100  -  total flux cleaned = 0.000411811 Jy
! Component: 150  -  total flux cleaned = 0.000367177 Jy
! Component: 200  -  total flux cleaned = 0.000328075 Jy
! Total flux subtracted in 200 components = 0.000328075 Jy
! Clean residual min=-0.000668 max=0.000553 Jy/beam
! Clean residual mean=0.000001 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.250324 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.19266e-05 Jy
! Component: 100  -  total flux cleaned = -2.31361e-05 Jy
! Component: 150  -  total flux cleaned = -4.34635e-05 Jy
! Component: 200  -  total flux cleaned = -5.28175e-05 Jy
! Total flux subtracted in 200 components = -5.28175e-05 Jy
! Clean residual min=-0.000647 max=0.000550 Jy/beam
! Clean residual mean=0.000001 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.250271 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 77 components and 0.250271 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=2.435 mas, bpa=19.04 degrees
! Estimated noise=0.165495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.20361e-05 Jy
! Component: 100  -  total flux cleaned = 1.30167e-05 Jy
! Component: 150  -  total flux cleaned = -3.45918e-06 Jy
! Component: 200  -  total flux cleaned = -3.37705e-05 Jy
! Total flux subtracted in 200 components = -3.37705e-05 Jy
! Clean residual min=-0.000622 max=0.000567 Jy/beam
! Clean residual mean=0.000001 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.250237 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 87 components and 0.250237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029512Jy  sigma=0.674112
! Fit after  self-cal, rms=0.029507Jy  sigma=0.673948
wmodel /J0518+3306_X_map.mod
! wmodel: Unable to open new model file: /J0518+3306_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0518+3306_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.026 x 2.435 at 19.04 degrees (North through East)
! Clean map  min=-0.00081514  max=0.19032 Jy/beam
! Writing clean map to FITS file: .//J0518+3306_X_map.fits
wmodel .//J0518+3306_X_map.mod
! Writing 87 model components to file: .//J0518+3306_X_map.mod
wobs   .//J0518+3306_X_uvs.fits
! Writing UV FITS file: .//J0518+3306_X_uvs.fits
wwins  .//J0518+3306_X_map.win
! wwins: Wrote 4 windows to .//J0518+3306_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.190325 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000143314 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.2259 0.2259 0.4518 0.903599 1.8072 3.6144 7.22879 14.4576 28.9152 57.8304
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.19 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1328.02 
quit
! Quitting program
! Log file .//J0518+3306_X_dfm.log closed on Wed Nov 16 11:50:26 2016