! Started logfile: .//J0501+7128_X_dfm.log on Wed Nov 16 11:49:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0501+7128_X_uvm.fits
! Reading UV FITS file: .//J0501+7128_X_uvm.fits
! AN table 1: 39 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.937322 visibilities/baseline/integration-bin.
! Found source: J0501+7128
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 13160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0501+7128_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015644Jy  sigma=29.759930
! Fit after  self-cal, rms=0.827551Jy  sigma=24.288464
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8118 mas, bmaj=1.095 mas, bpa=-5.56 degrees
! Estimated noise=0.363941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132292 Jy
! Component: 100  -  total flux cleaned = 0.163177 Jy
! Total flux subtracted in 100 components = 0.163177 Jy
! Clean residual min=-0.004167 max=0.011167 Jy/beam
! Clean residual mean=0.000014 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.163177 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.163177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038411Jy  sigma=0.923042
! Fit after  self-cal, rms=0.038395Jy  sigma=0.922493
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110199 Jy
! Component: 100  -  total flux cleaned = 0.0157204 Jy
! Total flux subtracted in 100 components = 0.0157204 Jy
! Clean residual min=-0.002867 max=0.003116 Jy/beam
! Clean residual mean=0.000004 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.178898 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.178898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035165Jy  sigma=0.818492
! Fit after  self-cal, rms=0.035153Jy  sigma=0.817997
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.433 mas, bpa=-5.927 degrees
! Estimated noise=0.218272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250381 Jy
! Component: 100  -  total flux cleaned = 0.00337712 Jy
! Component: 150  -  total flux cleaned = 0.00349646 Jy
! Component: 200  -  total flux cleaned = 0.00353908 Jy
! Total flux subtracted in 200 components = 0.00353908 Jy
! Clean residual min=-0.003174 max=0.003335 Jy/beam
! Clean residual mean=0.000003 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.182437 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 13 components and 0.182437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034977Jy  sigma=0.813135
! Fit after  self-cal, rms=0.034971Jy  sigma=0.812861
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.097 x 1.433 at -5.927 degrees (North through East)
! Clean map  min=-0.0030899  max=0.17006 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.01     KP        1.06     
!   LA        0.94     MK        0.99     NL        1.06     OV        1.00     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.03     KP        1.06     
!   LA        0.95     MK        0.99     NL        1.07     OV        0.98     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.02     KP        1.07     
!   LA        0.94     MK        1.00     NL        1.07     OV        1.00     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.02     KP        1.08     
!   LA        0.94     MK        0.99     NL        1.06     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.02     KP        1.07     
!   LA        0.95     MK        1.00     NL        1.07     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.02     KP        1.08     
!   LA        0.94     MK        1.00     NL        1.08     OV        1.00     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.02     KP        1.07     
!   LA        0.95     MK        1.00     NL        1.07     OV        1.01     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.04     KP        1.07     
!   LA        0.96     MK        1.00     NL        1.07     OV        0.99     
!   PT        0.95     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.034971Jy  sigma=0.812861
! Fit after  self-cal, rms=0.032717Jy  sigma=0.749873
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.432 mas, bpa=-5.644 degrees
! Estimated noise=0.217856 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000663285 Jy
! Component: 100  -  total flux cleaned = -0.000880483 Jy
! Component: 150  -  total flux cleaned = -0.00091658 Jy
! Component: 200  -  total flux cleaned = -0.000959857 Jy
! Total flux subtracted in 200 components = -0.000959857 Jy
! Clean residual min=-0.001556 max=0.001725 Jy/beam
! Clean residual mean=-0.000010 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.181477 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 17 components and 0.181477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032698Jy  sigma=0.749402
! Fit after  self-cal, rms=0.032686Jy  sigma=0.749300
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032686Jy  sigma=0.749300
! Fit after  self-cal, rms=0.032430Jy  sigma=0.735830
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.432 mas, bpa=-5.444 degrees
! Estimated noise=0.21758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00049833 Jy
! Component: 100  -  total flux cleaned = -0.000500447 Jy
! Component: 150  -  total flux cleaned = -0.000501276 Jy
! Component: 200  -  total flux cleaned = -0.000518367 Jy
! Total flux subtracted in 200 components = -0.000518367 Jy
! Clean residual min=-0.000931 max=0.001384 Jy/beam
! Clean residual mean=0.000008 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.180958 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 19 components and 0.180958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032420Jy  sigma=0.735558
! Fit after  self-cal, rms=0.032418Jy  sigma=0.735499
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013361 Jy
! Component: 100  -  total flux cleaned = 0.00203739 Jy
! Component: 150  -  total flux cleaned = 0.00238549 Jy
! Component: 200  -  total flux cleaned = 0.002551 Jy
! Total flux subtracted in 200 components = 0.002551 Jy
! Clean residual min=-0.000868 max=0.000928 Jy/beam
! Clean residual mean=0.000003 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.183509 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 35 components and 0.183509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032358Jy  sigma=0.733447
! Fit after  self-cal, rms=0.032356Jy  sigma=0.733340
! Inverting map 
! Added new window around map position (31.2, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000660202 Jy
! Component: 100  -  total flux cleaned = 0.000860716 Jy
! Component: 150  -  total flux cleaned = 0.000920449 Jy
! Component: 200  -  total flux cleaned = 0.000986662 Jy
! Total flux subtracted in 200 components = 0.000986662 Jy
! Clean residual min=-0.000837 max=0.000783 Jy/beam
! Clean residual mean=0.000003 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.184496 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 48 components and 0.184496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032328Jy  sigma=0.732604
! Fit after  self-cal, rms=0.032327Jy  sigma=0.732579
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032327Jy  sigma=0.732579
! Fit after  self-cal, rms=0.032296Jy  sigma=0.732412
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.433 mas, bpa=-5.639 degrees
! Estimated noise=0.217367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.24802e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139915 Jy
! Component: 150  -  total flux cleaned = 0.00020027 Jy
! Component: 200  -  total flux cleaned = 0.000222196 Jy
! Total flux subtracted in 200 components = 0.000222196 Jy
! Clean residual min=-0.000829 max=0.000785 Jy/beam
! Clean residual mean=0.000002 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.184718 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 55 components and 0.184718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032283Jy  sigma=0.732143
! Fit after  self-cal, rms=0.032283Jy  sigma=0.732132
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.43061e-05 Jy
! Component: 100  -  total flux cleaned = 6.46568e-05 Jy
! Component: 150  -  total flux cleaned = 7.42002e-05 Jy
! Component: 200  -  total flux cleaned = 9.22246e-05 Jy
! Total flux subtracted in 200 components = 9.22246e-05 Jy
! Clean residual min=-0.000831 max=0.000776 Jy/beam
! Clean residual mean=0.000002 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.184811 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 59 components and 0.184811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032276Jy  sigma=0.731981
! Fit after  self-cal, rms=0.032276Jy  sigma=0.731974
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032276Jy  sigma=0.731974
! Fit after  self-cal, rms=0.032249Jy  sigma=0.731936
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.34 mas, bmaj=2.597 mas, bpa=-2.312 degrees
! Estimated noise=0.273003 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.66896e-05 Jy
! Component: 100  -  total flux cleaned = 5.48473e-05 Jy
! Component: 150  -  total flux cleaned = 9.02025e-05 Jy
! Component: 200  -  total flux cleaned = 9.54032e-05 Jy
! Total flux subtracted in 200 components = 9.54032e-05 Jy
! Clean residual min=-0.000908 max=0.000813 Jy/beam
! Clean residual mean=0.000004 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.184906 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.184906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032246Jy  sigma=0.731890
! Fit after  self-cal, rms=0.032246Jy  sigma=0.731875
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.57249e-05 Jy
! Component: 100  -  total flux cleaned = 4.04713e-05 Jy
! Component: 150  -  total flux cleaned = 3.66934e-05 Jy
! Component: 200  -  total flux cleaned = 3.67019e-05 Jy
! Total flux subtracted in 200 components = 3.67019e-05 Jy
! Clean residual min=-0.000915 max=0.000802 Jy/beam
! Clean residual mean=0.000004 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.184943 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.184943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032244Jy  sigma=0.731865
! Fit after  self-cal, rms=0.032244Jy  sigma=0.731862
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.433 mas, bpa=-5.766 degrees
! Estimated noise=0.217204 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.097 x 1.433 at -5.766 degrees (North through East)
! Clean map  min=-0.00080865  max=0.16954 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8117 mas, bmaj=1.096 mas, bpa=-5.114 degrees
! Estimated noise=0.360714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131018 Jy
! Component: 100  -  total flux cleaned = 0.161917 Jy
! Component: 150  -  total flux cleaned = 0.172875 Jy
! Component: 200  -  total flux cleaned = 0.177417 Jy
! Total flux subtracted in 200 components = 0.177417 Jy
! Clean residual min=-0.001393 max=0.001954 Jy/beam
! Clean residual mean=0.000005 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.177417 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.177417 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.433 mas, bpa=-5.766 degrees
! Estimated noise=0.217204 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250557 Jy
! Component: 100  -  total flux cleaned = 0.00390793 Jy
! Component: 150  -  total flux cleaned = 0.00493633 Jy
! Component: 200  -  total flux cleaned = 0.00571992 Jy
! Total flux subtracted in 200 components = 0.00571992 Jy
! Clean residual min=-0.000826 max=0.000826 Jy/beam
! Clean residual mean=0.000005 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.183137 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 28 components and 0.183137 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.34 mas, bmaj=2.597 mas, bpa=-2.312 degrees
! Estimated noise=0.273003 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000782406 Jy
! Component: 100  -  total flux cleaned = 0.00120127 Jy
! Component: 150  -  total flux cleaned = 0.00142792 Jy
! Component: 200  -  total flux cleaned = 0.00159668 Jy
! Total flux subtracted in 200 components = 0.00159668 Jy
! Clean residual min=-0.000899 max=0.000811 Jy/beam
! Clean residual mean=0.000005 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.184733 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.07824e-05 Jy
! Component: 100  -  total flux cleaned = 0.000124276 Jy
! Component: 150  -  total flux cleaned = 0.000148115 Jy
! Component: 200  -  total flux cleaned = 0.000169512 Jy
! Total flux subtracted in 200 components = 0.000169512 Jy
! Clean residual min=-0.000909 max=0.000798 Jy/beam
! Clean residual mean=0.000004 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.184903 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 71 components and 0.184903 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.433 mas, bpa=-5.766 degrees
! Estimated noise=0.217204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113931 Jy
! Component: 100  -  total flux cleaned = -0.000156513 Jy
! Component: 150  -  total flux cleaned = -0.000182835 Jy
! Component: 200  -  total flux cleaned = -0.000171108 Jy
! Total flux subtracted in 200 components = -0.000171108 Jy
! Clean residual min=-0.000882 max=0.000782 Jy/beam
! Clean residual mean=0.000002 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.184732 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.184732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032253Jy  sigma=0.732232
! Fit after  self-cal, rms=0.032252Jy  sigma=0.732213
wmodel /J0501+7128_X_map.mod
! wmodel: Unable to open new model file: /J0501+7128_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0501+7128_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.097 x 1.433 at -5.766 degrees (North through East)
! Clean map  min=-0.00084304  max=0.1693 Jy/beam
! Writing clean map to FITS file: .//J0501+7128_X_map.fits
wmodel .//J0501+7128_X_map.mod
! Writing 86 model components to file: .//J0501+7128_X_map.mod
wobs   .//J0501+7128_X_uvs.fits
! Writing UV FITS file: .//J0501+7128_X_uvs.fits
wwins  .//J0501+7128_X_map.win
! wwins: Wrote 3 windows to .//J0501+7128_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.169295 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00018535 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.328449 0.328449 0.656898 1.3138 2.62759 5.25519 10.5104 21.0207 42.0415 84.083
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.169 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  913.383 
quit
! Quitting program
! Log file .//J0501+7128_X_dfm.log closed on Wed Nov 16 11:50:01 2016