! Started logfile: .//J0453-2807_X_dfm.log on Wed Nov 16 11:49:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0453-2807_X_uva.fits
! Reading UV FITS file: .//J0453-2807_X_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.85 visibilities/baseline/integration-bin.
! Found source: J0453-2807
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 7344 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0453-2807_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.538478Jy  sigma=38.187610
! Fit after  self-cal, rms=0.365876Jy  sigma=8.880082
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7067 mas, bmaj=1.98 mas, bpa=1.736 degrees
! Estimated noise=0.612056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.835649 Jy
! Component: 100  -  total flux cleaned = 1.0443 Jy
! Total flux subtracted in 100 components = 1.0443 Jy
! Clean residual min=-0.073932 max=0.149500 Jy/beam
! Clean residual mean=0.000137 rms=0.022082 Jy/beam
! Combined flux in latest and established models = 1.0443 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.0443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.341242Jy  sigma=8.383819
! Fit after  self-cal, rms=0.341297Jy  sigma=8.378476
! Inverting map 
! Added new window around map position (-1.2, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140787 Jy
! Component: 100  -  total flux cleaned = 0.226722 Jy
! Total flux subtracted in 100 components = 0.226722 Jy
! Clean residual min=-0.064473 max=0.101555 Jy/beam
! Clean residual mean=0.000082 rms=0.015700 Jy/beam
! Combined flux in latest and established models = 1.27102 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 1.27102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.267242Jy  sigma=5.974999
! Fit after  self-cal, rms=0.259318Jy  sigma=5.804007
! Inverting map 
! Added new window around map position (1.6, 7.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0953803 Jy
! Component: 100  -  total flux cleaned = 0.157313 Jy
! Total flux subtracted in 100 components = 0.157313 Jy
! Clean residual min=-0.058898 max=0.056406 Jy/beam
! Clean residual mean=0.000055 rms=0.011665 Jy/beam
! Combined flux in latest and established models = 1.42833 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 1.42833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.215194Jy  sigma=4.314696
! Fit after  self-cal, rms=0.212790Jy  sigma=4.267945
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8642 mas, bmaj=2.383 mas, bpa=0.8489 degrees
! Estimated noise=0.371571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0741319 Jy
! Component: 100  -  total flux cleaned = 0.125838 Jy
! Component: 150  -  total flux cleaned = 0.163948 Jy
! Component: 200  -  total flux cleaned = 0.192525 Jy
! Total flux subtracted in 200 components = 0.192525 Jy
! Clean residual min=-0.048240 max=0.043799 Jy/beam
! Clean residual mean=0.000016 rms=0.010505 Jy/beam
! Combined flux in latest and established models = 1.62086 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 66 components and 1.62086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.191282Jy  sigma=3.033082
! Fit after  self-cal, rms=0.190686Jy  sigma=3.006668
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8642 x 2.383 at 0.8489 degrees (North through East)
! Clean map  min=-0.044161  max=0.99565 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.190686Jy  sigma=3.006668
! Fit after  self-cal, rms=0.190849Jy  sigma=3.010490
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.868 mas, bmaj=2.382 mas, bpa=0.8446 degrees
! Estimated noise=0.371784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245683 Jy
! Component: 100  -  total flux cleaned = 0.0415477 Jy
! Component: 150  -  total flux cleaned = 0.0523451 Jy
! Component: 200  -  total flux cleaned = 0.0553974 Jy
! Total flux subtracted in 200 components = 0.0553974 Jy
! Clean residual min=-0.043634 max=0.042368 Jy/beam
! Clean residual mean=0.000007 rms=0.009542 Jy/beam
! Combined flux in latest and established models = 1.67625 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 1.67625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.188849Jy  sigma=2.837339
! Fit after  self-cal, rms=0.188654Jy  sigma=2.828400
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.188654Jy  sigma=2.828400
! Fit after  self-cal, rms=0.188654Jy  sigma=2.828400
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.868 mas, bmaj=2.382 mas, bpa=0.8446 degrees
! Estimated noise=0.371784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409808 Jy
! Component: 100  -  total flux cleaned = 0.00497019 Jy
! Component: 150  -  total flux cleaned = 0.00576974 Jy
! Component: 200  -  total flux cleaned = 0.00690596 Jy
! Total flux subtracted in 200 components = 0.00690596 Jy
! Clean residual min=-0.041315 max=0.041735 Jy/beam
! Clean residual mean=0.000006 rms=0.009339 Jy/beam
! Combined flux in latest and established models = 1.68316 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 74 components and 1.68316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.186828Jy  sigma=2.775168
! Fit after  self-cal, rms=0.186636Jy  sigma=2.770901
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0372744 Jy
! Component: 100  -  total flux cleaned = 0.0538417 Jy
! Component: 150  -  total flux cleaned = 0.0538404 Jy
! Component: 200  -  total flux cleaned = 0.0542729 Jy
! Total flux subtracted in 200 components = 0.0542729 Jy
! Clean residual min=-0.036200 max=0.037171 Jy/beam
! Clean residual mean=0.000006 rms=0.008390 Jy/beam
! Combined flux in latest and established models = 1.73743 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 92 components and 1.73743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.176126Jy  sigma=2.550383
! Fit after  self-cal, rms=0.175517Jy  sigma=2.524123
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.175517Jy  sigma=2.524123
! Fit after  self-cal, rms=0.175517Jy  sigma=2.524123
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.868 mas, bmaj=2.382 mas, bpa=0.8446 degrees
! Estimated noise=0.371784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00858458 Jy
! Component: 100  -  total flux cleaned = 0.0106106 Jy
! Component: 150  -  total flux cleaned = 0.0121413 Jy
! Component: 200  -  total flux cleaned = 0.0132288 Jy
! Total flux subtracted in 200 components = 0.0132288 Jy
! Clean residual min=-0.034042 max=0.035203 Jy/beam
! Clean residual mean=0.000006 rms=0.008153 Jy/beam
! Combined flux in latest and established models = 1.75066 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 94 components and 1.75066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.172359Jy  sigma=2.487434
! Fit after  self-cal, rms=0.172276Jy  sigma=2.483109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334659 Jy
! Component: 100  -  total flux cleaned = 0.00439523 Jy
! Component: 150  -  total flux cleaned = 0.00505552 Jy
! Component: 200  -  total flux cleaned = 0.00538039 Jy
! Total flux subtracted in 200 components = 0.00538039 Jy
! Clean residual min=-0.032651 max=0.034642 Jy/beam
! Clean residual mean=0.000006 rms=0.008051 Jy/beam
! Combined flux in latest and established models = 1.75604 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 1.75604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.170280Jy  sigma=2.454642
! Fit after  self-cal, rms=0.170222Jy  sigma=2.452742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.170222Jy  sigma=2.452742
! Fit after  self-cal, rms=0.170222Jy  sigma=2.452742
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.243 mas, bmaj=5.955 mas, bpa=8.439 degrees
! Estimated noise=0.46512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000862533 Jy
! Component: 100  -  total flux cleaned = 0.000353713 Jy
! Component: 150  -  total flux cleaned = 0.00101934 Jy
! Component: 200  -  total flux cleaned = 0.00162819 Jy
! Total flux subtracted in 200 components = 0.00162819 Jy
! Clean residual min=-0.035697 max=0.048452 Jy/beam
! Clean residual mean=-0.000017 rms=0.012559 Jy/beam
! Combined flux in latest and established models = 1.75767 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 107 components and 1.75767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.168850Jy  sigma=2.472035
! Fit after  self-cal, rms=0.168708Jy  sigma=2.470344
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000374339 Jy
! Component: 100  -  total flux cleaned = 0.000376778 Jy
! Component: 150  -  total flux cleaned = 0.000380291 Jy
! Component: 200  -  total flux cleaned = 0.000376458 Jy
! Total flux subtracted in 200 components = 0.000376458 Jy
! Clean residual min=-0.035312 max=0.048078 Jy/beam
! Clean residual mean=-0.000018 rms=0.012462 Jy/beam
! Combined flux in latest and established models = 1.75805 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 114 components and 1.75805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.167923Jy  sigma=2.488772
! Fit after  self-cal, rms=0.167873Jy  sigma=2.488151
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.868 mas, bmaj=2.382 mas, bpa=0.8446 degrees
! Estimated noise=0.371784 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.868 x 2.382 at 0.8446 degrees (North through East)
! Clean map  min=-0.028453  max=0.97466 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.167873Jy  sigma=2.488151
! Fit after  self-cal, rms=0.166569Jy  sigma=2.445248
! Inverting map and beam 
! Estimated beam: bmin=0.8683 mas, bmaj=2.382 mas, bpa=0.8293 degrees
! Estimated noise=0.372041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00226837 Jy
! Component: 100  -  total flux cleaned = -0.00257771 Jy
! Component: 150  -  total flux cleaned = -0.00227448 Jy
! Component: 200  -  total flux cleaned = -0.00199965 Jy
! Total flux subtracted in 200 components = -0.00199965 Jy
! Clean residual min=-0.028537 max=0.032835 Jy/beam
! Clean residual mean=0.000002 rms=0.007556 Jy/beam
! Combined flux in latest and established models = 1.75605 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 127 components and 1.75605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.164922Jy  sigma=2.411895
! Fit after  self-cal, rms=0.164860Jy  sigma=2.411066
! Inverting map 
! Added new window around map position (-13.4, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.030315 Jy
! Component: 100  -  total flux cleaned = 0.0428778 Jy
! Component: 150  -  total flux cleaned = 0.0491517 Jy
! Component: 200  -  total flux cleaned = 0.0545939 Jy
! Total flux subtracted in 200 components = 0.0545939 Jy
! Clean residual min=-0.025104 max=0.026099 Jy/beam
! Clean residual mean=0.000008 rms=0.006574 Jy/beam
! Combined flux in latest and established models = 1.81064 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 164 components and 1.81064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.159352Jy  sigma=2.191228
! Fit after  self-cal, rms=0.158920Jy  sigma=2.177039
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.158920Jy  sigma=2.177039
! Fit after  self-cal, rms=0.158299Jy  sigma=2.157031
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7072 mas, bmaj=1.98 mas, bpa=1.741 degrees
! Estimated noise=0.615076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.838153 Jy
! Component: 100  -  total flux cleaned = 1.07679 Jy
! Component: 150  -  total flux cleaned = 1.20058 Jy
! Component: 200  -  total flux cleaned = 1.28749 Jy
! Total flux subtracted in 200 components = 1.28749 Jy
! Clean residual min=-0.046086 max=0.070068 Jy/beam
! Clean residual mean=0.000078 rms=0.013272 Jy/beam
! Combined flux in latest and established models = 1.28749 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 1.28749 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8685 mas, bmaj=2.382 mas, bpa=0.8364 degrees
! Estimated noise=0.372117 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122244 Jy
! Component: 100  -  total flux cleaned = 0.202187 Jy
! Component: 150  -  total flux cleaned = 0.261127 Jy
! Component: 200  -  total flux cleaned = 0.306723 Jy
! Total flux subtracted in 200 components = 0.306723 Jy
! Clean residual min=-0.035772 max=0.042714 Jy/beam
! Clean residual mean=0.000021 rms=0.010263 Jy/beam
! Combined flux in latest and established models = 1.59421 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 102 components and 1.59421 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.246 mas, bmaj=5.962 mas, bpa=8.443 degrees
! Estimated noise=0.464941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0619742 Jy
! Component: 100  -  total flux cleaned = 0.104379 Jy
! Component: 150  -  total flux cleaned = 0.13626 Jy
! Component: 200  -  total flux cleaned = 0.157298 Jy
! Total flux subtracted in 200 components = 0.157298 Jy
! Clean residual min=-0.033519 max=0.035480 Jy/beam
! Clean residual mean=0.000001 rms=0.010995 Jy/beam
! Combined flux in latest and established models = 1.75151 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014463 Jy
! Component: 100  -  total flux cleaned = 0.0263098 Jy
! Component: 150  -  total flux cleaned = 0.0360415 Jy
! Component: 200  -  total flux cleaned = 0.0436576 Jy
! Total flux subtracted in 200 components = 0.0436576 Jy
! Clean residual min=-0.031813 max=0.030786 Jy/beam
! Clean residual mean=-0.000003 rms=0.009899 Jy/beam
! Combined flux in latest and established models = 1.79517 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 168 components and 1.79517 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8685 mas, bmaj=2.382 mas, bpa=0.8364 degrees
! Estimated noise=0.372117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00713738 Jy
! Component: 100  -  total flux cleaned = 0.0102545 Jy
! Component: 150  -  total flux cleaned = 0.0134391 Jy
! Component: 200  -  total flux cleaned = 0.0162791 Jy
! Total flux subtracted in 200 components = 0.0162791 Jy
! Clean residual min=-0.025305 max=0.022479 Jy/beam
! Clean residual mean=0.000012 rms=0.006330 Jy/beam
! Combined flux in latest and established models = 1.81145 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 186 components and 1.81145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.156891Jy  sigma=2.101717
! Fit after  self-cal, rms=0.156336Jy  sigma=2.088063
wmodel /J0453-2807_X_map.mod
! wmodel: Unable to open new model file: /J0453-2807_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0453-2807_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8685 x 2.382 at 0.8364 degrees (North through East)
! Clean map  min=-0.023816  max=0.89781 Jy/beam
! Writing clean map to FITS file: .//J0453-2807_X_map.fits
wmodel .//J0453-2807_X_map.mod
! Writing 186 model components to file: .//J0453-2807_X_map.mod
wobs   .//J0453-2807_X_uvs.fits
! Writing UV FITS file: .//J0453-2807_X_uvs.fits
wwins  .//J0453-2807_X_map.win
! wwins: Wrote 6 windows to .//J0453-2807_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.897811 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00629344 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.10293 2.10293 4.20586 8.41172 16.8234 33.6469 67.2938
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0188 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.897 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  142.658 
quit
! Quitting program
! Log file .//J0453-2807_X_dfm.log closed on Wed Nov 16 11:49:43 2016