! Started logfile: .//J0433+0521_X_dfm.log on Wed Nov 16 11:49:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0433+0521_X_uvm.fits
! Reading UV FITS file: .//J0433+0521_X_uvm.fits
! AN table 1: 107 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.83946 visibilities/baseline/integration-bin.
! Found source: J0433+0521
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 32336 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0433+0521_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.713351Jy  sigma=53.928643
! Fit after  self-cal, rms=0.610364Jy  sigma=19.424119
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.742 mas, bmaj=2.06 mas, bpa=-6.17 degrees
! Estimated noise=0.190465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.902831 Jy
! Component: 100  -  total flux cleaned = 1.2838 Jy
! Total flux subtracted in 100 components = 1.2838 Jy
! Clean residual min=-0.079056 max=0.170502 Jy/beam
! Clean residual mean=0.000023 rms=0.012857 Jy/beam
! Combined flux in latest and established models = 1.2838 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.2838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.360614Jy  sigma=11.431788
! Fit after  self-cal, rms=0.359795Jy  sigma=11.409595
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181812 Jy
! Component: 100  -  total flux cleaned = 0.271103 Jy
! Total flux subtracted in 100 components = 0.271103 Jy
! Clean residual min=-0.028852 max=0.061762 Jy/beam
! Clean residual mean=0.000010 rms=0.006776 Jy/beam
! Combined flux in latest and established models = 1.5549 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 1.5549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.203411Jy  sigma=6.436825
! Fit after  self-cal, rms=0.203355Jy  sigma=6.433426
! Inverting map 
! Added new window around map position (-1.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0611684 Jy
! Component: 100  -  total flux cleaned = 0.101395 Jy
! Total flux subtracted in 100 components = 0.101395 Jy
! Clean residual min=-0.025108 max=0.036317 Jy/beam
! Clean residual mean=0.000005 rms=0.005429 Jy/beam
! Combined flux in latest and established models = 1.65629 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 26 components and 1.65629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.165524Jy  sigma=5.200605
! Fit after  self-cal, rms=0.164435Jy  sigma=5.167286
! Inverting map 
! Added new window around map position (-11.4, -5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0378343 Jy
! Component: 100  -  total flux cleaned = 0.0646604 Jy
! Total flux subtracted in 100 components = 0.0646604 Jy
! Clean residual min=-0.025170 max=0.034746 Jy/beam
! Clean residual mean=0.000003 rms=0.004771 Jy/beam
! Combined flux in latest and established models = 1.72095 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 36 components and 1.72095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.147583Jy  sigma=4.606679
! Fit after  self-cal, rms=0.147193Jy  sigma=4.596117
! Inverting map 
! Added new window around map position (-2.6, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0325567 Jy
! Component: 100  -  total flux cleaned = 0.054691 Jy
! Total flux subtracted in 100 components = 0.054691 Jy
! Clean residual min=-0.024256 max=0.022549 Jy/beam
! Clean residual mean=0.000001 rms=0.004224 Jy/beam
! Combined flux in latest and established models = 1.77564 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 1.77565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.133009Jy  sigma=4.154198
! Fit after  self-cal, rms=0.132417Jy  sigma=4.134852
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9353 mas, bmaj=2.278 mas, bpa=-4.453 degrees
! Estimated noise=0.126511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404545 Jy
! Component: 100  -  total flux cleaned = 0.071091 Jy
! Component: 150  -  total flux cleaned = 0.0957514 Jy
! Component: 200  -  total flux cleaned = 0.115954 Jy
! Total flux subtracted in 200 components = 0.115954 Jy
! Clean residual min=-0.030956 max=0.032758 Jy/beam
! Clean residual mean=0.000002 rms=0.007566 Jy/beam
! Combined flux in latest and established models = 1.8916 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 88 components and 1.8916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.112746Jy  sigma=3.530745
! Fit after  self-cal, rms=0.111937Jy  sigma=3.505196
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9353 x 2.278 at -4.453 degrees (North through East)
! Clean map  min=-0.030516  max=1.2121 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.02     KP        1.06     
!   LA        0.95     MK        0.98     NL        1.06     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.02     KP        1.06     
!   LA        0.95     MK        0.98     NL        1.06     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     HN        1.01     KP        1.06     
!   LA        0.95     MK        0.98     NL        1.06     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        1.02     KP        1.06     
!   LA        0.95     MK        0.99     NL        1.05     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.02     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.04     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     HN        1.02     KP        1.05     
!   LA        0.95     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        1.02     KP        1.05     
!   LA        0.95     MK        1.01     NL        1.05     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        1.01     KP        1.05     
!   LA        0.95     MK        1.02     NL        1.04     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.111937Jy  sigma=3.505196
! Fit after  self-cal, rms=0.070378Jy  sigma=2.277333
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9372 mas, bmaj=2.294 mas, bpa=-4.423 degrees
! Estimated noise=0.125914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.4, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248615 Jy
! Component: 100  -  total flux cleaned = 0.0408641 Jy
! Component: 150  -  total flux cleaned = 0.0466775 Jy
! Component: 200  -  total flux cleaned = 0.0489389 Jy
! Total flux subtracted in 200 components = 0.0489389 Jy
! Clean residual min=-0.009876 max=0.012101 Jy/beam
! Clean residual mean=-0.000012 rms=0.002327 Jy/beam
! Combined flux in latest and established models = 1.94054 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 113 components and 1.94054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059546Jy  sigma=1.903322
! Fit after  self-cal, rms=0.059179Jy  sigma=1.890196
! Inverting map 
! Added new window around map position (-9.4, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107312 Jy
! Component: 100  -  total flux cleaned = 0.015725 Jy
! Component: 150  -  total flux cleaned = 0.0182899 Jy
! Component: 200  -  total flux cleaned = 0.0201013 Jy
! Total flux subtracted in 200 components = 0.0201013 Jy
! Clean residual min=-0.007886 max=0.007529 Jy/beam
! Clean residual mean=-0.000013 rms=0.001963 Jy/beam
! Combined flux in latest and established models = 1.96064 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 138 components and 1.96064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056077Jy  sigma=1.791137
! Fit after  self-cal, rms=0.055962Jy  sigma=1.788376
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055962Jy  sigma=1.788376
! Fit after  self-cal, rms=0.043915Jy  sigma=1.347700
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9381 mas, bmaj=2.296 mas, bpa=-4.423 degrees
! Estimated noise=0.125755 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020844 Jy
! Component: 100  -  total flux cleaned = 0.00465924 Jy
! Component: 150  -  total flux cleaned = 0.00610938 Jy
! Component: 200  -  total flux cleaned = 0.0069075 Jy
! Total flux subtracted in 200 components = 0.0069075 Jy
! Clean residual min=-0.006382 max=0.006650 Jy/beam
! Clean residual mean=-0.000012 rms=0.001466 Jy/beam
! Combined flux in latest and established models = 1.96755 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 157 components and 1.96755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042144Jy  sigma=1.287713
! Fit after  self-cal, rms=0.042069Jy  sigma=1.286130
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-32.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0066554 Jy
! Component: 100  -  total flux cleaned = 0.0109246 Jy
! Component: 150  -  total flux cleaned = 0.0138643 Jy
! Component: 200  -  total flux cleaned = 0.0157959 Jy
! Total flux subtracted in 200 components = 0.0157959 Jy
! Clean residual min=-0.006022 max=0.005341 Jy/beam
! Clean residual mean=-0.000010 rms=0.001301 Jy/beam
! Combined flux in latest and established models = 1.98334 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 192 components and 1.98334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040739Jy  sigma=1.236337
! Fit after  self-cal, rms=0.040668Jy  sigma=1.234890
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040668Jy  sigma=1.234890
! Fit after  self-cal, rms=0.038706Jy  sigma=1.177257
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9386 mas, bmaj=2.297 mas, bpa=-4.412 degrees
! Estimated noise=0.125699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00196127 Jy
! Component: 100  -  total flux cleaned = -0.00123483 Jy
! Component: 150  -  total flux cleaned = -0.000484098 Jy
! Component: 200  -  total flux cleaned = 0.000200083 Jy
! Total flux subtracted in 200 components = 0.000200083 Jy
! Clean residual min=-0.005164 max=0.004593 Jy/beam
! Clean residual mean=-0.000007 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 1.98354 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 209 components and 1.98354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038076Jy  sigma=1.155205
! Fit after  self-cal, rms=0.038048Jy  sigma=1.154838
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000438895 Jy
! Component: 100  -  total flux cleaned = 0.00119501 Jy
! Component: 150  -  total flux cleaned = 0.00198485 Jy
! Component: 200  -  total flux cleaned = 0.00265299 Jy
! Total flux subtracted in 200 components = 0.00265299 Jy
! Clean residual min=-0.005106 max=0.004409 Jy/beam
! Clean residual mean=-0.000007 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 1.9862 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 228 components and 1.9862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037747Jy  sigma=1.144742
! Fit after  self-cal, rms=0.037735Jy  sigma=1.144625
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037735Jy  sigma=1.144625
! Fit after  self-cal, rms=0.037609Jy  sigma=1.141486
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.133 mas, bmaj=3.387 mas, bpa=1.88 degrees
! Estimated noise=0.155458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00363331 Jy
! Component: 100  -  total flux cleaned = 0.00541201 Jy
! Component: 150  -  total flux cleaned = 0.00618965 Jy
! Component: 200  -  total flux cleaned = 0.00674416 Jy
! Total flux subtracted in 200 components = 0.00674416 Jy
! Clean residual min=-0.006084 max=0.006426 Jy/beam
! Clean residual mean=-0.000014 rms=0.001862 Jy/beam
! Combined flux in latest and established models = 1.99294 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 239 components and 1.99294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037389Jy  sigma=1.132348
! Fit after  self-cal, rms=0.037355Jy  sigma=1.131678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000608505 Jy
! Component: 100  -  total flux cleaned = 0.00112759 Jy
! Component: 150  -  total flux cleaned = 0.00139085 Jy
! Component: 200  -  total flux cleaned = 0.00151513 Jy
! Total flux subtracted in 200 components = 0.00151513 Jy
! Clean residual min=-0.006106 max=0.006304 Jy/beam
! Clean residual mean=-0.000013 rms=0.001834 Jy/beam
! Combined flux in latest and established models = 1.99446 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 247 components and 1.99446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037332Jy  sigma=1.130347
! Fit after  self-cal, rms=0.037322Jy  sigma=1.130190
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9389 mas, bmaj=2.298 mas, bpa=-4.405 degrees
! Estimated noise=0.125657 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9389 x 2.298 at -4.405 degrees (North through East)
! Clean map  min=-0.0050439  max=1.2048 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037322Jy  sigma=1.130190
! Fit after  self-cal, rms=0.035569Jy  sigma=1.075692
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=2.299 mas, bpa=-4.414 degrees
! Estimated noise=0.125628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00207008 Jy
! Component: 100  -  total flux cleaned = -0.00207624 Jy
! Component: 150  -  total flux cleaned = -0.00194068 Jy
! Component: 200  -  total flux cleaned = -0.00200699 Jy
! Total flux subtracted in 200 components = -0.00200699 Jy
! Clean residual min=-0.004467 max=0.004241 Jy/beam
! Clean residual mean=-0.000007 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 1.99245 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 261 components and 1.99245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035280Jy  sigma=1.066464
! Fit after  self-cal, rms=0.035272Jy  sigma=1.066302
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144798 Jy
! Component: 100  -  total flux cleaned = 8.34934e-05 Jy
! Component: 150  -  total flux cleaned = 0.000193084 Jy
! Component: 200  -  total flux cleaned = 0.000248616 Jy
! Total flux subtracted in 200 components = 0.000248616 Jy
! Clean residual min=-0.004446 max=0.004143 Jy/beam
! Clean residual mean=-0.000006 rms=0.001034 Jy/beam
! Combined flux in latest and established models = 1.9927 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 268 components and 1.9927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035111Jy  sigma=1.061374
! Fit after  self-cal, rms=0.035107Jy  sigma=1.061287
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035107Jy  sigma=1.061287
! Fit after  self-cal, rms=0.035072Jy  sigma=1.059934
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.743 mas, bmaj=2.067 mas, bpa=-6.008 degrees
! Estimated noise=0.190651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.903349 Jy
! Component: 100  -  total flux cleaned = 1.28252 Jy
! Component: 150  -  total flux cleaned = 1.46357 Jy
! Component: 200  -  total flux cleaned = 1.55575 Jy
! Total flux subtracted in 200 components = 1.55575 Jy
! Clean residual min=-0.025162 max=0.046981 Jy/beam
! Clean residual mean=0.000008 rms=0.005565 Jy/beam
! Combined flux in latest and established models = 1.55575 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.55575 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9395 mas, bmaj=2.299 mas, bpa=-4.405 degrees
! Estimated noise=0.125639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0917422 Jy
! Component: 100  -  total flux cleaned = 0.150353 Jy
! Component: 150  -  total flux cleaned = 0.192448 Jy
! Component: 200  -  total flux cleaned = 0.224688 Jy
! Total flux subtracted in 200 components = 0.224688 Jy
! Clean residual min=-0.016515 max=0.019313 Jy/beam
! Clean residual mean=0.000007 rms=0.004723 Jy/beam
! Combined flux in latest and established models = 1.78044 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 48 components and 1.78044 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.135 mas, bmaj=3.39 mas, bpa=1.879 degrees
! Estimated noise=0.15529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0436625 Jy
! Component: 100  -  total flux cleaned = 0.075196 Jy
! Component: 150  -  total flux cleaned = 0.0992161 Jy
! Component: 200  -  total flux cleaned = 0.118292 Jy
! Total flux subtracted in 200 components = 0.118292 Jy
! Clean residual min=-0.014520 max=0.011854 Jy/beam
! Clean residual mean=-0.000007 rms=0.004135 Jy/beam
! Combined flux in latest and established models = 1.89873 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157656 Jy
! Component: 100  -  total flux cleaned = 0.028918 Jy
! Component: 150  -  total flux cleaned = 0.0399501 Jy
! Component: 200  -  total flux cleaned = 0.049263 Jy
! Total flux subtracted in 200 components = 0.049263 Jy
! Clean residual min=-0.009647 max=0.007601 Jy/beam
! Clean residual mean=-0.000009 rms=0.002646 Jy/beam
! Combined flux in latest and established models = 1.94799 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 126 components and 1.94799 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9395 mas, bmaj=2.299 mas, bpa=-4.405 degrees
! Estimated noise=0.125639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000262098 Jy
! Component: 100  -  total flux cleaned = 0.00223163 Jy
! Component: 150  -  total flux cleaned = 0.00426534 Jy
! Component: 200  -  total flux cleaned = 0.00611031 Jy
! Total flux subtracted in 200 components = 0.00611031 Jy
! Clean residual min=-0.006633 max=0.008828 Jy/beam
! Clean residual mean=-0.000005 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 1.9541 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 149 components and 1.9541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039682Jy  sigma=1.216444
! Fit after  self-cal, rms=0.039268Jy  sigma=1.199571
wmodel /J0433+0521_X_map.mod
! wmodel: Unable to open new model file: /J0433+0521_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0433+0521_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9395 x 2.299 at -4.405 degrees (North through East)
! Clean map  min=-0.0059344  max=1.2079 Jy/beam
! Writing clean map to FITS file: .//J0433+0521_X_map.fits
wmodel .//J0433+0521_X_map.mod
! Writing 149 model components to file: .//J0433+0521_X_map.mod
wobs   .//J0433+0521_X_uvs.fits
! Writing UV FITS file: .//J0433+0521_X_uvs.fits
wwins  .//J0433+0521_X_map.win
! wwins: Wrote 7 windows to .//J0433+0521_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.20792 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0013812 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.343035 0.343035 0.68607 1.37214 2.74428 5.48856 10.9771 21.9542 43.9085 87.817
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0041 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.207 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  874.546 
quit
! Quitting program
! Log file .//J0433+0521_X_dfm.log closed on Wed Nov 16 11:49:25 2016