! Started logfile: .//J0412+0438_X_dfm.log on Wed Nov 16 11:48:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0412+0438_X_uvm.fits
! Reading UV FITS file: .//J0412+0438_X_uvm.fits
! AN table 1: 122 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.771403 visibilities/baseline/integration-bin.
! Found source: J0412+0438
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 33880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0412+0438_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 182 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029669Jy  sigma=28.730286
! Fit after  self-cal, rms=0.739092Jy  sigma=20.819267
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.763 mas, bmaj=1.914 mas, bpa=-0.05531 degrees
! Estimated noise=0.235338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.197305 Jy
! Component: 100  -  total flux cleaned = 0.246172 Jy
! Total flux subtracted in 100 components = 0.246172 Jy
! Clean residual min=-0.005941 max=0.020132 Jy/beam
! Clean residual mean=0.000002 rms=0.001524 Jy/beam
! Combined flux in latest and established models = 0.246172 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.246172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058483Jy  sigma=1.476426
! Fit after  self-cal, rms=0.058457Jy  sigma=1.475525
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209262 Jy
! Component: 100  -  total flux cleaned = 0.0305905 Jy
! Total flux subtracted in 100 components = 0.0305905 Jy
! Clean residual min=-0.005564 max=0.005900 Jy/beam
! Clean residual mean=-0.000000 rms=0.001191 Jy/beam
! Combined flux in latest and established models = 0.276762 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.276762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049642Jy  sigma=1.264948
! Fit after  self-cal, rms=0.049639Jy  sigma=1.264753
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9897 mas, bmaj=2.304 mas, bpa=-2.372 degrees
! Estimated noise=0.14036 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550823 Jy
! Component: 100  -  total flux cleaned = 0.00807991 Jy
! Component: 150  -  total flux cleaned = 0.00897791 Jy
! Component: 200  -  total flux cleaned = 0.00913948 Jy
! Total flux subtracted in 200 components = 0.00913948 Jy
! Clean residual min=-0.006300 max=0.005749 Jy/beam
! Clean residual mean=-0.000009 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.285901 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.285901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048907Jy  sigma=1.252911
! Fit after  self-cal, rms=0.048907Jy  sigma=1.252903
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9897 x 2.304 at -2.372 degrees (North through East)
! Clean map  min=-0.0060919  max=0.25653 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.99     HN        0.93     KP        1.04     
!   LA        0.99     MK        1.01     NL        0.97     OV        0.98     
!   PT        0.93     SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.90     KP        1.05     
!   LA        0.94     MK        1.00     NL        1.01     OV        0.95     
!   PT        0.94     SC        0.92     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.91     KP        1.08     
!   LA        0.93     MK        1.03     NL        1.03     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.96     KP        0.99     
!   LA        0.98     MK        1.02     NL        0.98     OV        1.00     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.97     KP        1.13     
!   LA        0.96     MK        1.02     NL        1.07     OV        0.95     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.09     HN        1.02     KP        1.15     
!   LA        1.01     MK        1.03     NL        1.05     OV        1.01     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.08     HN        0.98     KP        1.16     
!   LA        0.97     MK        1.02     NL        0.95     OV        1.04     
!   PT        0.89     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.06     HN        0.97     KP        1.13     
!   LA        0.95     MK        1.02     NL        0.94     OV        0.98     
!   PT        0.92     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.048907Jy  sigma=1.252903
! Fit after  self-cal, rms=0.042945Jy  sigma=1.095387
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9897 mas, bmaj=2.313 mas, bpa=-2.085 degrees
! Estimated noise=0.14089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000664897 Jy
! Component: 100  -  total flux cleaned = 0.000567923 Jy
! Component: 150  -  total flux cleaned = 0.000527057 Jy
! Component: 200  -  total flux cleaned = 0.000457247 Jy
! Total flux subtracted in 200 components = 0.000457247 Jy
! Clean residual min=-0.006817 max=0.005268 Jy/beam
! Clean residual mean=0.000005 rms=0.001133 Jy/beam
! Combined flux in latest and established models = 0.286359 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 29 components and 0.286359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042829Jy  sigma=1.093811
! Fit after  self-cal, rms=0.042824Jy  sigma=1.093727
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042824Jy  sigma=1.093727
! Fit after  self-cal, rms=0.035756Jy  sigma=0.879417
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9911 mas, bmaj=2.314 mas, bpa=-2.169 degrees
! Estimated noise=0.137116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0051439 Jy
! Component: 100  -  total flux cleaned = -0.0068625 Jy
! Component: 150  -  total flux cleaned = -0.00773176 Jy
! Component: 200  -  total flux cleaned = -0.0081726 Jy
! Total flux subtracted in 200 components = -0.0081726 Jy
! Clean residual min=-0.002623 max=0.002609 Jy/beam
! Clean residual mean=0.000001 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.278186 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 49 components and 0.278186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035134Jy  sigma=0.856044
! Fit after  self-cal, rms=0.035138Jy  sigma=0.855999
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000192151 Jy
! Component: 100  -  total flux cleaned = -0.000230384 Jy
! Component: 150  -  total flux cleaned = -0.000230055 Jy
! Component: 200  -  total flux cleaned = -0.00023005 Jy
! Total flux subtracted in 200 components = -0.00023005 Jy
! Clean residual min=-0.002613 max=0.002630 Jy/beam
! Clean residual mean=0.000001 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.277956 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 52 components and 0.277956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035130Jy  sigma=0.855735
! Fit after  self-cal, rms=0.035129Jy  sigma=0.855735
! Inverting map 
! Added new window around map position (2.2, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220095 Jy
! Component: 100  -  total flux cleaned = 0.00251221 Jy
! Component: 150  -  total flux cleaned = 0.00253901 Jy
! Component: 200  -  total flux cleaned = 0.00251667 Jy
! Total flux subtracted in 200 components = 0.00251667 Jy
! Clean residual min=-0.002628 max=0.002164 Jy/beam
! Clean residual mean=0.000002 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.280473 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.280473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035009Jy  sigma=0.850701
! Fit after  self-cal, rms=0.035001Jy  sigma=0.850463
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035001Jy  sigma=0.850463
! Fit after  self-cal, rms=0.031898Jy  sigma=0.731840
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9904 mas, bmaj=2.312 mas, bpa=-2.132 degrees
! Estimated noise=0.13639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000713609 Jy
! Component: 100  -  total flux cleaned = -0.000817647 Jy
! Component: 150  -  total flux cleaned = -0.000923017 Jy
! Component: 200  -  total flux cleaned = -0.000959722 Jy
! Total flux subtracted in 200 components = -0.000959722 Jy
! Clean residual min=-0.001103 max=0.000652 Jy/beam
! Clean residual mean=-0.000000 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.279513 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.279513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031852Jy  sigma=0.730250
! Fit after  self-cal, rms=0.031854Jy  sigma=0.730220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.41229e-06 Jy
! Component: 100  -  total flux cleaned = -2.60438e-05 Jy
! Component: 150  -  total flux cleaned = -5.08152e-05 Jy
! Component: 200  -  total flux cleaned = -8.45214e-05 Jy
! Total flux subtracted in 200 components = -8.45214e-05 Jy
! Clean residual min=-0.001098 max=0.000664 Jy/beam
! Clean residual mean=-0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.279429 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.279429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031844Jy  sigma=0.729901
! Fit after  self-cal, rms=0.031843Jy  sigma=0.729892
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031843Jy  sigma=0.729892
! Fit after  self-cal, rms=0.031688Jy  sigma=0.729039
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.174 mas, bmaj=3.431 mas, bpa=-7.076 degrees
! Estimated noise=0.16752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111245 Jy
! Component: 100  -  total flux cleaned = -0.00142261 Jy
! Component: 150  -  total flux cleaned = -0.00143341 Jy
! Component: 200  -  total flux cleaned = -0.00144027 Jy
! Total flux subtracted in 200 components = -0.00144027 Jy
! Clean residual min=-0.001107 max=0.000848 Jy/beam
! Clean residual mean=-0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.277988 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 93 components and 0.277988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031663Jy  sigma=0.728207
! Fit after  self-cal, rms=0.031661Jy  sigma=0.728145
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.65067e-06 Jy
! Component: 100  -  total flux cleaned = 6.59783e-06 Jy
! Component: 150  -  total flux cleaned = 7.10145e-07 Jy
! Component: 200  -  total flux cleaned = 1.19762e-05 Jy
! Total flux subtracted in 200 components = 1.19762e-05 Jy
! Clean residual min=-0.001097 max=0.000859 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.278 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031660Jy  sigma=0.728128
! Fit after  self-cal, rms=0.031660Jy  sigma=0.728120
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9906 mas, bmaj=2.312 mas, bpa=-2.114 degrees
! Estimated noise=0.135783 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9906 x 2.312 at -2.114 degrees (North through East)
! Clean map  min=-0.000995  max=0.24832 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7633 mas, bmaj=1.915 mas, bpa=-0.02043 degrees
! Estimated noise=0.226522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.189755 Jy
! Component: 100  -  total flux cleaned = 0.236595 Jy
! Component: 150  -  total flux cleaned = 0.256477 Jy
! Component: 200  -  total flux cleaned = 0.265657 Jy
! Total flux subtracted in 200 components = 0.265657 Jy
! Clean residual min=-0.002205 max=0.004235 Jy/beam
! Clean residual mean=0.000000 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.265657 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.265657 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9906 mas, bmaj=2.312 mas, bpa=-2.114 degrees
! Estimated noise=0.135783 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00560656 Jy
! Component: 100  -  total flux cleaned = 0.00866288 Jy
! Component: 150  -  total flux cleaned = 0.0104997 Jy
! Component: 200  -  total flux cleaned = 0.0113916 Jy
! Total flux subtracted in 200 components = 0.0113916 Jy
! Clean residual min=-0.001071 max=0.000783 Jy/beam
! Clean residual mean=-0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.277049 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.277049 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.174 mas, bmaj=3.431 mas, bpa=-7.076 degrees
! Estimated noise=0.16752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000896195 Jy
! Component: 100  -  total flux cleaned = 0.00105529 Jy
! Component: 150  -  total flux cleaned = 0.0011327 Jy
! Component: 200  -  total flux cleaned = 0.00118574 Jy
! Total flux subtracted in 200 components = 0.00118574 Jy
! Clean residual min=-0.001172 max=0.000932 Jy/beam
! Clean residual mean=-0.000000 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.278235 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.18577e-08 Jy
! Component: 100  -  total flux cleaned = -2.08942e-05 Jy
! Component: 150  -  total flux cleaned = -3.06252e-05 Jy
! Component: 200  -  total flux cleaned = -4.90635e-05 Jy
! Total flux subtracted in 200 components = -4.90635e-05 Jy
! Clean residual min=-0.001144 max=0.000923 Jy/beam
! Clean residual mean=-0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.278186 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 55 components and 0.278186 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9906 mas, bmaj=2.312 mas, bpa=-2.114 degrees
! Estimated noise=0.135783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000267265 Jy
! Component: 100  -  total flux cleaned = -0.000270252 Jy
! Component: 150  -  total flux cleaned = -0.000213586 Jy
! Component: 200  -  total flux cleaned = -0.000179453 Jy
! Total flux subtracted in 200 components = -0.000179453 Jy
! Clean residual min=-0.001048 max=0.000649 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.278006 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 64 components and 0.278006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031679Jy  sigma=0.728693
! Fit after  self-cal, rms=0.031676Jy  sigma=0.728616
wmodel /J0412+0438_X_map.mod
! wmodel: Unable to open new model file: /J0412+0438_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0412+0438_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9906 x 2.312 at -2.114 degrees (North through East)
! Clean map  min=-0.0010023  max=0.2483 Jy/beam
! Writing clean map to FITS file: .//J0412+0438_X_map.fits
wmodel .//J0412+0438_X_map.mod
! Writing 64 model components to file: .//J0412+0438_X_map.mod
wobs   .//J0412+0438_X_uvs.fits
! Writing UV FITS file: .//J0412+0438_X_uvs.fits
wwins  .//J0412+0438_X_map.win
! wwins: Wrote 2 windows to .//J0412+0438_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.248302 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000187929 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.227056 0.227056 0.454112 0.908224 1.81645 3.6329 7.26579 14.5316 29.0632 58.1264
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.248 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1321.26 
quit
! Quitting program
! Log file .//J0412+0438_X_dfm.log closed on Wed Nov 16 11:48:54 2016