! Started logfile: .//J0403+2600_X_dfm.log on Wed Nov 16 11:48:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0403+2600_X_uva.fits
! Reading UV FITS file: .//J0403+2600_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.810298 visibilities/baseline/integration-bin.
! Found source: J0403+2600
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 11960 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0403+2600_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.251656Jy  sigma=39.241446
! Fit after  self-cal, rms=0.590386Jy  sigma=17.765892
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7492 mas, bmaj=1.819 mas, bpa=-2.197 degrees
! Estimated noise=0.355309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.435975 Jy
! Component: 100  -  total flux cleaned = 0.648493 Jy
! Total flux subtracted in 100 components = 0.648493 Jy
! Clean residual min=-0.062607 max=0.186269 Jy/beam
! Clean residual mean=-0.000074 rms=0.015341 Jy/beam
! Combined flux in latest and established models = 0.648493 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.648493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.349599Jy  sigma=10.797045
! Fit after  self-cal, rms=0.332436Jy  sigma=10.365331
! Inverting map 
! Added new window around map position (-1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.186926 Jy
! Component: 100  -  total flux cleaned = 0.290671 Jy
! Total flux subtracted in 100 components = 0.290671 Jy
! Clean residual min=-0.026815 max=0.054440 Jy/beam
! Clean residual mean=-0.000040 rms=0.006228 Jy/beam
! Combined flux in latest and established models = 0.939164 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.939164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.155318Jy  sigma=4.734507
! Fit after  self-cal, rms=0.152202Jy  sigma=4.645143
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0696365 Jy
! Component: 100  -  total flux cleaned = 0.113955 Jy
! Total flux subtracted in 100 components = 0.113955 Jy
! Clean residual min=-0.014434 max=0.023637 Jy/beam
! Clean residual mean=-0.000027 rms=0.003604 Jy/beam
! Combined flux in latest and established models = 1.05312 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 1.05312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096367Jy  sigma=2.908011
! Fit after  self-cal, rms=0.095949Jy  sigma=2.894625
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0296465 Jy
! Component: 100  -  total flux cleaned = 0.048976 Jy
! Total flux subtracted in 100 components = 0.048976 Jy
! Clean residual min=-0.014426 max=0.015433 Jy/beam
! Clean residual mean=-0.000021 rms=0.002938 Jy/beam
! Combined flux in latest and established models = 1.10209 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 1.10209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080812Jy  sigma=2.465862
! Fit after  self-cal, rms=0.080735Jy  sigma=2.463262
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9679 mas, bmaj=2.131 mas, bpa=-1.852 degrees
! Estimated noise=0.211479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021292 Jy
! Component: 100  -  total flux cleaned = 0.0352581 Jy
! Component: 150  -  total flux cleaned = 0.0448771 Jy
! Component: 200  -  total flux cleaned = 0.0515908 Jy
! Total flux subtracted in 200 components = 0.0515908 Jy
! Clean residual min=-0.016610 max=0.019395 Jy/beam
! Clean residual mean=-0.000068 rms=0.004464 Jy/beam
! Combined flux in latest and established models = 1.15369 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 1.15369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073440Jy  sigma=2.265145
! Fit after  self-cal, rms=0.073363Jy  sigma=2.263119
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9679 x 2.131 at -1.852 degrees (North through East)
! Clean map  min=-0.015555  max=0.58159 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.88     HN        0.99     KP        1.09     
!   LA        0.95     MK        0.95     NL        1.03     OV        0.98     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.88     HN        1.01     KP        1.08     
!   LA        0.95     MK        0.95     NL        1.05     OV        0.98     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.00     KP        1.08     
!   LA        0.95     MK        0.96     NL        1.04     OV        0.98     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.01     KP        1.09     
!   LA        0.95     MK        0.97     NL        1.04     OV        0.98     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.02     KP        1.10     
!   LA        0.96     MK        0.99     NL        1.04     OV        0.99     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.01     KP        1.10     
!   LA        0.96     MK        0.99     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.02     KP        1.10     
!   LA        0.96     MK        1.00     NL        1.05     OV        0.99     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.90     HN        1.02     KP        1.10     
!   LA        0.97     MK        1.00     NL        1.05     OV        1.00     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.073363Jy  sigma=2.263119
! Fit after  self-cal, rms=0.043584Jy  sigma=1.242014
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9597 mas, bmaj=2.131 mas, bpa=-1.553 degrees
! Estimated noise=0.208757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.8, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014203 Jy
! Component: 100  -  total flux cleaned = 0.0235685 Jy
! Component: 150  -  total flux cleaned = 0.0272246 Jy
! Component: 200  -  total flux cleaned = 0.029407 Jy
! Total flux subtracted in 200 components = 0.029407 Jy
! Clean residual min=-0.005724 max=0.006859 Jy/beam
! Clean residual mean=-0.000005 rms=0.001325 Jy/beam
! Combined flux in latest and established models = 1.18309 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 76 components and 1.18309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037527Jy  sigma=1.027540
! Fit after  self-cal, rms=0.037308Jy  sigma=1.019717
! Inverting map 
! Added new window around map position (2, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00662862 Jy
! Component: 100  -  total flux cleaned = 0.00839151 Jy
! Component: 150  -  total flux cleaned = 0.00972423 Jy
! Component: 200  -  total flux cleaned = 0.0110006 Jy
! Total flux subtracted in 200 components = 0.0110006 Jy
! Clean residual min=-0.005202 max=0.005411 Jy/beam
! Clean residual mean=-0.000003 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 1.19409 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 96 components and 1.19409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035324Jy  sigma=0.950829
! Fit after  self-cal, rms=0.035129Jy  sigma=0.942506
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035129Jy  sigma=0.942506
! Fit after  self-cal, rms=0.032716Jy  sigma=0.861394
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9602 mas, bmaj=2.123 mas, bpa=-1.449 degrees
! Estimated noise=0.209138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242755 Jy
! Component: 100  -  total flux cleaned = 0.00367406 Jy
! Component: 150  -  total flux cleaned = 0.00445731 Jy
! Component: 200  -  total flux cleaned = 0.00503066 Jy
! Total flux subtracted in 200 components = 0.00503066 Jy
! Clean residual min=-0.003533 max=0.003648 Jy/beam
! Clean residual mean=-0.000004 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 1.19912 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 113 components and 1.19912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031419Jy  sigma=0.813809
! Fit after  self-cal, rms=0.031318Jy  sigma=0.809408
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, 8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362695 Jy
! Component: 100  -  total flux cleaned = 0.00550948 Jy
! Component: 150  -  total flux cleaned = 0.00681261 Jy
! Component: 200  -  total flux cleaned = 0.00751546 Jy
! Total flux subtracted in 200 components = 0.00751546 Jy
! Clean residual min=-0.003172 max=0.002688 Jy/beam
! Clean residual mean=-0.000003 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 1.20664 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 133 components and 1.20664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030537Jy  sigma=0.781533
! Fit after  self-cal, rms=0.030502Jy  sigma=0.780147
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030502Jy  sigma=0.780147
! Fit after  self-cal, rms=0.030332Jy  sigma=0.775680
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9603 mas, bmaj=2.122 mas, bpa=-1.466 degrees
! Estimated noise=0.209042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117662 Jy
! Component: 100  -  total flux cleaned = 0.000455937 Jy
! Component: 150  -  total flux cleaned = 0.000838534 Jy
! Component: 200  -  total flux cleaned = 0.00139045 Jy
! Total flux subtracted in 200 components = 0.00139045 Jy
! Clean residual min=-0.002595 max=0.002373 Jy/beam
! Clean residual mean=-0.000003 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 1.20803 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 141 components and 1.20803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029888Jy  sigma=0.759275
! Fit after  self-cal, rms=0.029857Jy  sigma=0.757923
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000881208 Jy
! Component: 100  -  total flux cleaned = 0.00114312 Jy
! Component: 150  -  total flux cleaned = 0.00137423 Jy
! Component: 200  -  total flux cleaned = 0.0015921 Jy
! Total flux subtracted in 200 components = 0.0015921 Jy
! Clean residual min=-0.002342 max=0.002151 Jy/beam
! Clean residual mean=-0.000003 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 1.20962 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 146 components and 1.20962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029608Jy  sigma=0.749087
! Fit after  self-cal, rms=0.029590Jy  sigma=0.748318
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029590Jy  sigma=0.748318
! Fit after  self-cal, rms=0.029526Jy  sigma=0.746412
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.043 mas, bmaj=2.953 mas, bpa=-1.995 degrees
! Estimated noise=0.259782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000688106 Jy
! Component: 100  -  total flux cleaned = 0.00109369 Jy
! Component: 150  -  total flux cleaned = 0.00152406 Jy
! Component: 200  -  total flux cleaned = 0.00170394 Jy
! Total flux subtracted in 200 components = 0.00170394 Jy
! Clean residual min=-0.002346 max=0.002435 Jy/beam
! Clean residual mean=-0.000005 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 1.21133 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 173 components and 1.21133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029364Jy  sigma=0.740617
! Fit after  self-cal, rms=0.029349Jy  sigma=0.739685
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00069252 Jy
! Component: 100  -  total flux cleaned = 0.00078126 Jy
! Component: 150  -  total flux cleaned = 0.000856674 Jy
! Component: 200  -  total flux cleaned = 0.00098725 Jy
! Total flux subtracted in 200 components = 0.00098725 Jy
! Clean residual min=-0.002297 max=0.002190 Jy/beam
! Clean residual mean=-0.000005 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 1.21231 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 190 components and 1.21231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029271Jy  sigma=0.737101
! Fit after  self-cal, rms=0.029263Jy  sigma=0.736609
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9607 mas, bmaj=2.123 mas, bpa=-1.463 degrees
! Estimated noise=0.209051 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9607 x 2.123 at -1.463 degrees (North through East)
! Clean map  min=-0.0016787  max=0.57162 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029263Jy  sigma=0.736609
! Fit after  self-cal, rms=0.026927Jy  sigma=0.669942
! Inverting map and beam 
! Estimated beam: bmin=0.9611 mas, bmaj=2.124 mas, bpa=-1.447 degrees
! Estimated noise=0.209071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000487477 Jy
! Component: 100  -  total flux cleaned = -0.000740232 Jy
! Component: 150  -  total flux cleaned = -0.00082853 Jy
! Component: 200  -  total flux cleaned = -0.000990274 Jy
! Total flux subtracted in 200 components = -0.000990274 Jy
! Clean residual min=-0.001545 max=0.001754 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 1.21132 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 199 components and 1.21132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026768Jy  sigma=0.664186
! Fit after  self-cal, rms=0.026758Jy  sigma=0.663803
! Inverting map 
! Added new window around map position (-3.6, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122404 Jy
! Component: 100  -  total flux cleaned = 0.00147624 Jy
! Component: 150  -  total flux cleaned = 0.00166372 Jy
! Component: 200  -  total flux cleaned = 0.00183809 Jy
! Total flux subtracted in 200 components = 0.00183809 Jy
! Clean residual min=-0.001435 max=0.001649 Jy/beam
! Clean residual mean=-0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 1.21316 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 210 components and 1.21316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026618Jy  sigma=0.659094
! Fit after  self-cal, rms=0.026608Jy  sigma=0.658845
! Inverting map 
! Added new window around map position (-10.4, 9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397164 Jy
! Component: 100  -  total flux cleaned = 0.000670518 Jy
! Component: 150  -  total flux cleaned = 0.000882835 Jy
! Component: 200  -  total flux cleaned = 0.00108108 Jy
! Total flux subtracted in 200 components = 0.00108108 Jy
! Clean residual min=-0.001422 max=0.001449 Jy/beam
! Clean residual mean=-0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 1.21424 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 221 components and 1.21424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026479Jy  sigma=0.654364
! Fit after  self-cal, rms=0.026473Jy  sigma=0.654229
! Inverting map 
! Added new window around map position (13.6, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000920136 Jy
! Component: 100  -  total flux cleaned = 0.0010635 Jy
! Component: 150  -  total flux cleaned = 0.00119651 Jy
! Component: 200  -  total flux cleaned = 0.00131946 Jy
! Total flux subtracted in 200 components = 0.00131946 Jy
! Clean residual min=-0.001345 max=0.001194 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 1.21556 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 239 components and 1.21556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026365Jy  sigma=0.650296
! Fit after  self-cal, rms=0.026362Jy  sigma=0.650215
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026362Jy  sigma=0.650215
! Fit after  self-cal, rms=0.026314Jy  sigma=0.649183
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7443 mas, bmaj=1.81 mas, bpa=-1.792 degrees
! Estimated noise=0.349969 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.4441 Jy
! Component: 100  -  total flux cleaned = 0.687813 Jy
! Component: 150  -  total flux cleaned = 0.840217 Jy
! Component: 200  -  total flux cleaned = 0.936993 Jy
! Total flux subtracted in 200 components = 0.936993 Jy
! Clean residual min=-0.017917 max=0.050761 Jy/beam
! Clean residual mean=-0.000026 rms=0.005104 Jy/beam
! Combined flux in latest and established models = 0.936993 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.936993 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9609 mas, bmaj=2.123 mas, bpa=-1.465 degrees
! Estimated noise=0.209043 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0882085 Jy
! Component: 100  -  total flux cleaned = 0.133264 Jy
! Component: 150  -  total flux cleaned = 0.159668 Jy
! Component: 200  -  total flux cleaned = 0.17808 Jy
! Total flux subtracted in 200 components = 0.17808 Jy
! Clean residual min=-0.006042 max=0.011188 Jy/beam
! Clean residual mean=-0.000032 rms=0.002235 Jy/beam
! Combined flux in latest and established models = 1.11507 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 45 components and 1.11507 Jy
! Inverting map 
! Added new window around map position (0.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142683 Jy
! Component: 100  -  total flux cleaned = 0.0256439 Jy
! Component: 150  -  total flux cleaned = 0.0348469 Jy
! Component: 200  -  total flux cleaned = 0.0423903 Jy
! Total flux subtracted in 200 components = 0.0423903 Jy
! Clean residual min=-0.003245 max=0.005538 Jy/beam
! Clean residual mean=-0.000018 rms=0.001150 Jy/beam
! Combined flux in latest and established models = 1.15746 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 90 components and 1.15746 Jy
! Inverting map 
! Added new window around map position (26.2, 35.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00636329 Jy
! Component: 100  -  total flux cleaned = 0.0115946 Jy
! Component: 150  -  total flux cleaned = 0.0160149 Jy
! Component: 200  -  total flux cleaned = 0.0198048 Jy
! Total flux subtracted in 200 components = 0.0198048 Jy
! Clean residual min=-0.002231 max=0.003091 Jy/beam
! Clean residual mean=-0.000012 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 1.17727 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 136 components and 1.17727 Jy
! Inverting map 
! Added new window around map position (3.8, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00344762 Jy
! Component: 100  -  total flux cleaned = 0.00637449 Jy
! Component: 150  -  total flux cleaned = 0.00897936 Jy
! Component: 200  -  total flux cleaned = 0.0113156 Jy
! Total flux subtracted in 200 components = 0.0113156 Jy
! Clean residual min=-0.001794 max=0.002101 Jy/beam
! Clean residual mean=-0.000009 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 1.18858 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 177 components and 1.18858 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.044 mas, bmaj=2.954 mas, bpa=-1.98 degrees
! Estimated noise=0.259668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380781 Jy
! Component: 100  -  total flux cleaned = 0.00681552 Jy
! Component: 150  -  total flux cleaned = 0.00932846 Jy
! Component: 200  -  total flux cleaned = 0.0115023 Jy
! Total flux subtracted in 200 components = 0.0115023 Jy
! Clean residual min=-0.001892 max=0.002081 Jy/beam
! Clean residual mean=-0.000013 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 1.20009 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190674 Jy
! Component: 100  -  total flux cleaned = 0.00358837 Jy
! Component: 150  -  total flux cleaned = 0.0050768 Jy
! Component: 200  -  total flux cleaned = 0.00639875 Jy
! Total flux subtracted in 200 components = 0.00639875 Jy
! Clean residual min=-0.001637 max=0.001492 Jy/beam
! Clean residual mean=-0.000010 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 1.20649 Jy
! Adding 158 model components to the UV plane model.
! The established model now contains 300 components and 1.20649 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9609 mas, bmaj=2.123 mas, bpa=-1.465 degrees
! Estimated noise=0.209043 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000906047 Jy
! Component: 100  -  total flux cleaned = 0.00164181 Jy
! Component: 150  -  total flux cleaned = 0.0023038 Jy
! Component: 200  -  total flux cleaned = 0.00288146 Jy
! Total flux subtracted in 200 components = 0.00288146 Jy
! Clean residual min=-0.001268 max=0.001176 Jy/beam
! Clean residual mean=-0.000004 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 1.20937 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 331 components and 1.20937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026171Jy  sigma=0.644489
! Fit after  self-cal, rms=0.026132Jy  sigma=0.642803
wmodel /J0403+2600_X_map.mod
! wmodel: Unable to open new model file: /J0403+2600_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0403+2600_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9609 x 2.123 at -1.465 degrees (North through East)
! Clean map  min=-0.0011457  max=0.57224 Jy/beam
! Writing clean map to FITS file: .//J0403+2600_X_map.fits
wmodel .//J0403+2600_X_map.mod
! Writing 331 model components to file: .//J0403+2600_X_map.mod
wobs   .//J0403+2600_X_uvs.fits
! Writing UV FITS file: .//J0403+2600_X_uvs.fits
wwins  .//J0403+2600_X_map.win
! wwins: Wrote 11 windows to .//J0403+2600_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.57224 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000286851 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.150383 0.150383 0.300767 0.601533 1.20307 2.40613 4.81227 9.62453 19.2491 38.4981 76.9963
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.572 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1994.9 
quit
! Quitting program
! Log file .//J0403+2600_X_dfm.log closed on Wed Nov 16 11:48:43 2016