! Started logfile: .//J0358+5606_X_dfm.log on Wed Nov 16 11:48:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0358+5606_X_uva.fits
! Reading UV FITS file: .//J0358+5606_X_uva.fits
! AN table 1: 92 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.801208 visibilities/baseline/integration-bin.
! Found source: J0358+5606
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 26536 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0358+5606_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.095108Jy  sigma=34.527446
! Fit after  self-cal, rms=0.538315Jy  sigma=16.805460
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.729 mas, bmaj=1.644 mas, bpa=19.5 degrees
! Estimated noise=0.267609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.346183 Jy
! Component: 100  -  total flux cleaned = 0.423309 Jy
! Total flux subtracted in 100 components = 0.423309 Jy
! Clean residual min=-0.012916 max=0.026640 Jy/beam
! Clean residual mean=0.000047 rms=0.002252 Jy/beam
! Combined flux in latest and established models = 0.423309 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.423309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086911Jy  sigma=2.554408
! Fit after  self-cal, rms=0.086834Jy  sigma=2.553352
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299823 Jy
! Component: 100  -  total flux cleaned = 0.0471424 Jy
! Total flux subtracted in 100 components = 0.0471424 Jy
! Clean residual min=-0.007495 max=0.009437 Jy/beam
! Clean residual mean=0.000026 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.470451 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.470451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068717Jy  sigma=1.900229
! Fit after  self-cal, rms=0.068709Jy  sigma=1.899699
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105806 Jy
! Component: 100  -  total flux cleaned = 0.0175374 Jy
! Total flux subtracted in 100 components = 0.0175374 Jy
! Clean residual min=-0.007620 max=0.008775 Jy/beam
! Clean residual mean=0.000018 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.487988 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.487988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065064Jy  sigma=1.762028
! Fit after  self-cal, rms=0.065057Jy  sigma=1.761809
! Inverting map 
! Added new window around map position (-1.8, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00887954 Jy
! Component: 100  -  total flux cleaned = 0.0149199 Jy
! Total flux subtracted in 100 components = 0.0149199 Jy
! Clean residual min=-0.006973 max=0.007957 Jy/beam
! Clean residual mean=0.000013 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 0.502908 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 0.502908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.062390Jy  sigma=1.659492
! Fit after  self-cal, rms=0.062233Jy  sigma=1.653670
! Inverting map 
! Added new window around map position (2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0076356 Jy
! Component: 100  -  total flux cleaned = 0.0132135 Jy
! Total flux subtracted in 100 components = 0.0132135 Jy
! Clean residual min=-0.005980 max=0.005947 Jy/beam
! Clean residual mean=0.000009 rms=0.001091 Jy/beam
! Combined flux in latest and established models = 0.516122 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 56 components and 0.516122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060172Jy  sigma=1.575237
! Fit after  self-cal, rms=0.060127Jy  sigma=1.573523
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9627 mas, bmaj=1.974 mas, bpa=16.81 degrees
! Estimated noise=0.14141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112771 Jy
! Component: 100  -  total flux cleaned = 0.0194577 Jy
! Component: 150  -  total flux cleaned = 0.0257114 Jy
! Component: 200  -  total flux cleaned = 0.0305931 Jy
! Total flux subtracted in 200 components = 0.0305931 Jy
! Clean residual min=-0.005391 max=0.007258 Jy/beam
! Clean residual mean=0.000006 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.546715 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 84 components and 0.546715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057333Jy  sigma=1.463534
! Fit after  self-cal, rms=0.057276Jy  sigma=1.461532
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9627 x 1.974 at 16.81 degrees (North through East)
! Clean map  min=-0.0052221  max=0.459 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.01     KP        1.06     
!   LA        0.96     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.01     KP        1.05     
!   LA        0.96     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.00     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.01     KP        1.05     
!   LA        0.96     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.01     KP        1.05     
!   LA        0.96     MK        1.00     NL        1.03     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.02     KP        1.05     
!   LA        0.96     MK        1.00     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.01     KP        1.05     
!   LA        0.96     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.01     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.04     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.057276Jy  sigma=1.461532
! Fit after  self-cal, rms=0.053073Jy  sigma=1.305641
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9671 mas, bmaj=1.988 mas, bpa=16.58 degrees
! Estimated noise=0.140934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000727661 Jy
! Component: 100  -  total flux cleaned = -0.00107426 Jy
! Component: 150  -  total flux cleaned = -0.0014136 Jy
! Component: 200  -  total flux cleaned = -0.00141697 Jy
! Total flux subtracted in 200 components = -0.00141697 Jy
! Clean residual min=-0.003309 max=0.003495 Jy/beam
! Clean residual mean=-0.000029 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.545298 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 97 components and 0.545298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052805Jy  sigma=1.294746
! Fit after  self-cal, rms=0.052789Jy  sigma=1.294303
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052789Jy  sigma=1.294303
! Fit after  self-cal, rms=0.052371Jy  sigma=1.256588
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9665 mas, bmaj=1.986 mas, bpa=16.66 degrees
! Estimated noise=0.140691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00149568 Jy
! Component: 100  -  total flux cleaned = -0.00175555 Jy
! Component: 150  -  total flux cleaned = -0.00197067 Jy
! Component: 200  -  total flux cleaned = -0.0021234 Jy
! Total flux subtracted in 200 components = -0.0021234 Jy
! Clean residual min=-0.001879 max=0.002274 Jy/beam
! Clean residual mean=-0.000005 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.543174 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 0.543174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052301Jy  sigma=1.253742
! Fit after  self-cal, rms=0.052297Jy  sigma=1.253623
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226846 Jy
! Component: 100  -  total flux cleaned = 0.00301717 Jy
! Component: 150  -  total flux cleaned = 0.003017 Jy
! Component: 200  -  total flux cleaned = 0.0029842 Jy
! Total flux subtracted in 200 components = 0.0029842 Jy
! Clean residual min=-0.001855 max=0.001823 Jy/beam
! Clean residual mean=-0.000008 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.546158 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 0.546158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052183Jy  sigma=1.249282
! Fit after  self-cal, rms=0.052177Jy  sigma=1.249082
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052177Jy  sigma=1.249082
! Fit after  self-cal, rms=0.052129Jy  sigma=1.248220
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9661 mas, bmaj=1.985 mas, bpa=16.64 degrees
! Estimated noise=0.140516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000901642 Jy
! Component: 100  -  total flux cleaned = -0.0008647 Jy
! Component: 150  -  total flux cleaned = -0.000805483 Jy
! Component: 200  -  total flux cleaned = -0.000831641 Jy
! Total flux subtracted in 200 components = -0.000831641 Jy
! Clean residual min=-0.001894 max=0.001840 Jy/beam
! Clean residual mean=-0.000009 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.545327 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 135 components and 0.545327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052081Jy  sigma=1.246501
! Fit after  self-cal, rms=0.052080Jy  sigma=1.246467
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.37836e-05 Jy
! Component: 100  -  total flux cleaned = 2.41072e-05 Jy
! Component: 150  -  total flux cleaned = 2.39376e-05 Jy
! Component: 200  -  total flux cleaned = 4.30919e-05 Jy
! Total flux subtracted in 200 components = 4.30919e-05 Jy
! Clean residual min=-0.001901 max=0.001822 Jy/beam
! Clean residual mean=-0.000009 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.54537 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 143 components and 0.54537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052065Jy  sigma=1.245837
! Fit after  self-cal, rms=0.052064Jy  sigma=1.245825
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052064Jy  sigma=1.245825
! Fit after  self-cal, rms=0.052034Jy  sigma=1.245335
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.875 mas, bpa=15.93 degrees
! Estimated noise=0.175259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000844552 Jy
! Component: 100  -  total flux cleaned = -0.00108866 Jy
! Component: 150  -  total flux cleaned = -0.00118468 Jy
! Component: 200  -  total flux cleaned = -0.00124449 Jy
! Total flux subtracted in 200 components = -0.00124449 Jy
! Clean residual min=-0.001588 max=0.002046 Jy/beam
! Clean residual mean=-0.000021 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.544125 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 158 components and 0.544125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052018Jy  sigma=1.244771
! Fit after  self-cal, rms=0.052017Jy  sigma=1.244729
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21.2, -38.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00083395 Jy
! Component: 100  -  total flux cleaned = 0.00123808 Jy
! Component: 150  -  total flux cleaned = 0.00127504 Jy
! Component: 200  -  total flux cleaned = 0.00130533 Jy
! Total flux subtracted in 200 components = 0.00130533 Jy
! Clean residual min=-0.001705 max=0.001846 Jy/beam
! Clean residual mean=-0.000016 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.545431 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 182 components and 0.545431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051945Jy  sigma=1.242623
! Fit after  self-cal, rms=0.051942Jy  sigma=1.242473
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9658 mas, bmaj=1.985 mas, bpa=16.63 degrees
! Estimated noise=0.140394 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9658 x 1.985 at 16.63 degrees (North through East)
! Clean map  min=-0.001696  max=0.45699 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7285 mas, bmaj=1.643 mas, bpa=19.69 degrees
! Estimated noise=0.267232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.344585 Jy
! Component: 100  -  total flux cleaned = 0.421712 Jy
! Component: 150  -  total flux cleaned = 0.451794 Jy
! Component: 200  -  total flux cleaned = 0.469165 Jy
! Total flux subtracted in 200 components = 0.469165 Jy
! Clean residual min=-0.005293 max=0.008930 Jy/beam
! Clean residual mean=0.000028 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.469165 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.469165 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9658 mas, bmaj=1.985 mas, bpa=16.63 degrees
! Estimated noise=0.140394 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197443 Jy
! Component: 100  -  total flux cleaned = 0.0320814 Jy
! Component: 150  -  total flux cleaned = 0.0409158 Jy
! Component: 200  -  total flux cleaned = 0.0477195 Jy
! Total flux subtracted in 200 components = 0.0477195 Jy
! Clean residual min=-0.002656 max=0.004758 Jy/beam
! Clean residual mean=0.000029 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.516884 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 56 components and 0.516884 Jy
! Inverting map 
! Added new window around map position (0.4, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545518 Jy
! Component: 100  -  total flux cleaned = 0.00966592 Jy
! Component: 150  -  total flux cleaned = 0.0130491 Jy
! Component: 200  -  total flux cleaned = 0.0158375 Jy
! Total flux subtracted in 200 components = 0.0158375 Jy
! Clean residual min=-0.002081 max=0.002166 Jy/beam
! Clean residual mean=0.000008 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.532722 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 85 components and 0.532722 Jy
! Inverting map 
! Added new window around map position (-27.6, -25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244969 Jy
! Component: 100  -  total flux cleaned = 0.00444742 Jy
! Component: 150  -  total flux cleaned = 0.00614799 Jy
! Component: 200  -  total flux cleaned = 0.00749613 Jy
! Total flux subtracted in 200 components = 0.00749613 Jy
! Clean residual min=-0.001880 max=0.001737 Jy/beam
! Clean residual mean=0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.540218 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 118 components and 0.540218 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.875 mas, bpa=15.93 degrees
! Estimated noise=0.175259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179134 Jy
! Component: 100  -  total flux cleaned = 0.00272691 Jy
! Component: 150  -  total flux cleaned = 0.00354241 Jy
! Component: 200  -  total flux cleaned = 0.00421882 Jy
! Total flux subtracted in 200 components = 0.00421882 Jy
! Clean residual min=-0.001705 max=0.002073 Jy/beam
! Clean residual mean=-0.000003 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.544437 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27, 24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205254 Jy
! Component: 100  -  total flux cleaned = 0.00329805 Jy
! Component: 150  -  total flux cleaned = 0.00389219 Jy
! Component: 200  -  total flux cleaned = 0.00423361 Jy
! Total flux subtracted in 200 components = 0.00423361 Jy
! Clean residual min=-0.001349 max=0.001383 Jy/beam
! Clean residual mean=-0.000005 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.548671 Jy
! Adding 99 model components to the UV plane model.
! The established model now contains 208 components and 0.548671 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9658 mas, bmaj=1.985 mas, bpa=16.63 degrees
! Estimated noise=0.140394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184646 Jy
! Component: 100  -  total flux cleaned = -0.000413061 Jy
! Component: 150  -  total flux cleaned = -0.000452026 Jy
! Component: 200  -  total flux cleaned = -0.000452297 Jy
! Total flux subtracted in 200 components = -0.000452297 Jy
! Clean residual min=-0.001554 max=0.001241 Jy/beam
! Clean residual mean=-0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.548218 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 234 components and 0.548218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051779Jy  sigma=1.237894
! Fit after  self-cal, rms=0.051773Jy  sigma=1.237649
wmodel /J0358+5606_X_map.mod
! wmodel: Unable to open new model file: /J0358+5606_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0358+5606_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9658 x 1.985 at 16.63 degrees (North through East)
! Clean map  min=-0.0014296  max=0.45687 Jy/beam
! Writing clean map to FITS file: .//J0358+5606_X_map.fits
wmodel .//J0358+5606_X_map.mod
! Writing 234 model components to file: .//J0358+5606_X_map.mod
wobs   .//J0358+5606_X_uvs.fits
! Writing UV FITS file: .//J0358+5606_X_uvs.fits
wwins  .//J0358+5606_X_map.win
! wwins: Wrote 8 windows to .//J0358+5606_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.456866 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000289078 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.189822 0.189822 0.379644 0.759288 1.51858 3.03715 6.0743 12.1486 24.2972 48.5944 97.1888
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.456 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1580.43 
quit
! Quitting program
! Log file .//J0358+5606_X_dfm.log closed on Wed Nov 16 11:48:33 2016