! Started logfile: .//J0345+1453_X_dfm.log on Wed Nov 16 11:48:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0345+1453_X_uva.fits
! Reading UV FITS file: .//J0345+1453_X_uva.fits
! AN table 1: 39 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.822222 visibilities/baseline/integration-bin.
! Found source: J0345+1453
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 11544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0345+1453_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.212873Jy  sigma=38.489437
! Fit after  self-cal, rms=0.338640Jy  sigma=10.850865
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7414 mas, bmaj=1.89 mas, bpa=-2.944 degrees
! Estimated noise=0.341294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.507789 Jy
! Component: 100  -  total flux cleaned = 0.620319 Jy
! Total flux subtracted in 100 components = 0.620319 Jy
! Clean residual min=-0.014483 max=0.037568 Jy/beam
! Clean residual mean=-0.000015 rms=0.003507 Jy/beam
! Combined flux in latest and established models = 0.620319 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.620319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082817Jy  sigma=2.505464
! Fit after  self-cal, rms=0.082813Jy  sigma=2.505340
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0391657 Jy
! Component: 100  -  total flux cleaned = 0.0575042 Jy
! Total flux subtracted in 100 components = 0.0575042 Jy
! Clean residual min=-0.012170 max=0.013323 Jy/beam
! Clean residual mean=-0.000012 rms=0.002373 Jy/beam
! Combined flux in latest and established models = 0.677823 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.677823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057556Jy  sigma=1.773517
! Fit after  self-cal, rms=0.057527Jy  sigma=1.772806
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9293 mas, bmaj=2.163 mas, bpa=-2.821 degrees
! Estimated noise=0.212222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117592 Jy
! Component: 100  -  total flux cleaned = 0.0180587 Jy
! Component: 150  -  total flux cleaned = 0.0218576 Jy
! Component: 200  -  total flux cleaned = 0.0242028 Jy
! Total flux subtracted in 200 components = 0.0242028 Jy
! Clean residual min=-0.013870 max=0.013384 Jy/beam
! Clean residual mean=-0.000029 rms=0.002849 Jy/beam
! Combined flux in latest and established models = 0.702026 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 19 components and 0.702026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054483Jy  sigma=1.714649
! Fit after  self-cal, rms=0.054478Jy  sigma=1.714586
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9293 x 2.163 at -2.821 degrees (North through East)
! Clean map  min=-0.013453  max=0.66179 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.88     HN        1.01     KP        1.08     
!   LA        0.96     MK        0.98     NL        1.07     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.01     KP        1.07     
!   LA        0.96     MK        0.98     NL        1.08     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.00     KP        1.07     
!   LA        0.95     MK        0.99     NL        1.07     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.01     KP        1.06     
!   LA        0.95     MK        0.99     NL        1.06     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.88     HN        1.01     KP        1.07     
!   LA        0.95     MK        1.00     NL        1.06     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.88     HN        1.00     KP        1.06     
!   LA        0.96     MK        0.99     NL        1.06     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.87     HN        1.01     KP        1.06     
!   LA        0.96     MK        1.00     NL        1.07     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.88     HN        1.01     KP        1.06     
!   LA        0.96     MK        1.00     NL        1.07     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.054478Jy  sigma=1.714586
! Fit after  self-cal, rms=0.031767Jy  sigma=0.971237
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9301 mas, bmaj=2.171 mas, bpa=-2.788 degrees
! Estimated noise=0.212115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.4, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00641034 Jy
! Component: 100  -  total flux cleaned = 0.00686307 Jy
! Component: 150  -  total flux cleaned = 0.00721834 Jy
! Component: 200  -  total flux cleaned = 0.00761771 Jy
! Total flux subtracted in 200 components = 0.00761771 Jy
! Clean residual min=-0.003225 max=0.003788 Jy/beam
! Clean residual mean=-0.000003 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.709643 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 38 components and 0.709643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030156Jy  sigma=0.918983
! Fit after  self-cal, rms=0.030125Jy  sigma=0.917435
! Inverting map 
! Added new window around map position (27.8, 23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319886 Jy
! Component: 100  -  total flux cleaned = 0.0038087 Jy
! Component: 150  -  total flux cleaned = 0.00395492 Jy
! Component: 200  -  total flux cleaned = 0.00416341 Jy
! Total flux subtracted in 200 components = 0.00416341 Jy
! Clean residual min=-0.002994 max=0.003391 Jy/beam
! Clean residual mean=-0.000002 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.713807 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 51 components and 0.713807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029609Jy  sigma=0.900847
! Fit after  self-cal, rms=0.029591Jy  sigma=0.900165
! Inverting map 
! Added new window around map position (4.2, 17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022908 Jy
! Component: 100  -  total flux cleaned = 0.00308808 Jy
! Component: 150  -  total flux cleaned = 0.00359472 Jy
! Component: 200  -  total flux cleaned = 0.00388483 Jy
! Total flux subtracted in 200 components = 0.00388483 Jy
! Clean residual min=-0.002666 max=0.003015 Jy/beam
! Clean residual mean=-0.000003 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.717692 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 67 components and 0.717692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029195Jy  sigma=0.887452
! Fit after  self-cal, rms=0.029181Jy  sigma=0.887015
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029181Jy  sigma=0.887015
! Fit after  self-cal, rms=0.027768Jy  sigma=0.835639
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.93 mas, bmaj=2.169 mas, bpa=-2.759 degrees
! Estimated noise=0.212121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000654095 Jy
! Component: 100  -  total flux cleaned = 0.000772364 Jy
! Component: 150  -  total flux cleaned = 0.000569684 Jy
! Component: 200  -  total flux cleaned = 0.000521449 Jy
! Total flux subtracted in 200 components = 0.000521449 Jy
! Clean residual min=-0.001536 max=0.001899 Jy/beam
! Clean residual mean=-0.000002 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.718213 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.718213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027537Jy  sigma=0.829270
! Fit after  self-cal, rms=0.027535Jy  sigma=0.829172
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.4, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168952 Jy
! Component: 100  -  total flux cleaned = 0.00169322 Jy
! Component: 150  -  total flux cleaned = 0.00161072 Jy
! Component: 200  -  total flux cleaned = 0.00172015 Jy
! Total flux subtracted in 200 components = 0.00172015 Jy
! Clean residual min=-0.001401 max=0.001747 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.719933 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 105 components and 0.719933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027350Jy  sigma=0.824104
! Fit after  self-cal, rms=0.027344Jy  sigma=0.823955
! Inverting map 
! Added new window around map position (5.6, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000894667 Jy
! Component: 100  -  total flux cleaned = 0.00118408 Jy
! Component: 150  -  total flux cleaned = 0.00136554 Jy
! Component: 200  -  total flux cleaned = 0.00153396 Jy
! Total flux subtracted in 200 components = 0.00153396 Jy
! Clean residual min=-0.001296 max=0.001565 Jy/beam
! Clean residual mean=-0.000001 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.721467 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 0.721467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027196Jy  sigma=0.820438
! Fit after  self-cal, rms=0.027191Jy  sigma=0.820316
! Inverting map 
! Added new window around map position (12.8, 24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109202 Jy
! Component: 100  -  total flux cleaned = 0.00164449 Jy
! Component: 150  -  total flux cleaned = 0.00203873 Jy
! Component: 200  -  total flux cleaned = 0.00246562 Jy
! Total flux subtracted in 200 components = 0.00246562 Jy
! Clean residual min=-0.001239 max=0.001217 Jy/beam
! Clean residual mean=-0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.723933 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 142 components and 0.723933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027078Jy  sigma=0.817233
! Fit after  self-cal, rms=0.027077Jy  sigma=0.817159
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027077Jy  sigma=0.817159
! Fit after  self-cal, rms=0.027112Jy  sigma=0.815967
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9298 mas, bmaj=2.168 mas, bpa=-2.738 degrees
! Estimated noise=0.212214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354045 Jy
! Component: 100  -  total flux cleaned = 0.000619116 Jy
! Component: 150  -  total flux cleaned = 0.000890379 Jy
! Component: 200  -  total flux cleaned = 0.000974128 Jy
! Total flux subtracted in 200 components = 0.000974128 Jy
! Clean residual min=-0.001132 max=0.001127 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.724907 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 151 components and 0.724907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027029Jy  sigma=0.814211
! Fit after  self-cal, rms=0.027028Jy  sigma=0.814172
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107671 Jy
! Component: 100  -  total flux cleaned = 0.000186954 Jy
! Component: 150  -  total flux cleaned = 0.000311465 Jy
! Component: 200  -  total flux cleaned = 0.000358844 Jy
! Total flux subtracted in 200 components = 0.000358844 Jy
! Clean residual min=-0.001091 max=0.001070 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.725266 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 159 components and 0.725265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026979Jy  sigma=0.813029
! Fit after  self-cal, rms=0.026978Jy  sigma=0.813018
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026978Jy  sigma=0.813018
! Fit after  self-cal, rms=0.027013Jy  sigma=0.812770
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.045 mas, bmaj=3.123 mas, bpa=-3.382 degrees
! Estimated noise=0.267916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000537767 Jy
! Component: 100  -  total flux cleaned = 0.000598012 Jy
! Component: 150  -  total flux cleaned = 0.00055332 Jy
! Component: 200  -  total flux cleaned = 0.000596773 Jy
! Total flux subtracted in 200 components = 0.000596773 Jy
! Clean residual min=-0.001098 max=0.001389 Jy/beam
! Clean residual mean=-0.000002 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.725862 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 177 components and 0.725862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026981Jy  sigma=0.812054
! Fit after  self-cal, rms=0.026976Jy  sigma=0.811965
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.39409e-05 Jy
! Component: 100  -  total flux cleaned = 5.59188e-05 Jy
! Component: 150  -  total flux cleaned = 0.00011029 Jy
! Component: 200  -  total flux cleaned = 0.000160946 Jy
! Total flux subtracted in 200 components = 0.000160946 Jy
! Clean residual min=-0.001064 max=0.001329 Jy/beam
! Clean residual mean=-0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.726023 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 185 components and 0.726023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026960Jy  sigma=0.811659
! Fit after  self-cal, rms=0.026957Jy  sigma=0.811618
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9296 mas, bmaj=2.168 mas, bpa=-2.726 degrees
! Estimated noise=0.212323 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9296 x 2.168 at -2.726 degrees (North through East)
! Clean map  min=-0.0013682  max=0.66287 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026957Jy  sigma=0.811618
! Fit after  self-cal, rms=0.022370Jy  sigma=0.631042
! Inverting map and beam 
! Estimated beam: bmin=0.9296 mas, bmaj=2.168 mas, bpa=-2.728 degrees
! Estimated noise=0.212245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000160121 Jy
! Component: 100  -  total flux cleaned = -0.00020628 Jy
! Component: 150  -  total flux cleaned = -0.00022809 Jy
! Component: 200  -  total flux cleaned = -0.000305418 Jy
! Total flux subtracted in 200 components = -0.000305418 Jy
! Clean residual min=-0.000878 max=0.000917 Jy/beam
! Clean residual mean=-0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.725718 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 203 components and 0.725718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022331Jy  sigma=0.629841
! Fit after  self-cal, rms=0.022331Jy  sigma=0.629825
! Inverting map 
! Added new window around map position (-6.6, 45.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000633378 Jy
! Component: 100  -  total flux cleaned = 0.000813105 Jy
! Component: 150  -  total flux cleaned = 0.000868213 Jy
! Component: 200  -  total flux cleaned = 0.000868647 Jy
! Total flux subtracted in 200 components = 0.000868647 Jy
! Clean residual min=-0.000849 max=0.000860 Jy/beam
! Clean residual mean=-0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.726586 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 222 components and 0.726586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022289Jy  sigma=0.628613
! Fit after  self-cal, rms=0.022288Jy  sigma=0.628586
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022288Jy  sigma=0.628586
! Fit after  self-cal, rms=0.022288Jy  sigma=0.628527
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7393 mas, bmaj=1.893 mas, bpa=-2.847 degrees
! Estimated noise=0.342105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.508827 Jy
! Component: 100  -  total flux cleaned = 0.621888 Jy
! Component: 150  -  total flux cleaned = 0.661981 Jy
! Component: 200  -  total flux cleaned = 0.68113 Jy
! Total flux subtracted in 200 components = 0.68113 Jy
! Clean residual min=-0.003555 max=0.008642 Jy/beam
! Clean residual mean=-0.000003 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.68113 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.68113 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9295 mas, bmaj=2.168 mas, bpa=-2.726 degrees
! Estimated noise=0.212258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103488 Jy
! Component: 100  -  total flux cleaned = 0.0166924 Jy
! Component: 150  -  total flux cleaned = 0.0211831 Jy
! Component: 200  -  total flux cleaned = 0.0245487 Jy
! Total flux subtracted in 200 components = 0.0245487 Jy
! Clean residual min=-0.001813 max=0.002314 Jy/beam
! Clean residual mean=-0.000004 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.705679 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.705679 Jy
! Inverting map 
! Added new window around map position (7, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270894 Jy
! Component: 100  -  total flux cleaned = 0.00491371 Jy
! Component: 150  -  total flux cleaned = 0.00656868 Jy
! Component: 200  -  total flux cleaned = 0.00790637 Jy
! Total flux subtracted in 200 components = 0.00790637 Jy
! Clean residual min=-0.001574 max=0.001725 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.713585 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 52 components and 0.713585 Jy
! Inverting map 
! Added new window around map position (0.2, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167379 Jy
! Component: 100  -  total flux cleaned = 0.00268223 Jy
! Component: 150  -  total flux cleaned = 0.00364953 Jy
! Component: 200  -  total flux cleaned = 0.00448945 Jy
! Total flux subtracted in 200 components = 0.00448945 Jy
! Clean residual min=-0.001410 max=0.001472 Jy/beam
! Clean residual mean=-0.000002 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.718074 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 75 components and 0.718075 Jy
! Inverting map 
! Added new window around map position (-1.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112967 Jy
! Component: 100  -  total flux cleaned = 0.00160805 Jy
! Component: 150  -  total flux cleaned = 0.00192619 Jy
! Component: 200  -  total flux cleaned = 0.00222562 Jy
! Total flux subtracted in 200 components = 0.00222562 Jy
! Clean residual min=-0.001216 max=0.001035 Jy/beam
! Clean residual mean=-0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.7203 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 98 components and 0.7203 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.045 mas, bmaj=3.123 mas, bpa=-3.367 degrees
! Estimated noise=0.267841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107378 Jy
! Component: 100  -  total flux cleaned = 0.00161638 Jy
! Component: 150  -  total flux cleaned = 0.00202739 Jy
! Component: 200  -  total flux cleaned = 0.00237404 Jy
! Total flux subtracted in 200 components = 0.00237404 Jy
! Clean residual min=-0.001090 max=0.000970 Jy/beam
! Clean residual mean=-0.000002 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.722674 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291191 Jy
! Component: 100  -  total flux cleaned = 0.000540244 Jy
! Component: 150  -  total flux cleaned = 0.000774122 Jy
! Component: 200  -  total flux cleaned = 0.000994112 Jy
! Total flux subtracted in 200 components = 0.000994112 Jy
! Clean residual min=-0.001021 max=0.000897 Jy/beam
! Clean residual mean=-0.000001 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.723669 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 135 components and 0.723669 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9295 mas, bmaj=2.168 mas, bpa=-2.726 degrees
! Estimated noise=0.212258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181629 Jy
! Component: 100  -  total flux cleaned = 0.000118009 Jy
! Component: 150  -  total flux cleaned = 6.16194e-05 Jy
! Component: 200  -  total flux cleaned = 0.00011702 Jy
! Total flux subtracted in 200 components = 0.00011702 Jy
! Clean residual min=-0.000973 max=0.000890 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.723786 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 159 components and 0.723786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022346Jy  sigma=0.630638
! Fit after  self-cal, rms=0.022327Jy  sigma=0.629918
wmodel /J0345+1453_X_map.mod
! wmodel: Unable to open new model file: /J0345+1453_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0345+1453_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9295 x 2.168 at -2.726 degrees (North through East)
! Clean map  min=-0.00088965  max=0.66307 Jy/beam
! Writing clean map to FITS file: .//J0345+1453_X_map.fits
wmodel .//J0345+1453_X_map.mod
! Writing 159 model components to file: .//J0345+1453_X_map.mod
wobs   .//J0345+1453_X_uvs.fits
! Writing UV FITS file: .//J0345+1453_X_uvs.fits
wwins  .//J0345+1453_X_map.win
! wwins: Wrote 11 windows to .//J0345+1453_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.66307 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210129 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.095071 0.095071 0.190142 0.380284 0.760568 1.52114 3.04227 6.08454 12.1691 24.3382 48.6763 97.3527
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.663 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3155.54 
quit
! Quitting program
! Log file .//J0345+1453_X_dfm.log closed on Wed Nov 16 11:48:22 2016