! Started logfile: .//J0009+4001_X_dfm.log on Wed Nov 16 11:43:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0009+4001_X_uvm.fits
! Reading UV FITS file: .//J0009+4001_X_uvm.fits
! AN table 1: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.76214 visibilities/baseline/integration-bin.
! Found source: J0009+4001
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 14816 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0009+4001_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013812Jy  sigma=33.168081
! Fit after  self-cal, rms=0.815440Jy  sigma=26.698948
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7378 mas, bmaj=1.882 mas, bpa=10.39 degrees
! Estimated noise=0.306402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139247 Jy
! Component: 100  -  total flux cleaned = 0.177223 Jy
! Total flux subtracted in 100 components = 0.177223 Jy
! Clean residual min=-0.006156 max=0.015838 Jy/beam
! Clean residual mean=-0.000010 rms=0.001326 Jy/beam
! Combined flux in latest and established models = 0.177223 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.177223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046515Jy  sigma=1.371857
! Fit after  self-cal, rms=0.046487Jy  sigma=1.371249
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01608 Jy
! Component: 100  -  total flux cleaned = 0.0229746 Jy
! Total flux subtracted in 100 components = 0.0229746 Jy
! Clean residual min=-0.004499 max=0.006258 Jy/beam
! Clean residual mean=-0.000004 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.200198 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 7 components and 0.200198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039915Jy  sigma=1.139833
! Fit after  self-cal, rms=0.039912Jy  sigma=1.139700
! Inverting map 
! Added new window around map position (4.8, 6.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557168 Jy
! Component: 100  -  total flux cleaned = 0.00883068 Jy
! Total flux subtracted in 100 components = 0.00883068 Jy
! Clean residual min=-0.004308 max=0.005723 Jy/beam
! Clean residual mean=-0.000004 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.209028 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.209028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038721Jy  sigma=1.095167
! Fit after  self-cal, rms=0.038696Jy  sigma=1.093904
! Inverting map 
! Added new window around map position (1.4, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00531782 Jy
! Component: 100  -  total flux cleaned = 0.0084512 Jy
! Total flux subtracted in 100 components = 0.0084512 Jy
! Clean residual min=-0.004166 max=0.004902 Jy/beam
! Clean residual mean=-0.000003 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.21748 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.21748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037371Jy  sigma=1.044737
! Fit after  self-cal, rms=0.037338Jy  sigma=1.042894
! Inverting map 
! Added new window around map position (3, 3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0043616 Jy
! Component: 100  -  total flux cleaned = 0.00713665 Jy
! Total flux subtracted in 100 components = 0.00713665 Jy
! Clean residual min=-0.003777 max=0.003756 Jy/beam
! Clean residual mean=-0.000003 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.224616 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.224616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036431Jy  sigma=1.010832
! Fit after  self-cal, rms=0.036391Jy  sigma=1.009161
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9282 mas, bmaj=2.129 mas, bpa=7.268 degrees
! Estimated noise=0.181582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00492702 Jy
! Component: 100  -  total flux cleaned = 0.00851422 Jy
! Component: 150  -  total flux cleaned = 0.0113402 Jy
! Component: 200  -  total flux cleaned = 0.013615 Jy
! Total flux subtracted in 200 components = 0.013615 Jy
! Clean residual min=-0.003609 max=0.003654 Jy/beam
! Clean residual mean=-0.000002 rms=0.000857 Jy/beam
! Combined flux in latest and established models = 0.238231 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 69 components and 0.238231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035427Jy  sigma=0.974813
! Fit after  self-cal, rms=0.035353Jy  sigma=0.971714
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9282 x 2.129 at 7.268 degrees (North through East)
! Clean map  min=-0.0032636  max=0.18162 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        1.03     KP        1.07     
!   LA        0.94     MK        1.00     NL        1.03     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.03     KP        1.06     
!   LA        0.95     MK        0.99     NL        1.04     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.02     KP        1.06     
!   LA        0.95     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.03     KP        1.06     
!   LA        0.96     MK        0.99     NL        1.04     OV        0.99     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.05     KP        1.05     
!   LA        0.95     MK        1.02     NL        1.04     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.04     KP        1.07     
!   LA        0.94     MK        1.02     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.03     KP        1.06     
!   LA        0.96     MK        1.02     NL        1.04     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.05     KP        1.07     
!   LA        0.96     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.035353Jy  sigma=0.971714
! Fit after  self-cal, rms=0.033463Jy  sigma=0.906378
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.945 mas, bmaj=2.147 mas, bpa=8.197 degrees
! Estimated noise=0.181531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166385 Jy
! Component: 100  -  total flux cleaned = 0.00233189 Jy
! Component: 150  -  total flux cleaned = 0.00260835 Jy
! Component: 200  -  total flux cleaned = 0.00272381 Jy
! Total flux subtracted in 200 components = 0.00272381 Jy
! Clean residual min=-0.001902 max=0.002310 Jy/beam
! Clean residual mean=0.000004 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.240955 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 81 components and 0.240955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033279Jy  sigma=0.898848
! Fit after  self-cal, rms=0.033259Jy  sigma=0.898139
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033259Jy  sigma=0.898139
! Fit after  self-cal, rms=0.032974Jy  sigma=0.883369
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9431 mas, bmaj=2.146 mas, bpa=8.048 degrees
! Estimated noise=0.181117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133332 Jy
! Component: 100  -  total flux cleaned = 0.000227268 Jy
! Component: 150  -  total flux cleaned = 0.000371437 Jy
! Component: 200  -  total flux cleaned = 0.000524002 Jy
! Total flux subtracted in 200 components = 0.000524002 Jy
! Clean residual min=-0.001332 max=0.002020 Jy/beam
! Clean residual mean=0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.241479 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.241479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032918Jy  sigma=0.881101
! Fit after  self-cal, rms=0.032918Jy  sigma=0.880995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.4, 7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207314 Jy
! Component: 100  -  total flux cleaned = 0.00330617 Jy
! Component: 150  -  total flux cleaned = 0.00415882 Jy
! Component: 200  -  total flux cleaned = 0.00455527 Jy
! Total flux subtracted in 200 components = 0.00455527 Jy
! Clean residual min=-0.001074 max=0.001170 Jy/beam
! Clean residual mean=0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.246034 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 119 components and 0.246034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032772Jy  sigma=0.874735
! Fit after  self-cal, rms=0.032768Jy  sigma=0.874630
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032768Jy  sigma=0.874630
! Fit after  self-cal, rms=0.032712Jy  sigma=0.874301
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9429 mas, bmaj=2.147 mas, bpa=8.042 degrees
! Estimated noise=0.180751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.92242e-05 Jy
! Component: 100  -  total flux cleaned = 0.000111206 Jy
! Component: 150  -  total flux cleaned = 0.000201358 Jy
! Component: 200  -  total flux cleaned = 0.000281699 Jy
! Total flux subtracted in 200 components = 0.000281699 Jy
! Clean residual min=-0.001030 max=0.001048 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.246316 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 133 components and 0.246316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032679Jy  sigma=0.872904
! Fit after  self-cal, rms=0.032678Jy  sigma=0.872860
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.50027e-06 Jy
! Component: 100  -  total flux cleaned = 6.3063e-05 Jy
! Component: 150  -  total flux cleaned = 0.000159015 Jy
! Component: 200  -  total flux cleaned = 0.000262405 Jy
! Total flux subtracted in 200 components = 0.000262405 Jy
! Clean residual min=-0.001010 max=0.001044 Jy/beam
! Clean residual mean=0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.246578 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 140 components and 0.246578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032664Jy  sigma=0.872222
! Fit after  self-cal, rms=0.032664Jy  sigma=0.872198
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032664Jy  sigma=0.872198
! Fit after  self-cal, rms=0.032632Jy  sigma=0.872038
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.886 mas, bpa=7.498 degrees
! Estimated noise=0.225203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464851 Jy
! Component: 100  -  total flux cleaned = 0.000590115 Jy
! Component: 150  -  total flux cleaned = 0.000635165 Jy
! Component: 200  -  total flux cleaned = 0.000703877 Jy
! Total flux subtracted in 200 components = 0.000703877 Jy
! Clean residual min=-0.001739 max=0.001504 Jy/beam
! Clean residual mean=0.000002 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.247282 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 163 components and 0.247282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032624Jy  sigma=0.871672
! Fit after  self-cal, rms=0.032623Jy  sigma=0.871628
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.14293e-05 Jy
! Component: 100  -  total flux cleaned = -2.00413e-05 Jy
! Component: 150  -  total flux cleaned = 4.32537e-05 Jy
! Component: 200  -  total flux cleaned = 7.59795e-05 Jy
! Total flux subtracted in 200 components = 7.59795e-05 Jy
! Clean residual min=-0.001702 max=0.001474 Jy/beam
! Clean residual mean=0.000002 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.247358 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 174 components and 0.247358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032621Jy  sigma=0.871507
! Fit after  self-cal, rms=0.032621Jy  sigma=0.871493
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9428 mas, bmaj=2.148 mas, bpa=8.046 degrees
! Estimated noise=0.18056 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9428 x 2.148 at 8.046 degrees (North through East)
! Clean map  min=-0.00096546  max=0.18134 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7383 mas, bmaj=1.882 mas, bpa=10.64 degrees
! Estimated noise=0.302904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138182 Jy
! Component: 100  -  total flux cleaned = 0.175769 Jy
! Component: 150  -  total flux cleaned = 0.191494 Jy
! Component: 200  -  total flux cleaned = 0.199593 Jy
! Total flux subtracted in 200 components = 0.199593 Jy
! Clean residual min=-0.002927 max=0.004525 Jy/beam
! Clean residual mean=-0.000001 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.199593 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.199593 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9428 mas, bmaj=2.148 mas, bpa=8.046 degrees
! Estimated noise=0.18056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00914637 Jy
! Component: 100  -  total flux cleaned = 0.015586 Jy
! Component: 150  -  total flux cleaned = 0.0204606 Jy
! Component: 200  -  total flux cleaned = 0.0243162 Jy
! Total flux subtracted in 200 components = 0.0243162 Jy
! Clean residual min=-0.001747 max=0.002571 Jy/beam
! Clean residual mean=0.000001 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.223909 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 53 components and 0.223909 Jy
! Inverting map 
! Added new window around map position (3.6, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322408 Jy
! Component: 100  -  total flux cleaned = 0.00585863 Jy
! Component: 150  -  total flux cleaned = 0.00805727 Jy
! Component: 200  -  total flux cleaned = 0.0099147 Jy
! Total flux subtracted in 200 components = 0.0099147 Jy
! Clean residual min=-0.001363 max=0.001310 Jy/beam
! Clean residual mean=0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.233824 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 93 components and 0.233824 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=2.886 mas, bpa=7.498 degrees
! Estimated noise=0.225203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290816 Jy
! Component: 100  -  total flux cleaned = 0.00500101 Jy
! Component: 150  -  total flux cleaned = 0.00662739 Jy
! Component: 200  -  total flux cleaned = 0.00791778 Jy
! Total flux subtracted in 200 components = 0.00791778 Jy
! Clean residual min=-0.001618 max=0.001619 Jy/beam
! Clean residual mean=0.000002 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.241741 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104056 Jy
! Component: 100  -  total flux cleaned = 0.00189106 Jy
! Component: 150  -  total flux cleaned = 0.00259202 Jy
! Component: 200  -  total flux cleaned = 0.00317464 Jy
! Total flux subtracted in 200 components = 0.00317464 Jy
! Clean residual min=-0.001631 max=0.001399 Jy/beam
! Clean residual mean=0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.244916 Jy
! Adding 148 model components to the UV plane model.
! The established model now contains 227 components and 0.244916 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9428 mas, bmaj=2.148 mas, bpa=8.046 degrees
! Estimated noise=0.18056 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539645 Jy
! Component: 100  -  total flux cleaned = 0.000901577 Jy
! Component: 150  -  total flux cleaned = 0.0011897 Jy
! Component: 200  -  total flux cleaned = 0.00132269 Jy
! Total flux subtracted in 200 components = 0.00132269 Jy
! Clean residual min=-0.000964 max=0.000926 Jy/beam
! Clean residual mean=0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.246239 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 245 components and 0.246239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032640Jy  sigma=0.871829
! Fit after  self-cal, rms=0.032635Jy  sigma=0.871618
wmodel /J0009+4001_X_map.mod
! wmodel: Unable to open new model file: /J0009+4001_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0009+4001_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9428 x 2.148 at 8.046 degrees (North through East)
! Clean map  min=-0.00092349  max=0.18152 Jy/beam
! Writing clean map to FITS file: .//J0009+4001_X_map.fits
wmodel .//J0009+4001_X_map.mod
! Writing 245 model components to file: .//J0009+4001_X_map.mod
wobs   .//J0009+4001_X_uvs.fits
! Writing UV FITS file: .//J0009+4001_X_uvs.fits
wwins  .//J0009+4001_X_map.win
! wwins: Wrote 6 windows to .//J0009+4001_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.18152 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000259153 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.428305 0.428305 0.856609 1.71322 3.42644 6.85288 13.7058 27.4115 54.823
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.181 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  700.435 
quit
! Quitting program
! Log file .//J0009+4001_X_dfm.log closed on Wed Nov 16 11:44:01 2016