! Started logfile: .//J0007+5706_X_dfm.log on Wed Nov 16 11:43:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0007+5706_X_uvm.fits
! Reading UV FITS file: .//J0007+5706_X_uvm.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.92963 visibilities/baseline/integration-bin.
! Found source: J0007+5706
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 94 lines of history.
! 
! Reading 20080 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Polarization RR is unavailable.
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0007+5706_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021643Jy  sigma=31.897730
! Fit after  self-cal, rms=0.812020Jy  sigma=25.408627
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8509 mas, bmaj=1.101 mas, bpa=14.12 degrees
! Estimated noise=0.291396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138959 Jy
! Component: 100  -  total flux cleaned = 0.173524 Jy
! Total flux subtracted in 100 components = 0.173524 Jy
! Clean residual min=-0.004732 max=0.012882 Jy/beam
! Clean residual mean=0.000018 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.173524 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.173524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038812Jy  sigma=1.015967
! Fit after  self-cal, rms=0.038787Jy  sigma=1.014974
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129066 Jy
! Component: 100  -  total flux cleaned = 0.019049 Jy
! Total flux subtracted in 100 components = 0.019049 Jy
! Clean residual min=-0.003743 max=0.003255 Jy/beam
! Clean residual mean=0.000009 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.192573 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.192573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032638Jy  sigma=0.795038
! Fit after  self-cal, rms=0.032620Jy  sigma=0.794380
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.132 mas, bmaj=1.545 mas, bpa=25.11 degrees
! Estimated noise=0.165214 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00488522 Jy
! Component: 100  -  total flux cleaned = 0.00704147 Jy
! Component: 150  -  total flux cleaned = 0.00809213 Jy
! Component: 200  -  total flux cleaned = 0.00854173 Jy
! Total flux subtracted in 200 components = 0.00854173 Jy
! Clean residual min=-0.002867 max=0.003676 Jy/beam
! Clean residual mean=0.000024 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.201115 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.201115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031846Jy  sigma=0.773141
! Fit after  self-cal, rms=0.031845Jy  sigma=0.773097
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.132 x 1.545 at 25.11 degrees (North through East)
! Clean map  min=-0.0027613  max=0.18618 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.92     HN        1.02     KP        1.07     
!   LA        0.95     MK        1.00     NL        1.05     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        1.01     KP        1.07     
!   LA        0.96     MK        1.00     NL        1.07     OV        0.98     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.00     KP        1.06     
!   LA        0.95     MK        1.02     NL        1.07     OV        0.99     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.02     KP        1.05     
!   LA        0.95     MK        1.00     NL        1.06     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.01     KP        1.06     
!   LA        0.96     MK        1.02     NL        1.07     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.02     KP        1.06     
!   LA        0.96     MK        1.02     NL        1.05     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.02     KP        1.07     
!   LA        0.97     MK        1.03     NL        1.06     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.02     KP        1.06     
!   LA        0.97     MK        1.02     NL        1.07     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.031845Jy  sigma=0.773097
! Fit after  self-cal, rms=0.029941Jy  sigma=0.689828
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.139 mas, bmaj=1.553 mas, bpa=24.95 degrees
! Estimated noise=0.165579 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000464901 Jy
! Component: 100  -  total flux cleaned = -0.00050543 Jy
! Component: 150  -  total flux cleaned = -0.000553434 Jy
! Component: 200  -  total flux cleaned = -0.00058654 Jy
! Total flux subtracted in 200 components = -0.00058654 Jy
! Clean residual min=-0.000959 max=0.000967 Jy/beam
! Clean residual mean=0.000009 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.200528 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 25 components and 0.200528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029926Jy  sigma=0.689385
! Fit after  self-cal, rms=0.029918Jy  sigma=0.689272
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029918Jy  sigma=0.689272
! Fit after  self-cal, rms=0.029711Jy  sigma=0.680810
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.549 mas, bpa=24.64 degrees
! Estimated noise=0.165525 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.03634e-05 Jy
! Component: 100  -  total flux cleaned = -6.31537e-05 Jy
! Component: 150  -  total flux cleaned = -7.30522e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010148 Jy
! Total flux subtracted in 200 components = -0.00010148 Jy
! Clean residual min=-0.000624 max=0.000612 Jy/beam
! Clean residual mean=0.000002 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.200427 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 27 components and 0.200427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029703Jy  sigma=0.680546
! Fit after  self-cal, rms=0.029705Jy  sigma=0.680522
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.29901e-05 Jy
! Component: 100  -  total flux cleaned = -6.05726e-05 Jy
! Component: 150  -  total flux cleaned = -7.68952e-05 Jy
! Component: 200  -  total flux cleaned = -9.97605e-05 Jy
! Total flux subtracted in 200 components = -9.97605e-05 Jy
! Clean residual min=-0.000625 max=0.000611 Jy/beam
! Clean residual mean=0.000002 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.200327 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 27 components and 0.200327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029700Jy  sigma=0.680367
! Fit after  self-cal, rms=0.029700Jy  sigma=0.680355
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029700Jy  sigma=0.680355
! Fit after  self-cal, rms=0.029706Jy  sigma=0.680275
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.55 mas, bpa=24.68 degrees
! Estimated noise=0.165579 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.72394e-05 Jy
! Component: 100  -  total flux cleaned = 1.54693e-06 Jy
! Component: 150  -  total flux cleaned = -1.28093e-05 Jy
! Component: 200  -  total flux cleaned = -3.31031e-05 Jy
! Total flux subtracted in 200 components = -3.31031e-05 Jy
! Clean residual min=-0.000620 max=0.000612 Jy/beam
! Clean residual mean=0.000002 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.200294 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 27 components and 0.200294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029702Jy  sigma=0.680150
! Fit after  self-cal, rms=0.029702Jy  sigma=0.680143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.42437e-05 Jy
! Component: 100  -  total flux cleaned = -4.30267e-05 Jy
! Component: 150  -  total flux cleaned = -5.44713e-05 Jy
! Component: 200  -  total flux cleaned = -7.09554e-05 Jy
! Total flux subtracted in 200 components = -7.09554e-05 Jy
! Clean residual min=-0.000621 max=0.000613 Jy/beam
! Clean residual mean=0.000002 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.200223 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.200223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029699Jy  sigma=0.680070
! Fit after  self-cal, rms=0.029699Jy  sigma=0.680064
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029699Jy  sigma=0.680064
! Fit after  self-cal, rms=0.029703Jy  sigma=0.679995
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=2.646 mas, bpa=30.52 degrees
! Estimated noise=0.200243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.70509e-05 Jy
! Component: 100  -  total flux cleaned = 1.66214e-05 Jy
! Component: 150  -  total flux cleaned = 1.63941e-05 Jy
! Component: 200  -  total flux cleaned = 1.49277e-05 Jy
! Total flux subtracted in 200 components = 1.49277e-05 Jy
! Clean residual min=-0.000607 max=0.000643 Jy/beam
! Clean residual mean=0.000005 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.200238 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 28 components and 0.200238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029703Jy  sigma=0.680008
! Fit after  self-cal, rms=0.029703Jy  sigma=0.679995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.21224e-07 Jy
! Component: 100  -  total flux cleaned = -4.29328e-07 Jy
! Component: 150  -  total flux cleaned = -1.93019e-06 Jy
! Component: 200  -  total flux cleaned = -3.18037e-06 Jy
! Total flux subtracted in 200 components = -3.18037e-06 Jy
! Clean residual min=-0.000608 max=0.000639 Jy/beam
! Clean residual mean=0.000005 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.200235 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 28 components and 0.200235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029703Jy  sigma=0.680005
! Fit after  self-cal, rms=0.029703Jy  sigma=0.679996
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.55 mas, bpa=24.72 degrees
! Estimated noise=0.165615 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.138 x 1.55 at 24.72 degrees (North through East)
! Clean map  min=-0.0005721  max=0.18682 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.85 mas, bmaj=1.1 mas, bpa=14.09 degrees
! Estimated noise=0.294644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13987 Jy
! Component: 100  -  total flux cleaned = 0.174902 Jy
! Component: 150  -  total flux cleaned = 0.187926 Jy
! Component: 200  -  total flux cleaned = 0.194253 Jy
! Total flux subtracted in 200 components = 0.194253 Jy
! Clean residual min=-0.001781 max=0.002973 Jy/beam
! Clean residual mean=0.000003 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.194253 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.194253 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.55 mas, bpa=24.72 degrees
! Estimated noise=0.165615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00378299 Jy
! Component: 100  -  total flux cleaned = 0.00534652 Jy
! Component: 150  -  total flux cleaned = 0.00577896 Jy
! Component: 200  -  total flux cleaned = 0.00591068 Jy
! Total flux subtracted in 200 components = 0.00591068 Jy
! Clean residual min=-0.000651 max=0.000630 Jy/beam
! Clean residual mean=0.000002 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.200164 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.200164 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=2.646 mas, bpa=30.52 degrees
! Estimated noise=0.200243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174097 Jy
! Component: 100  -  total flux cleaned = 0.000159783 Jy
! Component: 150  -  total flux cleaned = 0.000150264 Jy
! Component: 200  -  total flux cleaned = 0.000143437 Jy
! Total flux subtracted in 200 components = 0.000143437 Jy
! Clean residual min=-0.000607 max=0.000645 Jy/beam
! Clean residual mean=0.000004 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.200307 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.79993e-06 Jy
! Component: 100  -  total flux cleaned = -5.41314e-06 Jy
! Component: 150  -  total flux cleaned = -9.83235e-06 Jy
! Component: 200  -  total flux cleaned = -1.18902e-05 Jy
! Total flux subtracted in 200 components = -1.18902e-05 Jy
! Clean residual min=-0.000607 max=0.000643 Jy/beam
! Clean residual mean=0.000004 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.200295 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 19 components and 0.200295 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.55 mas, bpa=24.72 degrees
! Estimated noise=0.165615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.54716e-05 Jy
! Component: 100  -  total flux cleaned = 6.33586e-05 Jy
! Component: 150  -  total flux cleaned = 5.20802e-05 Jy
! Component: 200  -  total flux cleaned = 4.10015e-05 Jy
! Total flux subtracted in 200 components = 4.10015e-05 Jy
! Clean residual min=-0.000622 max=0.000618 Jy/beam
! Clean residual mean=0.000002 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.200336 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 21 components and 0.200336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029719Jy  sigma=0.680545
! Fit after  self-cal, rms=0.029718Jy  sigma=0.680526
wmodel /J0007+5706_X_map.mod
! wmodel: Unable to open new model file: /J0007+5706_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J0007+5706_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.138 x 1.55 at 24.72 degrees (North through East)
! Clean map  min=-0.00057233  max=0.18674 Jy/beam
! Writing clean map to FITS file: .//J0007+5706_X_map.fits
wmodel .//J0007+5706_X_map.mod
! Writing 21 model components to file: .//J0007+5706_X_map.mod
wobs   .//J0007+5706_X_uvs.fits
! Writing UV FITS file: .//J0007+5706_X_uvs.fits
wwins  .//J0007+5706_X_map.win
! wwins: Wrote 1 windows to .//J0007+5706_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.186736 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000141427 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.227209 0.227209 0.454418 0.908836 1.81767 3.63534 7.27069 14.5414 29.0828 58.1655
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.186 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1320.37 
quit
! Quitting program
! Log file .//J0007+5706_X_dfm.log closed on Wed Nov 16 11:43:47 2016