! Started logfile: /scr/pima/s5272d_uvs/J1616+4632_X_uvs.log on Sat Jan  4 15:15:18 2014
obs /scr/pima/s5272d_uvs/J1616+4632_X_uva.fits
! Reading UV FITS file: /scr/pima/s5272d_uvs/J1616+4632_X_uva.fits
! AN table 1: 5 integrations on 15 of 15 possible baselines.
! AN table 2: 14 integrations on 28 of 28 possible baselines.
! AN table 3: 5 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.903846 visibilities/baseline/integration-bin.
! Found source: J1616+4632
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR LL RL LR
! 
! Read 0 lines of history.
! 
! Reading 16544 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/s5272d_uvs/J1616+4632_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.006151Jy  sigma=4.944115
! Fit after  self-cal, rms=0.858321Jy  sigma=4.180585
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8207 mas, bmaj=1.188 mas, bpa=29.59 degrees
! Estimated noise=3.52179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113425 Jy
! Component: 100  -  total flux cleaned = 0.138159 Jy
! Total flux subtracted in 100 components = 0.138159 Jy
! Clean residual min=-0.004794 max=0.006898 Jy/beam
! Clean residual mean=0.000003 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 0.138159 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.138159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032796Jy  sigma=0.182059
! Fit after  self-cal, rms=0.032782Jy  sigma=0.182036
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00429229 Jy
! Component: 100  -  total flux cleaned = 0.00444984 Jy
! Total flux subtracted in 100 components = 0.00444984 Jy
! Clean residual min=-0.005192 max=0.004979 Jy/beam
! Clean residual mean=0.000003 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.142609 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.142609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032560Jy  sigma=0.176040
! Fit after  self-cal, rms=0.032549Jy  sigma=0.176013
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=1.495 mas, bpa=26.62 degrees
! Estimated noise=2.39313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242898 Jy
! Component: 100  -  total flux cleaned = 0.00373102 Jy
! Component: 150  -  total flux cleaned = 0.00441191 Jy
! Component: 200  -  total flux cleaned = 0.00447703 Jy
! Total flux subtracted in 200 components = 0.00447703 Jy
! Clean residual min=-0.004660 max=0.005133 Jy/beam
! Clean residual mean=0.000031 rms=0.001086 Jy/beam
! Combined flux in latest and established models = 0.147086 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.147086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032623Jy  sigma=0.174186
! Fit after  self-cal, rms=0.032624Jy  sigma=0.174169
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.049 x 1.495 at 26.62 degrees (North through East)
! Clean map  min=-0.0043775  max=0.14578 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     LA        0.92     NL        1.09     OV        0.90     
!   PT        0.92     SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     HN        0.89     LA        0.89     MK        1.05     
!   NL        1.09     OV        0.88     PT        0.97     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.18     HN        0.97     LA        0.93     MK        0.96     
!   NL        1.09     OV        0.89     PT        1.19     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     LA        0.90     NL        1.10     OV        0.93     
!   PT        0.93     SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        0.93     LA        0.93     MK        1.02     
!   NL        1.07     OV        0.92     PT        0.99     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     HN        1.01     LA        0.92     MK        1.01     
!   NL        1.10     OV        0.92     PT        1.18     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     LA        0.94     NL        1.07     OV        0.92     
!   PT        0.97     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     HN        0.91     LA        0.92     MK        1.13     
!   NL        1.08     OV        0.92     PT        1.09     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     LA        0.91     NL        1.03     OV        0.93     
!   PT        0.95     SC        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     HN        0.97     LA        0.94     MK        0.94     
!   NL        1.04     OV        0.89     PT        1.03     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     LA        0.97     NL        1.11     OV        0.97     
!   PT        0.94     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     HN        1.08     LA        0.98     MK        0.99     
!   NL        1.10     OV        0.92     PT        0.98     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     LA        0.88     NL        1.10     OV        0.97     
!   PT        0.95     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.12     HN        1.06     LA        0.90     MK        1.07     
!   NL        1.12     OV        0.91     PT        0.90     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.15     HN        1.05     LA        0.96     MK        0.92     
!   NL        1.10     OV        0.98     PT        1.20     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     LA        0.89     NL        1.09     OV        1.01     
!   PT        0.87     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.12     HN        0.97     LA        0.91     MK        1.02     
!   NL        1.04     OV        0.97     PT        0.96     SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.20     HN        1.05     LA        0.84     MK        0.95     
!   NL        1.11     OV        1.01     PT        1.10     
! 
! 
! Fit before self-cal, rms=0.032624Jy  sigma=0.174169
! Fit after  self-cal, rms=0.029619Jy  sigma=0.158114
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=1.503 mas, bpa=26.81 degrees
! Estimated noise=2.35037 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00221367 Jy
! Component: 100  -  total flux cleaned = -0.00310416 Jy
! Component: 150  -  total flux cleaned = -0.00322252 Jy
! Component: 200  -  total flux cleaned = -0.00326042 Jy
! Total flux subtracted in 200 components = -0.00326042 Jy
! Clean residual min=-0.003086 max=0.002948 Jy/beam
! Clean residual mean=0.000021 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.143825 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 27 components and 0.143825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029271Jy  sigma=0.158101
! Fit after  self-cal, rms=0.029336Jy  sigma=0.158043
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029336Jy  sigma=0.158043
! Fit after  self-cal, rms=0.029087Jy  sigma=0.153824
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.504 mas, bpa=26.7 degrees
! Estimated noise=2.33367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134495 Jy
! Component: 100  -  total flux cleaned = -0.00202072 Jy
! Component: 150  -  total flux cleaned = -0.00235177 Jy
! Component: 200  -  total flux cleaned = -0.00237573 Jy
! Total flux subtracted in 200 components = -0.00237573 Jy
! Clean residual min=-0.002263 max=0.002435 Jy/beam
! Clean residual mean=0.000005 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.141449 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 30 components and 0.141449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028963Jy  sigma=0.153823
! Fit after  self-cal, rms=0.028977Jy  sigma=0.153796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.7689e-05 Jy
! Component: 100  -  total flux cleaned = -6.05005e-05 Jy
! Component: 150  -  total flux cleaned = -6.03523e-05 Jy
! Component: 200  -  total flux cleaned = -7.10843e-05 Jy
! Total flux subtracted in 200 components = -7.10843e-05 Jy
! Clean residual min=-0.002251 max=0.002429 Jy/beam
! Clean residual mean=0.000005 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.141378 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 30 components and 0.141378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028965Jy  sigma=0.153763
! Fit after  self-cal, rms=0.028966Jy  sigma=0.153759
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028966Jy  sigma=0.153759
! Fit after  self-cal, rms=0.029286Jy  sigma=0.153728
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=1.506 mas, bpa=26.7 degrees
! Estimated noise=2.32311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000874068 Jy
! Component: 100  -  total flux cleaned = -0.00131772 Jy
! Component: 150  -  total flux cleaned = -0.00146594 Jy
! Component: 200  -  total flux cleaned = -0.00149419 Jy
! Total flux subtracted in 200 components = -0.00149419 Jy
! Clean residual min=-0.002186 max=0.002421 Jy/beam
! Clean residual mean=0.000003 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.139884 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 32 components and 0.139884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029220Jy  sigma=0.153778
! Fit after  self-cal, rms=0.029226Jy  sigma=0.153769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.84244e-05 Jy
! Component: 100  -  total flux cleaned = -3.86485e-05 Jy
! Component: 150  -  total flux cleaned = -4.85909e-05 Jy
! Component: 200  -  total flux cleaned = -4.84934e-05 Jy
! Total flux subtracted in 200 components = -4.84934e-05 Jy
! Clean residual min=-0.002175 max=0.002416 Jy/beam
! Clean residual mean=0.000003 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.139836 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.139836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029218Jy  sigma=0.153748
! Fit after  self-cal, rms=0.029220Jy  sigma=0.153745
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029220Jy  sigma=0.153745
! Fit after  self-cal, rms=0.029190Jy  sigma=0.153663
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.144 mas, bmaj=2.802 mas, bpa=37.29 degrees
! Estimated noise=2.80836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000987278 Jy
! Component: 100  -  total flux cleaned = -0.00136895 Jy
! Component: 150  -  total flux cleaned = -0.00144877 Jy
! Component: 200  -  total flux cleaned = -0.00146823 Jy
! Total flux subtracted in 200 components = -0.00146823 Jy
! Clean residual min=-0.002532 max=0.003514 Jy/beam
! Clean residual mean=0.000008 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.138368 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.138368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029163Jy  sigma=0.153727
! Fit after  self-cal, rms=0.029162Jy  sigma=0.153720
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.47641e-05 Jy
! Component: 100  -  total flux cleaned = -2.67443e-05 Jy
! Component: 150  -  total flux cleaned = -3.85314e-05 Jy
! Component: 200  -  total flux cleaned = -5.00864e-05 Jy
! Total flux subtracted in 200 components = -5.00864e-05 Jy
! Clean residual min=-0.002535 max=0.003497 Jy/beam
! Clean residual mean=0.000008 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.138317 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 40 components and 0.138317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029172Jy  sigma=0.153695
! Fit after  self-cal, rms=0.029172Jy  sigma=0.153694
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.508 mas, bpa=26.71 degrees
! Estimated noise=2.31591 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.06 x 1.508 at 26.71 degrees (North through East)
! Clean map  min=-0.0020659  max=0.14185 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8253 mas, bmaj=1.191 mas, bpa=29.53 degrees
! Estimated noise=3.45359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111198 Jy
! Component: 100  -  total flux cleaned = 0.135447 Jy
! Component: 150  -  total flux cleaned = 0.139473 Jy
! Component: 200  -  total flux cleaned = 0.139467 Jy
! Total flux subtracted in 200 components = 0.139467 Jy
! Clean residual min=-0.002615 max=0.003433 Jy/beam
! Clean residual mean=-0.000000 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.139467 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.139467 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.508 mas, bpa=26.71 degrees
! Estimated noise=2.31591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.4, -14.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218015 Jy
! Component: 100  -  total flux cleaned = 0.0027971 Jy
! Component: 150  -  total flux cleaned = 0.00300999 Jy
! Component: 200  -  total flux cleaned = 0.00312737 Jy
! Total flux subtracted in 200 components = 0.00312737 Jy
! Clean residual min=-0.002091 max=0.002408 Jy/beam
! Clean residual mean=0.000001 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.142594 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 28 components and 0.142594 Jy
! Inverting map 
! Added new window around map position (0.6, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160204 Jy
! Component: 100  -  total flux cleaned = 0.00189328 Jy
! Component: 150  -  total flux cleaned = 0.00193587 Jy
! Component: 200  -  total flux cleaned = 0.00204978 Jy
! Total flux subtracted in 200 components = 0.00204978 Jy
! Clean residual min=-0.001968 max=0.002348 Jy/beam
! Clean residual mean=-0.000001 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.144644 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 44 components and 0.144644 Jy
! Inverting map 
! Added new window around map position (21.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00236097 Jy
! Component: 100  -  total flux cleaned = 0.00336673 Jy
! Component: 150  -  total flux cleaned = 0.00392345 Jy
! Component: 200  -  total flux cleaned = 0.00417516 Jy
! Total flux subtracted in 200 components = 0.00417516 Jy
! Clean residual min=-0.001864 max=0.002273 Jy/beam
! Clean residual mean=0.000002 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.148819 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 61 components and 0.148819 Jy
! Inverting map 
! Added new window around map position (-8, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130874 Jy
! Component: 100  -  total flux cleaned = 0.0013058 Jy
! Component: 150  -  total flux cleaned = 0.00150526 Jy
! Component: 200  -  total flux cleaned = 0.00185497 Jy
! Total flux subtracted in 200 components = 0.00185497 Jy
! Clean residual min=-0.001805 max=0.002116 Jy/beam
! Clean residual mean=0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.150674 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 75 components and 0.150674 Jy
! Inverting map 
! Added new window around map position (-32.4, -41.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182426 Jy
! Component: 100  -  total flux cleaned = 0.00279484 Jy
! Component: 150  -  total flux cleaned = 0.00317119 Jy
! Component: 200  -  total flux cleaned = 0.00339602 Jy
! Total flux subtracted in 200 components = 0.00339602 Jy
! Clean residual min=-0.001717 max=0.001925 Jy/beam
! Clean residual mean=-0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.15407 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 90 components and 0.15407 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.144 mas, bmaj=2.802 mas, bpa=37.29 degrees
! Estimated noise=2.80836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000611002 Jy
! Component: 100  -  total flux cleaned = 0.00071223 Jy
! Component: 150  -  total flux cleaned = 0.000895148 Jy
! Component: 200  -  total flux cleaned = 0.00112344 Jy
! Total flux subtracted in 200 components = 0.00112344 Jy
! Clean residual min=-0.001783 max=0.002093 Jy/beam
! Clean residual mean=-0.000007 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.155194 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214654 Jy
! Component: 100  -  total flux cleaned = 0.000366679 Jy
! Component: 150  -  total flux cleaned = 0.000487094 Jy
! Component: 200  -  total flux cleaned = 0.000579857 Jy
! Total flux subtracted in 200 components = 0.000579857 Jy
! Clean residual min=-0.001757 max=0.002018 Jy/beam
! Clean residual mean=-0.000007 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.155773 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 122 components and 0.155773 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.508 mas, bpa=26.71 degrees
! Estimated noise=2.31591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000474541 Jy
! Component: 100  -  total flux cleaned = -0.000447065 Jy
! Component: 150  -  total flux cleaned = -0.000338938 Jy
! Component: 200  -  total flux cleaned = -0.000209747 Jy
! Total flux subtracted in 200 components = -0.000209747 Jy
! Clean residual min=-0.001712 max=0.001829 Jy/beam
! Clean residual mean=-0.000003 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.155564 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 142 components and 0.155564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028276Jy  sigma=0.149341
! Fit after  self-cal, rms=0.028221Jy  sigma=0.148979
wmodel /scr/pima/s5272d_uvs/J1616+4632_X_map.mod
! Writing 142 model components to file: /scr/pima/s5272d_uvs/J1616+4632_X_map.mod
wobs /scr/pima/s5272d_uvs/J1616+4632_X_uvs.fits
! Writing UV FITS file: /scr/pima/s5272d_uvs/J1616+4632_X_uvs.fits
wwins /scr/pima/s5272d_uvs/J1616+4632_X_map.win
! wwins: Wrote 6 windows to /scr/pima/s5272d_uvs/J1616+4632_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229683 Jy
! Component: 100  -  total flux cleaned = 0.00044126 Jy
! Component: 150  -  total flux cleaned = 0.000761459 Jy
! Component: 200  -  total flux cleaned = 0.000988047 Jy
! Component: 250  -  total flux cleaned = 0.00112609 Jy
! Component: 300  -  total flux cleaned = 0.00120672 Jy
! Component: 350  -  total flux cleaned = 0.00131239 Jy
! Component: 400  -  total flux cleaned = 0.00141613 Jy
! Component: 450  -  total flux cleaned = 0.0015178 Jy
! Component: 500  -  total flux cleaned = 0.00146793 Jy
! Component: 550  -  total flux cleaned = 0.00164075 Jy
! Component: 600  -  total flux cleaned = 0.00171332 Jy
! Component: 650  -  total flux cleaned = 0.0016894 Jy
! Component: 700  -  total flux cleaned = 0.00168986 Jy
! Component: 750  -  total flux cleaned = 0.00176027 Jy
! Component: 800  -  total flux cleaned = 0.00182934 Jy
! Component: 850  -  total flux cleaned = 0.00187468 Jy
! Component: 900  -  total flux cleaned = 0.00185221 Jy
! Component: 950  -  total flux cleaned = 0.0018967 Jy
! Component: 1000  -  total flux cleaned = 0.00194058 Jy
! Component: 1050  -  total flux cleaned = 0.0019624 Jy
! Component: 1100  -  total flux cleaned = 0.0019838 Jy
! Component: 1150  -  total flux cleaned = 0.00206806 Jy
! Component: 1200  -  total flux cleaned = 0.00204673 Jy
! Component: 1250  -  total flux cleaned = 0.00208784 Jy
! Component: 1300  -  total flux cleaned = 0.0020472 Jy
! Component: 1350  -  total flux cleaned = 0.00208767 Jy
! Component: 1400  -  total flux cleaned = 0.00206757 Jy
! Component: 1450  -  total flux cleaned = 0.00212693 Jy
! Component: 1500  -  total flux cleaned = 0.00212719 Jy
! Component: 1550  -  total flux cleaned = 0.00216563 Jy
! Component: 1600  -  total flux cleaned = 0.00220384 Jy
! Component: 1650  -  total flux cleaned = 0.0022417 Jy
! Component: 1700  -  total flux cleaned = 0.00224205 Jy
! Component: 1750  -  total flux cleaned = 0.00224202 Jy
! Component: 1800  -  total flux cleaned = 0.00231629 Jy
! Component: 1850  -  total flux cleaned = 0.00237137 Jy
! Component: 1900  -  total flux cleaned = 0.00248075 Jy
! Component: 1950  -  total flux cleaned = 0.0025531 Jy
! Component: 2000  -  total flux cleaned = 0.00257102 Jy
! Component: 2050  -  total flux cleaned = 0.00269561 Jy
! Component: 2100  -  total flux cleaned = 0.00271314 Jy
! Component: 2150  -  total flux cleaned = 0.00280048 Jy
! Component: 2200  -  total flux cleaned = 0.00283531 Jy
! Component: 2250  -  total flux cleaned = 0.00290414 Jy
! Component: 2300  -  total flux cleaned = 0.00295534 Jy
! Component: 2350  -  total flux cleaned = 0.00302303 Jy
! Component: 2400  -  total flux cleaned = 0.00312371 Jy
! Component: 2450  -  total flux cleaned = 0.00312369 Jy
! Component: 2500  -  total flux cleaned = 0.00327274 Jy
! Component: 2550  -  total flux cleaned = 0.00332194 Jy
! Component: 2600  -  total flux cleaned = 0.00338702 Jy
! Component: 2650  -  total flux cleaned = 0.00345162 Jy
! Component: 2700  -  total flux cleaned = 0.00353202 Jy
! Component: 2750  -  total flux cleaned = 0.00354777 Jy
! Component: 2800  -  total flux cleaned = 0.00359526 Jy
! Component: 2850  -  total flux cleaned = 0.00368952 Jy
! Component: 2900  -  total flux cleaned = 0.00373639 Jy
! Component: 2950  -  total flux cleaned = 0.00376729 Jy
! Component: 3000  -  total flux cleaned = 0.00375191 Jy
! Component: 3050  -  total flux cleaned = 0.0037827 Jy
! Component: 3100  -  total flux cleaned = 0.00388926 Jy
! Component: 3150  -  total flux cleaned = 0.0039498 Jy
! Component: 3200  -  total flux cleaned = 0.00388974 Jy
! Component: 3250  -  total flux cleaned = 0.00390469 Jy
! Component: 3300  -  total flux cleaned = 0.00396396 Jy
! Component: 3350  -  total flux cleaned = 0.00391961 Jy
! Component: 3400  -  total flux cleaned = 0.00396365 Jy
! Component: 3450  -  total flux cleaned = 0.00390536 Jy
! Component: 3500  -  total flux cleaned = 0.00390537 Jy
! Component: 3550  -  total flux cleaned = 0.00391992 Jy
! Component: 3600  -  total flux cleaned = 0.00393415 Jy
! Component: 3650  -  total flux cleaned = 0.00394835 Jy
! Component: 3700  -  total flux cleaned = 0.00390601 Jy
! Component: 3750  -  total flux cleaned = 0.00390598 Jy
! Component: 3800  -  total flux cleaned = 0.00390591 Jy
! Component: 3850  -  total flux cleaned = 0.00389206 Jy
! Component: 3900  -  total flux cleaned = 0.00390589 Jy
! Component: 3950  -  total flux cleaned = 0.00387847 Jy
! Component: 4000  -  total flux cleaned = 0.00381017 Jy
! Component: 4050  -  total flux cleaned = 0.00383734 Jy
! Total flux subtracted in 4096 components = 0.00382384 Jy
! Clean residual min=-0.000748 max=0.000703 Jy/beam
! Clean residual mean=-0.000002 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.159388 Jy
keep
! Adding 348 model components to the UV plane model.
! The established model now contains 490 components and 0.159387 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s5272d_uvs/J1616+4632_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.06 x 1.508 at 26.71 degrees (North through East)
! Clean map  min=-0.0013755  max=0.14043 Jy/beam
! Writing clean map to FITS file: /scr/pima/s5272d_uvs/J1616+4632_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.140434 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000242213 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.517423 0.517423 1.03485 2.06969 4.13938 8.27877 16.5575 33.1151 66.2301
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  579.796 
quit
! Quitting program
! Log file /scr/pima/s5272d_uvs/J1616+4632_X_uvs.log closed on Sat Jan  4 15:15:22 2014