! Started logfile: /scr/pima/s5272c_uvs/J2038+5119_X_uvs.log on Wed Jan  1 14:24:06 2014
obs /scr/pima/s5272c_uvs/J2038+5119_X_uva.fits
! Reading UV FITS file: /scr/pima/s5272c_uvs/J2038+5119_X_uva.fits
! AN table 1: 6 integrations on 28 of 28 possible baselines.
! AN table 2: 16 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.988095 visibilities/baseline/integration-bin.
! Found source: J2038+5119
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR LL RL LR
! 
! Read 0 lines of history.
! 
! Reading 15936 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/s5272c_uvs/J2038+5119_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=2.749820Jy  sigma=219.789583
! Fit after  self-cal, rms=1.573310Jy  sigma=129.783285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.693 mas, bmaj=2.312 mas, bpa=-70.71 degrees
! Estimated noise=0.288388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84216 Jy
! Component: 100  -  total flux cleaned = 2.29499 Jy
! Total flux subtracted in 100 components = 2.29499 Jy
! Clean residual min=-0.117617 max=0.197191 Jy/beam
! Clean residual mean=0.000002 rms=0.020548 Jy/beam
! Combined flux in latest and established models = 2.29499 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 2.29499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.507329Jy  sigma=43.215053
! Fit after  self-cal, rms=0.506594Jy  sigma=43.178976
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.22743 Jy
! Component: 100  -  total flux cleaned = 0.360834 Jy
! Total flux subtracted in 100 components = 0.360834 Jy
! Clean residual min=-0.066945 max=0.080248 Jy/beam
! Clean residual mean=0.000013 rms=0.013186 Jy/beam
! Combined flux in latest and established models = 2.65582 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 2.65582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.350243Jy  sigma=28.399149
! Fit after  self-cal, rms=0.348187Jy  sigma=28.296301
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0907811 Jy
! Component: 100  -  total flux cleaned = 0.152878 Jy
! Total flux subtracted in 100 components = 0.152878 Jy
! Clean residual min=-0.058536 max=0.071944 Jy/beam
! Clean residual mean=0.000014 rms=0.011328 Jy/beam
! Combined flux in latest and established models = 2.8087 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 2.8087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.315502Jy  sigma=24.639280
! Fit after  self-cal, rms=0.315463Jy  sigma=24.620471
! Inverting map 
! Added new window around map position (3, 7.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0657142 Jy
! Component: 100  -  total flux cleaned = 0.109955 Jy
! Total flux subtracted in 100 components = 0.109955 Jy
! Clean residual min=-0.054076 max=0.056784 Jy/beam
! Clean residual mean=0.000014 rms=0.010334 Jy/beam
! Combined flux in latest and established models = 2.91866 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 2.91866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.299348Jy  sigma=23.132262
! Fit after  self-cal, rms=0.299027Jy  sigma=23.067282
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9108 mas, bmaj=2.614 mas, bpa=-71.45 degrees
! Estimated noise=0.184115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0577495 Jy
! Component: 100  -  total flux cleaned = 0.0992039 Jy
! Component: 150  -  total flux cleaned = 0.13099 Jy
! Component: 200  -  total flux cleaned = 0.156033 Jy
! Total flux subtracted in 200 components = 0.156033 Jy
! Clean residual min=-0.076559 max=0.079620 Jy/beam
! Clean residual mean=0.000010 rms=0.013217 Jy/beam
! Combined flux in latest and established models = 3.07469 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 48 components and 3.07469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.288119Jy  sigma=21.526335
! Fit after  self-cal, rms=0.288184Jy  sigma=21.519128
! Inverting map 
! Added new window around map position (-4.4, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0760797 Jy
! Component: 100  -  total flux cleaned = 0.124553 Jy
! Component: 150  -  total flux cleaned = 0.160898 Jy
! Component: 200  -  total flux cleaned = 0.190257 Jy
! Total flux subtracted in 200 components = 0.190257 Jy
! Clean residual min=-0.058764 max=0.043913 Jy/beam
! Clean residual mean=0.000007 rms=0.009674 Jy/beam
! Combined flux in latest and established models = 3.26495 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 92 components and 3.26495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.267075Jy  sigma=19.190515
! Fit after  self-cal, rms=0.265254Jy  sigma=19.040607
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9108 x 2.614 at -71.45 degrees (North through East)
! Clean map  min=-0.053169  max=2.5147 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     HN        0.89     KP        1.00*    LA        0.93     
!   MK        1.02     NL        1.00     OV        0.91     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.16     HN        0.93     KP        1.00*    LA        0.95     
!   MK        1.00     NL        1.04     OV        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     HN        0.93     KP        1.00*    LA        0.92     
!   MK        1.06     NL        0.99     OV        0.96     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     HN        0.98     KP        1.00*    LA        0.92     
!   MK        1.06     NL        1.03     OV        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.97     KP        1.00*    LA        0.95     
!   MK        1.08     NL        0.96     OV        0.96     SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     HN        1.02     KP        1.00*    LA        0.96     
!   MK        1.08     NL        1.01     OV        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.95     KP        1.00*    LA        0.95     
!   MK        0.98     NL        0.92     OV        0.93     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     HN        1.00     KP        1.00*    LA        0.97     
!   MK        0.96     NL        0.97     OV        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.03     KP        1.00*    LA        1.00     
!   MK        1.00     NL        0.96     OV        0.99     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     HN        1.10     KP        1.00*    LA        1.02     
!   MK        0.99     NL        1.02     OV        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.98     KP        1.00*    LA        0.91     
!   MK        1.00     NL        0.98     OV        1.00     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     HN        1.03     KP        1.00*    LA        0.93     
!   MK        0.98     NL        1.04     OV        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     HN        0.98     KP        1.00*    LA        0.87     
!   MK        0.99     NL        0.95     OV        1.00     SC        1.14     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     HN        1.03     KP        1.00*    LA        0.88     
!   MK        0.97     NL        1.01     OV        1.02     
! 
! 
! Fit before self-cal, rms=0.265254Jy  sigma=19.040607
! Fit after  self-cal, rms=0.189373Jy  sigma=11.419480
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9145 mas, bmaj=2.624 mas, bpa=-71.4 degrees
! Estimated noise=0.182279 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667512 Jy
! Component: 100  -  total flux cleaned = 0.00967352 Jy
! Component: 150  -  total flux cleaned = 0.0152222 Jy
! Component: 200  -  total flux cleaned = 0.020639 Jy
! Total flux subtracted in 200 components = 0.020639 Jy
! Clean residual min=-0.022693 max=0.020165 Jy/beam
! Clean residual mean=-0.000004 rms=0.004855 Jy/beam
! Combined flux in latest and established models = 3.28559 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 3.28559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.183573Jy  sigma=10.981672
! Fit after  self-cal, rms=0.183341Jy  sigma=10.961225
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.183341Jy  sigma=10.961225
! Fit after  self-cal, rms=0.168555Jy  sigma=9.355855
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9139 mas, bmaj=2.62 mas, bpa=-71.41 degrees
! Estimated noise=0.18236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00392739 Jy
! Component: 100  -  total flux cleaned = 0.00553133 Jy
! Component: 150  -  total flux cleaned = 0.00847445 Jy
! Component: 200  -  total flux cleaned = 0.010701 Jy
! Total flux subtracted in 200 components = 0.010701 Jy
! Clean residual min=-0.018720 max=0.018779 Jy/beam
! Clean residual mean=-0.000005 rms=0.004180 Jy/beam
! Combined flux in latest and established models = 3.29629 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 126 components and 3.29629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.166089Jy  sigma=9.067814
! Fit after  self-cal, rms=0.165984Jy  sigma=9.051448
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419745 Jy
! Component: 100  -  total flux cleaned = 0.00827016 Jy
! Component: 150  -  total flux cleaned = 0.0111185 Jy
! Component: 200  -  total flux cleaned = 0.0138141 Jy
! Total flux subtracted in 200 components = 0.0138141 Jy
! Clean residual min=-0.017179 max=0.017625 Jy/beam
! Clean residual mean=-0.000005 rms=0.003996 Jy/beam
! Combined flux in latest and established models = 3.3101 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 139 components and 3.3101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.164778Jy  sigma=8.934465
! Fit after  self-cal, rms=0.164740Jy  sigma=8.929333
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.164740Jy  sigma=8.929333
! Fit after  self-cal, rms=0.162098Jy  sigma=8.650482
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9139 mas, bmaj=2.618 mas, bpa=-71.45 degrees
! Estimated noise=0.182244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133066 Jy
! Component: 100  -  total flux cleaned = 0.000673333 Jy
! Component: 150  -  total flux cleaned = -0.000829442 Jy
! Component: 200  -  total flux cleaned = -0.000835306 Jy
! Total flux subtracted in 200 components = -0.000835306 Jy
! Clean residual min=-0.015511 max=0.014341 Jy/beam
! Clean residual mean=-0.000000 rms=0.003455 Jy/beam
! Combined flux in latest and established models = 3.30927 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 145 components and 3.30927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.160909Jy  sigma=8.528875
! Fit after  self-cal, rms=0.160878Jy  sigma=8.525015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000583197 Jy
! Component: 100  -  total flux cleaned = 0.00129558 Jy
! Component: 150  -  total flux cleaned = 0.00196245 Jy
! Component: 200  -  total flux cleaned = 0.00302465 Jy
! Total flux subtracted in 200 components = 0.00302465 Jy
! Clean residual min=-0.014802 max=0.014097 Jy/beam
! Clean residual mean=-0.000000 rms=0.003347 Jy/beam
! Combined flux in latest and established models = 3.31229 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 155 components and 3.31229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.160233Jy  sigma=8.468817
! Fit after  self-cal, rms=0.160222Jy  sigma=8.466683
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.160222Jy  sigma=8.466683
! Fit after  self-cal, rms=0.160017Jy  sigma=8.441728
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.895 mas, bmaj=3.342 mas, bpa=-85.01 degrees
! Estimated noise=0.212731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00474239 Jy
! Component: 100  -  total flux cleaned = 0.00578439 Jy
! Component: 150  -  total flux cleaned = 0.00579531 Jy
! Component: 200  -  total flux cleaned = 0.00655464 Jy
! Total flux subtracted in 200 components = 0.00655464 Jy
! Clean residual min=-0.016435 max=0.015756 Jy/beam
! Clean residual mean=-0.000002 rms=0.004454 Jy/beam
! Combined flux in latest and established models = 3.31885 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 168 components and 3.31885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.159541Jy  sigma=8.415541
! Fit after  self-cal, rms=0.159471Jy  sigma=8.404978
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126222 Jy
! Component: 100  -  total flux cleaned = 0.00343167 Jy
! Component: 150  -  total flux cleaned = 0.00520323 Jy
! Component: 200  -  total flux cleaned = 0.0071048 Jy
! Total flux subtracted in 200 components = 0.0071048 Jy
! Clean residual min=-0.015723 max=0.014856 Jy/beam
! Clean residual mean=-0.000002 rms=0.004258 Jy/beam
! Combined flux in latest and established models = 3.32595 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 178 components and 3.32595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.159262Jy  sigma=8.395241
! Fit after  self-cal, rms=0.159272Jy  sigma=8.392179
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.914 mas, bmaj=2.617 mas, bpa=-71.46 degrees
! Estimated noise=0.182087 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.914 x 2.617 at -71.46 degrees (North through East)
! Clean map  min=-0.01217  max=2.4853 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.159272Jy  sigma=8.392179
! Fit after  self-cal, rms=0.155602Jy  sigma=7.980878
! Inverting map and beam 
! Estimated beam: bmin=0.9148 mas, bmaj=2.616 mas, bpa=-71.44 degrees
! Estimated noise=0.181655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00599998 Jy
! Component: 100  -  total flux cleaned = -0.00687459 Jy
! Component: 150  -  total flux cleaned = -0.00834867 Jy
! Component: 200  -  total flux cleaned = -0.00945861 Jy
! Total flux subtracted in 200 components = -0.00945861 Jy
! Clean residual min=-0.013616 max=0.012991 Jy/beam
! Clean residual mean=-0.000002 rms=0.003310 Jy/beam
! Combined flux in latest and established models = 3.31649 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 191 components and 3.31649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.153851Jy  sigma=7.933940
! Fit after  self-cal, rms=0.153835Jy  sigma=7.931175
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226786 Jy
! Component: 100  -  total flux cleaned = 0.000178847 Jy
! Component: 150  -  total flux cleaned = 0.00055715 Jy
! Component: 200  -  total flux cleaned = 0.00110192 Jy
! Total flux subtracted in 200 components = 0.00110192 Jy
! Clean residual min=-0.013265 max=0.012859 Jy/beam
! Clean residual mean=-0.000002 rms=0.003239 Jy/beam
! Combined flux in latest and established models = 3.31759 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 199 components and 3.31759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.153123Jy  sigma=7.902769
! Fit after  self-cal, rms=0.153120Jy  sigma=7.901003
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.153120Jy  sigma=7.901003
! Fit after  self-cal, rms=0.152866Jy  sigma=7.866848
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6958 mas, bmaj=2.309 mas, bpa=-70.69 degrees
! Estimated noise=0.285905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.82629 Jy
! Component: 100  -  total flux cleaned = 2.2722 Jy
! Component: 150  -  total flux cleaned = 2.49169 Jy
! Component: 200  -  total flux cleaned = 2.6181 Jy
! Total flux subtracted in 200 components = 2.6181 Jy
! Clean residual min=-0.044226 max=0.065352 Jy/beam
! Clean residual mean=0.000002 rms=0.008881 Jy/beam
! Combined flux in latest and established models = 2.6181 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 2.6181 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9147 mas, bmaj=2.615 mas, bpa=-71.44 degrees
! Estimated noise=0.181145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122544 Jy
! Component: 100  -  total flux cleaned = 0.201437 Jy
! Component: 150  -  total flux cleaned = 0.262524 Jy
! Component: 200  -  total flux cleaned = 0.311805 Jy
! Total flux subtracted in 200 components = 0.311805 Jy
! Clean residual min=-0.043849 max=0.040657 Jy/beam
! Clean residual mean=0.000005 rms=0.008374 Jy/beam
! Combined flux in latest and established models = 2.92991 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 53 components and 2.92991 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.894 mas, bmaj=3.338 mas, bpa=-84.97 degrees
! Estimated noise=0.211602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0663763 Jy
! Component: 100  -  total flux cleaned = 0.112957 Jy
! Component: 150  -  total flux cleaned = 0.148156 Jy
! Component: 200  -  total flux cleaned = 0.176131 Jy
! Total flux subtracted in 200 components = 0.176131 Jy
! Clean residual min=-0.036189 max=0.027445 Jy/beam
! Clean residual mean=-0.000001 rms=0.007212 Jy/beam
! Combined flux in latest and established models = 3.10604 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0231955 Jy
! Component: 100  -  total flux cleaned = 0.0431012 Jy
! Component: 150  -  total flux cleaned = 0.06035 Jy
! Component: 200  -  total flux cleaned = 0.0754077 Jy
! Total flux subtracted in 200 components = 0.0754077 Jy
! Clean residual min=-0.026509 max=0.022530 Jy/beam
! Clean residual mean=-0.000002 rms=0.005530 Jy/beam
! Combined flux in latest and established models = 3.18145 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 110 components and 3.18145 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9147 mas, bmaj=2.615 mas, bpa=-71.44 degrees
! Estimated noise=0.181145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213127 Jy
! Component: 100  -  total flux cleaned = 0.0339751 Jy
! Component: 150  -  total flux cleaned = 0.0425913 Jy
! Component: 200  -  total flux cleaned = 0.0508433 Jy
! Total flux subtracted in 200 components = 0.0508433 Jy
! Clean residual min=-0.021514 max=0.015259 Jy/beam
! Clean residual mean=0.000001 rms=0.003804 Jy/beam
! Combined flux in latest and established models = 3.23229 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 128 components and 3.23229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.159129Jy  sigma=8.573530
! Fit after  self-cal, rms=0.158329Jy  sigma=8.514953
wmodel /scr/pima/s5272c_uvs/J2038+5119_X_map.mod
! Writing 128 model components to file: /scr/pima/s5272c_uvs/J2038+5119_X_map.mod
wobs /scr/pima/s5272c_uvs/J2038+5119_X_uvs.fits
! Writing UV FITS file: /scr/pima/s5272c_uvs/J2038+5119_X_uvs.fits
wwins /scr/pima/s5272c_uvs/J2038+5119_X_map.win
! wwins: Wrote 3 windows to /scr/pima/s5272c_uvs/J2038+5119_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00686294 Jy
! Component: 100  -  total flux cleaned = -0.011027 Jy
! Component: 150  -  total flux cleaned = -0.0135095 Jy
! Component: 200  -  total flux cleaned = -0.0163977 Jy
! Component: 250  -  total flux cleaned = -0.0188919 Jy
! Component: 300  -  total flux cleaned = -0.019377 Jy
! Component: 350  -  total flux cleaned = -0.020069 Jy
! Component: 400  -  total flux cleaned = -0.0202946 Jy
! Component: 450  -  total flux cleaned = -0.020942 Jy
! Component: 500  -  total flux cleaned = -0.0217863 Jy
! Component: 550  -  total flux cleaned = -0.023014 Jy
! Component: 600  -  total flux cleaned = -0.0228128 Jy
! Component: 650  -  total flux cleaned = -0.0228145 Jy
! Component: 700  -  total flux cleaned = -0.0232007 Jy
! Component: 750  -  total flux cleaned = -0.0232055 Jy
! Component: 800  -  total flux cleaned = -0.0235695 Jy
! Component: 850  -  total flux cleaned = -0.0233885 Jy
! Component: 900  -  total flux cleaned = -0.0235647 Jy
! Component: 950  -  total flux cleaned = -0.0235638 Jy
! Component: 1000  -  total flux cleaned = -0.0235656 Jy
! Component: 1050  -  total flux cleaned = -0.0232332 Jy
! Component: 1100  -  total flux cleaned = -0.023562 Jy
! Component: 1150  -  total flux cleaned = -0.0229196 Jy
! Component: 1200  -  total flux cleaned = -0.0227609 Jy
! Component: 1250  -  total flux cleaned = -0.0227587 Jy
! Component: 1300  -  total flux cleaned = -0.0222972 Jy
! Component: 1350  -  total flux cleaned = -0.0216914 Jy
! Component: 1400  -  total flux cleaned = -0.0213949 Jy
! Component: 1450  -  total flux cleaned = -0.0209557 Jy
! Component: 1500  -  total flux cleaned = -0.0206694 Jy
! Component: 1550  -  total flux cleaned = -0.0205286 Jy
! Component: 1600  -  total flux cleaned = -0.0205263 Jy
! Component: 1650  -  total flux cleaned = -0.0203856 Jy
! Component: 1700  -  total flux cleaned = -0.0198417 Jy
! Component: 1750  -  total flux cleaned = -0.020377 Jy
! Component: 1800  -  total flux cleaned = -0.0198467 Jy
! Component: 1850  -  total flux cleaned = -0.0197162 Jy
! Component: 1900  -  total flux cleaned = -0.0199744 Jy
! Component: 1950  -  total flux cleaned = -0.0197212 Jy
! Component: 2000  -  total flux cleaned = -0.0199704 Jy
! Component: 2050  -  total flux cleaned = -0.019726 Jy
! Component: 2100  -  total flux cleaned = -0.0199695 Jy
! Component: 2150  -  total flux cleaned = -0.0197288 Jy
! Component: 2200  -  total flux cleaned = -0.0197304 Jy
! Component: 2250  -  total flux cleaned = -0.019494 Jy
! Component: 2300  -  total flux cleaned = -0.0186847 Jy
! Component: 2350  -  total flux cleaned = -0.0191432 Jy
! Component: 2400  -  total flux cleaned = -0.018917 Jy
! Component: 2450  -  total flux cleaned = -0.0186937 Jy
! Component: 2500  -  total flux cleaned = -0.0188037 Jy
! Component: 2550  -  total flux cleaned = -0.0191336 Jy
! Component: 2600  -  total flux cleaned = -0.019132 Jy
! Component: 2650  -  total flux cleaned = -0.0189175 Jy
! Component: 2700  -  total flux cleaned = -0.0185978 Jy
! Component: 2750  -  total flux cleaned = -0.0181774 Jy
! Component: 2800  -  total flux cleaned = -0.0179694 Jy
! Component: 2850  -  total flux cleaned = -0.0182818 Jy
! Component: 2900  -  total flux cleaned = -0.0184862 Jy
! Component: 2950  -  total flux cleaned = -0.0187892 Jy
! Component: 3000  -  total flux cleaned = -0.0191878 Jy
! Component: 3050  -  total flux cleaned = -0.0186936 Jy
! Component: 3100  -  total flux cleaned = -0.0190863 Jy
! Component: 3150  -  total flux cleaned = -0.0191833 Jy
! Component: 3200  -  total flux cleaned = -0.0187027 Jy
! Component: 3250  -  total flux cleaned = -0.0192736 Jy
! Component: 3300  -  total flux cleaned = -0.0188943 Jy
! Component: 3350  -  total flux cleaned = -0.018802 Jy
! Component: 3400  -  total flux cleaned = -0.0190812 Jy
! Component: 3450  -  total flux cleaned = -0.0192637 Jy
! Component: 3500  -  total flux cleaned = -0.0194451 Jy
! Component: 3550  -  total flux cleaned = -0.0197151 Jy
! Component: 3600  -  total flux cleaned = -0.0195358 Jy
! Component: 3650  -  total flux cleaned = -0.0199785 Jy
! Component: 3700  -  total flux cleaned = -0.0201542 Jy
! Component: 3750  -  total flux cleaned = -0.0204157 Jy
! Component: 3800  -  total flux cleaned = -0.0205023 Jy
! Component: 3850  -  total flux cleaned = -0.0208446 Jy
! Component: 3900  -  total flux cleaned = -0.0210151 Jy
! Component: 3950  -  total flux cleaned = -0.0211842 Jy
! Component: 4000  -  total flux cleaned = -0.021434 Jy
! Component: 4050  -  total flux cleaned = -0.0220142 Jy
! Total flux subtracted in 4096 components = -0.0220952 Jy
! Clean residual min=-0.004099 max=0.004134 Jy/beam
! Clean residual mean=-0.000000 rms=0.001526 Jy/beam
! Combined flux in latest and established models = 3.21019 Jy
keep
! Adding 333 model components to the UV plane model.
! The established model now contains 460 components and 3.2102 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s5272c_uvs/J2038+5119_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9147 x 2.615 at -71.44 degrees (North through East)
! Clean map  min=-0.015295  max=2.4798 Jy/beam
! Writing clean map to FITS file: /scr/pima/s5272c_uvs/J2038+5119_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.47978 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00152565 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.184571 0.184571 0.369142 0.738284 1.47657 2.95314 5.90628 11.8126 23.6251 47.2502 94.5004
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0045 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.479 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1625.39 
quit
! Quitting program
! Log file /scr/pima/s5272c_uvs/J2038+5119_X_uvs.log closed on Wed Jan  1 14:24:11 2014