! Started logfile: /scr/pima/s5272b_uvs/J0437-1844_X_uvs.log on Wed Dec 18 20:23:59 2013
obs /scr/pima/s5272b_uvs/J0437-1844_X_uva.fits
! Reading UV FITS file: /scr/pima/s5272b_uvs/J0437-1844_X_uva.fits
! AN table 1: 25 integrations on 36 of 36 possible baselines.
! AN table 2: 5 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.955224 visibilities/baseline/integration-bin.
! Found source: J0437-1844
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR LL RL LR
! 
! Read 0 lines of history.
! 
! Reading 30720 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/s5272b_uvs/J0437-1844_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.104920Jy  sigma=17.702348
! Fit after  self-cal, rms=0.619998Jy  sigma=7.506744
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7593 mas, bmaj=2.274 mas, bpa=-15.49 degrees
! Estimated noise=1.21732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325156 Jy
! Component: 100  -  total flux cleaned = 0.431797 Jy
! Total flux subtracted in 100 components = 0.431797 Jy
! Clean residual min=-0.021705 max=0.046562 Jy/beam
! Clean residual mean=0.000014 rms=0.004654 Jy/beam
! Combined flux in latest and established models = 0.431797 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.431797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.131497Jy  sigma=2.627402
! Fit after  self-cal, rms=0.130773Jy  sigma=2.621372
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0548583 Jy
! Component: 100  -  total flux cleaned = 0.0853422 Jy
! Total flux subtracted in 100 components = 0.0853422 Jy
! Clean residual min=-0.017049 max=0.019538 Jy/beam
! Clean residual mean=-0.000001 rms=0.003058 Jy/beam
! Combined flux in latest and established models = 0.517139 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.517139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.101456Jy  sigma=1.859636
! Fit after  self-cal, rms=0.101383Jy  sigma=1.857126
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206651 Jy
! Component: 100  -  total flux cleaned = 0.0333234 Jy
! Total flux subtracted in 100 components = 0.0333234 Jy
! Clean residual min=-0.014998 max=0.018285 Jy/beam
! Clean residual mean=-0.000007 rms=0.002733 Jy/beam
! Combined flux in latest and established models = 0.550462 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.550462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096250Jy  sigma=1.648280
! Fit after  self-cal, rms=0.096465Jy  sigma=1.646813
! Inverting map 
! Added new window around map position (-1.6, -4.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160831 Jy
! Component: 100  -  total flux cleaned = 0.0257153 Jy
! Total flux subtracted in 100 components = 0.0257153 Jy
! Clean residual min=-0.013551 max=0.017078 Jy/beam
! Clean residual mean=-0.000010 rms=0.002531 Jy/beam
! Combined flux in latest and established models = 0.576178 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.576178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093387Jy  sigma=1.526448
! Fit after  self-cal, rms=0.093424Jy  sigma=1.520745
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.847 mas, bpa=-13.23 degrees
! Estimated noise=0.606916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244606 Jy
! Component: 100  -  total flux cleaned = 0.0401434 Jy
! Component: 150  -  total flux cleaned = 0.0506975 Jy
! Component: 200  -  total flux cleaned = 0.0579633 Jy
! Total flux subtracted in 200 components = 0.0579633 Jy
! Clean residual min=-0.018611 max=0.017665 Jy/beam
! Clean residual mean=-0.000010 rms=0.004024 Jy/beam
! Combined flux in latest and established models = 0.634141 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 58 components and 0.634141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092070Jy  sigma=1.339968
! Fit after  self-cal, rms=0.091980Jy  sigma=1.335282
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 2.847 at -13.23 degrees (North through East)
! Clean map  min=-0.018272  max=0.44642 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.93     HN        0.90     KP        1.00     
!   MK        1.00     NL        1.11     OV        0.96     PT        0.83     
!   SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.00     HN        0.94     KP        1.10     
!   MK        1.05     NL        1.10     OV        0.98     PT        0.84     
!   SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.00     KP        0.99     
!   MK        1.09     NL        1.08     OV        1.01     PT        0.90     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        0.95     KP        1.14     
!   MK        0.99     NL        1.07     OV        0.98     PT        0.86     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.05     HN        1.10     KP        1.10     
!   MK        1.03     NL        1.10     OV        1.05     PT        0.89     
!   SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        1.03     KP        1.11     
!   MK        0.99     NL        1.13     OV        1.06     PT        0.85     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.091980Jy  sigma=1.335282
! Fit after  self-cal, rms=0.079773Jy  sigma=0.999112
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=2.843 mas, bpa=-12.77 degrees
! Estimated noise=0.602297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00541197 Jy
! Component: 100  -  total flux cleaned = 0.00612118 Jy
! Component: 150  -  total flux cleaned = 0.00713788 Jy
! Component: 200  -  total flux cleaned = 0.00784337 Jy
! Total flux subtracted in 200 components = 0.00784337 Jy
! Clean residual min=-0.007447 max=0.007710 Jy/beam
! Clean residual mean=0.000002 rms=0.001598 Jy/beam
! Combined flux in latest and established models = 0.641985 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.641985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077281Jy  sigma=0.971660
! Fit after  self-cal, rms=0.077151Jy  sigma=0.968193
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077151Jy  sigma=0.968193
! Fit after  self-cal, rms=0.076979Jy  sigma=0.964314
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=2.838 mas, bpa=-12.74 degrees
! Estimated noise=0.598128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000811817 Jy
! Component: 100  -  total flux cleaned = 0.00130743 Jy
! Component: 150  -  total flux cleaned = 0.00203767 Jy
! Component: 200  -  total flux cleaned = 0.00268765 Jy
! Total flux subtracted in 200 components = 0.00268765 Jy
! Clean residual min=-0.007247 max=0.007302 Jy/beam
! Clean residual mean=0.000004 rms=0.001548 Jy/beam
! Combined flux in latest and established models = 0.644672 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 88 components and 0.644672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075858Jy  sigma=0.955805
! Fit after  self-cal, rms=0.075784Jy  sigma=0.954817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0009874 Jy
! Component: 100  -  total flux cleaned = 0.00157196 Jy
! Component: 150  -  total flux cleaned = 0.00188991 Jy
! Component: 200  -  total flux cleaned = 0.00208404 Jy
! Total flux subtracted in 200 components = 0.00208404 Jy
! Clean residual min=-0.007265 max=0.006907 Jy/beam
! Clean residual mean=0.000003 rms=0.001502 Jy/beam
! Combined flux in latest and established models = 0.646756 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.646756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075340Jy  sigma=0.950919
! Fit after  self-cal, rms=0.075285Jy  sigma=0.950346
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075285Jy  sigma=0.950346
! Fit after  self-cal, rms=0.075112Jy  sigma=0.946202
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=2.836 mas, bpa=-12.75 degrees
! Estimated noise=0.595114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305244 Jy
! Component: 100  -  total flux cleaned = 0.00022858 Jy
! Component: 150  -  total flux cleaned = 0.000706929 Jy
! Component: 200  -  total flux cleaned = 0.0011451 Jy
! Total flux subtracted in 200 components = 0.0011451 Jy
! Clean residual min=-0.006985 max=0.006776 Jy/beam
! Clean residual mean=0.000005 rms=0.001518 Jy/beam
! Combined flux in latest and established models = 0.647901 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 112 components and 0.647901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074559Jy  sigma=0.943486
! Fit after  self-cal, rms=0.074539Jy  sigma=0.943099
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000836015 Jy
! Component: 100  -  total flux cleaned = 0.00107948 Jy
! Component: 150  -  total flux cleaned = 0.00123004 Jy
! Component: 200  -  total flux cleaned = 0.00129945 Jy
! Total flux subtracted in 200 components = 0.00129945 Jy
! Clean residual min=-0.007004 max=0.006501 Jy/beam
! Clean residual mean=0.000005 rms=0.001499 Jy/beam
! Combined flux in latest and established models = 0.649201 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 119 components and 0.649201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074307Jy  sigma=0.941415
! Fit after  self-cal, rms=0.074289Jy  sigma=0.941138
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074289Jy  sigma=0.941138
! Fit after  self-cal, rms=0.074248Jy  sigma=0.940509
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.307 mas, bmaj=4.568 mas, bpa=-4.865 degrees
! Estimated noise=0.610011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010347 Jy
! Component: 100  -  total flux cleaned = 0.00126533 Jy
! Component: 150  -  total flux cleaned = 0.00147386 Jy
! Component: 200  -  total flux cleaned = 0.00160112 Jy
! Total flux subtracted in 200 components = 0.00160112 Jy
! Clean residual min=-0.008897 max=0.007408 Jy/beam
! Clean residual mean=0.000009 rms=0.002199 Jy/beam
! Combined flux in latest and established models = 0.650802 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 132 components and 0.650802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074097Jy  sigma=0.938918
! Fit after  self-cal, rms=0.074096Jy  sigma=0.938799
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000437503 Jy
! Component: 100  -  total flux cleaned = 0.000559729 Jy
! Component: 150  -  total flux cleaned = 0.000673378 Jy
! Component: 200  -  total flux cleaned = 0.000728185 Jy
! Total flux subtracted in 200 components = 0.000728185 Jy
! Clean residual min=-0.008871 max=0.006997 Jy/beam
! Clean residual mean=0.000009 rms=0.002178 Jy/beam
! Combined flux in latest and established models = 0.65153 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 138 components and 0.651531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074041Jy  sigma=0.937970
! Fit after  self-cal, rms=0.074037Jy  sigma=0.937906
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.83 mas, bpa=-12.71 degrees
! Estimated noise=0.59295 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 2.83 at -12.71 degrees (North through East)
! Clean map  min=-0.0067722  max=0.4281 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7597 mas, bmaj=2.253 mas, bpa=-15.06 degrees
! Estimated noise=1.19305 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.320352 Jy
! Component: 100  -  total flux cleaned = 0.427039 Jy
! Component: 150  -  total flux cleaned = 0.479641 Jy
! Component: 200  -  total flux cleaned = 0.512441 Jy
! Total flux subtracted in 200 components = 0.512441 Jy
! Clean residual min=-0.011818 max=0.017582 Jy/beam
! Clean residual mean=0.000011 rms=0.002382 Jy/beam
! Combined flux in latest and established models = 0.512441 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.512441 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.83 mas, bpa=-12.71 degrees
! Estimated noise=0.59295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0442135 Jy
! Component: 100  -  total flux cleaned = 0.0700991 Jy
! Component: 150  -  total flux cleaned = 0.0874277 Jy
! Component: 200  -  total flux cleaned = 0.0998429 Jy
! Total flux subtracted in 200 components = 0.0998429 Jy
! Clean residual min=-0.009044 max=0.009516 Jy/beam
! Clean residual mean=0.000015 rms=0.002400 Jy/beam
! Combined flux in latest and established models = 0.612284 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 83 components and 0.612284 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.307 mas, bmaj=4.568 mas, bpa=-4.865 degrees
! Estimated noise=0.610011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138488 Jy
! Component: 100  -  total flux cleaned = 0.0224499 Jy
! Component: 150  -  total flux cleaned = 0.0281293 Jy
! Component: 200  -  total flux cleaned = 0.0321132 Jy
! Total flux subtracted in 200 components = 0.0321132 Jy
! Clean residual min=-0.009765 max=0.008089 Jy/beam
! Clean residual mean=0.000012 rms=0.002336 Jy/beam
! Combined flux in latest and established models = 0.644397 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284817 Jy
! Component: 100  -  total flux cleaned = 0.00439324 Jy
! Component: 150  -  total flux cleaned = 0.00497551 Jy
! Component: 200  -  total flux cleaned = 0.00544821 Jy
! Total flux subtracted in 200 components = 0.00544821 Jy
! Clean residual min=-0.009359 max=0.007753 Jy/beam
! Clean residual mean=0.000009 rms=0.002225 Jy/beam
! Combined flux in latest and established models = 0.649845 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 133 components and 0.649845 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=2.83 mas, bpa=-12.71 degrees
! Estimated noise=0.59295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0011563 Jy
! Component: 100  -  total flux cleaned = -0.00115912 Jy
! Component: 150  -  total flux cleaned = -0.000960474 Jy
! Component: 200  -  total flux cleaned = -0.000778025 Jy
! Total flux subtracted in 200 components = -0.000778025 Jy
! Clean residual min=-0.007093 max=0.006624 Jy/beam
! Clean residual mean=0.000005 rms=0.001523 Jy/beam
! Combined flux in latest and established models = 0.649067 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 149 components and 0.649067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.074186Jy  sigma=0.942507
! Fit after  self-cal, rms=0.074121Jy  sigma=0.941761
wmodel /scr/pima/s5272b_uvs/J0437-1844_X_map.mod
! Writing 149 model components to file: /scr/pima/s5272b_uvs/J0437-1844_X_map.mod
wobs /scr/pima/s5272b_uvs/J0437-1844_X_uvs.fits
! Writing UV FITS file: /scr/pima/s5272b_uvs/J0437-1844_X_uvs.fits
wwins /scr/pima/s5272b_uvs/J0437-1844_X_map.win
! wwins: Wrote 3 windows to /scr/pima/s5272b_uvs/J0437-1844_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000775701 Jy
! Component: 100  -  total flux cleaned = -0.00165287 Jy
! Component: 150  -  total flux cleaned = -0.00325829 Jy
! Component: 200  -  total flux cleaned = -0.00505417 Jy
! Component: 250  -  total flux cleaned = -0.00630314 Jy
! Component: 300  -  total flux cleaned = -0.00740364 Jy
! Component: 350  -  total flux cleaned = -0.00820809 Jy
! Component: 400  -  total flux cleaned = -0.00882631 Jy
! Component: 450  -  total flux cleaned = -0.00956942 Jy
! Component: 500  -  total flux cleaned = -0.0104303 Jy
! Component: 550  -  total flux cleaned = -0.0110552 Jy
! Component: 600  -  total flux cleaned = -0.0117297 Jy
! Component: 650  -  total flux cleaned = -0.0123851 Jy
! Component: 700  -  total flux cleaned = -0.0130881 Jy
! Component: 750  -  total flux cleaned = -0.013837 Jy
! Component: 800  -  total flux cleaned = -0.014633 Jy
! Component: 850  -  total flux cleaned = -0.0153534 Jy
! Component: 900  -  total flux cleaned = -0.0160005 Jy
! Component: 950  -  total flux cleaned = -0.0166948 Jy
! Component: 1000  -  total flux cleaned = -0.0171494 Jy
! Component: 1050  -  total flux cleaned = -0.0177088 Jy
! Component: 1100  -  total flux cleaned = -0.0180935 Jy
! Component: 1150  -  total flux cleaned = -0.0185816 Jy
! Component: 1200  -  total flux cleaned = -0.0191692 Jy
! Component: 1250  -  total flux cleaned = -0.0194326 Jy
! Component: 1300  -  total flux cleaned = -0.0200033 Jy
! Component: 1350  -  total flux cleaned = -0.02026 Jy
! Component: 1400  -  total flux cleaned = -0.0208157 Jy
! Component: 1450  -  total flux cleaned = -0.0212153 Jy
! Component: 1500  -  total flux cleaned = -0.0214118 Jy
! Component: 1550  -  total flux cleaned = -0.0217046 Jy
! Component: 1600  -  total flux cleaned = -0.0221865 Jy
! Component: 1650  -  total flux cleaned = -0.022471 Jy
! Component: 1700  -  total flux cleaned = -0.0226117 Jy
! Component: 1750  -  total flux cleaned = -0.0229835 Jy
! Component: 1800  -  total flux cleaned = -0.0230754 Jy
! Component: 1850  -  total flux cleaned = -0.0233477 Jy
! Component: 1900  -  total flux cleaned = -0.0233932 Jy
! Component: 1950  -  total flux cleaned = -0.0236158 Jy
! Component: 2000  -  total flux cleaned = -0.0236603 Jy
! Component: 2050  -  total flux cleaned = -0.0239215 Jy
! Component: 2100  -  total flux cleaned = -0.0239649 Jy
! Component: 2150  -  total flux cleaned = -0.0240933 Jy
! Component: 2200  -  total flux cleaned = -0.0241782 Jy
! Component: 2250  -  total flux cleaned = -0.0242616 Jy
! Component: 2300  -  total flux cleaned = -0.0241789 Jy
! Component: 2350  -  total flux cleaned = -0.0243842 Jy
! Component: 2400  -  total flux cleaned = -0.0245067 Jy
! Component: 2450  -  total flux cleaned = -0.0245876 Jy
! Component: 2500  -  total flux cleaned = -0.0245873 Jy
! Component: 2550  -  total flux cleaned = -0.0247847 Jy
! Component: 2600  -  total flux cleaned = -0.0246673 Jy
! Component: 2650  -  total flux cleaned = -0.0246674 Jy
! Component: 2700  -  total flux cleaned = -0.0247059 Jy
! Component: 2750  -  total flux cleaned = -0.0248588 Jy
! Component: 2800  -  total flux cleaned = -0.0247451 Jy
! Component: 2850  -  total flux cleaned = -0.0249333 Jy
! Component: 2900  -  total flux cleaned = -0.0249709 Jy
! Component: 2950  -  total flux cleaned = -0.0248228 Jy
! Component: 3000  -  total flux cleaned = -0.0250071 Jy
! Component: 3050  -  total flux cleaned = -0.0251162 Jy
! Component: 3100  -  total flux cleaned = -0.0250801 Jy
! Component: 3150  -  total flux cleaned = -0.0250084 Jy
! Component: 3200  -  total flux cleaned = -0.025151 Jy
! Component: 3250  -  total flux cleaned = -0.0251151 Jy
! Component: 3300  -  total flux cleaned = -0.0251502 Jy
! Component: 3350  -  total flux cleaned = -0.0251504 Jy
! Component: 3400  -  total flux cleaned = -0.0251508 Jy
! Component: 3450  -  total flux cleaned = -0.0250824 Jy
! Component: 3500  -  total flux cleaned = -0.025082 Jy
! Component: 3550  -  total flux cleaned = -0.0251497 Jy
! Component: 3600  -  total flux cleaned = -0.0251159 Jy
! Component: 3650  -  total flux cleaned = -0.0251495 Jy
! Component: 3700  -  total flux cleaned = -0.0251492 Jy
! Component: 3750  -  total flux cleaned = -0.0251492 Jy
! Component: 3800  -  total flux cleaned = -0.0250838 Jy
! Component: 3850  -  total flux cleaned = -0.0251486 Jy
! Component: 3900  -  total flux cleaned = -0.0250199 Jy
! Component: 3950  -  total flux cleaned = -0.02518 Jy
! Component: 4000  -  total flux cleaned = -0.0251802 Jy
! Component: 4050  -  total flux cleaned = -0.0252119 Jy
! Total flux subtracted in 4096 components = -0.0251804 Jy
! Clean residual min=-0.001869 max=0.002359 Jy/beam
! Clean residual mean=0.000004 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.623887 Jy
keep
! Adding 355 model components to the UV plane model.
! The established model now contains 504 components and 0.623887 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s5272b_uvs/J0437-1844_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 2.83 at -12.71 degrees (North through East)
! Clean map  min=-0.0052019  max=0.42859 Jy/beam
! Writing clean map to FITS file: /scr/pima/s5272b_uvs/J0437-1844_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.428585 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000609272 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.426476 0.426476 0.852952 1.7059 3.41181 6.82362 13.6472 27.2945 54.589
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.428 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  703.439 
quit
! Quitting program
! Log file /scr/pima/s5272b_uvs/J0437-1844_X_uvs.log closed on Wed Dec 18 20:24:04 2013