! Started logfile: /scr/pima/s5272a_uvs/J0136+4751_X_uvs.log on Mon Dec 16 09:33:37 2013
obs /scr/pima/s5272a_uvs/J0136+4751_X_uva.fits
! Reading UV FITS file: /scr/pima/s5272a_uvs/J0136+4751_X_uva.fits
! AN table 1: 4 integrations on 28 of 28 possible baselines.
! AN table 2: 3 integrations on 28 of 28 possible baselines.
! AN table 3: 20 integrations on 36 of 36 possible baselines.
! AN table 4: 10 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.855351 visibilities/baseline/integration-bin.
! Found source: J0136+4751
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR LL RL LR
! 
! Read 0 lines of history.
! 
! Reading 32736 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/s5272a_uvs/J0136+4751_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=4.048611Jy  sigma=573.278128
! Fit after  self-cal, rms=2.964461Jy  sigma=427.930540
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9082 mas, bmaj=1.237 mas, bpa=7.513 degrees
! Estimated noise=0.0991865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07389 Jy
! Component: 100  -  total flux cleaned = 3.74674 Jy
! Total flux subtracted in 100 components = 3.74674 Jy
! Clean residual min=-0.088819 max=0.202220 Jy/beam
! Clean residual mean=-0.000241 rms=0.023781 Jy/beam
! Combined flux in latest and established models = 3.74674 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 3.74674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.041523Jy  sigma=114.668625
! Fit after  self-cal, rms=1.041401Jy  sigma=114.664916
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.211505 Jy
! Component: 100  -  total flux cleaned = 0.32643 Jy
! Total flux subtracted in 100 components = 0.32643 Jy
! Clean residual min=-0.084700 max=0.102780 Jy/beam
! Clean residual mean=-0.000194 rms=0.020883 Jy/beam
! Combined flux in latest and established models = 4.07317 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 4.07317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.043181Jy  sigma=100.314170
! Fit after  self-cal, rms=1.043160Jy  sigma=100.311887
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.146 mas, bmaj=1.528 mas, bpa=7.377 degrees
! Estimated noise=0.063639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11285 Jy
! Component: 100  -  total flux cleaned = 0.174511 Jy
! Component: 150  -  total flux cleaned = 0.210417 Jy
! Component: 200  -  total flux cleaned = 0.231332 Jy
! Total flux subtracted in 200 components = 0.231332 Jy
! Clean residual min=-0.089081 max=0.123671 Jy/beam
! Clean residual mean=-0.000873 rms=0.026544 Jy/beam
! Combined flux in latest and established models = 4.3045 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 4.3045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.057108Jy  sigma=95.606723
! Fit after  self-cal, rms=1.056837Jy  sigma=95.571518
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.146 x 1.528 at 7.377 degrees (North through East)
! Clean map  min=-0.087164  max=4.0003 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.07     HN        1.00     KP        1.07     LA        0.94     
!   MK        1.10     NL        1.08     OV        0.99     PT        0.89     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.12     HN        1.09     KP        1.14     LA        0.99     
!   MK        1.00     NL        1.08     OV        1.03     PT        0.88     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.13     HN        1.01     KP        1.15     LA        0.90     
!   MK        1.00     NL        1.09     OV        1.04     PT        0.85     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=1.056837Jy  sigma=95.571518
! Fit after  self-cal, rms=1.043965Jy  sigma=93.965632
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.145 mas, bmaj=1.532 mas, bpa=7.371 degrees
! Estimated noise=0.063816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131123 Jy
! Component: 100  -  total flux cleaned = 0.0131121 Jy
! Component: 150  -  total flux cleaned = 0.0135852 Jy
! Component: 200  -  total flux cleaned = 0.0132072 Jy
! Total flux subtracted in 200 components = 0.0132072 Jy
! Clean residual min=-0.085616 max=0.120694 Jy/beam
! Clean residual mean=-0.000844 rms=0.025378 Jy/beam
! Combined flux in latest and established models = 4.31771 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 4.31771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.046354Jy  sigma=93.601612
! Fit after  self-cal, rms=1.046329Jy  sigma=93.599864
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.046329Jy  sigma=93.599864
! Fit after  self-cal, rms=1.042012Jy  sigma=93.307811
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.144 mas, bmaj=1.533 mas, bpa=7.26 degrees
! Estimated noise=0.0638671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246833 Jy
! Component: 100  -  total flux cleaned = 0.00285926 Jy
! Component: 150  -  total flux cleaned = 0.00287161 Jy
! Component: 200  -  total flux cleaned = 0.00224394 Jy
! Total flux subtracted in 200 components = 0.00224394 Jy
! Clean residual min=-0.084924 max=0.118972 Jy/beam
! Clean residual mean=-0.000833 rms=0.025151 Jy/beam
! Combined flux in latest and established models = 4.31995 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 4.31995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.042222Jy  sigma=93.205581
! Fit after  self-cal, rms=1.042200Jy  sigma=93.204763
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.6, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117533 Jy
! Component: 100  -  total flux cleaned = 0.18063 Jy
! Component: 150  -  total flux cleaned = 0.205289 Jy
! Component: 200  -  total flux cleaned = 0.223176 Jy
! Total flux subtracted in 200 components = 0.223176 Jy
! Clean residual min=-0.081077 max=0.124952 Jy/beam
! Clean residual mean=-0.000762 rms=0.024158 Jy/beam
! Combined flux in latest and established models = 4.54313 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 4.54313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.020319Jy  sigma=90.746842
! Fit after  self-cal, rms=1.018557Jy  sigma=90.226154
! Inverting map 
! Added new window around map position (-1.4, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102371 Jy
! Component: 100  -  total flux cleaned = 0.160351 Jy
! Component: 150  -  total flux cleaned = 0.193468 Jy
! Component: 200  -  total flux cleaned = 0.202398 Jy
! Total flux subtracted in 200 components = 0.202398 Jy
! Clean residual min=-0.074897 max=0.101434 Jy/beam
! Clean residual mean=-0.000669 rms=0.022641 Jy/beam
! Combined flux in latest and established models = 4.74552 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 80 components and 4.74552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.008296Jy  sigma=87.716805
! Fit after  self-cal, rms=1.007629Jy  sigma=87.543962
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.007629Jy  sigma=87.543962
! Fit after  self-cal, rms=1.005242Jy  sigma=86.967237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.143 mas, bmaj=1.533 mas, bpa=7.281 degrees
! Estimated noise=0.0640062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0424622 Jy
! Component: 100  -  total flux cleaned = 0.0590258 Jy
! Component: 150  -  total flux cleaned = 0.0639335 Jy
! Component: 200  -  total flux cleaned = 0.0673288 Jy
! Total flux subtracted in 200 components = 0.0673288 Jy
! Clean residual min=-0.076449 max=0.099033 Jy/beam
! Clean residual mean=-0.000668 rms=0.022294 Jy/beam
! Combined flux in latest and established models = 4.81285 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 89 components and 4.81285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.000824Jy  sigma=86.352526
! Fit after  self-cal, rms=1.000881Jy  sigma=86.316765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159871 Jy
! Component: 100  -  total flux cleaned = 0.0181184 Jy
! Component: 150  -  total flux cleaned = 0.0220809 Jy
! Component: 200  -  total flux cleaned = 0.0230361 Jy
! Total flux subtracted in 200 components = 0.0230361 Jy
! Clean residual min=-0.076942 max=0.095311 Jy/beam
! Clean residual mean=-0.000662 rms=0.022213 Jy/beam
! Combined flux in latest and established models = 4.83589 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 98 components and 4.83589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.996299Jy  sigma=86.145303
! Fit after  self-cal, rms=0.996382Jy  sigma=86.133175
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.996382Jy  sigma=86.133175
! Fit after  self-cal, rms=0.994795Jy  sigma=85.652741
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.246 mas, bmaj=2.629 mas, bpa=21.41 degrees
! Estimated noise=0.0788989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0584372 Jy
! Component: 100  -  total flux cleaned = 0.077909 Jy
! Component: 150  -  total flux cleaned = 0.0849121 Jy
! Component: 200  -  total flux cleaned = 0.0869757 Jy
! Total flux subtracted in 200 components = 0.0869757 Jy
! Clean residual min=-0.113906 max=0.137716 Jy/beam
! Clean residual mean=-0.001362 rms=0.037678 Jy/beam
! Combined flux in latest and established models = 4.92286 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 108 components and 4.92286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.992853Jy  sigma=85.701676
! Fit after  self-cal, rms=0.992906Jy  sigma=85.634845
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169263 Jy
! Component: 100  -  total flux cleaned = 0.019802 Jy
! Component: 150  -  total flux cleaned = 0.0206806 Jy
! Component: 200  -  total flux cleaned = 0.0231193 Jy
! Total flux subtracted in 200 components = 0.0231193 Jy
! Clean residual min=-0.113872 max=0.137179 Jy/beam
! Clean residual mean=-0.001340 rms=0.037446 Jy/beam
! Combined flux in latest and established models = 4.94598 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 113 components and 4.94598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.991656Jy  sigma=85.760858
! Fit after  self-cal, rms=0.991724Jy  sigma=85.741159
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.143 mas, bmaj=1.533 mas, bpa=7.312 degrees
! Estimated noise=0.0640479 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.143 x 1.533 at 7.312 degrees (North through East)
! Clean map  min=-0.074706  max=3.9938 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.991724Jy  sigma=85.741159
! Fit after  self-cal, rms=0.987959Jy  sigma=85.364307
! Inverting map and beam 
! Estimated beam: bmin=1.144 mas, bmaj=1.534 mas, bpa=7.368 degrees
! Estimated noise=0.0639626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0256128 Jy
! Component: 100  -  total flux cleaned = -0.035824 Jy
! Component: 150  -  total flux cleaned = -0.0401194 Jy
! Component: 200  -  total flux cleaned = -0.0432924 Jy
! Total flux subtracted in 200 components = -0.0432924 Jy
! Clean residual min=-0.075611 max=0.094478 Jy/beam
! Clean residual mean=-0.000640 rms=0.021715 Jy/beam
! Combined flux in latest and established models = 4.90269 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 121 components and 4.90269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.983902Jy  sigma=85.162941
! Fit after  self-cal, rms=0.983702Jy  sigma=85.149016
! Inverting map 
! Added new window around map position (10.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0874666 Jy
! Component: 100  -  total flux cleaned = 0.140222 Jy
! Component: 150  -  total flux cleaned = 0.162094 Jy
! Component: 200  -  total flux cleaned = 0.172492 Jy
! Total flux subtracted in 200 components = 0.172492 Jy
! Clean residual min=-0.072562 max=0.083847 Jy/beam
! Clean residual mean=-0.000594 rms=0.021057 Jy/beam
! Combined flux in latest and established models = 5.07518 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 148 components and 5.07518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.966863Jy  sigma=83.736654
! Fit after  self-cal, rms=0.964839Jy  sigma=83.437251
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.964839Jy  sigma=83.437251
! Fit after  self-cal, rms=0.964734Jy  sigma=83.405158
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9065 mas, bmaj=1.243 mas, bpa=7.659 degrees
! Estimated noise=0.099775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.09139 Jy
! Component: 100  -  total flux cleaned = 3.76815 Jy
! Component: 150  -  total flux cleaned = 3.98393 Jy
! Component: 200  -  total flux cleaned = 4.12163 Jy
! Total flux subtracted in 200 components = 4.12163 Jy
! Clean residual min=-0.085484 max=0.100539 Jy/beam
! Clean residual mean=-0.000207 rms=0.020238 Jy/beam
! Combined flux in latest and established models = 4.12163 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 4.12163 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.144 mas, bmaj=1.534 mas, bpa=7.387 degrees
! Estimated noise=0.0639976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.166123 Jy
! Component: 100  -  total flux cleaned = 0.292915 Jy
! Component: 150  -  total flux cleaned = 0.397711 Jy
! Component: 200  -  total flux cleaned = 0.487009 Jy
! Total flux subtracted in 200 components = 0.487009 Jy
! Clean residual min=-0.083523 max=0.099061 Jy/beam
! Clean residual mean=-0.000789 rms=0.023770 Jy/beam
! Combined flux in latest and established models = 4.60864 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 66 components and 4.60864 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=2.628 mas, bpa=21.37 degrees
! Estimated noise=0.0788485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131126 Jy
! Component: 100  -  total flux cleaned = 0.233924 Jy
! Component: 150  -  total flux cleaned = 0.320106 Jy
! Component: 200  -  total flux cleaned = 0.3932 Jy
! Total flux subtracted in 200 components = 0.3932 Jy
! Clean residual min=-0.109877 max=0.134589 Jy/beam
! Clean residual mean=-0.001352 rms=0.037464 Jy/beam
! Combined flux in latest and established models = 5.00184 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0623728 Jy
! Component: 100  -  total flux cleaned = 0.115883 Jy
! Component: 150  -  total flux cleaned = 0.151604 Jy
! Component: 200  -  total flux cleaned = 0.171834 Jy
! Total flux subtracted in 200 components = 0.171834 Jy
! Clean residual min=-0.106938 max=0.132329 Jy/beam
! Clean residual mean=-0.001220 rms=0.035939 Jy/beam
! Combined flux in latest and established models = 5.17367 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 116 components and 5.17367 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.144 mas, bmaj=1.534 mas, bpa=7.387 degrees
! Estimated noise=0.0639976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00282999 Jy
! Component: 100  -  total flux cleaned = 0.000732195 Jy
! Component: 150  -  total flux cleaned = 0.00862652 Jy
! Component: 200  -  total flux cleaned = 0.0115219 Jy
! Total flux subtracted in 200 components = 0.0115219 Jy
! Clean residual min=-0.071322 max=0.084773 Jy/beam
! Clean residual mean=-0.000564 rms=0.021102 Jy/beam
! Combined flux in latest and established models = 5.1852 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 133 components and 5.1852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.964273Jy  sigma=84.234333
! Fit after  self-cal, rms=0.962940Jy  sigma=84.007789
wmodel /scr/pima/s5272a_uvs/J0136+4751_X_map.mod
! Writing 133 model components to file: /scr/pima/s5272a_uvs/J0136+4751_X_map.mod
wobs /scr/pima/s5272a_uvs/J0136+4751_X_uvs.fits
! Writing UV FITS file: /scr/pima/s5272a_uvs/J0136+4751_X_uvs.fits
wwins /scr/pima/s5272a_uvs/J0136+4751_X_map.win
! wwins: Wrote 4 windows to /scr/pima/s5272a_uvs/J0136+4751_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0368329 Jy
! Component: 100  -  total flux cleaned = 0.0651716 Jy
! Component: 150  -  total flux cleaned = 0.0923294 Jy
! Component: 200  -  total flux cleaned = 0.116093 Jy
! Component: 250  -  total flux cleaned = 0.136727 Jy
! Component: 300  -  total flux cleaned = 0.156898 Jy
! Component: 350  -  total flux cleaned = 0.172977 Jy
! Component: 400  -  total flux cleaned = 0.190034 Jy
! Component: 450  -  total flux cleaned = 0.204442 Jy
! Component: 500  -  total flux cleaned = 0.219856 Jy
! Component: 550  -  total flux cleaned = 0.235047 Jy
! Component: 600  -  total flux cleaned = 0.250021 Jy
! Component: 650  -  total flux cleaned = 0.260255 Jy
! Component: 700  -  total flux cleaned = 0.271497 Jy
! Component: 750  -  total flux cleaned = 0.2826 Jy
! Component: 800  -  total flux cleaned = 0.296858 Jy
! Component: 850  -  total flux cleaned = 0.308786 Jy
! Component: 900  -  total flux cleaned = 0.321637 Jy
! Component: 950  -  total flux cleaned = 0.330104 Jy
! Component: 1000  -  total flux cleaned = 0.339555 Jy
! Component: 1050  -  total flux cleaned = 0.34994 Jy
! Component: 1100  -  total flux cleaned = 0.357144 Jy
! Component: 1150  -  total flux cleaned = 0.365288 Jy
! Component: 1200  -  total flux cleaned = 0.37537 Jy
! Component: 1250  -  total flux cleaned = 0.38535 Jy
! Component: 1300  -  total flux cleaned = 0.391274 Jy
! Component: 1350  -  total flux cleaned = 0.4001 Jy
! Component: 1400  -  total flux cleaned = 0.408838 Jy
! Component: 1450  -  total flux cleaned = 0.417496 Jy
! Component: 1500  -  total flux cleaned = 0.422268 Jy
! Component: 1550  -  total flux cleaned = 0.427951 Jy
! Component: 1600  -  total flux cleaned = 0.434528 Jy
! Component: 1650  -  total flux cleaned = 0.443853 Jy
! Component: 1700  -  total flux cleaned = 0.447556 Jy
! Component: 1750  -  total flux cleaned = 0.455796 Jy
! Component: 1800  -  total flux cleaned = 0.466699 Jy
! Component: 1850  -  total flux cleaned = 0.470288 Jy
! Component: 1900  -  total flux cleaned = 0.476549 Jy
! Component: 1950  -  total flux cleaned = 0.48631 Jy
! Component: 2000  -  total flux cleaned = 0.494237 Jy
! Component: 2050  -  total flux cleaned = 0.498608 Jy
! Component: 2100  -  total flux cleaned = 0.507291 Jy
! Component: 2150  -  total flux cleaned = 0.515894 Jy
! Component: 2200  -  total flux cleaned = 0.518464 Jy
! Component: 2250  -  total flux cleaned = 0.526101 Jy
! Component: 2300  -  total flux cleaned = 0.531152 Jy
! Component: 2350  -  total flux cleaned = 0.538688 Jy
! Component: 2400  -  total flux cleaned = 0.544507 Jy
! Component: 2450  -  total flux cleaned = 0.549468 Jy
! Component: 2500  -  total flux cleaned = 0.559296 Jy
! Component: 2550  -  total flux cleaned = 0.563358 Jy
! Component: 2600  -  total flux cleaned = 0.564965 Jy
! Component: 2650  -  total flux cleaned = 0.572989 Jy
! Component: 2700  -  total flux cleaned = 0.576179 Jy
! Component: 2750  -  total flux cleaned = 0.58251 Jy
! Component: 2800  -  total flux cleaned = 0.591952 Jy
! Component: 2850  -  total flux cleaned = 0.592731 Jy
! Component: 2900  -  total flux cleaned = 0.596619 Jy
! Component: 2950  -  total flux cleaned = 0.602785 Jy
! Component: 3000  -  total flux cleaned = 0.606615 Jy
! Component: 3050  -  total flux cleaned = 0.611187 Jy
! Component: 3100  -  total flux cleaned = 0.614962 Jy
! Component: 3150  -  total flux cleaned = 0.619461 Jy
! Component: 3200  -  total flux cleaned = 0.623195 Jy
! Component: 3250  -  total flux cleaned = 0.626159 Jy
! Component: 3300  -  total flux cleaned = 0.630584 Jy
! Component: 3350  -  total flux cleaned = 0.634254 Jy
! Component: 3400  -  total flux cleaned = 0.640095 Jy
! Component: 3450  -  total flux cleaned = 0.643716 Jy
! Component: 3500  -  total flux cleaned = 0.646608 Jy
! Component: 3550  -  total flux cleaned = 0.650909 Jy
! Component: 3600  -  total flux cleaned = 0.655189 Jy
! Component: 3650  -  total flux cleaned = 0.661574 Jy
! Component: 3700  -  total flux cleaned = 0.662277 Jy
! Component: 3750  -  total flux cleaned = 0.668594 Jy
! Component: 3800  -  total flux cleaned = 0.670686 Jy
! Component: 3850  -  total flux cleaned = 0.674853 Jy
! Component: 3900  -  total flux cleaned = 0.67761 Jy
! Component: 3950  -  total flux cleaned = 0.67967 Jy
! Component: 4000  -  total flux cleaned = 0.683777 Jy
! Component: 4050  -  total flux cleaned = 0.687183 Jy
! Total flux subtracted in 4096 components = 0.691924 Jy
! Clean residual min=-0.033796 max=0.041783 Jy/beam
! Clean residual mean=-0.000273 rms=0.012895 Jy/beam
! Combined flux in latest and established models = 5.87712 Jy
keep
! Adding 374 model components to the UV plane model.
! The established model now contains 506 components and 5.87712 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s5272a_uvs/J0136+4751_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.144 x 1.534 at 7.387 degrees (North through East)
! Clean map  min=-0.054621  max=3.9507 Jy/beam
! Writing clean map to FITS file: /scr/pima/s5272a_uvs/J0136+4751_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 3.95068 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0129286 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.981749 0.981749 1.9635 3.927 7.85399 15.708 31.416 62.8319
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0387 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       3.95 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  305.577 
quit
! Quitting program
! Log file /scr/pima/s5272a_uvs/J0136+4751_X_uvs.log closed on Mon Dec 16 09:33:43 2013