! Started logfile: /g0/scr/pima/s4195c_uvs/J2356+4036_X_uvs.log on Tue Dec 31 20:00:47 2013
obs /g0/scr/pima/s4195c_uvs/J2356+4036_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/s4195c_uvs/J2356+4036_X_uva.fits
! AN table 1: 22 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.952922 visibilities/baseline/integration-bin.
! Found source: J2356+4036
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4696 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/s4195c_uvs/J2356+4036_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000445Jy  sigma=1.033106
! Fit after  self-cal, rms=0.984549Jy  sigma=1.010253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8961 mas, bmaj=2.023 mas, bpa=21.32 degrees
! Estimated noise=21.8374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142285 Jy
! Component: 100  -  total flux cleaned = 0.0181233 Jy
! Total flux subtracted in 100 components = 0.0181233 Jy
! Clean residual min=-0.002192 max=0.002112 Jy/beam
! Clean residual mean=-0.000000 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.0181233 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0181233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018237Jy  sigma=0.019613
! Fit after  self-cal, rms=0.014647Jy  sigma=0.016363
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00416885 Jy
! Component: 100  -  total flux cleaned = 0.00529415 Jy
! Total flux subtracted in 100 components = 0.00529415 Jy
! Clean residual min=-0.001874 max=0.001736 Jy/beam
! Clean residual mean=-0.000000 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0234174 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 11 components and 0.0234174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014815Jy  sigma=0.014510
! Fit after  self-cal, rms=0.014812Jy  sigma=0.014499
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.164 mas, bmaj=2.277 mas, bpa=17.88 degrees
! Estimated noise=11.0326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00080355 Jy
! Component: 100  -  total flux cleaned = 0.00115044 Jy
! Component: 150  -  total flux cleaned = 0.00122099 Jy
! Component: 200  -  total flux cleaned = 0.0012724 Jy
! Total flux subtracted in 200 components = 0.0012724 Jy
! Clean residual min=-0.001089 max=0.000711 Jy/beam
! Clean residual mean=-0.000001 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0246898 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.0246898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014822Jy  sigma=0.014396
! Fit after  self-cal, rms=0.014822Jy  sigma=0.014394
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.164 x 2.277 at 17.88 degrees (North through East)
! Clean map  min=-0.0010523  max=0.021946 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        0.94     KP        0.94     LA        1.02     
!   NL        0.99     OV        1.05     PT        0.87     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.88     KP        0.84     LA        0.93     
!   NL        1.00     OV        0.87     PT        0.93     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     HN        0.93     KP        0.93     LA        1.03     
!   NL        0.98     OV        0.95     PT        0.91     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     HN        0.90     KP        1.02     LA        0.96     
!   NL        0.96     OV        1.01     PT        0.85     SC        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.94     KP        1.04     LA        1.02     
!   NL        1.04     OV        1.07     PT        0.92     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     HN        0.89     KP        0.99     LA        0.87     
!   NL        1.03     OV        0.98     PT        0.87     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     HN        0.86     KP        1.04     LA        0.89     
!   NL        0.97     OV        1.04     PT        0.86     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.014822Jy  sigma=0.014394
! Fit after  self-cal, rms=0.014087Jy  sigma=0.013994
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.163 mas, bmaj=2.269 mas, bpa=17.54 degrees
! Estimated noise=10.0891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00150587 Jy
! Component: 100  -  total flux cleaned = -0.00183917 Jy
! Component: 150  -  total flux cleaned = -0.00183269 Jy
! Component: 200  -  total flux cleaned = -0.00183698 Jy
! Total flux subtracted in 200 components = -0.00183698 Jy
! Clean residual min=-0.000772 max=0.000645 Jy/beam
! Clean residual mean=-0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0228528 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.0228528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013557Jy  sigma=0.014217
! Fit after  self-cal, rms=0.013562Jy  sigma=0.014213
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013562Jy  sigma=0.014213
! Fit after  self-cal, rms=0.013075Jy  sigma=0.013944
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.158 mas, bmaj=2.26 mas, bpa=17.68 degrees
! Estimated noise=9.36337 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119085 Jy
! Component: 100  -  total flux cleaned = -0.00144158 Jy
! Component: 150  -  total flux cleaned = -0.00143652 Jy
! Component: 200  -  total flux cleaned = -0.00142772 Jy
! Total flux subtracted in 200 components = -0.00142772 Jy
! Clean residual min=-0.000641 max=0.000588 Jy/beam
! Clean residual mean=-0.000000 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0214251 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 40 components and 0.0214251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012689Jy  sigma=0.014136
! Fit after  self-cal, rms=0.012702Jy  sigma=0.014133
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.26329e-06 Jy
! Component: 100  -  total flux cleaned = 4.2463e-06 Jy
! Component: 150  -  total flux cleaned = 1.03983e-05 Jy
! Component: 200  -  total flux cleaned = 1.30237e-05 Jy
! Total flux subtracted in 200 components = 1.30237e-05 Jy
! Clean residual min=-0.000639 max=0.000578 Jy/beam
! Clean residual mean=-0.000000 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.0214381 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 48 components and 0.0214381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012693Jy  sigma=0.014139
! Fit after  self-cal, rms=0.012695Jy  sigma=0.014138
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012695Jy  sigma=0.014138
! Fit after  self-cal, rms=0.012305Jy  sigma=0.014059
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.159 mas, bmaj=2.247 mas, bpa=17.75 degrees
! Estimated noise=8.76938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00097028 Jy
! Component: 100  -  total flux cleaned = -0.0012214 Jy
! Component: 150  -  total flux cleaned = -0.00124545 Jy
! Component: 200  -  total flux cleaned = -0.00125007 Jy
! Total flux subtracted in 200 components = -0.00125007 Jy
! Clean residual min=-0.000606 max=0.000534 Jy/beam
! Clean residual mean=0.000000 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.0201881 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.0201881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012015Jy  sigma=0.014222
! Fit after  self-cal, rms=0.012019Jy  sigma=0.014221
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.06635e-06 Jy
! Component: 100  -  total flux cleaned = 4.45594e-07 Jy
! Component: 150  -  total flux cleaned = 2.89161e-06 Jy
! Component: 200  -  total flux cleaned = 7.7222e-06 Jy
! Total flux subtracted in 200 components = 7.7222e-06 Jy
! Clean residual min=-0.000602 max=0.000527 Jy/beam
! Clean residual mean=0.000000 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.0201958 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.0201958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012009Jy  sigma=0.014228
! Fit after  self-cal, rms=0.012010Jy  sigma=0.014228
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012010Jy  sigma=0.014228
! Fit after  self-cal, rms=0.011680Jy  sigma=0.014145
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=2.916 mas, bpa=4.241 degrees
! Estimated noise=9.71881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000831993 Jy
! Component: 100  -  total flux cleaned = -0.00102891 Jy
! Component: 150  -  total flux cleaned = -0.00104768 Jy
! Component: 200  -  total flux cleaned = -0.00104552 Jy
! Total flux subtracted in 200 components = -0.00104552 Jy
! Clean residual min=-0.000721 max=0.000602 Jy/beam
! Clean residual mean=0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.0191503 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 55 components and 0.0191503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011443Jy  sigma=0.014298
! Fit after  self-cal, rms=0.011444Jy  sigma=0.014298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.0545e-06 Jy
! Component: 100  -  total flux cleaned = 9.2334e-06 Jy
! Component: 150  -  total flux cleaned = 1.65166e-05 Jy
! Component: 200  -  total flux cleaned = 1.95981e-05 Jy
! Total flux subtracted in 200 components = 1.95981e-05 Jy
! Clean residual min=-0.000716 max=0.000597 Jy/beam
! Clean residual mean=0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.0191699 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 60 components and 0.0191699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011439Jy  sigma=0.014304
! Fit after  self-cal, rms=0.011440Jy  sigma=0.014303
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.157 mas, bmaj=2.239 mas, bpa=17.87 degrees
! Estimated noise=8.26161 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.157 x 2.239 at 17.87 degrees (North through East)
! Clean map  min=-0.0005531  max=0.016386 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8944 mas, bmaj=1.983 mas, bpa=21.27 degrees
! Estimated noise=16.1139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127491 Jy
! Component: 100  -  total flux cleaned = 0.0157664 Jy
! Component: 150  -  total flux cleaned = 0.016943 Jy
! Component: 200  -  total flux cleaned = 0.0176191 Jy
! Total flux subtracted in 200 components = 0.0176191 Jy
! Clean residual min=-0.001243 max=0.001226 Jy/beam
! Clean residual mean=0.000000 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.0176191 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0176191 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.157 mas, bmaj=2.239 mas, bpa=17.87 degrees
! Estimated noise=8.26161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000704345 Jy
! Component: 100  -  total flux cleaned = 0.00103819 Jy
! Component: 150  -  total flux cleaned = 0.00123743 Jy
! Component: 200  -  total flux cleaned = 0.0013343 Jy
! Total flux subtracted in 200 components = 0.0013343 Jy
! Clean residual min=-0.000591 max=0.000518 Jy/beam
! Clean residual mean=0.000000 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.0189534 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.0189534 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=2.916 mas, bpa=4.241 degrees
! Estimated noise=9.71881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143769 Jy
! Component: 100  -  total flux cleaned = 0.000162023 Jy
! Component: 150  -  total flux cleaned = 0.00016963 Jy
! Component: 200  -  total flux cleaned = 0.000176302 Jy
! Total flux subtracted in 200 components = 0.000176302 Jy
! Clean residual min=-0.000720 max=0.000607 Jy/beam
! Clean residual mean=0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.0191297 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.72313e-06 Jy
! Component: 100  -  total flux cleaned = 1.07187e-05 Jy
! Component: 150  -  total flux cleaned = 1.36683e-05 Jy
! Component: 200  -  total flux cleaned = 1.63111e-05 Jy
! Total flux subtracted in 200 components = 1.63111e-05 Jy
! Clean residual min=-0.000714 max=0.000602 Jy/beam
! Clean residual mean=0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.019146 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.019146 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.157 mas, bmaj=2.239 mas, bpa=17.87 degrees
! Estimated noise=8.26161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.45724e-05 Jy
! Component: 100  -  total flux cleaned = -3.49924e-05 Jy
! Component: 150  -  total flux cleaned = -4.47986e-05 Jy
! Component: 200  -  total flux cleaned = -5.05994e-05 Jy
! Total flux subtracted in 200 components = -5.05994e-05 Jy
! Clean residual min=-0.000577 max=0.000521 Jy/beam
! Clean residual mean=0.000000 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.0190954 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.0190954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011440Jy  sigma=0.014305
! Fit after  self-cal, rms=0.011441Jy  sigma=0.014304
wmodel /g0/scr/pima/s4195c_uvs/J2356+4036_X_map.mod
! Writing 50 model components to file: /g0/scr/pima/s4195c_uvs/J2356+4036_X_map.mod
wobs /g0/scr/pima/s4195c_uvs/J2356+4036_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/s4195c_uvs/J2356+4036_X_uvs.fits
wwins /g0/scr/pima/s4195c_uvs/J2356+4036_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/s4195c_uvs/J2356+4036_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000180137 Jy
! Component: 100  -  total flux cleaned = -0.00017083 Jy
! Component: 150  -  total flux cleaned = -0.000179335 Jy
! Component: 200  -  total flux cleaned = -0.000179313 Jy
! Component: 250  -  total flux cleaned = -0.000171313 Jy
! Component: 300  -  total flux cleaned = -0.000163709 Jy
! Component: 350  -  total flux cleaned = -0.000148873 Jy
! Component: 400  -  total flux cleaned = -0.00012712 Jy
! Component: 450  -  total flux cleaned = -0.000105962 Jy
! Component: 500  -  total flux cleaned = -9.21383e-05 Jy
! Component: 550  -  total flux cleaned = -9.23165e-05 Jy
! Component: 600  -  total flux cleaned = -9.2522e-05 Jy
! Component: 650  -  total flux cleaned = -9.27584e-05 Jy
! Component: 700  -  total flux cleaned = -0.000111842 Jy
! Component: 750  -  total flux cleaned = -0.000124288 Jy
! Component: 800  -  total flux cleaned = -0.000136397 Jy
! Component: 850  -  total flux cleaned = -0.000136317 Jy
! Component: 900  -  total flux cleaned = -0.000124797 Jy
! Component: 950  -  total flux cleaned = -0.000124839 Jy
! Component: 1000  -  total flux cleaned = -0.000141687 Jy
! Component: 1050  -  total flux cleaned = -0.000124986 Jy
! Component: 1100  -  total flux cleaned = -0.000146876 Jy
! Component: 1150  -  total flux cleaned = -0.000136109 Jy
! Component: 1200  -  total flux cleaned = -0.000136149 Jy
! Component: 1250  -  total flux cleaned = -0.000141462 Jy
! Component: 1300  -  total flux cleaned = -0.000151827 Jy
! Component: 1350  -  total flux cleaned = -0.000146716 Jy
! Component: 1400  -  total flux cleaned = -0.000136635 Jy
! Component: 1450  -  total flux cleaned = -0.000141606 Jy
! Component: 1500  -  total flux cleaned = -0.00013172 Jy
! Component: 1550  -  total flux cleaned = -0.000112272 Jy
! Component: 1600  -  total flux cleaned = -0.000131423 Jy
! Component: 1650  -  total flux cleaned = -0.000126599 Jy
! Component: 1700  -  total flux cleaned = -0.000112624 Jy
! Component: 1750  -  total flux cleaned = -0.000121925 Jy
! Component: 1800  -  total flux cleaned = -0.000117317 Jy
! Component: 1850  -  total flux cleaned = -9.91832e-05 Jy
! Component: 1900  -  total flux cleaned = -9.47247e-05 Jy
! Component: 1950  -  total flux cleaned = -0.000103602 Jy
! Component: 2000  -  total flux cleaned = -9.03854e-05 Jy
! Component: 2050  -  total flux cleaned = -0.000103341 Jy
! Component: 2100  -  total flux cleaned = -8.17686e-05 Jy
! Component: 2150  -  total flux cleaned = -7.75384e-05 Jy
! Component: 2200  -  total flux cleaned = -8.59661e-05 Jy
! Component: 2250  -  total flux cleaned = -6.92516e-05 Jy
! Component: 2300  -  total flux cleaned = -5.27238e-05 Jy
! Component: 2350  -  total flux cleaned = -4.85964e-05 Jy
! Component: 2400  -  total flux cleaned = -4.05203e-05 Jy
! Component: 2450  -  total flux cleaned = -3.25004e-05 Jy
! Component: 2500  -  total flux cleaned = -2.45485e-05 Jy
! Component: 2550  -  total flux cleaned = -1.6686e-05 Jy
! Component: 2600  -  total flux cleaned = 6.82553e-06 Jy
! Component: 2650  -  total flux cleaned = -4.83151e-06 Jy
! Component: 2700  -  total flux cleaned = -4.87539e-06 Jy
! Component: 2750  -  total flux cleaned = -8.72151e-06 Jy
! Component: 2800  -  total flux cleaned = 1.40836e-05 Jy
! Component: 2850  -  total flux cleaned = 1.40966e-05 Jy
! Component: 2900  -  total flux cleaned = 2.90655e-05 Jy
! Component: 2950  -  total flux cleaned = 2.16364e-05 Jy
! Component: 3000  -  total flux cleaned = 3.27332e-05 Jy
! Component: 3050  -  total flux cleaned = 2.90956e-05 Jy
! Component: 3100  -  total flux cleaned = 5.08558e-05 Jy
! Component: 3150  -  total flux cleaned = 4.72372e-05 Jy
! Component: 3200  -  total flux cleaned = 4.72151e-05 Jy
! Component: 3250  -  total flux cleaned = 5.42939e-05 Jy
! Component: 3300  -  total flux cleaned = 5.78069e-05 Jy
! Component: 3350  -  total flux cleaned = 5.7839e-05 Jy
! Component: 3400  -  total flux cleaned = 6.8294e-05 Jy
! Component: 3450  -  total flux cleaned = 6.13642e-05 Jy
! Component: 3500  -  total flux cleaned = 5.45036e-05 Jy
! Component: 3550  -  total flux cleaned = 5.44827e-05 Jy
! Component: 3600  -  total flux cleaned = 5.11215e-05 Jy
! Component: 3650  -  total flux cleaned = 5.44888e-05 Jy
! Component: 3700  -  total flux cleaned = 5.78469e-05 Jy
! Component: 3750  -  total flux cleaned = 5.1183e-05 Jy
! Component: 3800  -  total flux cleaned = 7.44574e-05 Jy
! Component: 3850  -  total flux cleaned = 7.11938e-05 Jy
! Component: 3900  -  total flux cleaned = 7.77986e-05 Jy
! Component: 3950  -  total flux cleaned = 7.45252e-05 Jy
! Component: 4000  -  total flux cleaned = 7.7821e-05 Jy
! Component: 4050  -  total flux cleaned = 9.40212e-05 Jy
! Total flux subtracted in 4096 components = 0.000103675 Jy
! Clean residual min=-0.000219 max=0.000179 Jy/beam
! Clean residual mean=0.000000 rms=0.000057 Jy/beam
! Combined flux in latest and established models = 0.019199 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 372 components and 0.0191991 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/s4195c_uvs/J2356+4036_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.157 x 2.239 at 17.87 degrees (North through East)
! Clean map  min=-0.0003412  max=0.016423 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/s4195c_uvs/J2356+4036_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0164227 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.71676e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04431 1.04431 2.08861 4.17722 8.35444 16.7089 33.4178 66.8355
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.016 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  287.272 
quit
! Quitting program
! Log file /g0/scr/pima/s4195c_uvs/J2356+4036_X_uvs.log closed on Tue Dec 31 20:00:53 2013