! Started logfile: ./J1959+4213_X_uvs.log on Mon Oct 28 15:40:10 2013
obs J1959+4213_X_uva.fits
! Reading UV FITS file: J1959+4213_X_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! AN table 2: 16 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.933692 visibilities/baseline/integration-bin.
! Found source: J1959+4213
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet ./J1959+4213_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.115592Jy  sigma=24.653966
! Fit after  self-cal, rms=0.497619Jy  sigma=9.798337
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9761 mas, bmaj=2.023 mas, bpa=10.8 degrees
! Estimated noise=0.794721 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.382412 Jy
! Component: 100  -  total flux cleaned = 0.487138 Jy
! Total flux subtracted in 100 components = 0.487138 Jy
! Clean residual min=-0.018128 max=0.044355 Jy/beam
! Clean residual mean=-0.000107 rms=0.005141 Jy/beam
! Combined flux in latest and established models = 0.487138 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.487138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107193Jy  sigma=2.831199
! Fit after  self-cal, rms=0.107272Jy  sigma=2.828859
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0489524 Jy
! Component: 100  -  total flux cleaned = 0.0749435 Jy
! Total flux subtracted in 100 components = 0.0749435 Jy
! Clean residual min=-0.014180 max=0.030182 Jy/beam
! Clean residual mean=-0.000067 rms=0.003392 Jy/beam
! Combined flux in latest and established models = 0.562081 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.562081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075484Jy  sigma=1.878841
! Fit after  self-cal, rms=0.075468Jy  sigma=1.875218
! Inverting map 
! Added new window around map position (-1.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026743 Jy
! Component: 100  -  total flux cleaned = 0.0398199 Jy
! Total flux subtracted in 100 components = 0.0398199 Jy
! Clean residual min=-0.012962 max=0.015569 Jy/beam
! Clean residual mean=-0.000049 rms=0.002738 Jy/beam
! Combined flux in latest and established models = 0.601901 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.601901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063669Jy  sigma=1.532745
! Fit after  self-cal, rms=0.062055Jy  sigma=1.508682
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.359 mas, bmaj=2.278 mas, bpa=6.556 degrees
! Estimated noise=0.368628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202224 Jy
! Component: 100  -  total flux cleaned = 0.0319297 Jy
! Component: 150  -  total flux cleaned = 0.0396402 Jy
! Component: 200  -  total flux cleaned = 0.0448855 Jy
! Total flux subtracted in 200 components = 0.0448855 Jy
! Clean residual min=-0.011660 max=0.014151 Jy/beam
! Clean residual mean=-0.000065 rms=0.003160 Jy/beam
! Combined flux in latest and established models = 0.646786 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 63 components and 0.646787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056832Jy  sigma=1.317534
! Fit after  self-cal, rms=0.056192Jy  sigma=1.306888
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.12     HN        0.92     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.04     OV        1.05     
!   PT        0.87     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.14     HN        0.96     KP        0.99     
!   LA        1.02     NL        1.04     OV        1.05     PT        0.87     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.90     KP        0.97     
!   LA        0.95     MK        1.04     NL        1.04     OV        0.96     
!   PT        0.89     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.02     HN        0.93     KP        0.97     
!   LA        0.96     NL        1.03     OV        0.96     PT        0.89     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.13     HN        0.95     KP        1.08     
!   LA        0.94     MK        1.09     NL        1.03     OV        1.06     
!   PT        0.92     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.83     FD        1.15     HN        0.99     KP        1.09     
!   LA        0.94     NL        1.03     OV        1.06     PT        0.92     
!   SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.12     HN        0.99     KP        0.94     
!   LA        0.96     MK        1.10     NL        1.00     OV        1.03     
!   PT        0.96     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.13     HN        1.02     KP        0.95     
!   LA        0.98     NL        0.99     OV        1.03     PT        0.95     
!   SC        1.08     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        0.95     KP        1.06     
!   LA        0.97     MK        0.97     NL        0.96     OV        1.01     
!   PT        0.90     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        1.04     HN        1.00     KP        1.08     
!   LA        0.98     NL        0.95     OV        1.01     PT        0.90     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.04     KP        1.06     
!   LA        1.02     MK        1.00     NL        1.01     OV        1.11     
!   PT        0.94     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.07     HN        1.09     KP        1.07     
!   LA        1.04     NL        1.01     OV        1.10     PT        0.93     
!   SC        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.98     KP        1.02     
!   LA        0.93     MK        0.99     NL        1.02     OV        1.10     
!   PT        0.91     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.05     HN        1.02     KP        1.02     
!   LA        0.94     NL        1.03     OV        1.09     PT        0.90     
!   SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.03     HN        0.98     KP        1.08     
!   LA        0.88     MK        0.97     NL        1.00     OV        1.10     
!   PT        0.86     SC        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     FD        1.06     HN        1.01     KP        1.08     
!   LA        0.89     NL        0.99     OV        1.09     PT        0.85     
!   SC        1.17     
! 
! 
! Fit before self-cal, rms=0.056192Jy  sigma=1.306888
! Fit after  self-cal, rms=0.024717Jy  sigma=0.450629
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.369 mas, bmaj=2.288 mas, bpa=6.542 degrees
! Estimated noise=0.368685 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110523 Jy
! Component: 100  -  total flux cleaned = -0.00138224 Jy
! Component: 150  -  total flux cleaned = -0.00155623 Jy
! Component: 200  -  total flux cleaned = -0.00165752 Jy
! Total flux subtracted in 200 components = -0.00165752 Jy
! Clean residual min=-0.002725 max=0.002581 Jy/beam
! Clean residual mean=-0.000001 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.645129 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.645129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024234Jy  sigma=0.444624
! Fit after  self-cal, rms=0.024198Jy  sigma=0.443612
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024198Jy  sigma=0.443612
! Fit after  self-cal, rms=0.024180Jy  sigma=0.442621
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.371 mas, bmaj=2.288 mas, bpa=6.489 degrees
! Estimated noise=0.368471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129127 Jy
! Component: 100  -  total flux cleaned = -0.00144755 Jy
! Component: 150  -  total flux cleaned = -0.00154168 Jy
! Component: 200  -  total flux cleaned = -0.00166503 Jy
! Total flux subtracted in 200 components = -0.00166503 Jy
! Clean residual min=-0.002567 max=0.002583 Jy/beam
! Clean residual mean=-0.000001 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.643464 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.643464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023857Jy  sigma=0.438873
! Fit after  self-cal, rms=0.023820Jy  sigma=0.438304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158059 Jy
! Component: 100  -  total flux cleaned = -0.000231065 Jy
! Component: 150  -  total flux cleaned = -0.000333212 Jy
! Component: 200  -  total flux cleaned = -0.000365841 Jy
! Total flux subtracted in 200 components = -0.000365841 Jy
! Clean residual min=-0.002499 max=0.002557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.643098 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.643098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023667Jy  sigma=0.436387
! Fit after  self-cal, rms=0.023651Jy  sigma=0.436143
! Inverting map 
! Added new window around map position (-9.4, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000791854 Jy
! Component: 100  -  total flux cleaned = 0.00150885 Jy
! Component: 150  -  total flux cleaned = 0.00215182 Jy
! Component: 200  -  total flux cleaned = 0.00261935 Jy
! Total flux subtracted in 200 components = 0.00261935 Jy
! Clean residual min=-0.002294 max=0.002078 Jy/beam
! Clean residual mean=-0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.645718 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 89 components and 0.645718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023198Jy  sigma=0.429451
! Fit after  self-cal, rms=0.023190Jy  sigma=0.429082
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023190Jy  sigma=0.429082
! Fit after  self-cal, rms=0.023145Jy  sigma=0.427504
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.373 mas, bmaj=2.29 mas, bpa=6.443 degrees
! Estimated noise=0.368264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000372971 Jy
! Component: 100  -  total flux cleaned = -0.000146999 Jy
! Component: 150  -  total flux cleaned = -2.76562e-05 Jy
! Component: 200  -  total flux cleaned = 4.67401e-05 Jy
! Total flux subtracted in 200 components = 4.67401e-05 Jy
! Clean residual min=-0.002058 max=0.002068 Jy/beam
! Clean residual mean=0.000000 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.645764 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 100 components and 0.645765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022914Jy  sigma=0.425046
! Fit after  self-cal, rms=0.022902Jy  sigma=0.424905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.4, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000388552 Jy
! Component: 100  -  total flux cleaned = 0.000223734 Jy
! Component: 150  -  total flux cleaned = 2.21402e-05 Jy
! Component: 200  -  total flux cleaned = -2.29692e-05 Jy
! Total flux subtracted in 200 components = -2.29692e-05 Jy
! Clean residual min=-0.002047 max=0.001715 Jy/beam
! Clean residual mean=0.000000 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.645742 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 116 components and 0.645742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022539Jy  sigma=0.420341
! Fit after  self-cal, rms=0.022542Jy  sigma=0.420142
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022542Jy  sigma=0.420142
! Fit after  self-cal, rms=0.022517Jy  sigma=0.419420
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.441 mas, bmaj=2.947 mas, bpa=-15.19 degrees
! Estimated noise=0.380372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000371414 Jy
! Component: 100  -  total flux cleaned = -0.000318936 Jy
! Component: 150  -  total flux cleaned = -0.000248413 Jy
! Component: 200  -  total flux cleaned = -0.000189512 Jy
! Total flux subtracted in 200 components = -0.000189512 Jy
! Clean residual min=-0.001477 max=0.001279 Jy/beam
! Clean residual mean=0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.645552 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 132 components and 0.645552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022451Jy  sigma=0.418487
! Fit after  self-cal, rms=0.022431Jy  sigma=0.418425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.83372e-05 Jy
! Component: 100  -  total flux cleaned = -2.84606e-05 Jy
! Component: 150  -  total flux cleaned = -1.12448e-05 Jy
! Component: 200  -  total flux cleaned = -1.12672e-05 Jy
! Total flux subtracted in 200 components = -1.12672e-05 Jy
! Clean residual min=-0.001465 max=0.001313 Jy/beam
! Clean residual mean=0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.645541 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 140 components and 0.645541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022396Jy  sigma=0.417867
! Fit after  self-cal, rms=0.022389Jy  sigma=0.417851
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.374 mas, bmaj=2.29 mas, bpa=6.443 degrees
! Estimated noise=0.367934 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.374 x 2.29 at 6.443 degrees (North through East)
! Clean map  min=-0.0027416  max=0.52088 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022389Jy  sigma=0.417851
! Fit after  self-cal, rms=0.018519Jy  sigma=0.322781
! Inverting map and beam 
! Estimated beam: bmin=1.375 mas, bmaj=2.29 mas, bpa=6.436 degrees
! Estimated noise=0.367819 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000342028 Jy
! Component: 100  -  total flux cleaned = -0.000301055 Jy
! Component: 150  -  total flux cleaned = -0.000264441 Jy
! Component: 200  -  total flux cleaned = -0.000264785 Jy
! Total flux subtracted in 200 components = -0.000264785 Jy
! Clean residual min=-0.001995 max=0.001787 Jy/beam
! Clean residual mean=0.000000 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.645276 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 152 components and 0.645276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018292Jy  sigma=0.320084
! Fit after  self-cal, rms=0.018285Jy  sigma=0.319976
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.73111e-05 Jy
! Component: 100  -  total flux cleaned = 9.03136e-05 Jy
! Component: 150  -  total flux cleaned = 0.000121557 Jy
! Component: 200  -  total flux cleaned = 0.000152084 Jy
! Total flux subtracted in 200 components = 0.000152084 Jy
! Clean residual min=-0.001997 max=0.001685 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.645428 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 164 components and 0.645428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018131Jy  sigma=0.318303
! Fit after  self-cal, rms=0.018129Jy  sigma=0.318268
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018129Jy  sigma=0.318268
! Fit after  self-cal, rms=0.018122Jy  sigma=0.318003
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9883 mas, bmaj=2.026 mas, bpa=10.66 degrees
! Estimated noise=0.804747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.387519 Jy
! Component: 100  -  total flux cleaned = 0.490463 Jy
! Component: 150  -  total flux cleaned = 0.541009 Jy
! Component: 200  -  total flux cleaned = 0.570165 Jy
! Total flux subtracted in 200 components = 0.570165 Jy
! Clean residual min=-0.006816 max=0.015012 Jy/beam
! Clean residual mean=-0.000037 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 0.570165 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.570165 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.375 mas, bmaj=2.29 mas, bpa=6.437 degrees
! Estimated noise=0.367643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0283137 Jy
! Component: 100  -  total flux cleaned = 0.0429083 Jy
! Component: 150  -  total flux cleaned = 0.0516029 Jy
! Component: 200  -  total flux cleaned = 0.0571016 Jy
! Total flux subtracted in 200 components = 0.0571016 Jy
! Clean residual min=-0.002661 max=0.003644 Jy/beam
! Clean residual mean=-0.000014 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.627267 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 60 components and 0.627267 Jy
! Inverting map 
! Added new window around map position (18.6, 32.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348124 Jy
! Component: 100  -  total flux cleaned = 0.00524696 Jy
! Component: 150  -  total flux cleaned = 0.00659838 Jy
! Component: 200  -  total flux cleaned = 0.00785504 Jy
! Total flux subtracted in 200 components = 0.00785504 Jy
! Clean residual min=-0.002374 max=0.002500 Jy/beam
! Clean residual mean=-0.000006 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.635122 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 79 components and 0.635122 Jy
! Inverting map 
! Added new window around map position (-9.2, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136043 Jy
! Component: 100  -  total flux cleaned = 0.0019117 Jy
! Component: 150  -  total flux cleaned = 0.00235084 Jy
! Component: 200  -  total flux cleaned = 0.00275794 Jy
! Total flux subtracted in 200 components = 0.00275794 Jy
! Clean residual min=-0.002134 max=0.001915 Jy/beam
! Clean residual mean=-0.000004 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.63788 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 103 components and 0.63788 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.442 mas, bmaj=2.948 mas, bpa=-15.22 degrees
! Estimated noise=0.379857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159613 Jy
! Component: 100  -  total flux cleaned = 0.00267664 Jy
! Component: 150  -  total flux cleaned = 0.00329746 Jy
! Component: 200  -  total flux cleaned = 0.00365208 Jy
! Total flux subtracted in 200 components = 0.00365208 Jy
! Clean residual min=-0.001544 max=0.001400 Jy/beam
! Clean residual mean=-0.000003 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.641532 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175687 Jy
! Component: 100  -  total flux cleaned = 0.000310634 Jy
! Component: 150  -  total flux cleaned = 0.000414274 Jy
! Component: 200  -  total flux cleaned = 0.000488129 Jy
! Total flux subtracted in 200 components = 0.000488129 Jy
! Clean residual min=-0.001481 max=0.001309 Jy/beam
! Clean residual mean=-0.000002 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.64202 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 138 components and 0.64202 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.375 mas, bmaj=2.29 mas, bpa=6.437 degrees
! Estimated noise=0.367643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000781392 Jy
! Component: 100  -  total flux cleaned = -0.000881013 Jy
! Component: 150  -  total flux cleaned = -0.000881911 Jy
! Component: 200  -  total flux cleaned = -0.000796152 Jy
! Total flux subtracted in 200 components = -0.000796152 Jy
! Clean residual min=-0.001916 max=0.001622 Jy/beam
! Clean residual mean=-0.000002 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.641224 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 148 components and 0.641224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017946Jy  sigma=0.314890
! Fit after  self-cal, rms=0.017839Jy  sigma=0.313814
wmodel ./J1959+4213_X_map.mod
! Writing 148 model components to file: ./J1959+4213_X_map.mod
wobs ./J1959+4213_X_uvs.fits
! Writing UV FITS file: ./J1959+4213_X_uvs.fits
wwins ./J1959+4213_X_map.win
! wwins: Wrote 6 windows to ./J1959+4213_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000616896 Jy
! Component: 100  -  total flux cleaned = -0.000987935 Jy
! Component: 150  -  total flux cleaned = -0.00134125 Jy
! Component: 200  -  total flux cleaned = -0.00165143 Jy
! Component: 250  -  total flux cleaned = -0.00200412 Jy
! Component: 300  -  total flux cleaned = -0.00223928 Jy
! Component: 350  -  total flux cleaned = -0.00236658 Jy
! Component: 400  -  total flux cleaned = -0.00249113 Jy
! Component: 450  -  total flux cleaned = -0.00258848 Jy
! Component: 500  -  total flux cleaned = -0.00268395 Jy
! Component: 550  -  total flux cleaned = -0.00280051 Jy
! Component: 600  -  total flux cleaned = -0.00291447 Jy
! Component: 650  -  total flux cleaned = -0.00300399 Jy
! Component: 700  -  total flux cleaned = -0.00307012 Jy
! Component: 750  -  total flux cleaned = -0.00307001 Jy
! Component: 800  -  total flux cleaned = -0.00317638 Jy
! Component: 850  -  total flux cleaned = -0.00321785 Jy
! Component: 900  -  total flux cleaned = -0.0032384 Jy
! Component: 950  -  total flux cleaned = -0.00327897 Jy
! Component: 1000  -  total flux cleaned = -0.00325894 Jy
! Component: 1050  -  total flux cleaned = -0.00327882 Jy
! Component: 1100  -  total flux cleaned = -0.00333731 Jy
! Component: 1150  -  total flux cleaned = -0.00331805 Jy
! Component: 1200  -  total flux cleaned = -0.00331819 Jy
! Component: 1250  -  total flux cleaned = -0.0033184 Jy
! Component: 1300  -  total flux cleaned = -0.00331832 Jy
! Component: 1350  -  total flux cleaned = -0.00328195 Jy
! Component: 1400  -  total flux cleaned = -0.0033364 Jy
! Component: 1450  -  total flux cleaned = -0.00331864 Jy
! Component: 1500  -  total flux cleaned = -0.00335397 Jy
! Component: 1550  -  total flux cleaned = -0.00333641 Jy
! Component: 1600  -  total flux cleaned = -0.00338828 Jy
! Component: 1650  -  total flux cleaned = -0.00343936 Jy
! Component: 1700  -  total flux cleaned = -0.00340538 Jy
! Component: 1750  -  total flux cleaned = -0.0033888 Jy
! Component: 1800  -  total flux cleaned = -0.00342191 Jy
! Component: 1850  -  total flux cleaned = -0.00347092 Jy
! Component: 1900  -  total flux cleaned = -0.0035034 Jy
! Component: 1950  -  total flux cleaned = -0.00350331 Jy
! Component: 2000  -  total flux cleaned = -0.00358302 Jy
! Component: 2050  -  total flux cleaned = -0.00361449 Jy
! Component: 2100  -  total flux cleaned = -0.00369273 Jy
! Component: 2150  -  total flux cleaned = -0.00370814 Jy
! Component: 2200  -  total flux cleaned = -0.00378514 Jy
! Component: 2250  -  total flux cleaned = -0.00384614 Jy
! Component: 2300  -  total flux cleaned = -0.00389136 Jy
! Component: 2350  -  total flux cleaned = -0.00392107 Jy
! Component: 2400  -  total flux cleaned = -0.00390615 Jy
! Component: 2450  -  total flux cleaned = -0.00390633 Jy
! Component: 2500  -  total flux cleaned = -0.00396484 Jy
! Component: 2550  -  total flux cleaned = -0.0039794 Jy
! Component: 2600  -  total flux cleaned = -0.00400824 Jy
! Component: 2650  -  total flux cleaned = -0.00407953 Jy
! Component: 2700  -  total flux cleaned = -0.00405135 Jy
! Component: 2750  -  total flux cleaned = -0.0040655 Jy
! Component: 2800  -  total flux cleaned = -0.00409329 Jy
! Component: 2850  -  total flux cleaned = -0.00410715 Jy
! Component: 2900  -  total flux cleaned = -0.00409345 Jy
! Component: 2950  -  total flux cleaned = -0.00416158 Jy
! Component: 3000  -  total flux cleaned = -0.00417512 Jy
! Component: 3050  -  total flux cleaned = -0.00422884 Jy
! Component: 3100  -  total flux cleaned = -0.00420213 Jy
! Component: 3150  -  total flux cleaned = -0.00422865 Jy
! Component: 3200  -  total flux cleaned = -0.00422868 Jy
! Component: 3250  -  total flux cleaned = -0.00428108 Jy
! Component: 3300  -  total flux cleaned = -0.00428112 Jy
! Component: 3350  -  total flux cleaned = -0.00430695 Jy
! Component: 3400  -  total flux cleaned = -0.00434547 Jy
! Component: 3450  -  total flux cleaned = -0.00437094 Jy
! Component: 3500  -  total flux cleaned = -0.00435823 Jy
! Component: 3550  -  total flux cleaned = -0.0044086 Jy
! Component: 3600  -  total flux cleaned = -0.00444605 Jy
! Component: 3650  -  total flux cleaned = -0.00443366 Jy
! Component: 3700  -  total flux cleaned = -0.00443362 Jy
! Component: 3750  -  total flux cleaned = -0.00450717 Jy
! Component: 3800  -  total flux cleaned = -0.00450715 Jy
! Component: 3850  -  total flux cleaned = -0.0045071 Jy
! Component: 3900  -  total flux cleaned = -0.00457931 Jy
! Component: 3950  -  total flux cleaned = -0.00455529 Jy
! Component: 4000  -  total flux cleaned = -0.00460272 Jy
! Component: 4050  -  total flux cleaned = -0.00463801 Jy
! Total flux subtracted in 4096 components = -0.00462631 Jy
! Clean residual min=-0.000663 max=0.000628 Jy/beam
! Clean residual mean=-0.000000 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.636598 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 439 components and 0.636598 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "./J1959+4213_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.375 x 2.29 at 6.437 degrees (North through East)
! Clean map  min=-0.00192  max=0.5219 Jy/beam
! Writing clean map to FITS file: ./J1959+4213_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.521895 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216252 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.124308 0.124308 0.248616 0.497232 0.994463 1.98893 3.97785 7.9557 15.9114 31.8228 63.6456
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.521 
quit
! Quitting program
! Log file ./J1959+4213_X_uvs.log closed on Mon Oct 28 15:40:27 2013